MAR Transport Configurator ERROR

Hello CRM Mobile Guru's,
I have installed the Moblie Repository Server on a windows server 2003. The .Net framework release used is the 2.0
We have installed the SAP CRM Mobile client 7.0 SP4.
When I configure the MAR Transport Configurator for CRM connection server, i have git the followong error.
"Failed! Could not establish connection to "CRD".
Details:
Could not load file or assembly 'SAP.Connector, Version=2.0.0.0; Culture=neutral, PublicKeyToken=50436dca5c7f7d23' or one of its dependencies. The system cannot find the file specified
I have one question. Is the SAP Gui mandatory to use MAR?? I think it is note a prerequisites of the Mobile Server Reporsitory.
If you have an idea? please advice.
Best regards.

Hello
interesting issue. hearing this isuse again after a long time
At First, SAPGUI is not mandatory for MRS installation.Mobile installtion deploys all the relevant binaries required to commnicate with CRM server.
As you mentioned, .Net framework 2.0 is installed in MRS machine.SAP.Connector.dll reuqires to be installed in GAC (Global Assemly Cache) and GAC (GacUtil.exe) does not come along with .Net framework 2.0 installation. No idea why Microsoft did this. since Gacutil.exe is not available in MRS machine, Mobile installation is unalble to install SAP.Connector.dll and SAP.Connecto.rfc.dll in the GAC.
There are two ways to resolve this issue and are as follows
1. Install .Net framework 2.0 SDk in MRS machine.install SAP.Connector.dll and SAP.Connecto.rfc.dll in the GAC using GACutil.exe. Here is the link for .Net framework 2.0 SDK http://www.microsoft.com/downloads/details.aspx?FamilyID=fe6f2099-b7b4-4f47-a244-c96d69c35dec&displaylang=en
2. Open GAC Folder located at <<Drive>>:\WINDOWS\assembly and manually add the assembly by dropping the files.
please note that SAP.Connector.dll and SAP.Connecto.rfc.dll are availble at %mobilerootdir%\bin.Net. After performing any of the above steps, verify the scenario as you have reported.
Best Regards
Shankar

Similar Messages

Business service EJB Transport configuration error

Hi,
When configuring Business service to work on ejb protocol, on EJB Transport Configuration tab, I get error message saying
Generate: Error during generation of the WSDL: Cannot run program "null/modules/org.apache.ant_1.7.1/bin/ant.bat": CreateProcess error=2, The system cannot find the file specified
BEA_HOME, MIDDLEWARE_HOME, ANT_HOME tried to set, not helped.
JrockIt 4.0.0.,Weblogic 10.3.3, OEPE 11.1.1.6.
What could be the problem?
Thanks in advance.

Hi,
haven't found product.properties file in directory. Here is eclipse.ini file
-startup
plugins/org.eclipse.equinox.launcher_1.1.0.v20100507.jar
--launcher.library
plugins/org.eclipse.equinox.launcher.win32.win32.x86_64_1.1.0.v20100503
-showsplash
org.eclipse.platform
--launcher.defaultAction
openFile
-vmargs
-Xms256m
-Xmx768m
-XX:MaxPermSize=512m
-Dsun.lang.ClassLoader.allowArraySyntax=true
-Dweblogic.home=D:\middleware\wlserver_10.3
-Dharvester.home=D:\middleware\oracle_osb1\harvester
-Dosb.home=D:\middleware\oracle_osb1
-Dosgi.bundlefile.limit=500
-Dosgi.nl=en_US
So only OSB and Weblogic homes are set.
I tried with/without setting additional homes (such as BEA_HOME etc.) just because this line :
Cannot run program "null/modules/org.apache.ant_1.7.1/bin/ant.bat" confused me. It's like path to middleware installation isn't set, that's why it's NULL here.
Any ideas?
Thanks in advance.
Edited by: frf on 20/8/2010 5:22

Error Destination in JMS Transport Configuration page (Proxy Services)

Hi, Can anybody provides me the sample of Error Destination in JMS Transport Configuration page (Proxy Services) .I need to know the format. I am using "jms://<host:port[,host:port]*/factoryJndiName/destJndiName>", but it does not work.
From Oracle webstie, http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/interopjms/transport.html, the detail description of Error Destination is " In this field you can configure the name of the target destination for the messages, which have reached the maximum number of retry count. "

Can you provide the JNDI name of the error destination alone there ?

Transport domain configuration error

Hi,
We have made a homogeneous system copy of our R/3 production system to create a test system.
The copy has the same SID as the source system and is installed as a local system rather than a domain - this is a Windows environment. The source system is the domain controller for the transport domain.
I have run SE06 in the copied system and am now trying to reconfigure STMS to set it up as a single system in it's own domain.
However, when I go into t/action STMS I am prompted to join the production domain - which I didn't expect, so I select Other configuration and enter appropriate values there but am getting error:-
Local TMS configuration is inconsistent in N3P
Message number XT 123
Can anybody advise how to resolve this?
Regards
Richard

1. Did you follow changing SID name and post database copy steps at database level first?
2. If you have done above, I hope you have deleted existing Transport configuration from SE06. If you haven't pls do.
3. Then, At transport domain controller, please remove this system ( if this system existed earlier)
4. Now, try joining domain.
It should work!
K

Receiver Mail Adapter configuration Error???

Hi,
i've created a Mail Adapter with the following configuration:
Adaptertype: Mail
Receiver
Transport-Protocol: SMTP
Message-Protocol: XIPAYLOAD
Adapter-Engine: Integration-Engine
I set From and To Fields to a valid address. When i start a test the message is passing the integration engine and an error occurs within the mail-adapter:
Mail: Configuration error: Channel 7a15b118b96b392bbc9be5922f55b7d0is not configured for XIMailAdapter
Mail: call failed; com.sap.aii.af.ra.ms.api.RecoverableException: Error: invalid XIMailAdapter channel 7a15b118b96b392bbc9be5922f55b7d0
How can this happen?
regards
ms

Hi,
Reffer these BLOGS
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
<u><b>Target Structure:::::</b></u>
- <xs:schema targetNamespace="http://sap.com/xi/XI/Mail/30"
xmlns:xi="http://sap.com/xi/XI/Mail/30"
xmlns:xs="http://www.w3.org/2001/XMLSchema">
- 
- <xs:element name="Mail">
- <xs:annotation>
<xs:documentation>Mail package for XI - Mail Adapter</xs:documentation>
</xs:annotation>
- <xs:complexType>
- <xs:sequence>
<xs:element name="Subject" type="xs:string" minOccurs="0" />
<xs:element name="From" type="xs:string" minOccurs="0" />
<xs:element name="To" type="xs:string" minOccurs="0" />
<xs:element name="Reply_To" type="xs:string" minOccurs="0" />
<xs:element name="Content_Type" type="xs:string" minOccurs="0" />
<xs:element name="Date" type="xs:dateTime" minOccurs="0" />
<xs:element name="Message_ID" type="xs:string" minOccurs="0" />
<xs:element name="X_Mailer" type="xs:string" minOccurs="0" />
- <xs:element name="Content" minOccurs="0">
- <xs:annotation>
<xs:documentation>any type</xs:documentation>
</xs:annotation>
</xs:element>
</xs:sequence>
<xs:attribute name="encoding" type="xs:string" />
</xs:complexType>
</xs:element>
- <xs:element name="MailReceipt">
- <xs:annotation>
<xs:documentation>Mail Receipt for XI - Mail Adaper</xs:documentation>
</xs:annotation>
- <xs:complexType>
- <xs:sequence>
<xs:element name="Server" type="xs:string" />
<xs:element name="Format" type="xs:string" />
<xs:element name="UseMailPackage" type="xs:boolean" />
<xs:element name="Encoding" type="xs:string" />
<xs:element name="Subject" type="xs:string" minOccurs="0" />
<xs:element name="From" type="xs:dateTime" minOccurs="0" />
<xs:element name="To" type="xs:string" minOccurs="0" />
<xs:element name="Date" type="xs:dateTime" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
Regards
Seshagiri

A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)

Hi guys
i have problem when i run my windows application exe in windows server 2003
it give me this exception error :
I using sql server 2005
visual studio 2008
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.SqlClient.SqlException: A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.)
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadSniError(TdsParserStateObject stateObj, UInt32 error)
at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()
at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
at System.Data.SqlClient.TdsParserStateObject.ReadByte()
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet)
at Sales.SalesClass.ShowSalesData(String ConnectionString)
at Sales.Form1.timer1_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
Sales
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Documents%20and%20Settings/administrator.ALTAWIREADYMIX.000/Desktop/Sales.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Why this error show and how to solve it
if possible help me
Why this exception show and how to solve it.
Notes this exception not close my application and not affect in result show but i don't know why it show

The problem can be caused by certain issues of long-running queries, which are reported improperly. Try increasing the timeout:
http://support.microsoft.com/en-us/kb/555938

OSB11g Workbench JCA Transport page error

Hello
In latest OSB11g (WLS 10.3) workbench comes an error in JCA Transport page as
"The JCA Transport page of this editor contains an error which must be resolved."
if JCA address is given in protocol page.
Then the page JCA Transport Configuration is empty and
row "JCA File <field> Browse" is missing.
This errorr comes if Business Service is generated automatically thru JDeveloper (11..... )
Maybe manual JCA configuration succees.
This matter relates to following type of dicussion that is resolved.
Business service NOT getting configured from jca file in Windows 7
The OS is Win 7.

OK.
There was an error in generated (Oracle Service Bus / Generate Service) ./wsdl/...wsdl file
related to file paths.
It seems that the Workbench operation "Oracle Service Bus / Generate Service" don't completely
succeed, if the location of files is more complicated.
For. ex. I have folders BusinessServices, jca, wsdl, xsd.
When I corrected the error in .wsdl file, then page "JCA transport" showed a lot of data.
Let's see what's the next problem or do I finally ( after one week Win 7 fighting ) manage
to get data from Derby database.
PS. Maybe EJBs is more simple and better solution to handle database.
With EJBs is easier to manage higher loads.

Server Configuration Error

I'm setting up 10.4.5 Server for the first time, and I've managed to get all of my services running correctly except the mail server. I've searched the discussions and tried some of the suggestions without success.
Briefly, I cannot receive mail from outside of my network. I can send mail out, I can send and receive mail within the network, the email client authenticates and checks the accounts, and I can access everything via WebMail (thanks to the suggestions here). Multiple tests from DNStuff haven't been helpful to me.
I'm adding the postconf -n results as well as a rejected email and some log entries.
powermacg4:/ erick$ postconf -n
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps =
luser_relay = postmaster
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mapsrbldomains =
messagesizelimit = 10485760
mydestination = $myhostname,localhost.$mydomain,localhost,kaisernetwork.us
mydomain = kaisernetwork.us
mydomain_fallback = localhost
myhostname = mail.kaisernetwork.us
mynetworks = 127.0.0.1/32,66.93.12.106,192.168.225.192/26,17.250.248.44
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdclientrestrictions = permit_mynetworks sbl-xbl.spamhaus.org rejectrblclient dnsbl.sorbs.net rejectrblclient sbl-xbl.spamhaus.org permit
smtpdpw_server_securityoptions = cram-md5,login
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_certfile = /etc/certificates/Server.crt
smtpdtls_keyfile = /etc/certificates/Server.key
smtpduse_pwserver = yes
smtpdusetls = yes
unknownlocal_recipient_rejectcode = 550
Return-path:
Received: from mac.com (smtpin09-en2 [10.13.10.79])
by ms22.mac.com (iPlanet Messaging Server 5.2 HotFix 2.08 (built Sep 22 2005))
with ESMTP id <[email protected]> for [email protected]; Sun,
26 Mar 2006 14:05:40 -0800 (PST)
Received: from smtpout.mac.com (smtpout05-en1.mac.com [17.250.248.87])
by mac.com (Xserve/smtpin09/MantshX 4.0) with ESMTP id k2QM5cEd014984 for
<[email protected]>; Sun, 26 Mar 2006 14:05:40 -0800 (PST)
Received: from localhost (localhost)
by smtpout.mac.com (Xserve/8.12.11/smtpout05/MantshX 4.0)
id k2QM40Ya000383; Sun, 26 Mar 2006 14:05:40 -0800 (PST)
Date: Sun, 26 Mar 2006 14:05:40 -0800 (PST)
From: Mail Delivery Subsystem <[email protected]>
Subject: Warning: could not send message for past 4 hours
To: [email protected]
Message-id: <[email protected]>
Auto-submitted: auto-generated (warning-timeout)
MIME-version: 1.0
Content-type: multipart/report;
boundary="k2QM40Ya000383.1143410740/smtpout.mac.com";
report-type=delivery-status
Original-recipient: rfc822;[email protected]
This is a MIME-encapsulated message
--k2QM40Ya000383.1143410740/smtpout.mac.com
** THIS IS A WARNING MESSAGE ONLY **
** YOU DO NOT NEED TO RESEND YOUR MESSAGE **
The original message was received at Sun, 26 Mar 2006 09:34:26 -0800 (PST)
from smtpin03-en2 [10.13.10.148]
----- Transcript of session follows -----
... while talking to mail.kaisernetwork.us.:
DATA
<<< 451 Server configuration error
<[email protected]>... Deferred: 451 Server configuration error
<<< 554 Error: no valid recipients
Warning: message still undelivered after 4 hours
Will keep trying until message is 4 days old
--k2QM40Ya000383.1143410740/smtpout.mac.com
Content-Type: message/delivery-status
Reporting-MTA: dns; smtpout.mac.com
Arrival-Date: Sun, 26 Mar 2006 09:34:26 -0800 (PST)
Final-Recipient: RFC822; [email protected]
Action: delayed
Status: 4.3.0
Remote-MTA: DNS; mail.kaisernetwork.us
Diagnostic-Code: SMTP; 451 Server configuration error
Last-Attempt-Date: Sun, 26 Mar 2006 14:05:40 -0800 (PST)
--k2QM40Ya000383.1143410740/smtpout.mac.com
Content-Type: message/rfc822
Return-Path: <[email protected]>
Received: from mac.com (smtpin03-en2 [10.13.10.148])
by smtpout.mac.com (Xserve/8.12.11/smtpout05/MantshX 4.0) with ESMTP id k2QHYQq5016724
for <[email protected]>; Sun, 26 Mar 2006 09:34:26 -0800 (PST)
Received: from [192.168.225.195] (dsl093-012-143.cle1.dsl.speakeasy.net [66.93.12.143])
(authenticated bits=0)
by mac.com (Xserve/smtpin03/MantshX 4.0) with ESMTP id k2QHYM4o005075
(version=TLSv1/SSLv3 cipher=DES-CBC3-SHA bits=168 verify=NO)
for <[email protected]>; Sun, 26 Mar 2006 09:34:25 -0800 (PST)
User-Agent: Microsoft-Entourage/11.2.3.060209
Date: Sun, 26 Mar 2006 12:34:22 -0500
Subject: Test
From: Eric Kaiser <[email protected]>
To: <[email protected]>
Message-ID: <C04C3ACE.746D%[email protected]>
Thread-Topic: Test
Thread-Index: AcZQ+4Szwz53xLzuEdqN/QAKlbRzag==
Mime-version: 1.0
Content-type: multipart/alternative;
boundary="B32262212662452496"
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--B32262212662452496
Content-type: text/plain;
charset="US-ASCII"
Content-transfer-encoding: 7bit
Test
--k2QM40Ya000383.1143410740/smtpout.mac.com--
Mar 26 18:36:12 powermacg4 postfix/smtpd[9633]: NOQUEUE: reject: RCPT from test.dnsstuff.com[66.36.241.109]: 451 Server configuration error; from= to=<postmaster@[66.93.12.106]> proto=SMTP helo=<test.DNSreport.com>
Mar 26 18:36:12 powermacg4 postfix/smtpd[9633]: warning: unknown smtpd restriction: "sbl-xbl.spamhaus.org"
Mar 26 18:36:12 powermacg4 postfix/smtpd[9633]: NOQUEUE: reject: RCPT from test.dnsstuff.com[66.36.241.109]: 451 Server configuration error; from= to=<[email protected]m> proto=SMTP helo=<test.DNSreport.com>
Mar 26 18:36:12 powermacg4 postfix/cleanup[9635]: B8AD84507A: message-id=<[email protected]>
Mar 26 18:36:12 powermacg4 postfix/smtpd[9633]: disconnect from test.dnsstuff.com[66.36.241.109]
Mar 26 18:36:12 powermacg4 postfix/qmgr[8260]: B8AD84507A: from=<[email protected]>, size=982, nrcpt=1 (queue active)
Mar 26 18:36:12 powermacg4 postfix/local[9636]: B8AD84507A: to=<[email protected]>, orig_to=<postmaster>, relay=local, delay=0, status=sent (delivered to file: /dev/null)
Mar 26 18:36:12 powermacg4 postfix/qmgr[8260]: B8AD84507A: removed
Mar 26 18:44:50 powermacg4 postfix/smtpd[9746]: connect from smtpout.mac.com[17.250.248.97]
Mar 26 18:44:50 powermacg4 postfix/smtpd[9746]: warning: unknown smtpd restriction: "sbl-xbl.spamhaus.org"
Mar 26 18:44:50 powermacg4 postfix/smtpd[9746]: NOQUEUE: reject: RCPT from smtpout.mac.com[17.250.248.97]: 451 Server configuration error; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<smtpout.mac.com>
Mar 26 18:45:08 powermacg4 postfix/cleanup[9751]: 0ADFF45096: message-id=<[email protected]>
Mar 26 18:45:08 powermacg4 postfix/smtpd[9746]: disconnect from smtpout.mac.com[17.250.248.97]
Mar 26 18:45:08 powermacg4 postfix/qmgr[8260]: 0ADFF45096: from=<[email protected]>, size=935, nrcpt=1 (queue active)
Mar 26 18:45:08 powermacg4 postfix/local[9752]: 0ADFF45096: to=<[email protected]>, orig_to=<postmaster>, relay=local, delay=0, status=sent (delivered to file: /dev/null)
Mar 26 18:45:08 powermacg4 postfix/qmgr[8260]: 0ADFF45096: removed
Mar 26 18:50:44 powermacg4 postfix/smtpd[9828]: connect from mail2.sea5.speakeasy.net[69.17.117.4]
Mar 26 18:50:45 powermacg4 postfix/smtpd[9828]: warning: unknown smtpd restriction: "sbl-xbl.spamhaus.org"
Mar 26 18:50:45 powermacg4 postfix/smtpd[9828]: NOQUEUE: reject: RCPT from mail2.sea5.speakeasy.net[69.17.117.4]: 451 Server configuration error; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<mail2.sea5.speakeasy.net>
Mar 26 18:50:45 powermacg4 postfix/cleanup[9830]: 32EC9450A8: message-id=<[email protected]>
Mar 26 18:50:45 powermacg4 postfix/smtpd[9828]: disconnect from mail2.sea5.speakeasy.net[69.17.117.4]
Mar 26 18:50:45 powermacg4 postfix/qmgr[8260]: 32EC9450A8: from=<[email protected]>, size=1127, nrcpt=1 (queue active)
Mar 26 18:50:45 powermacg4 postfix/local[9831]: 32EC9450A8: to=<[email protected]>, orig_to=<postmaster>, relay=local, delay=0, status=sent (delivered to file: /dev/null)
Mar 26 18:50:45 powermacg4 postfix/qmgr[8260]: 32EC9450A8: removed
Mar 26 19:01:40 powermacg4 postfix/postfix-script: refreshing the Postfix mail system
Mar 26 19:01:40 powermacg4 postfix/master[8258]: reload configuration
Mar 26 19:02:01 powermacg4 postfix/smtpd[9970]: connect from test.dnsstuff.com[66.36.241.109]
Mar 26 19:02:02 powermacg4 postfix/smtpd[9970]: warning: unknown smtpd restriction: "sbl-xbl.spamhaus.org"
Mar 26 19:02:02 powermacg4 postfix/smtpd[9970]: NOQUEUE: reject: RCPT from test.dnsstuff.com[66.36.241.109]: 451 Server configuration error; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<test.DNSreport.com>
Mar 26 19:02:02 powermacg4 postfix/smtpd[9970]: lost connection after RCPT from test.dnsstuff.com[66.36.241.109]
Mar 26 19:02:02 powermacg4 postfix/cleanup[9972]: 4E106450DE: message-id=<[email protected]>
Mar 26 19:02:02 powermacg4 postfix/smtpd[9970]: disconnect from test.dnsstuff.com[66.36.241.109]
Mar 26 19:02:02 powermacg4 postfix/qmgr[9956]: 4E106450DE: from=<[email protected]>, size=741, nrcpt=1 (queue active)
Mar 26 19:02:02 powermacg4 postfix/local[9973]: 4E106450DE: to=<[email protected]>, orig_to=<postmaster>, relay=local, delay=0, status=sent (delivered to file: /dev/null)
Mar 26 19:02:02 powermacg4 postfix/qmgr[9956]: 4E106450DE: removed
Mar 26 19:04:48 powermacg4 postfix/smtpd[10003]: connect from smtpout.mac.com[17.250.248.97]
Mar 26 19:04:48 powermacg4 postfix/smtpd[10003]: warning: unknown smtpd restriction: "sbl-xbl.spamhaus.org"
Mar 26 19:04:48 powermacg4 postfix/smtpd[10003]: NOQUEUE: reject: RCPT from smtpout.mac.com[17.250.248.97]: 451 Server configuration error; from=<[email protected]> to=<[email protected]> proto=ESMTP helo=<smtpout.mac.com>
Mar 26 19:04:54 powermacg4 postfix/cleanup[10007]: 1868B450E6: message-id=<[email protected]>
Mar 26 19:04:54 powermacg4 postfix/smtpd[10003]: disconnect from smtpout.mac.com[17.250.248.97]
Mar 26 19:04:54 powermacg4 postfix/qmgr[9956]: 1868B450E6: from=<[email protected]>, size=935, nrcpt=1 (queue active)
Mar 26 19:04:54 powermacg4 postfix/local[10008]: 1868B450E6: to=<[email protected]>, orig_to=<postmaster>, relay=local, delay=0, status=sent (delivered to file: /dev/null)
Mar 26 19:04:54 powermacg4 postfix/qmgr[9956]: 1868B450E6: removed
I know there is a lot of info, and I greatly appreciate the time and effort of anybody willing to look at this. I'm trying to be complete with my first post.
Thanks in advance.
Eric
PowerMac G5 2GHz DP Mac OS X (10.4.5)

Well, spamhaus is listed twice, the first time incorrectly as noted.
You can use the "mapsrbldomains = " syntax, but your Postfix logs themselves will tell you this is now deprecated.
Agreed though: a good idea to separate the rbl options on their own line.
smtpdclientrestrictions = permit_mynetworks
rejectrblclient sbl-xbl.spamhaus.org rejectrblclient dnsbl.sorbs.net
If you indent with whitespace then the line will not be interpreted as a new restriction but part of the prior one.
So you could even format it as:
smtpdclientrestrictions = permit_mynetworks
rejectrblclient sbl-xbl.spamhaus.org
rejectrblclient dnsbl.sorbs.net
If you're serious about taking full advantage of the anti-UCE abilities of Postfix, I suggest reading at http://www.postfix.org/docs.html
starting at UCE/Virus. Ignore linux and other OS-specific tips, or proceed with caution.
http://jimsun.linxnet.com/misc/postfix-anti-UCE.txt
http://www.mengwong.com/misc/postfix-uce-guide.txt
http://www.mengwong.com/misc/postfix-uce-guide.txt
http://sbserv.stahl.bau.tu-bs.de/~hildeb/postfix/
Of course, use at your own risk. But if used judiciously, also your benefit. Backup all config files before editing.

How do I fix a Configuration Error on MacBook Pro?

I have a MacBook Pro 2.4 GHz Intel Core i5 with 8 gigs of memory. I was running CS6 and my video board went out. I got it fixed but lost all my data on my hard drive. So I tried installing cs6 from a disk image that I had saved and after entering the serial code I received that my license was revoked. That could be true since I was at another company when I purchased it. Now I'm trying out the TRIAL Adobe cloud solution and after installing and getting updates, when i clicked on the app I get a configuration error when trying to open the . Do I need to delete some library items that are conflicting when I tried to install CS6?
Here is the error:
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5

Imjoewalkerid the file permissions on your SLStore folder have become compromised. Please see Configuration error 16 | CC, CS for information on how to resolve Error 213:5.

Configuration Error 213:19 Adobe PhotoShop CC when sequenced using Microsoft App-V 5.0

Does anyone out there have a Microsoft App-V 5.0 recipe for Adobe PhotoShop CC ?
When I run the App-V package, I get the License Configuration Error 213:19
Thank You. very much for your time. Karl

You will probably get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Configuration error when open admin tool in BIEE 11g client

Hi All,
I have installed BIEE 11g client in my laptop,the version is 11.1.6.2 ,it has show one error in the installation log :
<action name="Custom Action" target="oracle.bi.CustomIAActionGetInstanceNumber" status="error">
- <AdditionalNotes>
<error>class oracle.bi.CustomIAActionGetInstanceNumber.install() runtime exception:</error>
</AdditionalNotes>
After installation,when I try to open the admin tool in start menu,it show configuration error , but I can open the admin tool through installation directory.
And when I try to import metadata,it also shows connection has failed.
Can any body give some helps on this,thanks a lot.
Ryan.
Edited by: 997662 on Apr 5, 2013 1:39 AM

Hi,
Let me know which version you are using (OBIEE) ?
you are trying to install Client (Admin Tool) and OBIEE server in same machine ?
Thx,

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Report Viewer Configuration Error

Hi,
I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
when attempting to open a report in the Microsoft Visual Studio Report Viewer:
Report Viewer Configuration Error
The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
Internet Information Services 7 or later.
Has anyone seen this error before, or have any advice on finding a solution?
Thank you.

Hi HealthServices3300,
You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
issue, please post this issue to
this forum. If it's a report viewer control issue, you can post this issue in
this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SQL Server Reporting Services Configuration Error(Subscription)

I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
I also have few questions regarding Configuration;
What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
Here is the error I am getting in the log file..
ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
more information., AuthzInitializeContextFromSid: Win32 error: 110;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
   at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
   at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
   at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
   at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
secondaryStreamNames)
   at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
I also get following error when I try to create email Subscriptoin
w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
error code 0x6e.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
   at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
   --- End of inner exception stack trace ---
Thanks,
RP

Hi RP,
For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
1. Backup the encryption key using Reporting Serivces Configuration Manager.
2. Change the service account using Reporting Serivces Configuration Manager.
3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
For your others questions, please see the following inline reply:
--What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
--What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
--What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
For more information, please see:
Configuring the Report Server Service Account:
http://msdn.microsoft.com/en-us/library/ms160340.aspx
Execution Account (Reporting Services Configuration):
http://msdn.microsoft.com/en-us/library/ms181156.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

Laptop crashed, moved HDD to another PC to use CS5 but it gives me a Configuration Error. Error:6

Hi, My laptop containing Adobe CS5 recently crashed. I do not have the serial as this was activated at my school and they only do it once for everyone. What I did was to take the HDD out and put it onto my PC and try to use the application from there, a method which worked before on other applications, but when I wanted to load up dreamweaver and any other applications in the suite it failed to load and popped out the following message:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Configuration Error
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of the screen.
Error:6
http://www.adobe.com/support/
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Can anyone help me out? I don't have the serials nor the CD to reinstall so I'm practically stuck and I cant afford to buy the thing again.

Adobe applications simply don't work that way. Installation puts software and configuration information not only in application-specific directories under \program files\, but also in system directories. As such, Adobe application installations are not portable.
Unfortunately, in order to re-install your software, you will need to go back to your “school” for installation media and serial number information since the software was licensed through them and not directly via Adobe.
- Dov

MAR Transport Configurator ERROR

Similar Messages

Maybe you are looking for