Maps Stop working after install new FW 20

I finish installed the new FW 20 all went smooth after I finish few things s top working:
Maps not working it start show the map and crash (back to the main screen). I total remove it and installed it again; I reload the latest maps as well but still same behavior.
Connectivity -> Destination when I select it does same like Maps return me to the main screen. 
How to fix this problem?
I have no problem to make any full reset and reinstall all as I have nothing on the device and I got all backup as well.

Thanks di hard reset and as you wrote nowit's OK:manhappy:

Similar Messages

  • 3000 j115 A11 stopped working after installing new graphics card

    I thought i would be slick and install a new graphics card (asus GEForce 8500GT) after i put it in my 3000 j115 A11 everything stopped working. I can turn the tower on and it gives two beeps. Nothing displays on the monitor (it doesn't leave powersaving mode). It is also very quiet like it is not even trying to work. Did I just destroy my computer? Is there anything I can do?
    PS. I did take the asus card back out, so I'm not that lucky
    PSS. Got back to being able to boot but now I can't get back into bios to switch from PCI back to original built in card. If I try it just hangs after pressing enter to interupt normal setup
    Message Edited by Lazlo420 on 06-27-2009 12:05 PM
    Note from Moderator:  Gave it a more descriptive subject.
    Message Edited by JaneL on 06-28-2009 01:36 PM

    I find this thread very interesting. I am assuming this system (3000 j115 A11) is the same as one I mentioned in a post from June 12 (7387A11... Graphics upgradeable?).... and is still hanging out there. Perhaps if Lenovo, or anybody else for that matter, could/would provide SPECIFIC upgrade instructions we could all be enlightened. (In my case I do not own a Lenovo computer but I am hoping to help my sister-in-law with her Lenovo and don't look forward to a major meltdown if the systems are not capable of this, otherwise, simple upgrade.)
    Niether of the 2 previous posters mentioned if they upgraded the PS in thier respective systems prior to the graphics card installation (although ala17 "recently" did.). One had issues and the other didn't. If that should be the first step toward the upgrade, it would be helpful to know beforehand.
    Thanks and good luck. Post back if you get to the bottom of it.

  • PS 6 beta stopped working - after installing my old tablet

    PS 6 beta stopped working - after installing my old tablet
    Just to let U know, everywhere else (GIMP,Paint etc) there is no problem,
    also tablet is fully working and operational,
    drivers are up to date,
    PS 6 beta brign an error 01 .
    Also say about contating support ...
    How can I constact support when I Dont have a license or serial number etc..
    since it ask me about it while trying to reach support.... pointless! mad!
    ? What now? should I trash my favorite tablet and buy some junk just because of this BUG?
    or will it be solved somehow?
    I do believe that nobody will even care about one human and none of programmers will update
    database of this program for older tablets,,, but JSUT TO LET U KNOW - its not working.
    and free software as GIMP is working just perfectly, and adobe **** is not even opening a program..

    oh well, as I mentioned my tablet is old, ( but i thought that new version of photoshop will contain also some parts from old ones for compability, as U said its not working like that o.o  ) is is Pentagram Duo Pen (USB)
       I uninstalled tablet drivers and adobe software and reinstalled again without tablet, now it's working so it was a driver that messed up all..
    Oh, the error code nr was : 1 
    i also was suprised but this is what I got from photoshop in error message the rest of it was about contacting adobe.com/support ..blahblahblah
    I am still not fully understanding how its possible that so well paid software is not compatble with my super old tablet while even stupid paint is..
    I am sure it is complicated, however as U see I am not able to anything else but operate with mouse.. or switch to linux and practice in gimp..
    if U wonna to take a look at the file of that driver i will post it here :
    (more files on http://download.pentagram.eu/en/drivers/graphic_tablets/duopen_usb/DuoPen_USB_Win2K_XP.zip)
    Cheers..
    ; Installation inf for Pentagram USB Tablet
    ; (c) Copyright 2000 Pentagram Pte Ltd
    [Version]
    Signature="$CHICAGO$"
    Class=Mouse
    ;Class=USB
    ;ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
    provider=%MSFT%
    DriverVer=08/05/1999
    [SourceDisksNames]
    1="Pentagram USB Tablet Installation Disk",,,
    [SourceDisksFiles]
    MGUSBTAB.sys = 1
    MGUSBTAB.inf = 1
    wintab32.dll=1
    wtmgl.exe=1
    wtdata=1
    mgltab.cpl=1
    [Manufacturer]
    %MfgName%=ModelSection
    [ModelSection]
    %USB\VID_081A&PID_1000.DeviceDesc%=MGUSBTAB.Dev, USB\VID_081A&PID_1000
    ;[PreCopySection]
    ;HKR,,NoSetupUI,,1
    [DestinationDirs]
    MGUSBTAB.Files.Ext = 12,
    MGUSBTAB.Files.Inf = 17,
    MGUSBTAB.Copy             = 11,
    ; DIRID_SYSTEM
    [MGUSBTAB.Dev]
    CopyFiles=MGUSBTAB.Files.Ext, MGUSBTAB.Files.Inf, MGUSBTAB.Copy
    AddReg=MGUSBTAB.AddReg
    [MGUSBTAB.Dev.NT]
    CopyFiles=MGUSBTAB.Files.Ext, MGUSBTAB.Files.Inf, MGUSBTAB.Copy
    AddReg=MGUSBTAB.AddReg
    [MGUSBTAB.Dev.NT.Services]
    Addservice = MGUSBTAB, 0x00000002, MGUSBTAB.AddService
    [MGUSBTAB.AddService]
    DisplayName    = %MGUSBTABLET.SvcDesc%
    ServiceType    = 1                  ; SERVICE_KERNEL_DRIVER
    StartType      = 3                  ; SERVICE_DEMAND_START
    ErrorControl   = 1                  ; SERVICE_ERROR_NORMAL
    ServiceBinary  = %10%\System32\Drivers\MGUSBTAB.sys
    LoadOrderGroup = Base
    [MGUSBTAB.AddReg]
    HKR,,DevLoader,,*ntkern
    HKR,,NTMPDriver,,MGUSBTAB.sys
    ;HKLM,"System\Currentcontrolset\Services\mgusbtab\Parameters","MaximumTransferSize",0x1000 1,4096
    ;HKLM,"System\Currentcontrolset\Services\mgusbtab\Parameters","DebugLevel",0x10001,5
    HKLM,%JX_REGISTRY_PATH%,"NumberOfButtons",0x00010003,3
    HKLM,%JX_REGISTRY_PATH%,"SampleRate",0x00010003,100
    HKLM,%JX_REGISTRY_PATH%,"x1",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"y1",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"x2",0x00010001,15240
    HKLM,%JX_REGISTRY_PATH%,"y2",0x00010001,12700
    HKLM,%JX_REGISTRY_PATH%,"tabletMode",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"xSens",0x00010001,32768
    HKLM,%JX_REGISTRY_PATH%,"ySens",0x00010001,32768
    HKLM,%JX_REGISTRY_PATH%,"clickThreshold",0x00010003,40
    HKLM,%JX_REGISTRY_PATH%,"x1Phys",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"x2Phys",0x00010001,15240
    HKLM,%JX_REGISTRY_PATH%,"y1Phys",0x00010001,0
    HKLM,%JX_REGISTRY_PATH%,"y2Phys",0x00010001,12700
    HKLM,%JX_REGISTRY_PATH%,"mappings",0x00000000,"01 02 04 00 00 00 00 00 "
    HKLM,%JX_REGISTRY_PATH%,"parameter1",0x00000000,"µŇ¬šŤ–šŚß«žť“š‹Äß©šŤŚ–‘ßÎŃĎÉÄßąŤ’ž‹ĹßÉŇ ť†‹šßť–‘žŤ†"
    HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Run,"wtmgl",0,"wtmgl.exe"
    ;for GUID
    ;HKLM,%JX_REGISTRY_PATH%,FriendlyName,,"Pentagram Serial Tablet"
    [MGUSBTAB.Files.Ext]
    MGUSBTAB.sys
    [MGUSBTAB.Files.Inf]
    MGUSBTAB.Inf
    [MGUSBTAB.Copy]
    wintab32.dll
    wtmgl.exe
    wtdata
    mgltab.cpl
    [Strings]
    MSFT="Microsoft"
    MfgName="Pentagram"
    USB\VID_081A&PID_1000.DeviceDesc="Pentagram USB Tablet"
    MGUSBTABLET.SvcDesc="USB Tablet driver"
    JX_REGISTRY_PATH="System\CurrentControlSet\Services\mgltab\Parameters"

  • WiFi stops working after install of latest 10.8.5 update on MacBook 5,1 third time reinstall OS X

    WiFi stops working after install of latest 10.8.5 update on MacBook 5,1 third time reinstall OS.
    MB used as email and surfing tool when on vacation. Worked fine for months. Installed the latest security patch (update) and WiFi quit working. Two days later (still on vacation) WiFi started working again and worked fine for the next 2 days.
    Came home and formatted and reinstalled 10.8.5 and all was fine again. We are selling the MacBook and setup new user, everything worked fine.
    The update came up again so I decided to install it and WiFi instantly stopped working after the restart.
    Does anybody have any idea what is happening.
    Thanks

    Not really, although WiFi has been a longstanding problem for lots of people. I fix for some breaks others.
    However, if you are trying to sell it, you need to revert it back to the OS that shipped with it. You cannot sell your copy of Mountain Lion with the Mac. It is only licensed to you.
    You also need to include the system disks that came with the Mac. If it came with Leopard (10.5), and you have a Snow Leopard (10.6) disk, you can install that if you provide that disk also.

  • Autofill stopped working after installing latest OS Mountail Lion update Can anyone help? I've gone into preferences and

    Autofill has stopped working after installing latest update to OS X Mountail Lion (10.8). Latest of many problems with this OS - wish I had never upgraded to it. Can anyone help?

    Hi Eric, it is Safari but I thunk I've solved it by dragging the autofill into the safari toolbar and clicking on it when I want to use the fearture. Nothing else worked. this OS is a crock as far as I am concerned.

  • Generic PDF writer.  Stopped working after installing Yosemite.

    Generic PDF Writer stopped working after installing Yosemite.  Can anyone help??

    Yes, checked.  The system is up to date.

  • My sound stopped working after installing Java

    my sound stopped working after installing Java

    Make sure Must is not selected in System Preferences > Sound
    Might be corrupted sound preferences ...
    Open the Finder.
    From the Finder menu bar click Go > Go to Folder
    Type or copy/paste:   /Library/Preferences
    Click Go then move the com.apple.soundpref.plist file from the Preferences folder to the Trash.

  • HT4623 my phone main button not working after installed new version software 7.0.6

    my phone main button not working after installed new version software 7.0.6

    Arrange some liquid like petrol spirit and w 40
    two drops in to home button.
    30 times press slowly slowly and then restart your apply iphone.
    You will get ready.
    I am sure. Thanking you...

  • My Ipod touch email stopped working after installing Update

    my Ipod touch email stopped working after installing the latest firmware update from Apple what should I do?

    Hi, jewlssch. 
    Thank you for visiting Apple Support Communities.
    If the Mail application will not launch, I would recommend processing any available updates on your Mac Pro and test launching Mail.  If the issue persists, process a reinstall of Mavericks.
    Reinstall OS X
    http://support.apple.com/kb/PH10763
    Make sure to backup all of your data prior to reinstalling OS X 10.9.
    Back up your Mac
    http://support.apple.com/kb/PH11371
    Cheers,
    Jason

  • Wifi connection with 4s not working after installing new software ios6

    wifi connection with 4s not working after installing ios 6.

    Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
    Then go to Settings > General > Reset Network Settings  and try connecting again when the phone restarts.

  • Isight Stopped Working After Installing Quicktime Software Update

    This afternoon when I logged into my Macbook, it automatically detected new software update for Quicktime. As always, I let the computer download and install the software. However, this time it created a lot of problems for me. First, I couldn't connect to my network (I use Airport Express) although the signal was strong. After reset modem, router and Airport, finally I could get on network. However, then I found out my Isight stopped working. The light on the right side of the built-in camera was always on (green). My Photo Booth screen appears green all the time. I no longer can use Skype video chat. Does anyone encounter the same problem? Can anyone help me out? I use Macbook, the operating system is OX 10.4.3. Thanks.

    Welcome to Apple Discussions, Freepisces
    I have all the latest updates on my Macs, and I have no problem at all.
    If you applied the latest (7.4.1) QT update, your problem may be due to the fact that the System Requirements for QuickTime 7.4.1 for Tiger include Mac OS X 10.4.9 or later, and you show that you are using Mac OS X (10.4.3). You can check which QT version you have installed using the QuickTime Player > About QuickTime Player menu command.
    If your QT version is an older one that is compatible with your Mac OS, and if you have not done so since you applied the QT update, repairing permissions may help you.
    If the problem is somehow related to your iSight rather than to your QT software, Apple's How to Troubleshoot iSight may help you identify and fix your problem.
    Unless you have a compelling reason for not doing so, you should consider updating to the latest version of Tiger (10.4.11). To find out what improvements you are missing by staying with 10.4.3, see some of the "About the Mac OS X 10.4.xx Update" documents for updates later than 10.4.3. A couple of examples are:
    • About the Mac OS X 10.4.6 Update (combo) and
    • About the Mac OS X 10.4.11 Update
    If you are interested, other "About..." documents are linked in this search list.
    Because System Requirements for the latest combo applicable to your MacBook, Mac OS X 10.4.11 Combo Update (Intel), are for Mac OS X 10.4.4 or later, you will need at least two steps to upgrade from your Mac OS X (10.4.3), so pay careful attention to the System Requirements of any updates you plan to apply.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

  • N95 Map stop working after firmware update

    I have the N95, just update the firmware with the latest (04/25/09), the map App stop working today… it work after the update… it will not load and when I try to reload the map to the phone via Map loader it sees the phone the says it can’t read the license information…
    Need help please.

    have u tried reinstalling the maps application?
    u can get the latest maps application update from http://www.nokia.com/maps
    download the application associated with ur n95 and install it using the pc suite application
    if my post helped u out, please click the Star next to it to add some KUDOS to my name

  • "Mobile Device helper has stopped working" after installing most recent

    OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
    After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
    _*Steps I have taken :*_
    I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
    *The two messages that I continue to get when I open iTunes and connect my phone:*
    1) "Mobile Device helper has stopped working"
    2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
    The most recent error message under "Problems Reports & Solutions" on my start menu read:
    Product: MobileDeviceHelper
    Problem: Stopped working
    Date: 4/7/2010 3:42 PM
    Status: Not Reported
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: AppleMobileDeviceHelper.exe
    Application Version: 16.691.14.1
    Application Timestamp: 4ba3b8fe
    Fault Module Name: CoreFoundation.dll
    Fault Module Version: 1.550.17.21
    Fault Module Timestamp: 4b8cb530
    Exception Code: c0000005
    Exception Offset: 0000db6b
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    This is the same message that I have received the last 10 times under Mobile Device Helper.
    *Please PLEASE please*, does anyone know how to resolve this problem?
    *Thank you SO MUCH for any insight.*
    -signed, UGH!!!

    Hi,
    I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
    I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
    Really frustrating and disappointing.

  • Internet explorer stopped working after installing iTunes 11.1.5

    Installed new version of iTunes 11.1.5 on pc running windows 8.1 and now internet explorer has stopped working.

    I have exactly the same problem with a new acer aspire. I successfully installed Itunes but windods 8.1 explorer stopped working. I had to deinstall itunes for IE to work.
    Thinking I have a corrupt install file I tried a second time but with exactly the same result. I shure would like to hear an answer.
    THank you

  • Existing HTTP server stops working after installing OWB10g

    Hi,
    I have upgraded an existing OWB target installation on a Win2000 server to 10G by installing the OWB SW on the server as described in the installation documentation. The target database is still v9.2.0.4. After installing OWB and restarting the server, the 9.2 HTTP server no longer starts. The error logs show that the HTTP server is trying to find some Perl libs in the new OWB home.
    From what I can see, the OWB 10g installation creates a new environment variable; PERL5LIB, pointing to various catalogues in the OWB 10g home. If I remove this from the system, the HTTP server again starts normally, but I suppose this has some negative impact on OWB?
    How can I get the Oracle database 9.2 HTTP server to work alongside OWB 10g?
    Roald

    Roald,
    OWB 10g 'inherited' this bug from Oracle database 10g Bug 3585410. OWB 10g install includes 'Oracle Perl Interpreter' from Oracle 10g which creates this ENV. OWB 10g does not need this and PERL5LIB can safely be renamed without affecting OWB 10g functionality.
    Nikolai Rochnik

Maybe you are looking for