MARC-VMTRA exceeded by 630 M : M01R901112 1100 FG01 OPENSTOCK

While doing GR against STO i m facing this problem
MARC-VMTRA exceeded by 630 M : M01R901112 1100 FG01 OPENSTOCK
OPENSTOCK is batch number
In Outbound Delivery,Actual goods Issue Date is 01/05/2010.While i am doing GRN with posting date 02/04/2010.
STO date is 01/04/2010
In stock in transit 630m is showing.
How to resolve this issue.
Please guide as early as possible
Thanking You,

this problem ocuure when your psoting date of outbound delivry differs to GR processing .
E.g :if ur outbound delivry is 30.04.2011 & posting date is 02.05.2011 & when ur making GR by oudbound delivery reference at that time if u entered the posting date  & excise invoice date 30.04.2011 then u will face this MARC-VMTRA EXCEED Problem but if u used the same posting date(02.05.2011) as outbound delivery then this probelm will not ocuure.
Thanks & Regards,
Pravin Patil
SAP Officer
KLT

Similar Messages

  • Error at Migo of Stock Transfer.

    Hi Experts,
    During MIGO(Goods Receipt) against  STO(stock transfer Order)  of Finished Goods,  in previous date the message coming is :-
    MARC-VMTRA exceeded by 32.000 BOX : 49 DROO 0007 MFGPRODUCT
    49 is material no
    droo is plant
    mfgproduct is split valuation.
    kindly guide me what does it mean and in which direction should I proceed to solve the problem.
    Thanks
    Anupam.

    you only have 17 in transit in the previous period.
    Just use SE16 at table MARC. and check what value you see in the field VMTRA.
    You cannot receive more than the quantity that was issued.
    If really 49 were issue in the previoius month, then any other goods receipt  (or goods issue cancellation) must have been made that had reduced the in-transfer stock.
    Check this with MB51.

  • Posting in prv period for actual GI date

    Hi,
    I want to post a outbound delivery  in the prv period as 31.12.2009  so that I can make GR in prv period posting date as 31.12.2009. ofcourse the period is open for Dec'09 and Jan'10 . I tried by changing date in field actual GI in vl02n  and saved the delivery , but system takes todays date as posting date. That is system allows posting date for the month of Jan'10 while GR . Is there any method by means I can get this changes saved and take entry in GR.
    Thanks & Best Regards,
    AK

    In my system it accepts 31/12/2009 in actual GI date , when  I checked up the material document & account document for this perticular OBD under document flow , I get posting date as 08.01.2010 and the posting period as 10 and 2009 generated internally. That's why I get ERROR like "MARC-VMTRA exceeded by 16.090 MT"  if I take posting date 31.12.2009 in GR, where as for posting date 01.10.2010-08.01.2010 does not show any error. This is my assumption.
    Will pl check in your system the document flow -> material document & account document posting date for OBD.
    Thanks & Regards,
    AK

  • Unusual Error,when doing MIGO

    Hello Experts..
    When we are doing MIGO,we are getting the following error.
    " MARC-VMTRA EXCEEDED by 7.3 TO.".
    Tried a lot....  but not understanding.
    Pls GUIDE....
    VERY VERY URGENT.....!
    Rgds
    sumanth.G

    Dear Sumanth,
    Your problem might be Plant Data for Material Stock in transit for prev. period is reached its level.
    check your stock level as well material master settings mean MRP or Forecast settings
    Hope problem will solve
    Prem

  • More Quantity of Raw Material noticed in Quality Inspection

    Dear Experts,
    We have done GR against the PO for a material. But in Quality Inspection, we have noticed that there is excess quantity of stock received which is more than the inspection lot quantity.
    My issue is that inspection lot quantity will be created for the same quantity for which GR has been done.
    I can not post more quantity than the inspection lot quantity. So how to post the excess quantity into stock?
    Please suggest.
    Regards,
    Phani

    Dear Sujit,
    Thanks For the quick reply.
    While performing the same, as suggested by you, I am getting the error
    PU Ordered quantity exceeded by 300 M : MPXSXWRT 1100 1104 1000009071
    Message no. M7022
    Diagnosis
    The specified stock level or quantity is exceeded by 300 M.
    System Response
    If the message is an error message (E), the above is not allowed.
    If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity
    But, I have already maintained in OMCQ transaction for Message 022, Application area M7 as u201CWu201D.
    But still the system is giving an error message.
    Hi Kent9999,
    I didnu2019t understand how QP02 will help me.
    Regards,
    Phani

  • Help cleaning up a script to search in Finder with Spotlight?

    I don't know much AppleScript at all, but managed to cobble together a script (invoked with Alfred) that opens a Finder window, sets the size, view options etc. and searches for Photoshop documents with the term passed from Alfred.
    As it's cobbled together I'm guessing there are much cleaner, efficient, and more elegant ways of doing this. Any help cleaning it up would be greatly appreciated. Here's the script:
    -- set q to "wobbly jelly" -- Test search
    on alfred_script(q)
              set theSearch to q
              tell application "Finder"
      activate
      open computer container
      -- Set the folder view
                        tell Finder window 1
                                  set the bounds to {630, 150, (630 + 1300), (150 + 1100)}
                                  set toolbar visible to true
                                  set the sidebar width to 180
                        end tell
              end tell
              tell application "System Events"
      -- Focus to the search field
      keystroke "f" using {command down, option down}
                        delay 0.4
      -- Type the search   
                        keystroke "kind:photoshop " & theSearch
              end tell
      -- Arrange by…
              menu_click({"Finder", "View", "Arrange By", "Date Modified"})
      -- Set to Icon View
              tell application "Finder"
                        set current view of Finder window 1 to icon view
                        tell icon view options of Finder window 1
                                  set icon size to 128
                                  set shows icon preview to true
                                  set shows item info to true
                        end tell
              end tell
    end alfred_script
    -- `menu_click`, by Jacob Rus, September 2006
    -- Accepts a list of form: `{"Finder", "View", "Arrange By", "Date"}`
    -- Execute the specified menu item. In this case, assuming the Finder
    -- is the active application, arranging the frontmost folder by date.
    on menu_click(mList)
              local appName, topMenu, r
      -- Validate our input
              if mList's length < 3 then error "Menu list is not long enough"
      -- Set these variables for clarity and brevity later on
              set {appName, topMenu} to (items 1 through 2 of mList)
              set r to (items 3 through (mList's length) of mList)
      -- This overly-long line calls the menu_recurse function with
      -- two arguments: r, and a reference to the top-level menu
              tell application "System Events" to my menu_click_recurse(r, ((process appName)'s ¬
                        (menu bar 1)'s (menu bar item topMenu)'s (menu topMenu)))
    end menu_click
    on menu_click_recurse(mList, parentObject)
              local f, r
      -- `f` = first item, `r` = rest of items
              set f to item 1 of mList
              if mList's length > 1 then set r to (items 2 through (mList's length) of mList)
      -- either actually click the menu item, or recurse again
              tell application "System Events"
                        if mList's length is 1 then
      click parentObject's menu item f
                        else
                                  my menu_click_recurse(r, (parentObject's (menu item f)'s (menu f)))
                        end if
              end tell
    end menu_click_recurse

    Mainly just grouping the separate cobbles together, although there is a shortcut that gets rid of all that System Events stuff for the find parameter.  Note that in Mavericks the icon view won't immediately update - changes will be applied when the window target changes.
    on alfred_script(theSearch)
      tell application "Finder"
        «event aevtspot» "kind:photoshop " & theSearch -- shhh - don't tell anyone...
        tell Finder window 1 -- Set the folder view
          set the bounds to {630, 150, (630 + 1300), (150 + 1100)}
          set toolbar visible to true
          set the sidebar width to 180
          set current view to icon view -- set the icon view
          tell its icon view options -- view options may not immediately update in Mavericks
            set icon size to 128
            set shows icon preview to true
            set shows item info to true
          end tell
        end tell
      end tell
      menu_click({"Finder", "View", "Arrange By", "Date Modified"}) -- Arrange by...
    end alfred_script

  • What is the Firefox phone number for help?

    I need
    the Firefox help phone number.
    -Marc Craig
    <! --(330-630-8124) -->
    ''Phone number hidden. Please do not post sensitive information. See [[Forum Rules and Guidelines]]''

    Unfortunately, Mozilla does not provide phone support. Please post your inquiry here, and we will update the title and description for you.
    Thanks

  • Time Limit exceeded Error while updating huge number of records in MARC

    Hi experts,
    I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
    used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
    getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
    as we want to update.
    Below is the part of code in my proxy
    Call the BAPI update the safety stock Value.
        CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
          EXPORTING
            headdata                    = gs_headdata
            CLIENTDATA                  =
            CLIENTDATAX                 =
           plantdata                   = gs_plantdata
           plantdatax                  = gs_plantdatax
           IMPORTING
              return              = ls_return.
        IF ls_return-type <> 'S'.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          MOVE ls_return-message TO lv_message.
    Populate the error table and process next record.
          CALL METHOD me->populate_error
            EXPORTING
              message = lv_message.
          CONTINUE.
        ENDIF.
    Can any one please let me know what could be the best possible approach for this issue.
    Thanks in Advance,
    Jitender
    Hi experts,
    I have a interface requirement in which third party system will send a big file say.. 3 to 4MB file into SAP. in proxy we
    used BAPI BAPI_MATERIAL_SAVEDATA to save the material/plant data. Now, because of huge amount of data the SAP Queues are
    getting blocked and causing the time limit exceeded issues. As the BAPI can update single material at time, it will be called as many materials
    as we want to update.
    Below is the part of code in my proxy
    Call the BAPI update the safety stock Value.
        CALL FUNCTION 'BAPI_MATERIAL_SAVEDATA'
          EXPORTING
            headdata                    = gs_headdata
            CLIENTDATA                  =
            CLIENTDATAX                 =
           plantdata                   = gs_plantdata
           plantdatax                  = gs_plantdatax
           IMPORTING
              return              = ls_return.
        IF ls_return-type <> 'S'.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          MOVE ls_return-message TO lv_message.
    Populate the error table and process next record.
          CALL METHOD me->populate_error
            EXPORTING
              message = lv_message.
          CONTINUE.
        ENDIF.
    Can any one please let me know what could be the best possible approach for this issue.
    Thanks in Advance,
    Jitender

    Hi Raju,
    Use the following routine to get fiscal year/period using calday.
    *Data definition:
    DATA: l_Arg1 TYPE RSFISCPER ,
          l_Arg2 TYPE RSFO_DATE ,
          l_Arg3 TYPE T009B-PERIV .
    *Calculation:
    l_Arg2  = TRAN_STRUCTURE-POST_DATE. (<b> This is the date that u have to give</b>)
    l_Arg3  = 'V3'.
    CALL METHOD CL_RSAR_FUNCTION=>DATE_FISCPER(
      EXPORTING I_DATE = l_Arg2
                I_PER = l_Arg3
      IMPORTING E_FISCPER = l_Arg1  ).
    RESULT = l_Arg1 .
    Hope it will sove ur problem....!
    Please Assign points.......
    Best Regards,
    SG

  • Free item gets confirmed before main item if credit limit is exceeded

    Hi,
    I am facing an issue,My stock balance is 10000,in sales order ordered main item is 11000 and free items is 1100.IF the credit limit is not activated for the customer means,Scheduled quantities is coming perfect.
    Now,The customer's credit limit got exceeded and sales order is released via vkm3 the system is confirming only free items(Tann).It's not confirming main items(Tan).
    Kindly suggest me.
    Regards,
    Prabhu.

    Hi
    The only other way i see to stop is to tick / activate complete delivery indicator in Sales Order and use incompletion procedure or make this field as mandatory in customer master but in the second case it will be applicable for all orders for customer .
    Regards
    Rohit

  • Budget Exceeded error while changing in Account Assignment

    Hi,
    The user is facing an error while changing the Accounts assignment category to "Assets" in a PR. The PR was created with AAC as "U" for all the line items. The user is changing that to "A". After that he provides the asset number then the error is coming as below:
    Item 010 Order 0809/A15 budget exceeded
    Message no. BP604
    Diagnosis
    In document item 010 Order 0809/A15, budget for fiscal year 2010 was exceeded by 6,630.00 INR.
    The valuation price for that particular line item is Rs 6630.00. I have not changed the other line items.
    Need the suggestion.
    JK

    I think there some settings in Budgeting, n Finance people are more familiar with those settings. Normally, if u craete a Purchasing doc. PR or PO or GR/ IR from MM side, with account assnt., the relevant budget()which is created for that commitment item) will updated with the document value. There may be settings with delivery date or so. check with your FI guys
    umakanth

  • Report for Qty Contract and Value Contract with PO release exceeding limits

    Hi All,
    Is there a std report in SAP that the users can use to view Qty and Val Contracts that has exceed in Qty (in case of Qty Contracts) or Val (in case of Val Contracts) ?
    Thanks in advance!

    hi Duke,
    If thinking logically, then there is no report for the same..this may be because you enter the qty or value limits in the contract doc itself....So, when you make the PO for the same, and if the qty or value exceeds the system automatically provides the message..stating that the qty or value has exceeded....
    So, there is no report for the same...
    Hope it helps...
    Regards
    Priyanka.P

  • Error in executing a process for Flex compilation ....exceeds 32K...

    Hi,
    deployin my model i get the following error-message.
    "Error in executing a process for Flex compilation, Error: Branch between 64935 and 97770 around line 0 exceeds 32K span. If possible, please refactor this component.
    Error: Branch between 64935 and 97770 around line 0 exceeds 32K span."
    Do i delete a sort-element from my model it is deployed very well. So what does this message exactly mean and how can I locate where the error occurs and how can i fix that problem because i need this sort-element to be in my model.
    Thanks for your help!
    Tobias

    Hi Tobias,
    You are receiving this error due to a current limitation in the Flex server. How you can fix this is to split the iView you are currently working on into two iViews, and embed one within the other. This will decrease the size of the current iView you are receiving the error for and eliminate this problem.
    Hope this helps
    Cheers,
    Scott

  • Error while executing a report : Time limit exceeded

    Hello Experts,
    i have executed a report  and it took long time and finally throw an error saying that time limit is exceeded ,
    please suggest how to resolve the problem
    Thanks in Advance
    Nitya

    Hi Nitya H,
    There are many resons behind Time out issue.
    It is better to find where exaclty, our report is taking more time.
    Below are the some of the bottle necks we need to monitor for time out issue:
    1) OLAP query generation time.
    2) F4 Search time.
    3) Read Cache.
    4) Write Cache.
    Above features we can monitor @ RSRT transaction.
    If OLAP query generation time is taking much time means ,pls regenerate the query @ RSRT.
    For F4 search ,keep mater data as data retrival target.
    For Read Cache and Write Cache increase the query memory @ RSRT.
    Plse check the report and let me know if there is other bottle necks for query execution....
    _Note:_ This is just a high level view but we can have many performance drills...like Free char ,complex calculated key fig...etc..
    Hope this may helps you...
    Cheers,
    Maruthi

  • Budget Exceeded but no Error message Assign more than allocated

    Hi Gurus,
    I am stuck in a situation where the Error Message BP603 while creating a PO for a wbs at level 2.
    IN cj30 , i found out that  Budget = 69500000 and assigned = 69950772
    if i create a PO OF even .30 (thirty paisa) the budget exceeded amount = 450772.35, which is actually the diffrecene betweenn assigned and Budgeted values.
    Now we are not able to raise any PO
    Below is tolerance limit
    please key in your valuable inputs.
    Regards
    Rohit

    Hi Rohit,
    In Budget report, Assigned value = Actual + Commitment
    If your assigned value is great than Budget, then you will get Budget exceeded error when you try to do any further posting against specific WBS element.
    So, you will need to supplement Budget to cover shortfall.
    You can also refer following SAP note which shows how assigned value is calculated.
    178837 - Availability control: Incorrect assigned value?
    There are lot of threads already discussed in this forum for error message you are mentioning.
    Please search them.
    Regards
    Tushar

  • No puedo conectar iCloud desde Windows vista, me marca error de servidor. Que hago para poder acceder iCloud desde vista?

    No puedo conectar iCloud desde Windows vista, me marca error de servidor. Que hago para poder acceder iCloud desde vista?

    The neighbor discovery on mac and PCs is based on broadcast.
    I think it's the same for yoru SQL application.
    Broadcast are blocked by default on the controller. You can enable "broadcast forwarding" in the controller menu

Maybe you are looking for

  • Down Payment clearing at the time of Goods Receipt

    Dear All, We have activated the setting "Configure Automatic clearing of Down Payments". We are entering down payment in PO and while processing Goods Receipt system is generating automatic down payment clearing document. The issue is the document po

  • Routine in DTP to load data from previous fiscal period - current

    Hi Friends, I want to load data for previous & current fiscal period and I want to write a routine in DTP to automate this process, can any one help me with this routine! Thanks & Regards, vidiyala

  • Cannot deactive acrobat pro 9

    Hi I have been trying to deactivate acrobat pro 9 so I can transfer the license on to another pc. I go in to the help menu and deactive is greyed out, but the product is activated. can anyone help out with this?

  • Issue in Win7 when opening the XLS with OLE

    HI,experts: I find a issue in Win7: when I opening the XLS with OLE, CALL METHOD OF go_workbooks 'Open' EXPORTING #1 = 'D:\1.xls'. the sy-subrc = 2, but this issue is not exist on PC which run Win XP. How to resolve the issue in Win7? Thanks. below i

  • Original Filename not saved if renaming during original import - Why?

    From what I have read online and what I have seen personally, it seems the concept of "Original Filename" is different depending on whether one renames during import vs after the fact. The files I renamed after the fact can be restored to the true fi