Mapviewer map_request limitations for when using wms and jdbc themes?

Are there limitations to not use either the bounding_themes or the center option when a basemap requests both a jdbc and a wms theme? I would like to have the bounding_theme be the jdbc theme. I can see how this could pose challenges in that there would be a need to retrieve the jdbc theme and calc the mbr before issuing the wms requests w/ the correct bbox. Would be a nice feature though.

woops, sorry LJ -- it works. Do you have suggestions though for dealing w/ case where the jdbc theme returns one point? id like to use something like the border_margin to pad the point out to a box, but seems to always just return just the point. mkaes sense since multiplying 0 by anything is zero. we are planning on writing a servlet that instead uses sdo_buffer then construct the coordinates tag w/ the sdo_aggr_mbr. that should accommodate 1..n points returned.
<bounding_themes border_margin="0.05">

Similar Messages

Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would th yellow -sign. As you gather I am new to this program having only used Final Cut Express 4

Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would the yellow -sign. I am new to this program having only used Final Cut Express 4 previously.
iMac (early 2009) 24in 2.93GHz 4GB 1066MHz DDR3 SDRAM (To be upgraded ot 8GB in the nextfew days) os x 10.7.2 Lion
Re: Why don't my arrows on the time line operate and allow me to move to the start and end of the timeline. Iam using the trial version

Check System Preferences. I think Control-1 is used by something in the OS now. Switch it off. It's a major p[ain the way the OS is taking over more and more of the keyboard, allowing less options for application use.

I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

Purchase and use Paragon Camp Tune

How do I close a JInternalFrame when using subclasses and a separate cla...

The heading should be: How do I close a JInternalFrame when using subclasses and a separate class for the actionListener?
I have just created a JInternalFrame appclication and now I want to structure up my code. I have a Superclass that contains the usual settings for the two JInternalFrame:s, and the two subclasses with frame specific information. Both the JInternalFrames use the same OK button. I want to have the actionListener outside the classes to avoid repetition of code. But the dispose()-function does not work properly, it does not close the opened JInternalFrame. What�s wrong?
class Superclass extends JFrame
     JButton b= new JButton("ok");
     Superclass()
class Subclass1 extends Superclass
     Subclass1 ()
          add(ok);
       ok.addActionListener(new Listener());
class Subclass2 extends Superclass
     Subclass2 ()
          add(ok);
       ok.addActionListener(new Listener());
class Listener extends Superclass implements ActionListener
     public void actionPerformed(ActionEvent e)
               dispose();
}How do I controll in the Listener class that the button in Subclass1 is beeing pressed?

First of all I think I misunderstood your question. You said you had two internal frames, so I thought you wanted to close the internal frame.
It now looks to me like you want to close the entire JFrame, which makes the code even a little easier. Something like:
JComponent component = (JComponent)event.getSource();
JFrame frame = (JFrame)SwingUtilities.windowForComponent( component );
frame.dispose();
Ok, I will make a try:
public static Container getAncestorOfClass(Class c, Component comp)
w.getAncestorOfClass(w, this); Fiirst you need to learn the basics of reading the API.
"getAncestorOfClass()" is a static method. That means you don't use a variable to invoke the method. You use the class itself.
"w" is a variable, which is a JFrame, but that is not what the first parameter should be. The first parameter is a "Class".
"this" will refer to your Listener class, but you need the Component that generated the ActionEvent.
When I thought you wanted to close an internal frame then the code would have been something like:
JComponent component = (JComponent)event.getSource();
Container container = SwingUtilities.getAncesterOfClass( JInternalFrame.class, component );
JInternalFrame internalFrame = (JInternalFrame)container;
internalFrame.invokeSomeMethodHere();If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)", that demonstrates the incorrect behaviour.
http://homepage1.nifty.com/algafield/sscce.html

Please help me with my electrical engineering homework : temperature control and watering system for greenhouse using labview and arduino

temperature control and watering system for greenhouse using labview and arduino
spesification :
1. max temp : 28 celcius (when temperature is more than 28 celcius, fan ON)
2. min temp : 20 celcius (when temperature is under 20 celcius, heater ON)
3. watering system : aquaponic (grow plant and fish in separate tank but connect each other). Plant roots help filter water for fish. Fish poop for plants fertilizer. So I need a pump to distribute water.
Please help me create VI file simulation.. I'm sorry I'm not fluent in English. May God bless you all
Attachments:
YOOOSHH.vi ‏88 KB

Duplicate thread. Please keep the discussion in that thread where you already have a response. It is also the more appropriate thread for your question.
Lynn

My photos are sharp but become soft when used in and IDVD slide show.

My photos are sharp but become soft when used in and IDVD slide show. How can I prevent this from happining??

Hi,
I suggest that you try unchecking both of the crop options - landscape & portrait.
To re-create your situation, I had to check the crop for landscape pictures option.
I prefer to have control over any cropping so I tend to crop each image first before creating the slide show.
Brian

Dreamweaver CC generates one of 3 error messages when using find and replace on Win 8.1 64 bit.

Dreamweaver CC generates one of 3 error messages when using find and replace is used more than twice in succession. "While executing onLoad in bc_afterSave.htm, the following JavaScript error(s) occurred: At line 188 of file C:\Program Files (x86)\Adobe|Adobe DreamweaverCC|Configuration|Shared|BC\JS\bc_sites.js": out of memory"
or
While executing runCommand in File_Save.htm, a JavaScript erroroccurred.
or
While exciting getDynamicContent inAdressURL.htm, a Javascript erroroccirred.
Any thoughts - I end up closing DWCC and reopening. Will work for two additional Find and Replace before the error messaged\s popup again.

bkaufman43 wrote:
Thanks Jon. I tried all of those solutions before posting. Same problem. It seems that the problem is tied to DWCC. Do not have the problem when using DW6 on Win8.1. When running DWCC on a Win7 pc, we get the same error message. When running DW6 on Win 7, f&c works fine. It seems to be a bug in DWCC. DWCC works flawlessly on our Macs.
The same steps apply to DWCC, you just need to choose the CC folders rather than the DWCS4-6 versions that the page talks about. The layout of CC's folders hasn't changed from the older versions which is why, I think, Adobe hasn't updated the troubleshooting page as of yet.
As Nancy mentions, a 38,500 page site is sort of ridiculously large for a static website, that could be part of the problem, but your response quoted above leads me to think you may have tried the troubleshooting steps in the wrong version of the program. Could you confirm that?

TS3742 I have an iMac 24" system. I just recently installed MAC OS X 10.7.4 (Lion) on my system. Since doing so, my system consistently hangs. Particularly when using iMovie and iPhoto.

I have an iMac 24" system. I just recently installed MAC OS X 10.7.4 (Lion) on my system. Since doing so, my system consistently hangs. Particularly when using iMovie and iPhoto. I have to power off my system to get it running again. Any suggestions on what I can do to address this situation.

I would first reset the SMC:
Shut down and unplug the Mac.
Keep the Mac unplugged for at least fifteen seconds.
Plug the Mac back in and do not turn it back on for at least five seconds.
Press the power button to turn the Mac back on.
Then I would reset the PRAM by rebooting the iMac while simultaneously holding the Command-Option-P-R keys until the machine restarts a second time.
Let us know if these procedures don't solve the problems.
Hope this helps

Building executables when using LV and MATRIXx

Hi!
With respect to Building executables when using LV and MATRIXx, I need clarification on following:
1) Pre-requisites to use MATRIXx? We have LV 7.1 FDS with application builder.
2) Licensing scheme? We would like to have MATRIX on 3 development stations.
3) Can we build stand alone executables when using MATRIXx with LV?
4) Do we need to purchase any addon to achieve (3) ?
Thanks,
Gurdas
Gurdas Singh
PhD. Candidate | Civil Engineering | NCSU.edu

Hello Gurdas,
Before I answer your questions, I am curious to know what you have in mind for the stand alone executables you are interested in building. It may help me to know a little more detail about your plans. Depending on your application, some of these answers may or may not be applicable. In any case, here are answers to your questions:
1) There are no prerequisites for using MATRIXx. LabVIEW is not required. However, with LabVIEW FDS, you do have an Xmath Script node located in the Functions > All Functions > Analyze > Mathematics > Formula palette. This node can be used to call Xmath scripts from LabVIEW.
Note: To use the Xmath Script node successfully, you will want to install LabVIEW 7.1.1 Maintenance Release. Refer to KnowledgeBase 300A6NDT: How Can I Resolve MATLAB and Xmath Script Node Issues in LabVIEW?
2) There are two licensing options for MATRIXx: node-locked and floating (concurrent). A node-locked license is restricted to a specific node and can be installed and used on that single computer. A floating (concurrent) license allows use of the product by a specified number of concurrent users on any computer on a local area network that includes a server running a single license manager. For more information, follow the link to the MATRIXx Price List from Products and Services: MATRIXx.
3) There are two ways you might build executables when using MATRIXx and LabVIEW. One way uses a component of MATRIXx to automatically generate C code. AutoCode is a component of MATRIXx that allows the user to turn system models into C code. This C code can then be compiled into an EXE or DLL. If built into a DLL, LabVIEW can be used to call the DLL. A more thorough explanation of this is provided in Developer Zone Tutorial: Running MATRIXx SystemBuild Models in LabVIEW/LabVIEW Real-Time.
Another way that may work is to build an executable from a LabVIEW VI that uses an Xmath Script Node. Any target machine running this executable would need to have Xmath and the LabVIEW Run-Time Engine installed.
4) No other add-ons are needed for (3). Do be sure to refer to the note following the answer to (1).
Regards,
Eric M.

[svn:fx-4.x] 15119: Menu. popUpMenu textAlign should be start rather than left so it works correctly when using FTEText and direction =rtl.

Revision: 15119
Revision: 15119
Author:   [email protected]
Date:     2010-03-29 13:49:52 -0700 (Mon, 29 Mar 2010)
Log Message:
Menu.popUpMenu textAlign should be start rather than left so it works correctly when using FTEText and direction=rtl. Also made same change for AccordionHeader, CheckBox and RadioButton just to be safe.
QE notes:
Doc notes: None
Bugs: SDK-26028
Reviewed By: Kevin
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-26028
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/framework/defaults.css

Thank you so much wchp, this is brilliant. I have had this annoying problem for a long time. I eventually rang Mac support, they did not know how to fix the problem as you have suggested so they instigated many hardware replacements which eventually left my iMac severely crippled. They eventually replaced it with the latest model. But I spent two months working with a disabled computer which really interfere with my work.
Your solution appears to have solved my problem, at least so far, but I am hopeful that it is a permanent fix. I hope that your suggestions are taken up by Apple support. This may solve many users problems and avoid Apple making expensive fixes that don't actually work.
I thought that the new iMac would not have the 'Wake up from sleep by painting in the login window' problem but it did, this really annoyed me. Anyway now the problem appears to be solved, it's not I will repost and keep working on it. Thanks again.

Is 11g Enterprise version feature or time limited for personal use?

I am not sure. Idid not find an exacty statement.
Is the Enterprise (not Express !) Version 11g feature or time limited for personal use?
Peter

PavanG wrote:
You can use it for free. There are some components which need licensing such as RAC and OLAP.For personal/learning use, no licenses are required to use any of these features.

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

Photoshop CC. Colour selection not working when using alt and brush.

Hi, Photoshop CC. Windows 8.1 64 bit. Colour selection not working when using alt and brush. I have tried rebooting and other things like closing swatch panel etc.
The alt key is otherwise OK. It's not the recent upgrade from Win 8 to 8.1 (5 days ago) because the colour selection facility was working yesterday. Any ideas.

I'd say things sound desperate enough to try resetting Preferences
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop
If that fails, we need to know your operating system?
Do you have a full CC subscription, or by apps do you mean Photoshop, Bridge and Lightroom?
Another other information that might pertain ?

When using google and you do a new search it goes back to previous search only happens with fireox

when using google and you do a new search it goes back to previous search only happens with fireox

Try to connect to iTunes during the setup.

Sending e-mails when using talkmobile and talktalk...

When using Talkmobile and a TALKTALK e-mail address, I can only receive e-mails;
I cannot send e-mails!
Talkmobile blame Talktalk, and vice versa!
Has anyone any suggestions, please!

You need to contact T-T and find out their SMTP settings ( which allows the sending of emails over wifi via your ISP) This info is probably on their website
I assume you do not have a 3G iPad .In which case go to the Apple site
http://www.apple.com/support/ipad/
where you should find very clear guidance on most issues

Mapviewer map_request limitations for when using wms and jdbc themes?

Similar Messages

Maybe you are looking for