Maps utility not available in C2 02

Hi,
I have recently purchased Nokia C2 02.
User guide says it should have maps icon, but there is no such icon present in Menu.
Please help me how can I use maps in my handset.
Does C2 02 supports Navigation as well???
Regards
Bhupesh

it is really sad to see that nokia has done it again
my c2-02 phone is not having any map in it
i reintalled my software version using ovi suite but no difference !!!
it's depressing that after that excuses r been made like ur country do no support (sry but buddy i m in india and i suppose that was the main reason low cost phone was made)
stop saying "http://www.youtube.com/watch?v=TqLi_t_oRZI&feature=related"
what's the damn video in that link (is she not ur represtative saying "maps espicially for I.N.D.I.A)
say something logical
please......

Similar Messages

  • Map server not available ipad

    map server not available ipad

    Same problem with iPhone 5 warranty replacement. works on wifi and 3G (turning LTE off). does not work on LTE. Not a problem with Verizon location or reception because the same problem occurs on the east coast, in the mid-west, and in Nevada.
    Maps do not load and direction requests end up in 'map server not available'.

  • Can't find my iPhone on iCloud because Google Maps is not available????

    Can't find my iPhone on iCloud because Google Maps is not available????  Really and also using the new maps on iOS ***** because every time I put the exact correct address it shows the wrong location.  Hmmmm not happy Apple, get it sorted.

    No, not at all possible.  The device has to be on and it has to be connected to the internet (wifi or cellular connection).  Tracking uses internet data, so a device that is off cannot be found remotely.

  • "map server not available" message after "rerouting" is initiated

    Two mornings in a row i've had the same problem with Maps at around 5 or 6 am EST.  I set a location at the house (where I have wifi service) and start a route to that location.  Then, once I'm driving, I deliberately go off-route.  my New Ipad screen says "rerouting" but it hangs on that and never gives me a new route. From then on, while driving, anything I do with Maps produces a message something like this "directions not available -- cannot access map server at this time"
    Once I get back in the house, however, I'm able to initiate a new route and start over.  I can think of several possibilities: (1) the rerouting process causes everything to hang up somehow, (2) the servers are actually down for maintenance or whatever, which I doubt, or (3) my ipad communicates fine with the server through wifi at home but is not able to access it properly out on the road.  I'm in Atlanta and I believe (although I'm not certain} that the upper left hand corner of ipad says "LTE".  (My Roadmate app still works fine, although I realize the two have nothing to do with each other.)  Anyone have any similar experience?

    Same problem with iPhone 5 warranty replacement. works on wifi and 3G (turning LTE off). does not work on LTE. Not a problem with Verizon location or reception because the same problem occurs on the east coast, in the mid-west, and in Nevada.
    Maps do not load and direction requests end up in 'map server not available'.

  • Why is Ovi Maps 3 not available for the E63

    Hi!
    Why is Ovi Maps 3 not available for the E63 an 410.21... for the old OS 400....
    was OVI Maps available.
    I got an license for ovi and now it is not running ;-(
    Have any one an idea... thanks

    Currently there is something very seriously broken in the latest firmwares, Maps 3.0x SIS files or Nokia Maps Updater. Until Nokia gets their problems sorted out, the only way to restore Maps 3.x after factory reset or firmware update is to use a version meant for previous generation devices, like this one (thanks to the user ovikovi).
    Help spreading the knowledge — If you find my answer useful, please mark your question as Solved by selecting Accept this solution from the Options menu. Thank you!

  • Ios6 maps: Directions not available for India locations

    Just updated to ios6 from ios 5.1 on iphone4
    Built in maps app is not able to find any route/directions for Indian locations.
    Tried a lot of permuataion, but every time it erros mentioning" Directions not availabel"
    Although for US locations it is correctly showing directions
    Let me know how to fix this

    I should have never done the Grave mistake of downloading Disastrous iOS6. The maps are not working at all. Also, they have moved YouTube Icon from new version.I am using Iphone 4S.
    If this was not enough, take a look at below link:-
    http://www.apple.com/ios/feature-availability/#maps-directions
    Do anyone of you know replacement for Apple Maps?
    Thanks
    Ankit

  • ORA-32051: mapping service not available

    Hi,
    According to the instructions in "Oracle9i Database Administrator Guide Release 2(9.2)", chapter 12, for Mapping files, there should be a file named "filemap.ora" under $ORACLE_HOME/rdbms/filemap/etc. The file nor the folders 'filemap/etc' exit.
    I've created them manually,leaving the file empty. I set the file_mapping parameter to TRUE and received the above error message while trying to execute the dbms_storage_map.map_all procedure.
    Couldn't find the FMON trace files as well ... Any ideas ?
    My OS is Linux and we are using raw devices.
    thanks, Daphna

    The most straight-forward way is to see if the SMTP server is up and listening at the host and port which you specify in the utl_smtp.open_connection call is by "telneting" to that host and port:
    telnet smtp-server.your-company.com 25...
    220 smtp-server.your-company.com ESMTP Sendmail Switch-2.1.1/Switch-2.1.0; Mon, 16 Jul 2
    001 15:48:14 -0700 (PDT)
    If telnet fails to connect to the server, it means that the SMTP server is not up or the server address is invalid.
    Rob

  • X1 Carbon - battery maintenance utility not available

    My X1 came with windows 8 installed, but the thinkpad utilities does not include the battery maintenance utility that I use to manage the battery charge levels.
    Is this intentional for win 8, or can I install it and expect it to work fine?
    Thanks,
    Sebouh
    Solved!
    Go to Solution.

    Battery maintenance is not supported in the X1 Carbon with Windows 8 (Lenovo did not release the battery maintenance for Windows 8).
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • IOS 6 Map Direction Not Working

    Hi this is Karthikeyan from India, I am using apple iphone 3GS, I have updated os from ios5 to ios6, the problem is io6 map is not working like previous version ios5... The main problems is in ios6 map Route Directions completely not working... anyone help to resolve this..??

    First, I would suggest looking at: http://support.apple.com/kb/HT5429.
    In ios 6, apple removed google maps as the default and provided their own mapping service. Maps is not available in all areas and there are ways to report problems inside the application.

  • Are older Maps applications still available somewh...

    I recently got a used e61i and would like to install Nokia Maps on it. When I go to maps.nokia.com (which I used previously) I get to Ovi maps page that only has the latest version of Ovi Maps and it is not available for e61i.
    I do understand that new versions of the application use features that are not available on old phones and I am not complaining about the unavailability of Maps 3.0 on e61i. However, I would appreciate having also the older versions available for download for the older phones, even if the support for them is limited.
    I know there are plenty of other mapping applications, but the ones I know have online maps and are not well suited for my needs.
    thanks,
    Jussi

    You say that Maps is not available for your phone. Have you actually downloaded and installed the various versions from the Nokia website to see if any of them work for your phone?
    You can download any of them, and try to install it. The phone will either let you install it or not. If it does install, it will either work or not. Either way, if you don't like it you can uninstall it.
    When I was running Maps 3.0 on my N97, it didn't work well, so I downloaded and installed the older V2.0 for another phone. It was more stable than 3.0 for my N97.
    Having said that, I downloaded and tried to install V2.0 for 2 other phones before I got one to install and run the way I wanted it to.
    I used that V2.0 for another phone until someone pointed out to me the Beta 3.03, which I've used for the past couple of months.
    Have a go - you won't break the phone.

  • My external hard drive is not recognized by Time Machine; "The backup disk is not available" according to Disk Utility

    I'm not completely tech savvy, but I'm having troubles with my external memory & time machine.  I'm a student, and thus its very important to me to be able to back up my computer.
    I wanted to back up my Time Machine the other day.  I clicked the icon at the top of the page (beside the battery icon, etc.) and the message "The backup disk is not available".  I have a 500GB Seagate passport (ie: http://www.bestbuy.com/site/Seagate---FreeAgent-GoFlex-500GB-External-USB-2.0-Po rtable-Hard-Drive---Silver/9929098.p?id=1218196478444&skuId=9929098)
    My macbook pro is version 10.7.5 Mac OS X Lion.  My external memory is only about a year old. It hasn't been dropped or anything; it permanently sits secured to my desk.
    What appears when I click "Repair Disk":
    Verify and Repair volume “Time Machine Backups”
    Checking file systemChecking Journaled HFS Plus volume.
    Detected a case-sensitive volume.
    Checking extents overflow file.
    Checking catalog file.
    Incorrect block count for file shutdown_time
    (It should be 1 instead of 0)
    Invalid node structure
    Rebuilding catalog B-tree.
    The volume Time Machine Backups could not be repaired.
    Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    After clicking "Repair Disk" this message pops up: "Disk Utility Stopped Repairing 'Time Machine Backups'  Disk utility can't repair this disk. Back up as many as your files as possible, reformat the disk, and restore your backed-up files."
    I don't want to wipe my memory on my external disk just in case the disk doesn't restore (as I do not have another disk to back up my computer on to).
    What is going on? Why is this happening out of the blue? How can I fix this?

    Sounds like it either has, or is about to die.
    If you don't need anything off the old drive, then yes, replace it immediately with something a little more reolaable. I use WD Caviar Black personally. But anything that has a known low failure rate.

  • Location is not available to mapped network drive in Windows 8 using Synology NAS

    Original Thread:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-files/location-is-not-available-to-mapped-network-drive/ca7eac5c-0e3d-494b-b488-e245978e4db9
    I have recently upgraded to Windows 8.1 standard edition. I have come across a problem when using the option for mapped network drives. Under Windows 7 I would normally map a network drive (Synology NAS) and I could access all files, copy and paste, install
    apps, and link media, all from within the mapped network drive. However, under Windows 8.1 I have come across a couple of problems.
    1. When I try to copy a file from my "Mapped Network Drive" to the C:\Drive (OS Boot Drive), I get the following error,
    "E:\ is unavailable. If the location is on this PC, make sure the device or drive is connected or the disc is inserted, and then try again. if the location is on a network, make sure you're connected to the network or internet, and then try again. If the
    location still can't be found, it might have been moved or deleted."
    However, if I copy a file from the "NETWORK/Network Location" the file copies just fine with no problems. And, If I also copy a file from a "Added Network Location" the file also copies just fine with no problems. And, if I copy a file from
    my "Mapped Network Drive" to my D:\Drive (non OS Drive), the file copies just fine with no problems.
    2. When I try to install apps from my "Mapped Network Drive" they will sometimes install and sometimes not (I am also choosing the option to run the programs as Administrator). Again if I try to install using either the "NETWORK/Network Location"
    or an "Added Network Location" the apps install just fine with no problems.
    3. When I link media (music or videos) from my "Mapped Network Drive" they will work but once I reboot they no longer work as if they have lost the file path or link of the original source location.
    4. When I use FireFox (browser) and I set my default download dir to my "Mapped Network Drive" it will work once originally set it but after I reboot, it no longer works. However, again if I set the default download dir to either the "NETWORK/Network
    Location" or an "Added Network Location" the default download dir works fine even after reboot.
    While I am able to access my network drive using any of the three options, "Mapped Network Drive", "NETWORK/Network Location", and "Added Network Location" but only "NETWORK/Network Location", and "Added Network
    Location"appear to be reliable. Tbh I would prefer to be able to use my "Mapped Network Drive" in Windows 8 as I have been able to under Windows 7.
    More info:
    I currently have UAC set to "Never Notify".
    I also have Windows 8.1 installed on three different systems and all of them give me the same exact problems. One of the systems is a completely clean install with no 3rd party apps installed.
    Just so its clear I am able to access the "Mapped Network Drive" but unfortunately this method of access appears to be unreliable in Windows 8 but in Windows 7 it works flawlessly.
    If I map a network drive from another pc running windows 7 or 8, I can access and use the mapped drive with no problems. This problem appears to be related to the Synology NAS devices and I have researched the Synology forums but only found one thread about
    the problem, here:
    http://forum.synology.com/enu/viewtopic.php?f=49&t=76687
    I have searched several forums and attempted to pick the brains of my local computer shops for any incite on this problem but I have been unable to find a solution/fix.
    Any help resolving this is greatly appreciated.

    Hi,
    Based on your description, we can temporarily disable the firewall to see whether the issue persists.
    For this issue seems related to the Synology NAS devices, in order to get professional help regarding the product, we can contact the vendor support to see whether the issue
    can be fixed.
    Best regards,
    Frank Shen

  • Mapped Drive - Location Not Available

    I have a small recurring problem that is starting to get a little bit bigger.
    My environment is:
    Server 2012 Standard, AD, File Server, Print Server. Running on Hyper-V (2008)
    Clients are Windows XP, Vista, 7, and 8.1 all professional.
    I have a number of mapped drives that all go to this same file server. If I open a Windows Explorer window on any client and leave it open, after a while (always seams random), I will eventually get an error message saying "Location Not Available"
    The contents of the directory I was looking at goes blank when this message comes up. I can click OK and immediately hit refresh on the Explorer window and the contents will come back.
    Most of the time this is annoying but I am finding a couple of applications that do not like this behavior. They crash or close connections when this happens.
    I have had a Remote Desktop connection open to this server while getting this and it does not get disconnected. I do not see anything that looks related at all in the log files of the client, the server or the Hyper-V host. I have made sure that the drivers
    on Hyper-V are up to date as well as all firmware (especially the network cards).
    I am not sure if the problem started when I upgraded my personal workstation to Windows 8 (from 7) but that is when I first started to notice this.

    Hi,
    Do you mean the issue only occurs on Windows 8 systems?
    Also whether these mapped folders are DFS shares or just normal shared folder?
    If DFS is involved, test to disable Client Side Caching to see if it is related. Please add this key in all DFS target servers.
    HKLM\System\CCS\Services\LanmanServer value=<sharename> cscflags=48
    As it is a random issue, it will be difficult to find out the root case. You can try to capture a network trace with Network Monitor when the issue occurs. Let's see if any specific information could be found. 
    Detailed steps could be found:
    http://support.microsoft.com/kb/812953
    Note: As the issue occurs randomly, the package may be large as you need to wait until the issue occurs.
    Note2: you can upload package to OneDrive however as is open to public so everyone could see that package. 
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • When I go to install OS X on the disk utility I got a prompt telling me that Mac 10.7 is not available. I am connected to the internet. What do I do in order to install OS?

    My laptop was running slow while in the regular mode, but in safe mode it would work fine. I deleted all of the content through the disk utility. Once I would go back to the recovery mode prompt and click on install os I go to the next page and get a prompt that says mac os x 10.7 is not available. There also is no picture to the left of the OS system like most people have on their recovery mode screen on the install option. Please help!
    Thanks!

    cernstes wrote:
    I was planning on buying one of those lens cleaners discs here soon and then see what happens.
    That might do.  There is the 'poor man's' alternative.  Take a fine microfiber cloth (eyeglasses cleaning cloth) and wrap it around a business card.  Insert it gently into the slot.  Some times it works.  Do not dismiss the possibility that the DVD drive is kaput.
    I did purchase this laptop from my brother a couple years ago. He told me the first operating system that was on the laptop was OS X 10.6. He gave me the disc to install,
    According to the information that I have, a Mid 2009 MBP came with Leopard (10.5).  You will have to install Leopard (if you have the original disk) or purchase from the online store a Snow Leopard (10.6.3) retail disk.
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    This disk is a requisite in order to install and run Lion (10.7) or any other newer OSX.  You have to update Snow Leopard to 10.6.8 before downloading and installing Lion.
    Ciao.

  • Just bought an Airport extreem for my windows xp. Need Airport Utility v5.5.3. When I go to apple downloads it comes back page not available, try later. Whats up. Is there another way to get this utility so I can get started?

    Just bought an Airport extreem for my windows xp. Need Airport Utility v5.5.3. When I go to apple downloads it comes back page not available, try later. Whats up. Is there another way to get this utility so I can get started?

    AirPort Utility 5.5.3 for Windows - Support - Apple works fine for me as well as a test.

Maybe you are looking for