Maps tells me I'm in England
Friday Apr 25 while traveling south between Eckert and Fredricksburg TX on 16 I asked Google Maps to locate me. Three time over about ten minutes it told me I was in England.
Where I was: http://maps.google.com/?ie=UTF8&ll=30.347695,-98.787346&spn=0.182508,0.257149&z= 12
Where maps told me I was: http://maps.google.com/?ie=UTF8&ll=51.1143,-0.703125&spn=0.132765,0.257149&z=12
Funny/strange. Anyone else seen such wide ranging results?
gbs
Most issues such as this are caused by having WiFi on and somewhere in the area you were were WiFi spots that for possible reasons were tagged at one time elsewhere. There are stories on here where a neighbor of somebody moved in and after doing so, the iPhone user picked up his neighbors WiFi which they use to live in another country. That WiFi mac address was surveyed long ago as being in that other county so anytime the iPhone user said locate me, it said that other country.
Locate me first will read all available WiFi spots around you (you don't have to be connected, but if WiFi is on, then it will find all around. It then will read MAC addresses and send that info in looking for matches. If wound, it will return last known spot of that WiFi spot as recorded by the company that made all that data.
If WiFi is off or no surveyed WiFi spot found, it will then just return the tower info.
Similar Messages
-
My business doesn't show on your map Apple!
Fix it, or give me back google map.
Tell Apple:
Launch Maps.
Tap the page curl at the bottom right.
Tap the text that says Report a Problem above the Print button, middle right.
Tap the type of problem you want to report.
Tap Next.
Choose the search result, street label, etc. that's giving you the problem.
Tap Next.
Add any comments, if asked.
Tap Send.
DO NOT use the feedback link! -
Hi Everyone,
I have this Layer 7 Policy Map which i config using ASDM under inspects
policy-map type inspect http test4
parameters
protocol-violation action drop-connection log
class _default_GoToMyPC-tunnel
drop-connection log
class maps identify the traffic and policy maps tell us what action to take.
Need to know on above config class map which matches the trafic is
class _default_GoToMyPC-tunnel
Regards
Mahesh
Message was edited by: mahesh parmarHi julio,
I tried below commands but seems it does not work
ASA1# show run class-map type inspect _default_GoToMyPC-tunnel
^
ERROR: % Invalid input detected at '^' marker.
ASA1# show run class-map type inspect ?
dns Configure a class-map of type DNS
ftp Configure a class-map of type FTP
h323 Configure a class-map of type H323
http Configure a class-map of type HTTP
im Configure a class-map of type IM
rtsp Configure a class-map of type RTSP
scansafe Configure a class-map of type SCANSAFE
sip Configure a class-map of type SIP
ASA1# show run class-map type inspect default_GoToMyPC-tunnel
^
ERROR: % Invalid input detected at '^' marker.
ASA1# show run class-map type inspect_default_GoToMyPC-tunnel
^
ERROR: % Invalid input detected at '^' marker.
ASA1#
Thanks
Mahesh -
Maps runs and displays a blank grid (including maps, find my iphone etc). Maps tells me it cannot connect to the internet, but I am. Connectivity is not an issue with any other app. I have tried a soft reset a few times and have turned airplane mode on and off to retsrat the antenna.
Its a 32g Wifi + 3G iPad 2. Its running the latest iOS
Help?!Hello jnovak0425,
Thank you for using Apple Support Communities.
I hesitate to provide you with too many articles to review. But you indicate you are having difficulties using FaceTime with multiple devices, so I have provided a general article and one each for iOS devices and one for Macs.
iOS: Using FaceTime
iOS: Troubleshooting FaceTime
FaceTime for Mac: Troubleshooting FaceTime
Regards,
Jeff D. -
RE: [iPlanet-JATO] Re: Deployment problem
Chidu,
I think that you are mired in the very common confusion of the default
behavior of the ApplicationServletBase.parsePathInfo() which will determine
the controlling/handling ViewBean via a URL design pattern. Lets take a look
at the URL
/NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage.jsp
is decomposed as follows:
/NASApp -> well, this is long story but is absolutely necessary, welcome to
iAS
/MigtoolboxSampleAppWar -> is the web application name, taken as the name of
the WAR file when there is no EAR file (this allows the Servlet/JSP
container to deferences the web application root under
<ias>/APPS/modules/MigtoolboxSampleAppWar) I think this part of the URL is
called th Context Path
/MigtoolboxSample -> is the Servlet Path, and will either directly reference
or match a Servlet Mapping
for instance
<servlet-mapping>
<servlet-name>MigtoolboxSampleServlet</servlet-name>
<url-pattern>/MigtoolboxSample/*</url-pattern>
</servlet-mapping>
tells the Servlet Container that the Servlet Path
/MigtoolboxSample
maps to the Module Servlet MigtoolboxSampleServlet
This is how EVERY request makes its way to the "front controller" pattern in
JATO. It is fundamental to JATO Applicatioan that every request pass
through the ModuleServlet.
every else on the URL past the Servlet Path is the PATH INFO. Based on this
understanding, you will see why the
ApplicationServletBase.parsePathInfo()
is so important. In parsePathInfo() the PATH INFO is compared to the design
pattern
/VIEWBEANNAME*
to determine the handling ViewBean from the first String Token in the path
info. For instance, the starting URL of the Sample Application is
/NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage
The PATH INFO is [IndexPage]
and IndexPage[ViewBean] is the handling ViewBean. Therefore, any simiarl
URL like
/NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage.jsp
/NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage.matt
/NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage.mike
/NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage.chidu
/NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage.XXX
will all result in the same handling View Bean
IndexPageViewBean
It is very important to understand that you CANNOT hit the JATO JSPs
directly. You must hit the "front controller" ModuleServlet which will
always delegate control to the handling ViewBean (a la, the "service to
workers" pattern)
You can attempt to hit the JSP directly but you need the right J2EE URL
/NASApp/MigtoolboxSampleAppWar/MigtoolboxSampleApp/MigtoolboxSample/IndexPag
e.jsp
this URL will directly hit the JSP. However, you will recieve an error
because the JATO framework quickly determines that there is no
RequestContext in the HttpRequest attributes and assumes that the "front
controller" was bypassed. Try it. You will get ERROR.
Lets go back to what you are trying to do, place Models and Viewbeans in
separate directories. I recommend that you move the Models. Models are
ONLY referenced by TYPE via the ModelManager, the compiler will ensure that
your code is correct and matches the packages, file locations, import
statements, etc. ViewBeans, on the other hand are related to the
ModuleServlet their are contained in and are loaded via type names according
to a design pattern.
if you want to separate models and Viewbean then simply move the Model and
make sure everything compiles.
you cannot move the ViewBeans
if you do want to move the JSP peers of the Viewbeans, then you can put them
anywhere in the web application doc root. When you do, update the
DEFAULT_DISPLAY_URL as Mike suggested
matt
-----Original Message-----
From: Mike Frisino [mailto:<a href="/group/SunONE-JATO/post?protectID=174176219122158198138082063148231088239026066196217193234150166091061">Michael.Frisino@S...</a>]
Sent: Thursday, July 26, 2001 10:48 PM
Subject: Re: [iPlanet-JATO] Re: Deployment problem
Chidu,
Did you have it running fine in the original default configuration, before
you started changing things around? The URL should not access the .jsp
directly. The URL should look more like this
"/NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage", without the
.jsp.
Also, please read the "Migration Tech Notes" document that is
linked to the
main doc index page. There is some information in there related
to trying to
run the sample application under iAS (see Tech Note 4 in
particular, "Note
on running the iMT "MigtoolboxSample" in iPlanet Application Server )
----- Original Message -----
From: <<a href="/group/SunONE-JATO/post?protectID=219015020150194233215218164140244063078048234051197">chidusv@y...</a>>
Sent: Thursday, July 26, 2001 7:27 PM
Subject: [iPlanet-JATO] Re: Deployment problem
Hi Mike,
I tried changing the url in all the viewbeans to reflect the new sub-
directory for the viewbeans(I have placed the jsps and viewbeans in
a sub-directory under MigtoolboxSampleApp/MigtoolboxSample). But I'm
still not able to get access to the jsps. I basically see the
message "GX Error Socket Error Code missing!!" error on the browser
thrown by iPlanet, but the log doesn't tell me anything. Does the url
which I give to access the jsp change accordingly, i.e., should I
give something other
than /NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage.jsp.
If I try to use any other url other
than /NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage.jsp, I
see the FileNotFoundException in the log.
I guess I'm still missing something.
Thanks for your help.
--Chidu.
--- In <a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166136158139046209">iPlanet-JATO@y...</a>, "Mike Frisino" <<a href="/group/SunONE-JATO/post?protectID=174176219122158198138082063148231088239026066196217130152150">Michael.Frisino@S...</a>> wrote:
Chidu.
Did you also adjust the following member in each of the ViewBeans?
public static final String DEFAULT_DISPLAY_URL=
"/jatosample/module1/Index.jsp";
Try adjusting this to be consistent with your new hierarchy.
Also, if you still have problems, send us the error message thatyou recieve
when you try to access the page. That would help.
----- Original Message -----
From: <<a href="/group/SunONE-JATO/post?protectID=219015020150194233215218164036129208">chidusv@y...</a>>
Sent: Thursday, July 26, 2001 4:48 PM
Subject: [iPlanet-JATO] Deployment problem
Hi,
We have a requirement to seperate the models and viewbeans and
keep
them in seperate directories. Is it possible to seperate the
viewbeans and models not be in the same directory?
I tried seperating the two in the MigtoolboxSampleApp application
provided by JATO. I changed the package and import statements
accordingly in the viewbeans, jsps and the models. But when I
deployed the application, I'm not able to access the Index page or
any of the jsps. Does the ApplicationServletBase always look forthe
viewbean in the same path as that of the module servlet?
Any help will be appreciated.
Thanks,
Chidu.
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>
<a href="/group/SunONE-JATO/post?protectID=210083235237078198050118178206047166215146166214017110250006230056039126077176105140127082088124241215002153">[email protected]</a>Hi Mike,
I tried changing the url in all the viewbeans to reflect the new sub-
directory for the viewbeans(I have placed the jsps and viewbeans in
a sub-directory under MigtoolboxSampleApp/MigtoolboxSample). But I'm
still not able to get access to the jsps. I basically see the
message "GX Error Socket Error Code missing!!" error on the browser
thrown by iPlanet, but the log doesn't tell me anything. Does the url
which I give to access the jsp change accordingly, i.e., should I
give something other
than /NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage.jsp.
If I try to use any other url other
than /NASApp/MigtoolboxSampleAppWar/MigtoolboxSample/IndexPage.jsp, I
see the FileNotFoundException in the log.
I guess I'm still missing something.
Thanks for your help.
--Chidu.
--- In iPlanet-JATO@y..., "Mike Frisino" <Michael.Frisino@S...> wrote:
>
Chidu.
Did you also adjust the following member in each of the ViewBeans?
public static final String DEFAULT_DISPLAY_URL=
"/jatosample/module1/Index.jsp";
Try adjusting this to be consistent with your new hierarchy.
Also, if you still have problems, send us the error message that you recieve
when you try to access the page. That would help.
----- Original Message -----
From: <chidusv@y...>
Sent: Thursday, July 26, 2001 4:48 PM
Subject: [iPlanet-JATO] Deployment problem
Hi,
We have a requirement to seperate the models and viewbeans and
keep
them in seperate directories. Is it possible to seperate the
viewbeans and models not be in the same directory?
I tried seperating the two in the MigtoolboxSampleApp application
provided by JATO. I changed the package and import statements
accordingly in the viewbeans, jsps and the models. But when I
deployed the application, I'm not able to access the Index page or
any of the jsps. Does the ApplicationServletBase always look for the
viewbean in the same path as that of the module servlet?
Any help will be appreciated.
Thanks,
Chidu.
[email protected] -
I’m working on designing an advanced photography course. This course makes use of Lightroom and Photoshop in the photographic workflow.
I’m learning and researching myself as I go along, and I feel I have reached a ceiling on what I can work out from the sources at my disposal thus far.
So I am turning here for help.
I am trying to clarify how tones and colours are affected from the actual scene through to the printed page. This might seem like overkill to some. However, there is a lot of misunderstanding and confusion, not to mention heated discussions amongst photographers about these issues. I’m experimenting with metering and colour / tone targets and my calculations are only meaningful if I understand how tones and colours are affected at every stage of the workflow.
Here’s how I understand it:
There are 4 (sort of) Colour “spaces” in Develop where a real-time dynamic preview of an image is rendered
1. The “viewing space” (ProPhotoRGB Chromaticity co-ordinates, sRGB gamma)
2. The “computational space” (ProPhotoRGB chromaticity co-ordinates, linear gamma – “MelissaRGB”)
(Martin Evening’s Lightroom 3 book published by Adobe press - Appendix B, section on color space page 628-632)
Below that, things get a little fuzzy. According to Jeff Schewe (Real World Camera RAW for CS5, page 32) there is a sort of
3. “Native Camera Space” and of course there is the
4. RAW data in the file on disk.
So to generate the dynamically rendered preview, the image goes through the four “layers” as follows (from bottom to top). This is almost certainly flawed, but one has to start somewhere when trying to work things out :-)
1. The RAW file is read from disk. Colorimetric interpretation is performed using a camera profile (e.g. Adobe Standard for whatever camera it is you are using). This process puts the image data into “Native camera space” (“Plotted” onto CIE XYZ with D50 white point)
2. In “Native camera space, the scene white balance (as selected by user, guessed by Lightroom or reported by camera) as well as additional camera calibration panel matrix tweaks “informs” the colorimetric conversion into Lightroom’s “computational space” e.g. Melissa RGB. The colorimetric definition of camera RGB primaries and white is re-DEFINED. The demosaicing as well as chromatic aberration corrections are performed in “native camera space”
3. Almost all image processing calculations occur computationally in the “MelissaRGB Lightroom computational space”
4. What is displayed on the screen, however, has an sRGB tone curve applied. This represents the “viewing” space. The histogram is generated from this and the RGB colour percentage readouts are generated from this as well. In addition, some slider controls from user input are weighted back through the tone curve into the computational space below.
Could someone from Adobe kindly help me to clarify the steps? Eric are you reading this? :-)
Thanks in advanceSandy - Thanks for the link. The spreadsheets you posted on your site is quite helpful.
Jao – I think what you said goes to the heart of what I am trying to achieve here: “Photograph a grey target at the exact same exposure with the exact same lighting but with different cameras and you'll end up with different values in the raw files” Which is why I encourage photographers to experiment with their cameras in order to understand exactly how the camera will respond in the heat of a real shoot. Set up a scene; take a picture, open in Lightroom. What is clipped and why? Use a reflective spot meter. Repeat. Use a hand held incident meter. Repeat. How much can you reliably recover? Are you happy with what your meter considers the mid-point (and what you set your exposure for on the camera) or do you need to compensate? Just how much latitude do you have between what your camera histogram shows as a blown out highlight and what Lightroom shows as a blown out highlight. This relates to tone. I could go on with more examples, but by now, I am (hopefully) making more sense.
I’m merely trying to clarify that which is already public in order to form a coherent mental picture. And by mental picture I do not mean an accurate representation of the minutiae and maths involved. Think of a subway map. It represents a bird’s eye view of a transportation system in a logical fashion, yet it bears almost no resemblance to the cartographical reality of the physical topography. I really don’t care where the tunnels go, how they were dug, how they are maintained or where they twist and turn. What I AM looking for is a logical (not physical) map. This map tells me where the different lines begin and end, and where I can change from one line to the other. The most important quality of the map as a whole is that it provides context. You can tell, at a glance, how different lines interact with each other and even how it links to other entities such as bus stations or public landmarks.
As many have rightfully pointed out, I should not have to care about the maths/secret sauce/internal calculations. And I don’t. In addition, I am a very happy Lightroom user and I am very comfortable using it. I know what a user needs to know to get his picture from A to B. There is no shortage of information on how to accomplish that.
It might help if I illustrate what I am trying to do below:
Please excuse the low resolution, the maximum height allowed for upload is 600 pixels. The picture below goes on the bottom left of the "layer" picture above.
Even though there are certainly many mistakes in my diagram, this is a helpful visualisation. I derived this diagram from publicly available information. As the subway map, this is a logical (not physical) representation that provides context in a visual form. With a little help from people like Eric I am sure I can correct and expand it. The net result is an enhanced understanding of Lightroom and ACR and where it fits into the photographic process, both in terms of tone and colour.
I am not posting the entire chart here since I am not even certain that a 4 “layered” representation is an appropriate logical representation. I posted the spine of the chart with the 4 “layers” and one part that elaborates on the colorimetric interpretation between the two bottom layers. Comments and corrections are welcomed. And I am convinced that this can be accomplished without divulging anything confidential. -
Dear team,
We are persoanlizing iSupplier Portal . CM file extract tab
Our requirement is to add 2 new search conditions to existing search Criteria.
PO Need By Date and PO creation Date are the 2 new search conditons. datatype is date
Already
PO Need By Date exists so when we checked on querable in ak region It was dispalyed as search condition in page.
So for PO creation Date , we created new attribute, added that attribute to Object workbnch View and then to the Region
When i am checking querable , and checking CRM file tab I am getting the below error
Error
Message not found. Application: FND, Message Name: CHILD_NOT_FOUND.
Pls suggest. Its an urgent Req.
Regards,
RadhaWhen u go to the about this page.. and check how fields are defined for searching....
2 things are required.....
one create a field on which search is required..
secondly... create a mapping.... this mapping tells u that the field on which search is performed.. how is this mapped to the database column... .... i.e. on the search results on the page...
once the mapping between the field and the results table column is defined .. that error will go off.. -
Set the class of a paragraph style to export in HTML
How, in AppleScript, set the class of a paragraph style to export in HTML?
I try with "style export tag map", but doesn't works!
Thank'sI found a way
tell application "Adobe InDesign CS6"
tell document 1
tell paragraph style 2
--get count of style export tag map
tell style export tag map 1 -- HTML , 2 = PDF
--get export class
--get export tag
set export tag to "H1"
set export class to "blue"
end tell
end tell
end tell
end tell
and its works
but thanks for help to use the class "style export tag map" -
3G data consumption vs. 4G data consumption
I have the HTC One M8 and since I often drop to 3G and 4G is pretty weak here anyway (Phoenix,AZ), I decided to keep it on 3G only since I hear 3G eats up less battery. I have had a few different devices since LTE was introduced here and regardless, 4G was weak or very inconsistent regardless of what the coverage map tells me. So far after a couple of days it seems to be paying off but was not sure if using 3G would use more or less data. I never exceed my cap or even come close, but am just curious if there was a difference in consumption. Thanks!
Hi krisbo84 - We want your brother to always get the most out of his device! I apologize for any confusion however the device does not have a specific setting to enable 3G data only. We are unable to support any 3rd party apps that may claim to allow this function. Data will be used the same way whether on 3G or 4G, the only reason it may seem like it is more is because you can do more at a faster pace. Web page loading or video streaming is going to use the same amount of data on either network.
Thank you,
YaleK_VZW
Follow us on twitter @VZWsupport -
How do I type foreign characters by using ALT+.... method?
Hello,
How do I get foreign characters from the Character Map using the ALT+... method? For example, the Character Map tells me that to get the small letter "a" with a tilde (ã), I should type "Keystroke: Alt+0227". How do I actually type this and get this numeric code?
Any ideas? On older computers, I could access a 10-key numeric set of keys.
Thanks,
Kelly
Solved!
Go to Solution.Hi tuxedo76, and welcome to the Lenovo User Community!
You need NumLk on - useful thread here:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Alt-characters-on-Lenovo-T430-keyboard/td-p...
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer! -
Set by script the tag and/or the class of a paragraph style for HTML / EPUB export?
Is it possible to set by script the tag and/or the class of a paragraph style for HTML / EPUB export?
I found a way
tell application "Adobe InDesign CS6"
tell document 1
tell paragraph style 2
--get count of style export tag map
tell style export tag map 1 -- HTML , 2 = PDF
--get export class
--get export tag
set export tag to "H1"
set export class to "blue"
end tell
end tell
end tell
end tell
and its works
but thanks for help to use the class "style export tag map" -
Hi, I just bought my iPhone 3G and I have problems with GPS locating. iPhone can't find my current position and still shows me position somewhere in Santa Monica in USA. I'm from Europe, Slovakia which is on the other side of the world. I can't fix this. I tried to turn off 3G, reset settings and even restore he phone but nothing helped. Actually, I tried all available advices on the nat and there is still this Santa Monica. Hehe, Why Santa Monica? I don't get it.
Any ideas folks? Thanxda.master,
Go outside with the iPhone where you have as much unobstructed view of the sky as possible, preferably at least 300m from where you have been trying.
Open maps, tell it to search for your location. Do not let the iPhone autolock or go to sleep for at least 15-30 minutes.
It should eventually find your location, and future attempts to find your location.
If it jumps back to Santa Monica when you go home, it may indicate that one of the WiFi networks in your area is incorrectly mapped as being in Santa Monica.
Hope this helps,
Nathan C. -
Ejb3 app functions only when both .jsf and .jsp is present
Hi All,
I have the following problem: when I try to remove either of booking.jsp and booking.jsf (having same contents) from the directory tree of app.war (following), I get the message HTTP status 404 The requested resource (/s_ejb3_jb421_tobbfele/pages/booking.jsp) is not available.
Thank you in advance: Balazs Bamer
JBoss 4.2.1 output:
16:23:21,101 INFO [MyfacesConfig] No context init parameter 'org.apache.myfaces.PRETTY_HTML' found, using default value true
16:23:21,101 INFO [MyfacesConfig] No context init parameter 'org.apache.myfaces.ALLOW_JAVASCRIPT' found, using default value true
16:23:21,101 INFO [MyfacesConfig] No context init parameter 'org.apache.myfaces.DETECT_JAVASCRIPT' found, using default value false
16:23:21,101 INFO [MyfacesConfig] No context init parameter 'org.apache.myfaces.AUTO_SCROLL' found, using default value false
16:23:21,101 INFO [MyfacesConfig] No context init parameter 'org.apache.myfaces.ADD_RESOURCE_CLASS' found, using default value org.apache.myfaces.renderkit.html.util.DefaultAddResource
16:23:21,101 INFO [MyfacesConfig] No context init parameter 'org.apache.myfaces.ADD_RESOURCE_CLASS' found, using default value org.apache.myfaces.renderkit.html.util.DefaultAddResource
16:23:21,121 INFO [MyfacesConfig] No context init parameter 'org.apache.myfaces.CHECK_EXTENSIONS_FILTER' found, using default value true
app.war (inside s_ejb3_jb421_tobbfele.ear) contents, with only the booking.jsf:
META-INF/
META-INF/MANIFEST.MF
WEB-INF/
WEB-INF/web.xml
WEB-INF/lib/
WEB-INF/lib/com-sun-rave-designtime.jar
WEB-INF/lib/commons-beanutils.jar
WEB-INF/lib/commons-chain.jar
WEB-INF/lib/commons-codec.jar
WEB-INF/lib/commons-collections.jar
WEB-INF/lib/commons-digester.jar
WEB-INF/lib/commons-el.jar
WEB-INF/lib/commons-fileupload.jar
WEB-INF/lib/commons-lang.jar
WEB-INF/lib/commons-logging.jar
WEB-INF/lib/commons-validator.jar
WEB-INF/lib/jakarta-oro.jar
WEB-INF/lib/jsfcl-dt.jar
WEB-INF/lib/jsfcl.jar
WEB-INF/lib/jstl-api.jar
WEB-INF/lib/jstl-impl.jar
WEB-INF/lib/openide.jar
WEB-INF/lib/propertyeditors.jar
WEB-INF/lib/shale-clay.jar
WEB-INF/lib/shale-core.jar
WEB-INF/lib/shale-remoting.jar
WEB-INF/lib/shale-tiger.jar
WEB-INF/lib/shale-tiles.jar
WEB-INF/lib/shale-view-1.0.4.jar
WEB-INF/lib/tiles-core.jar
WEB-INF/lib/tomahawk-1.1.2-SNAPSHOT.jar
WEB-INF/classes/
WEB-INF/classes/com/
WEB-INF/classes/com/loxon/
WEB-INF/classes/com/loxon/shaleproba/
WEB-INF/classes/com/loxon/shaleproba/FlightServlet.class
booking_messages.properties
booking_messages_en.properties
booking_messages_es.properties
booking_messages_fr.properties
images/
pages/
theme/
index.html
pages/booking.jsf
theme/style.css
WEB-INF/faces-config.xml
index.html:
<html>
<head>
<meta http-equiv="Refresh" content="0; URL=pages/booking.jsf">
</head>
</html>faces-config.xml:
<?xml version="1.0"?>
<!DOCTYPE faces-config PUBLIC
"-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.1//EN"
"http://java.sun.com/dtd/web-facesconfig_1_1.dtd">
<faces-config>
<managed-bean>
<managed-bean-name>flightServlet</managed-bean-name>
<managed-bean-class>com.loxon.shaleproba.FlightServlet</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
</managed-bean>
</faces-config>web.xml:
<?xml version="1.0"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
version="2.4">
<description>debug web.xml</description>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
<description>
State saving method: "client" or "server" (= default)
See JSF Specification 2.5.2
</description>
</context-param>
<context-param>
<param-name>javax.faces.ALLOW_JAVASCRIPT</param-name>
<param-value>true</param-value>
<description>
This parameter tells MyFaces if javascript code should be allowed in the
</description>
</context-param>
<context-param>
<param-name>javax.faces.DETECT_JAVASCRIPT</param-name>
<param-value>false</param-value>
</context-param>
<context-param>
<param-name>javax.faces.PRETTY_HTML</param-name>
<param-value>true</param-value>
<description>
If true, rendered HTML code will be formatted, so that it is "human readable".
i.e. additional line separators and whitespace will be written, that do not
influence the HTML code.
Default: "true"
</description>
</context-param>
<context-param>
<param-name>javax.faces.AUTO_SCROLL</param-name>
<param-value>true</param-value>
<description>
If true, a javascript function will be rendered that is able to restore the
former vertical scroll on every request. Convenient feature if you have pages
with long lists and you do not want the browser page to always jump to the top
if you trigger a link or button action that stays on the same page.
Default: "false"
</description>
</context-param>
<filter>
<filter-name>extensionsFilter</filter-name>
<filter-class>org.apache.myfaces.webapp.filter.ExtensionsFilter</filter-class>
<init-param>
<param-name>maxFileSize</param-name>
<param-value>20m</param-value>
<description>Set the size limit for uploaded files.
Format: 10 - 10 bytes
10k - 10 KB
10m - 10 MB
1g - 1 GB
</description>
</init-param>
<init-param>
<param-name>uploadThresholdSize</param-name>
<param-value>100k</param-value>
<description>Set the threshold size - files
below this limit are stored in memory, files above
this limit are stored on disk.
Format: 10 - 10 bytes
10k - 10 KB
10m - 10 MB
1g - 1 GB
</description>
</init-param>
</filter>
<filter-mapping>
<filter-name>extensionsFilter</filter-name>
<servlet-name>Faces Servlet</servlet-name>
</filter-mapping>
<filter-mapping>
<filter-name>extensionsFilter</filter-name>
<url-pattern>/faces/myFacesExtensionResource/*</url-pattern>
</filter-mapping>
<filter>
<filter-name>shale</filter-name>
<filter-class>
org.apache.shale.faces.ShaleApplicationFilter
</filter-class>
</filter>
<filter-mapping>
<filter-name>shale</filter-name>
<url-pattern>/*</url-pattern>
<dispatcher>REQUEST</dispatcher>
<dispatcher>FORWARD</dispatcher>
</filter-mapping>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.jsf</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
</web-app>booking.jsf:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="http://struts.apache.org/shale/core" prefix="s" %>
<%@ taglib uri="http://myfaces.apache.org/tomahawk" prefix="t"%>
<html>
<head>
<title>Metro Systems </title>
<link href="../theme/style.css" rel="stylesheet" type="text/css">
</head>
<body>
<div id="container">
<f:loadBundle basename="booking_messages" var="booking_messages"/>
<f:view>
<h3> <h:outputText value="#{booking_messages['welcome']}"/> </h3>
<h:form onsubmit="return validateForm(this);">
<table align="center" cellpadding="5" cellspacing="5">
<tr>
<td>Email</td>
<td><h:inputText id="email" value="#{flightServlet.flight.email}">
<s:commonsValidator type="required"
arg="Email"
server="true"
client="true"/>
<s:commonsValidator type="email"
arg="#{flightServlet.flight.email}"
server="true"
client="true"/>
</h:inputText>
</td>
</tr>
<tr>
<td><h:outputText id="departure" value="#{booking_messages['date']}"/></td>
<td>
<t:inputCalendar monthYearRowClass="yearMonthHeader" weekRowClass="weekHeader"
currentDayCellClass="currentDayCell" value="#{flightServlet.flight.departure}" renderAsPopup="true"
popupTodayString="#{booking_messages['popup_today_string']}" popupWeekString="#{booking_messages['popup_week_string']}">
<s:commonsValidator type="required"
arg="Departure date"
server="true"
client="true"/>
</t:inputCalendar>
</td>
</tr>
<tr>
<td><h:outputText value="#{booking_messages['city']}"/> </td>
<td> <h:selectOneMenu value="#{flightServlet.flight.city}" required="true">
<f:selectItem itemLabel="Los Angeles" itemValue="Los Angeles"/>
<f:selectItem itemLabel="Madrid" itemValue="Madrid"/>
<f:selectItem itemLabel="Mexico City" itemValue="Mexico City"/>
<f:selectItem itemLabel="New York" itemValue="New York"/>
<f:selectItem itemLabel="Paris" itemValue="Paris"/>
</h:selectOneMenu></td>
</tr>
</table>
<h:message for="email" styleClass="errors"/>
<h:message for="departure" styleClass="errors"/>
<s:validatorScript functionName="validateForm"/>
<h:commandButton type="submit" value="#{booking_messages['reserve']}" action="#{flightServlet.reserve}"/>
<h:messages/>
</h:form>
</f:view>
</div>
</body>
</html>ear application.xml:
<application>
<display-name>JSF Shale EJB3 JBoss 4.2.1</display-name>
<module>
<web>
<web-uri>app.war</web-uri>
<context-root>/s_ejb3_jb421_tobbfele</context-root>
</web>
</module>
<module>
<ejb>app.jar</ejb>
</module>
</application>ear jboss-ap.xml:
<jboss-app>
<loader-repository>
s_ejb3_jb421_tobbfele:archive=s_ejb3_jb421_tobbfele.ear
</loader-repository>
</jboss-app><servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.jsf</url-pattern>
</servlet-mapping>tells JSF, that it will get accessed via urls which end in jsf. So it's just a logical name
e.g. index.jsf
<context-param>
<param-name>javax.faces.DEFAULT_SUFFIX</param-name>
<param-value>.jsp</param-value>
</context-param>Tells JSF that the content filename will end in .jsp
Default is jsp anyway, so this param is optional.
Edit:
http://www.exadel.com/tutorial/jsf/jsftutorial-kickstart.html
Chapter "Creating the index.jsp File" might help you with the question about processing "jsp only" pages
Edited by: dube on Oct 26, 2007 2:11 AM -
Sharing a printer Mac printer with a Vista PC
I would like some assistance with sharing my printer between an iMac and a Vista PC. My printer is directly connected to the iMac and both computers are quite happily talking to each other on the network via the router (the iMac is wirelessly connected to the router and the PC is connected via Ethernet).
I have both computers on the same WORKGROUP. I have printer sharing set on the iMac and on the PC Network settings. I have been through the 'Add a printer...' wizard on the PC but it does not bring up the network printer attached to the iMac after it's search - it just says no printers found.
I have tried doing it manually and searching for the printer but I can't find it.
I'm running Mac OS X Mountain Lion (latest updates) and Windows Vista Home Premium with Service Pack 2 and all latest updates installed.
I have had this set up working the other way round, printer connected to PC by USB and the iMac connects to it remotely with no problems. I suppose I'm just missing something obvious but any help will be gratefully received.Hi
Thanks for the info about Bonjour. I did manage to download this and eventually got it started and running. I was then able to 'see' the printer attached to the Mac. However, it will not print from Windows.
Sometimes it goes through the motions and a document ends up in the print queue - the printer then starts up and spits out a blank page. Other times it tells me there are no printers available and I have to run the print wizard again. I've tried printing from Word, from the net and from a PDF, also from Memory Map - which is the application I wish to use this for, but nothing works - in fact Memory Map tells me there are no printers available at all.
Does this only work with relatively new printers? Mine is about 4 or 5 years old - Canon IP4700.
Thanks for your help anyway.
Donna -
i m having an ipod touch 4g but it never show my current postion in maps tell me wat to do???
You do have location turned on in Settings, right?
Does it work when you are near other routers?
Have you tried resetting yur iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
The location feature uses the location of wifi routers that are in Apple's database. Not all routers are in the database.
Maybe you are looking for
-
IM "getting adobe updater quit unexpectedly" in premiere pro
How doi fix this?
-
How do I know if PS CS5 has been activated?
How can I tell if PS CS5 has activated itself? If it has can I remove the internet connection from the computor without causing problems with the software?
-
How to show now playing list on TV
Our new Sony DM Port IPod dock plays audio and video from our IPod Classic, but the "Now Playing" list does not show on the TV. Any suggestions for settings? We have tried the TV out as "on" and "off". Is there an app?
-
Please help me P M Module configuration document.
Hi friends, I am planing to learn SAP PM Module, I want know process wise flow, please help me P M Module configuration document. Regards, Murali. help.sap.com
-
Can't export a 720x480 since motion 5
Hi everyone, since I upgraded I can't export to a true 720x480. When I open my rendered file in quicktime, it gives me 640x480 (actual pixels). It's kinda weird, cause in the older version my file would give me 720x480 with the same settings. FYI I'v