MapViewer fails to display lines when use NavigationPanel

I am using MapViewer version 10131-B061023 (i.e. 10.1.3), and am attempting to plot state secondary roads (lines) for the state of Montana. These lines display in MapBuilder, and also display in MapViewer when the first 'zoomed in' map is displayed. That is, I can see the roads for the part of the state I am zoomed into, and when I pan around the state the roads also display, but when I use the NavigationPanel to zoom out, the roads disappear. Has anyone had this problem? Any suggestions on how to fix this would be greatly appreciated. Thanks in advance.

I failed to mention that the secondary routes were in a foi rather than a base map. When I added them to the base map and removed the foi they appeared when I zoomed out. Am I missing some basic difference between the base map and a foi?

Similar Messages

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

Unwanted lines when using effects.

Having much trouble with unwanted thin lines when using outlined text with multiple effects - outer glow & bevel and emboss. Typically the lines show through the outer glow effect in the color of the background. It is then especially noticable with the darker background I used for this layout. The lines are not visible on screen but show up in printing. I have also tried saving as PDF and then printing but no difference.
Here is a scanned portion of the layout.
Any help would be greatly appreciated!

The transparency flattener preset was set to medium resolution.
If it's transparency stitching then the flattener preset you use in the print driver would make a difference. Try High resolution or make a flattener preset that has a heavier raster balance. Here's a flattened PDF/X-1a test with low res vs. a customized high res:
The custom flattener on the left has no stitching at any zoom view

There is no way to see who is on line when using facebook with iPad 2

There is no way to see who is on line when using facebook with iPad 2 why is that?

I'm guessing you mean for FB Chat? Try the app Friendly.

I am stumped I do not understand why my roommates macbook pro when duel screened will display perfectly on my monitor while mine refuses to, but mine will display perfectly when using another monitor that is not mine. Please help me out.

One day when using my duel display the second monitor decided it wouldn't display at full resolution in the middle of doing something i was confused. I use a mini display to hdmi then hdmi to the second monitor. I thought maybe the converter or cable died. I bought another another mini display to hdmi and tried another hdmi cord and the same issue. My roommate has macbook pro as well so i decided to see if it was the monitor, when i pluged the mini display converter into his and used the external monitor it displayed perfectly not below resolution. Doing this I knew it was not the monitor or the mini display to hdmi or the hdmi cable. I took it into the genuis bar assuming now that it was my grapics card or logic board. When the genuis went to duel screen it on a cinema display it displayed perfectly. So went home tried to duel screen it again and still not displaying at full resolution. That is where I am stuck, in summary:
My screen used to display perfect resolution on a second monitor and suddenly did not.
Tested two mini display to hdmi and hdmi cords both were fine.
Tested to see if monitor was issue but displayed perfectly when i used roommates laptop.
Went to genius bar and displayed perfectly on second monitor so it can display perfect resolution on apples monitors but will not do so anymore on my monitor, even though roommates macbook pro will display perfect resolution on my monitor.
I am beyond confused.

Apparently you have tried everything except - take the monitor in question to the Apple Store along with your computer. If it works there, the mystery continues.

Single Vertical Line When Using ADF for Scan or Copy on HP Officejet Pro 8600

HP Officejet Pro 8600 Premium Printer (CN577A)
OS: MS 7 64 bit
When using the ADF for my CN577A HP Officejet Pro 8600 Premium printer, I get a single vertical line on the document that is produced. This occurs when copying or scanning, both in black and white, and in color. If I scan or copy using the glass, I don't get the vertical line.
I already tried the troubleshooting. I unplugged the printer, left it without power for several minutes; that didn't correct the problem. Next, I cleaned the rollers and the glass; I still get the vertical line, but only when using the ADF.
My firmware version used is current (CLP1CN1150CR).
What should I check next?
This question was solved.
View Solution.

The ADF uses its own glass area on the scanner bed, it is the narrow (about 1" wide) strip on the left. Cleaning this area should resolve the issue. A single small spot would cause the issue you are seeing.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Photomerge produces white lines when using RAW (PEF) but not TIFF

I just started using PS CC (Mac, v14.1.2) and tried out Photomerge with a set of 40 (4 rows, 10 cols) raw images (Pentax PEF format), resulting in a 0.3 gigapixel image.
When I have them stitched by Photomerge, I see fine white lines at the merge points.
I had enabled all 3 options (blend images together, vignette removal, geometric distortion correction), using cylindrical layout.
When I first convert the PEFs to TIFFs and use Photomerge with the same options, there are no such white lines.
An example of the bad output:
These unwanted lines are, of course, at the edges where the images are getting joined.
Also, when using only a few images (2x2 or 3x3, or even 4x5), I do not get this effect.
I noticed that when using less images, the blend masks' edges are not straight - but they are when I see this issue. This suggests that at some point the merge operation gets overwhelmed and switches to a simpler algorithm, which in turn has this "bug" with RAW images, apparently.
Is this a known issue, and is there a way to get this working right with this many RAW/PEF images?

tempelorg wrote:
csuebele, that link only directs me to http://feedback.photoshop.com/photoshop_family, which is clearly not a bug report form but yet another "open" discussion forum, it seems.
Sigh. How can Adobe charge so much money for their products and not even afford a team of people to look into bugs that users might want to report. Big companies suck.
Although you were probably looking for a standard developer-type bug report form, you still might want to take a closer look at that site. You'll see numbers next to the topics; those are user votes to help get something fixed sooner. While it's one thing to submit a bug report (and from this thread it seems they might already have it), Adobe uses that site to help prioritize which bugs to fix first, based on the user discussion and votes. Because Adobe has to decide not only whether a bug needs to be fixed sooner than other bugs, but sooner or later than certain feature requests. The user discussions and user votes on that site help them decide, although I'm sure there are other internal considerations.
In addition to votes, you'll see that posts on that site can be marked "Acknowledged" or "In Progress" by Adobe. The user votes and status reports are what make that site a little more quantifiable than this forum. Also, it isn't unusual to see Adobe developers and employees in the threads looking for more info or explaining things. So while it might not look like a traditional bug database, it's along those lines but in a way that makes it a little easier for non-technical users to participate in the process.

How to hide the extra line when use the AI pen tool

When I use AI CC pen tool to draw a line, when i click the 1st anchor point, " - " shows next to the Poniter ( I did not drag ) ,I tried to move, but an extra line coming out before I click another point. So I could not draw lines or curves! That extra line just follow the Pointer direction. I am using Window 32 bit, will it affect this? please help.

suetsuetwong,
Apologizing for my being so slow in the uptake, I believe I have finally grasped the meaning.
As I now (mis)understand it, you are seeing the (maybe overly) helpful Smart Guides in action.
You may ignore the line or untick Smart Guides in the View dropdown, or change their settings as desired.
The Smart Guides are trying to help you with snapping to directions, paths, Anchor Points, whatever, and also telling you where you are.

HTML signatures distorted inside the Signatures and Stationery window preview/edit field, but display fine when used

I created an HTML signature and imported it into Outlook 2010/2013 by placing the .htm file into my %APPDATA%\Microsoft\Signatures folder. The signature looks and works great, however the signature looks distorted / severely squished in width when attempting
to view the signature in the Signatures and Stationery window within Outlook. What would be causing this? Is this a common issue when using .htm signatures?
It isn't too big of an issue as the signatures do work as expected when in normal use, however some users would like to tweak theirs using Outlook's built in editor and are not currently able to.

In my experience at least, that's a normal behaviour. The editor isn't fully WYSIWYG so if you do anything complicated in there it won't always give an accurate representation of what will eventually be output when you insert it into a message. I've seen
the same thing with signatures copied from elsewhere, displaying fine in the email but not in the editor, so it's not restricted to imported .htm files.

Display "?" when using the sqlplus

hi
I met a strange problem when using the sqlplus . It is as follows :
[oracle@LinuxOracle oradata]$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Mon Sep 10 10:21:27 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba;
I chose the default character set as installing the oracle10gR2 on the Rhel4U4 .
anybody who can help me to solve this problem ,many thanks
carl

addtional imformation
I used 'dbca' to create a database and chose the default character set .
the language I want to display is simple chinese.
who can help me ?
carl

Vertical lines when using camera

Hi all,
I'm having problems with when using my camera, I'm having vertical coloured lines / stripes.
Do I need to replace my camera or can it be solved otherwise?
Regards

I think you'll have to replace the camera. I had a vertical yellow band on the left of my camera in low light, and they swapped the camera out at the Genius bar in about 15 minutes.

Jagged lines when using Stroke Width Tool

Hello,
So I upgraded to CS6 and since then the stroke width tool does not seem to behave properly.
I sometimes, not all the times, get jagged lines when I try to adjust the stroke width.
Any idea what's causing this?

Looks like its duplicating profile points, but that may be entirely a precision error with your mouse clicks....
Mylenium

Dynamic Image Displays Blank When Using In Visual Studio Project

I am trying to simply display a dynamic image in a report. I am using Crystal Reports XI Release 2.
I have two different environments: Local via Progress where reports are called using Crystal Viewer ActiveX, and over the web where reports are called from Open Laszlo and Visual Studio project.
The image is set to a blank image as default, and Graphic Location Forumla loads the image from the database (site.logo_location + site.logo_filename) which results in an image http:
www.vetinfo3.com\a.jpg.
When I run the reports locally using the ActiveX control, it works just fine and displays the image.
When I run over the web using OpenLaszlo, it displays a blank.
Troubleshooting
We are using Visual Studio 2005, which is bundled with an older version of Crystal that doesn't support dynamic images.
To address this, I loaded Crystal XI Release 2, which updated the version in Visual Studio and enabled the Graphic Location formula field on the dev machine.
I verified the Graphic Location field was set correctly.
This caused a Version error, so we loaded cr_net_2005_mm_mlb_x86.zip on server and specified the Version in web.Config.
No errors now, but when I build and publish the code, the image still displays as blank.
            From Fiddler
               GET http://www.vetinfo3.com/mdsol1/CrystalImageHandler.aspx?dynamicimage=cr_tmp_image_c5d6a923-293b-4f1e-8739-4e698f83b087.png
               Creates C:\Documents and Settings\Curtis\Local Settings\Temporary Internet Files\Content.IE5\PWRUX2XW\CrystalImageHandler[1].png
               Blank Image
According to issues within Visual Studio, they say the fix to this is to add the <httpHandler> in web.Config, but it is already there; added when we add the viewer to the project:
In web.Config I have some questions about this line:
    <httpHandlers>
      <add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=11.5.3700.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
    </httpHandlers>
There are more service packs for Crystal XI Release 2:
crXIr2sp2_net_server_install.zip
crXIr2sp3_net_server_install.zip
crXIr2sp4_net_server_install.zip
I have not loaded these yet, but the readme files do not indicate they fix any dynamic image issues.
I am out of ideas on this; does anyone have any ideas?

What about if you take OpenLaszlo out of the picture? E.g.; use one of our samples from here;
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
I'd recommend vbnet_web_simplepreviewreport
Also, see [this|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0437ea8-97d2-2b10-2795-c202a76a5e80] article.
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Firefox Does Not Display Topics When Using "#" in the URL

I'm currently having a problem with Firefox not opening
context-sensitive help links using URLs, rather than map IDs. For
example, if the URL is
http://www.myhelp.com/index.htm#custom_topic.htm,
Firefox will load the page as expected (except it appears to
continue loading the page, which is another issue that is discussed
in another forum), but either immediately loads the parent topic
(if the requested topic is a subtopic in a book) or displays a
"Page Cannot Be Displayed" error. It's peculiar in that the correct
topic loads (the one after the octothorpe), but Firefox (or
WebHelp--I'm not sure who's to blame here) then goes to the parent
topic or displays the error. Any guesses?

I agree with Peter's obervation about test projects.
Let me suggest some patches. They may cure the
load-topic/reload-default-topic misbehavior.
In the output file whtbar.js look for this line:
else
if(sType=="hide2"&&(!gbNav4)&&(!gbOpera))
It occurs only once. Change it to
else if(sType=="hide2"&&(!gbOpera))
In the same output file, near the end, look for
function tryReload()
if (gnRE==1)
document.location.reload();
gnRE--;
Make it read
function tryReload()
if (gnRE==1)
// document.location.reload();
gnRE--;
About those JavaScript references you were deleting, you need
to keep them because they have browser-sniffing and filtering code.
Also:
In the output file myproject.htm look for these lines near
the beginning:
<meta name="description" content="WebHelp 5.50">
</head>
Delete </head> here because it belongs elsewhere.
In the same output file myproject.htm look for these lines
near the end:
</script>
<frameset cols="100%,*" frameborder=no border=0>
Make them read
</script>
</head>
<frameset cols="100%,*" frameborder=no border=0>
At the very end before </html>, insert
<body></body>:
<body></body>
</html>
Why, you may ask, would Firefox be affected by code that
filters for Nav4?
I don't completely get it, but it seems Firefox also
identifies itself as a Mozilla browser, and the ancient code in
whver.js appears to equate Mozilla with Nav4. Once this flag is
set, it is not turned off. In fact browser ID flags accumulate. So
Firefox may be burdened with RH browser ID flags for Mozilla, Nav4
and maybe Nav5, Nav 6, Nav61 and Nav7.
Just try to find your way through all the RH code filters
with those flags.
If you're really adventuresome, go into whver.js and add flag
definitions for gbFirefox (I think gb stood for generic browser,
i.e., not IE) and insert it into all the "if" conditions where you
think it should be treated the same as, or differently from, the
other browsers.
Disclaimers and warnings:
All of the above applies to RH 5 code. I haven't had time to
look in RH6. Adobe may have fixed some, not others.
Because these are output files, RH probably will overwrite
them when you publish a revised version, so you must check the new
published output.
As always:
It works for me but may not work for you; back up everything,
test and retest, etc., etc. My driver's license is good in my chair
but may not be valid elsewhere.
Good luck.
Harvey

Last Paragraph line when using full justification stretches too much

One thing that really bothers me is the way that the last line of a paragraph will stretch out over the whole width of a page when you are using full justification, even when the line is only one or two words. This is simply unacceptable from an esthetic point of view. Does Pages 2 fix this annoying behavior—which really makes full justification practically unusable—or is that still broke?

Hullo jzents:
I've run into this too, although only when pagination
occurs: i.e., you go to the next page. Haven't struck
it otherwise, and frankly had barely noticed it until
I changed to Pages 2. However it's still there. I
haven't struck it enough yet to find a workaround -
although you might try inserting your cursor in front
of a paragraph or line break - or checking invisibles
to see if you can spot what's going on when it
happens. Trouble is, before I get to that, the
problem's usually gone. To cheer you up a bit though,
it's a failing of other programs too, and I often
notice it in my local newspaper where it doesn't get
cleaned up at all!
But seriously, it's a bug and needs a fix. Be sure to
report it to Apple.
And if anyone's got a surefire trick for dealing with
it in the meantime, I'll be trying their answer too.
On the other hand, if it were something you could
live with through a method to avoid it - then why
isn't it in the help screens?
Cheers.
You told me what I did not want to know, which is that it is not fixed in Pages 2. It does not happen in some other WP that I have used, so it is very disapointing that Pages fails in this regard. Cheers!

MapViewer fails to display lines when use NavigationPanel

Similar Messages

Maybe you are looking for