MARA-GEWEI is not overtaken during creation of material from cdesk

Hi, we work in ENV SAP R3 4.71 and create material in background out from
cdesk.
Therefore we defined in the customizing of CAD Desktop that in case of
creation of material MARA-GEWEI determination type = constant and
determination parameter is "ST" for "piece"
Every other parameter works fine during creation of material ==> as soon as
we fill a weight into the corresponding fields SAP tells us a message
"ENTER the unit of weight for the net weight" ==> if you press "continue action then" SAP ends creation of material an nothing happens....
ANY ideas?
(will enter this message for sure as well into the oss....)

Hi Gerhard,
have u put
EXP_MARA-BRGEW           Gross weight
EXP_MARA-NTGEW            Net weight
from Inv side in config...
Also check in cdesk_cus under create material
<b>Base Unit of Measure               Constant     ST
Net Weight               File Attribute     Physical_Properties_MassValue</b>
hope this helps

Similar Messages

Creation of Material from SAP VIEW using CDESK.

Hi Experts,
I have one question related to creation of Material from SAP View.
CAD file created say SM1000.prt
Create DIR in CAD View say SM1000
Scenario 1 :   Create Material in Background from CAD VIEW or SAP VIEW from cad desktop, It creates material SM1000
                           in background.
Scenario 2 : Open CDESK ( Transaction)
                        Click on OPEN,
                        Selecting the DIR created SM1000
                        Create the material in background in SAP View, it gives message " enter material number"
Why am not able to create the material from SAP view using CAD Desktop. If any modifications needs to be done in CDESK CUS to solve this please let me know.
Thanks,
Sudharshan

Hi Sudharshan,
maybe the reason for this is that your CAD applications provides a special material number and the customizing in CDESK is defined to use this number. In this case the number or value can by provided from the CAD application only from the CAD View.
In the SAP view the material gets created like in MM01 for example and so mabye you have to enter a material number.
Best regards,
Christoph

Nav Attributes not seen during creation of RKF in Query Designer

Hi
SCENARIO
I have a Char InfoObject POSTFI[POSTFI is Navigational Attr] with 3 Navigational Attributes included in the InfoCubes.
1. ZINREPIND Reporting Indicator
2. ZFITMCD01 Statement 01 Financial Item
3. ZPCNR1 Profit Center Indicator
NOTE: All the above mentioned Nav Attr are properly set as Nav Attr and Active, Check and Rechecked.
We have 2-InfoCubes Current and Historical[both have same Structure].
A MultiProvider is build using the above 2-InfoCubes and the Char InfoObject PostFi is included in the MultiProvider.
Now I am trying to Create a Report using Query Designer and in that I have to Create a RKF[GrossSales1] and
the Condition for which is KeyFigure=FINAMT, where POSTFI_ZFITMCD01 = 5010, POSTFI_ZPCNR1= Y
PROBLEM
I can see the Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1 in the main Screen of the Query Designer's LeftHandSide Pane containing KeyFigures and Dimenions under Dimension Financial=> PostFi=> Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1.
While creating the RKF on KeyFigure FINAMT I am just able to see the InfoObject POSTFI[in its resp Dimension] in the
Display RKF GrossSales1 Screen in the Left Hand Side Pane where we see the KeyFigures and Dimensions.
But I am NOT able to see the Nav Attr's ZINREPIND, ZFITMCD01, ZPCNR1 anywhere in the LHS Pane of the Display RKF GrossSales1 Screen.
Now I cant Create the RKF bcoz I cant see the 3NavAttr's of Char InfoObject PostFi it the LHS Pane and the 2-Nav Attr required for creating the RKF.
Can anyone PLEASE let me know How can I see/bring these Nav Attr ZINREPIND, ZFITMCD01, ZPCNR1 in the LHS Pane of the RKF Creation Screen to add them to make my RKF ?
Thanx in Advance

Hi
As per your explanation, below are the details
POSTFIPOSTFI --- This is navigational attribute which has below 3 objects as navigation attrs.
1. ZINREPIND Reporting Indicator
2. ZFITMCD01 Statement 01 Financial Item
3. ZPCNR1 Profit Center Indicator
first one, could you please confirm whether POSTFIPOSTFI is main info object or it is attribute of another info object.
If it is attribute of another info object, then the last attibutes(3) are called Transitive attribute(attributes attribute).
Reporting on Transitive attributes is only possible with the creation Info Sets.
If my guess is correct, then create Info Set based two info cube now create the query.
Hope it will work
Regards,
Venkatesh.

Profit Segment not activated during creation of purchase order item

Hello,
While I create a Purchase Order Item, in the account assignment tab, I may fill in at least a cost center or a cost center and an internal order.
If I fill in only a cost center and key the enter buton, the profit segment is activated.
If I fill in the cost center and the Internal Order at the same time and afterwards I key the enter button, the profit segment is not activated. I have to click on the Profit segment button and validate the profit segment manually.
Could you tell me what the problem is?
Thank you in advance
Regards

Hi
That makes sense to me
In any entry you can enter One REAL Object and more than one Stat Object...
SInce you entered Cost Center in Option 1 - You were proposed with PSG and IO as the option
Since you entered Cost center *** REAL IO in Option 2 - The system got what it wanted i.e. One REAL OBJECT.. hence, no more objects are proposed to you... However, you can manually enter PSG or WBS if allowed in your Field Status Group in FI
br, Ajay M

Grant TRANSPORT does not exist during creation of Shopping Cart(Error Msg)

Hi,
When i create a SC in SRM 7.0 system, it gives following errors once i check the document.
(01) Grant TRANSPORT does not exist
(02) Master record for commitment item /TRANSPORTTRANSPORT does not exist
In the backend ECC G/L Account we have a Commitment Item "Transport" in Create/bank/interest tab attached to the G/L.
SRM side: In Account assignment tab of SC, i choose a same G/L which is being mapped to Prod Cat.
But no where the Grant is active. Is there any option for defining a Commitment item on SRM side. I feel the error is coming on SRM side when i try to create an SC!
Best Regards,
Aj!

Hi there,
See response from developer on this.
SRM SE11 structure BBPCOBL1_470 last field sequence is not in synch
ERP                         SRM
BBP_COBL_47A                BBPCOBL1_470
ACC_NO                      ACC_NO
.INCLUDE                    BUDGET_PERIOD
GRANT_NBR                   .INCLUDE
CMMT_ITEM_LONG              GRANT_NBR
.INCLUDE                    CMMT_ITEM_LONG
BUDGET_PERIOD               .INCLUDE
                            DUMMY_EEW_PD_ACC_CHK
Please adopt SRM structure BBPCOBL1_470 so that new field BUDGET_PERIOD
is placed right after last .INCLUDE.
Hope this helps,
Kind Regards,
Matthew

Deleting TO postions during creation of TO from TR

Hi Gurus,
is there a possibility to delete TO positions during the creation process.
Requirement is:
I have a Transport Requirement of material x with an amount of 1000 pc. The TR is converted to a TO automatically (RLAUTA10).
The warehouse situation is the following:
700 pc of material x are on storage bin 1234
900 pc of material x are on storage bin 4567
With the batch job 2 TO positions are created. 700 form bin 1234 and 300 from bin 4567.
I want to avoid 2 TO positions in this case, there should only be one position with the 700 pc.
Is there a way to achieve this?
Thanks in advance.

Hi
Its not clear, could u pls clarify.
is your requirement to create single TO from TR instead of 2 TOs? - if so, it depends on your Picking strategy, pls set your Stock Removal strategy accordingly.
Rgds
Ram

DIR no. not showing after creation of DIR from Easy DMS

Dear Friends,
I could able to create DIR from Easy DMS. But I could not able to see DIR no. after creation, so that I do not document created or not ? If created what is the no. I need to open thru search or other way.
Is it standard functionality.
Can we change this by any functioanl module or any BADI implementation?
Regards,
Sai Krishna

Hi Sai
When you creating a DIR through Easy DMS it will ask you document type and description. In the same window as prasad mentioned 4th tab "Techinal Details" you can find the document number,document type, document part and document version. After creating the document it will create in the folder with all the remaining details with default layout.
e.g: Document Description | Status Description | Document Number | Type | Version | Part | User | Change Number ... other details.
Test | Create Document | 10000000304 | DOC | 00 | 000 |...etc
Please check the DIR while creating. Surely it will be available.
Thanks
Prasad

Dump During Creation of Material

Hi,
I faced this dump whenever I tried to create a material in SD (MM01).
In the error log, the function module: CRM_GET_TRANSFER_STRUCT is call, but when I check this function module using Txcode: SE37, this function module is not maintained ( meaning that, no such function in SAP system). This is the reason why the short dump happened ( calling an function that does not exist).
Does any one knows this?
Cheers,
Norman.

Got it.See note 1021881.
Cheers.

RFC Call to R/3 from EBP during creation of SC from CCM

Hi All,
I want to know the RFC Function moule which will call to R/3,
when an item is added to the shopping Cart from a CCM catalog or from an existing Shopping cart.
Assured Points
Thanks in Advance

Hello All ,
I want to check R/3 Contracts every time when a SC is being created
from a CCM catalog or from an existing SC. The check to be performed is whether there is any deletion flag for the Contract/Contract Item. If the R/3 contract has a deletion flag active for the item added to SC, program will generated a warning message.
So kindly tell me what is the RFC that to be called in EBP to check. And I hope I need to implement the changes in Check Badi.
Kindly Advice.
Assured Points.
Thanks in Advance.

Problem arise during transfer of material from one company code to other co

Dear CONS
While doing transfer from one company code to other company code by using movement type- 301 ( direct one step) we got one error message '' Field Bus. Area is a required field for G/L account JDPO 16020202
    Message no. F5808
Diagnosis
    The value for field "Bus. Area" in the interface to Financial Accounting
    is an initial value but you are required to make an entry in the field
    selection for G/L account "16020202" in company code "JDPO" linked to
    the field selection for posting key "21".
PL. SOLVE IT WHERE IS THE SETTING.

no, the system is not accepting the GL ACCT. as it is a balace sheet account. pl. help.
Edited by: nirupama swain on Sep 23, 2010 7:00 AM

Creation of material from excel sheet

Hi All,
Can we create material by uploading from excel sheet.
I have created all necessary product categories in system.
I want to create 20 materials in one product category from excel sheet.
Abdul Raheem

Hi Abdul,
have you tried to import the data via Import Data (System Administration --> Import and Export Tools --> Import Data).
Also did you use the correct template; to access the correct template, please follow these steps:
Go to Import Data
Insert a dummy .xls file
From the dropdown list, choose Materials
On the next screen, download the template.csv file
Populate the fields as required on that spreadsheet
Repeat the import.
Hope this helps, if it solves your question, please mark this answer as solved.
Thanks,
Armin

Creation of Materialized view and Materialized view log.

I wanted to create materialized view with 'REFRESH FAST ON COMMIT' option.
1) Table1 --it is partitioned range + list -- Added primary key
2) view1   -- having primary keys on view's base table
Steps:
1) create materialized view log on Table1 ; -- default primary key
2) create materialized view log on view1. --- It is giving below error.
ORA-00942: table or view does not exist
i wanted to create Materialized view like below
create materialized view
REFRESH fast ON commit
as
select ...
... from table1
where c1 in (select c1 from view1 where ... );
Question:
1) As i am getting above error while creating MV log on view. Can we create MV log on view or we have to create MV log on view base table?
2) To create MV with ''REFRESH FAST ON COMMIT' option , do we need to have primary key on master tables?
Any pointers on this will really helpful.
Thanks
Prasad

Also created MV LOG on 3 tables and tried with joins ..
create materialized view
REFRESH fast ON commit
as
select ...
... from table1 , tab2 t2,tab3 t3
where ....
and ...
Get same error ORA-12052: cannot fast refresh materialized view AVSYS.EVENT_LOG_MV
2052. 00000 - "cannot fast refresh materialized view %s.%s"
*Cause:    Either ROWIDs of certain tables were missing in the definition or
           the inner table of an outer join did not have UNIQUE constraints on
           join columns.
*Action:   Specify the FORCE or COMPLETE option. If this error is got
           during creation, the materialized view definition may have be
           changed. Refer to the documentation on materialized views.

BBP_PO_SEND_XML - Not triggered during the creation of PO

Hi All,
We are using SRM 7.0, configuration for sending PO in the form of XML is done as suggested with the method BBP_PO_SEND_XML. The problem is, this BADI is not triggered when we save (even after order) the PO with XML option and the status is displayed as Incorrectly processed. But, when I select the Incorrectly processed output type and click on Repeat Output, the BADI is called and is processed succesfully.
Any reasons, why the BADI is not triggered during the creation or change of PO and is getting triggered only when we select the option Repeat Output? Please help me in correcting this issue.
Thanks,
Phani.

Logic inside META_PO_SEND was written in user name check. Whereas the method BBP_PO_SEND_XML is triggered with batch user. Due to this reason, custom logic is not triggered.

RC-00118: Error occurred during creation of database Raised by oracle.apps.

Hi Experts,
Please note i am doing the clonning from production to test server.
Production Server -
1. Run the adpreclone.pl on the apps & db tier.
2. run the autoconfig on the apps and db tier.
3. shut down the production instance.
4. Moved the files and started the clonning process on the db tier i am getting the below issue.
My current E-Business Suit Version is R12.0.4 Database Version is 10.2.0.3. Operating system is SUN SPARC 64 BIT SUN SOLARIS 10.
Executing CreateDB...
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
adcrdb.sh started at Wed Mar 21 18:09:54 WAT 2012
The environment settings are as follows ...
ORACLE_HOME : /erptestdata2/u01/d01/tech_st/10.2.0
ORACLE_SID : TEST
TWO_TASK :
PATH : /erptestdata2/u01/d01/tech_st/10.2.0/perl/bin:/erptestdata2/u01/d01/tech_st/10.2.0/bin:/usr/ccs/bin:/usr/sbin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/erptestdata2/u01/d01/tech_st/10.2.0/appsutil/clone/bin/../jre/bin:/usr/sbin:/usr/bin:/opt/EMCpower/bin:/etc/emc/bin:/etc:/usr/ccs/bin:/usr/openwin/bin:/usr/dt/bin:/usr/platform/SUNW,SPARC-Enterprise/sbin:/opt/sun/bin:/opt/SUNWexplo/bin:/opt/SUNWsneep/bin
LD_LIBRARY_PATH : /erptestdata2/u01/d01/tech_st/10.2.0/lib:/usr/dt/lib:/usr/openwin/lib:/erptestdata2/u01/d01/tech_st/10.2.0/ctx/lib:/erptestdata2/u01/d01/tech_st/10.2.0/lib32
Executable : /erptestdata2/u01/d01/tech_st/10.2.0/bin/sqlplus
The log information will be written to
     /erptestdata2/u01/d01/tech_st/10.2.0/appsutil/log/TEST_proddb/adcrdb_TEST.txt
Creating the control file for TEST_proddb database ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:09:54 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected to an idle instance.
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
ORA-01507: database not mounted
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
ORA-00205: error in identifying control file, check alert log for more info
BEGIN dbms_backup_restore.zeroDbid(0); END;
ERROR at line 1:
ORA-00210: cannot open the specified control file
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 4168
ORA-06512: at line 1
ORACLE instance shut down.
Connected to an idle instance.
ORACLE instance started.
Total System Global Area 1073741824 bytes
Fixed Size          2035496 bytes
Variable Size          432017624 bytes
Database Buffers     624951296 bytes
Redo Buffers          14737408 bytes
CREATE CONTROLFILE REUSE SET DATABASE "TEST"
ERROR at line 1:
ORA-01503: CREATE CONTROLFILE failed
ORA-01167: two files are the same file/group number or the same file
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/olap.dbf'
ORA-01110: data file 31: '/erptestdata2/u01/d01/apps_st/data/odm.dbf'
alter database open resetlogs
ERROR at line 1:
ORA-01507: database not mounted
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp01.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp02.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp03.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP2 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp04.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
alter tablespace TEMP1 add tempfile '/erptestdata2/u01/d01/apps_st/data/temp10a5.dbf' REUSE
ERROR at line 1:
ORA-01109: database not open
ALTER DATABASE RENAME GLOBAL_NAME TO "TEST.clientdomain"
ERROR at line 1:
ORA-01109: database not open
Error Running create/replace library with adupdlib.sql
ORA-01109: database not open
PL/SQL procedure successfully completed.
File created.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
exit_code=0
Checking for errors ...
The database has not been successfully created. Shutting down the instance ...
SQL*Plus: Release 10.2.0.3.0 - Production on Wed Mar 21 18:10:16 2012
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Connected.
ORACLE instance shut down.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
.end std out.
.end err out.
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : proddb
sDbDomain : clientdomain
sDbPort : 1530
sDbSid : TEST
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@proddb.clientdomain:1530:TEST
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST)))
Exception occurred: java.sql.SQLException: ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
SVR4 Error: 2: No such file or directory
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=proddb.clientdomain)(PORT=1530))(CONNECT_DATA=(SERVICE_NAME=TEST.clientdomain)))
Connection could not be obtained; returning null
-------------------ADX Database Utility Finished---------------
RC-00118: Error occurred during creation of database
Raised by oracle.apps.ad.clone.ApplyDatabase
Please advise ASAP.
Regards
Mohammed.

Nikki,
Check alert<SID>.log file for more details about the error.
It looks like that the source database was not cleanly shutdown before copying the files to the target node. Please do the following and check then:
SQL> connect / as sysdba
SQL> startup mount;
SQL> recover database using backup controlfile until cancel;
-- type CANCEL
SQL> alter database open resetlogs; If the above does not help, then shutdown the source database normally (make sure it is down), re-copy the files and start the cloning process again.

Grayed sold-to party during creation of quotation

Hi,
I've created new document type (quotation) and it works fine, but during creation of a quotation Sold-to and ship-to are grayed, so I cannot change it. Even quotations replicated from CRM does not have solt-to and ship-to. What should be change in order to make ship-to and sold-to editable?
Marek

hello, friend.
was your quotation created with reference to other documents like, say, inquiry of CRM documents? if so, then the quotation copies the sold-to party from the previous document and restricts changes in the sold-to party.
if your quotation was not copied with reference, then do VOV8 and check your document type and see if there is an entry in General Control > Reference mandatory.
also, this may have been affected by copy controls in VTAA, header > DataT (value 001 partner header).
regards.
Edited by: jonathan yap on Mar 5, 2008 6:51 PM

MARA-GEWEI is not overtaken during creation of material from cdesk

Similar Messages

Maybe you are looking for