Margin 0 auto is not working in IE

This has got to be something super simple, but I'm missing something.
My div will not center in IE. I've broken it down to as basic as I can get it, but still no centering.
http://gtworkspace.com/junk/newIndex.html

You need 3 things to center a division.
     a valid HTML document type,
     a stated width in pixels, ems or %,
     margin-left and margin-right of auto.
Your document type is not valid.
Nancy O.

Similar Messages

Auto brightness not working in ios6

I updated my iPad (3rd gen) to ios6, but when the update is complete i found that the auto brightness not working, when i use the ipad on dark room the brightness not changing, when i use ios5.1 it changing.. Any solution and actually the problem is on ios or in the hardware? Looking for help asap...

Well my device is different and since it is a iPhone 5, it is not being updated to iOS 6 but the issue is exactly the same. From my mind this could be up to software but also could be from an hardware issue. The thing is that even if it worked before iOS 6 for you the new software could have revealed hardware conflicts since the software interacts different with the hardware for some features. This would be the worst case scenario because I know that normally iPhone 4 devices if not the 8GB model will be out of warranty. For me this is just a small issue since my warranty is still one year :(
I have contacted apple care for this issue and have get the info that it will be escalated to the engineering team, for further investigation. As I know there was also an issue with some proximity sensors at the beginning if the iPhone 4 models and I think there was an software fix for a lot of them. Hope for the best!!!
I have also done a lot of Troubleshooting, reseted settings, content and settings, restored in dfu and recovery mode, restored with new .ipsw (iPhone OS), restored on different pc (so even this step gas downloaded a totally new .ipsw file), first on a Mac!
Next step wis that I will let the battery drain low entirely, a Troubleshooting idea of an friend. This might empower the entire hardware for a restart. I am not really believing in this step but I will give it a try :)

AUto attendant not working

Auto attendant not working .....
If i assign AA script Transfer_v02.aef then i hear an just 1-2 seconds the script after that again it is just ringing ...
Is there Option to set
Please press the extension which you want to Call ...
Eg: if i press 222 that time it should ring the 222 extension
Please help this is the first time i am working on this stuff
If i chnage the scrpt file then i can hear auto attendant not initiazlised.. please find the attched screen shot and back file for more details.
Best Regards
Shabeel

Hi KMS, check the codec used between that GW using the FXO and the CTI RP.
Check also the Calling Seach Space
GW should be able to reach CTI Route Point and CTI ports partition.
If you try other extension it works fine?

Auto keyframe and auto transition not working

auto keyframe and auto transition not working and I have a creative cloud, in addition the auto keyframe works in the getting startel lessons....

In order to use these you need to have the autokey frame and transition selected
OFF ON
and have the first key checked then move the playhead to the new position and it should add the transition.
Did you try this and it is not working?.

Auto dial not working

Auto dial not working
I'm using an iPad 4, with WiFi and Cellular and iOS 8.1.3
In the past if I was searching for a hotel and found one I only had to tap on the phone number and it would dial using either Skype or MagicJack. It worked using Wi-Fi or my data plan. It was an absolutely valuable function especially when traveling.
Now, when I click on a phone number, it says that it's going to exit the program (like Safari) and start a new program. When I click, Ok, nothing happens.
I must have inadvertently changed some setting.
Skype works, MagicJack works, but I must dial the number manually.
I have tried turning "Handoff" off and on then rebooting, turning FaceTime off and on and rebooting (and every combination of those two programs and actions).
To say the least, I am frustrated because it must be something obvious. (to everyone else!)
Any ideas as to how to how I can get it to dial automatically again?
Thanks for any assistance.

IPAD user guide for IOS 8 is available on line at apple -
you can download it in IBOOK or PDF format to refer to when you can't get connected to see it on-line
http://support.apple.com/manuals
Handoff is only for using with multiple devices - Iphone/Ipad/ipod
This is the bit in Handoff on Phone calls
Phone calls
If your iPhone (with iOS 8) is nearby, you can make and receive phone calls on your other iOS devices and Mac computers. All devices must be on the same Wi-Fi network, and signed into FaceTime and iCloud using the same Apple ID.
Make a phone call on iPad. Tap a phone number in Contacts, Calendar, or Safari. You can also tap a recent contact in the multitasking screen.
Disable iPhone Cellular Calls. On your iPhone, go to Settings > FaceTime, then turn off iPhone Cellular Calls.
You may have to use Face Time to make calls from the IPAD -- there are page or 2 on that --

Auto brightness not working on iPhone 5?

On the iPhone 5 - In the settings, when flicking the auto brightness on/off the screen shows no change in brightness - whether in a completely dark room or with the lights on etc. My iPhone 4 has been updated to IOS6 and seems to be working normally (brightness auto adjusts in all situations).
Anyone else have this problem of the auto brightness not working?

There is nothing wrong with the auto brightness.
When you have auto brightness enabled the slider works as the minimum brightness setting with auto brightness.
If you have the slider too high the brightness cant reduce because youre not letting it.
Set your brightness at about 25% and you'll see what I mean.

Office 2013 Auto Archiving not working

Dear Sir / Madam,
We are using MS OFFICE 2013 with Windows 8.
Problem we face is Auto Archiving not working at all. We have defined all the parameters, still it is not working. We are using Exchange Server and all the emails are Archived to local PST files after a defined time period.
We have defined all the steps required to do Auto Archiving.
Your help is required in this since we have tried all the options.
Paloli Manoj

Hi,
What's the size or your archive.pst file? Please first make sure it's not getting close to 50 GB limit.
If the size far below 50 GB, please try to use the Inbox Repair tool to scan and repair the archive.pst file. If the file is corrupt, the autoarchive will not happen.
http://office.microsoft.com/en-in/outlook-help/repair-outlook-data-files-pst-and-ost-HA102749454.aspx?CTT=1
For more troubleshooting steps, please refer to this:
http://www.howto-outlook.com/faq/archivenotworking.htm
Regards,
Steve Fan
TechNet Community Support

Yoga 2 Pro tent mode and auto-rotate not working

I have had a Yoga 2 Pro since June. Recently the Tent mode and auto-rotate features do not work.
When I put the Yoga 2 Pro into Tent mode the keyboard and touch pad are still active underneth. However, they shutoff when in tablet mode. Lenovo Transition starts automatically and is running.
Auto-rotate does not work at all now. The screen is un-locked.

Dear NX3
Welcome to Lenovo forums
Please try to uninstal the Lenovo transition program and download the version in the below link and instal it
http://support.lenovo.com/us/en/downloads/ds038767
Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Auto resolve not working for cached outlook

We recently migrated from Exchange 2007 to 2010. One thing we have noticed is that auto resolve (to alias name) is not working for Outlook in cached mode. Not in cached mode or via owa, it seems to work fine.

Hi,
Does the issue happen to all users or some specific users?
Please check whether the issue happens in Outlook Online mode. If the issue only happens in Cached mode but not in Outlook Online mode, please create a new Outlook profile to have a try.
If it doesn't work, please restart Microsoft Exchange File Distribution service in Exchange 2010 and Exchange 2007 then click Send/Receive > Send/Receive groups > Download Address Book to have a try.
Regards,
Winnie Liang
TechNet Community Support

Auto Select not working in Photoshop CS6--Why?

I'm experiencing the auto-select in Photoshop CS6 not working when it is checked and I click on different layers. It worked fine in 5.5, but I am now using PS CS6 cloud and it works only sporadically. Any reason why?
Thanks in advance!
-Jane

Moving this discussion to photoshop Forum discussion.

Auto Blend not working in PS CC 2014!

Auto blend is not working in the latest edition of photoshop! how do I revert to the previous version? it dose not appear in the app section I am on a 30 day trail,
If I pay for the program on the cloud then will it allow me to revert?

Looks like you are facing the issue mentioned in the below article.
Auto-Blend Layer masks are all black or all white
If so, revert back to PS CC as of now.
Here is the process, Creative Cloud Help | Install, update, or uninstall apps
~ Arpit

Auto Calculate not working in Locked Title.

I am in the process of upgrading from AW 5.0.4 to AW 6.2.9
Just as a matter of interest and also it may help some who suffer the "Autocalc on strike" bug.
I ran into the "Autocalc on strike" bug in two large spreadsheets when they were saved as AW 6. I use these spreadsheets continually from year to year to keep annual track of my business so they are important to me.
All of the many calculations and references updated automatically as data was entered, except those that were placed in the "Locked Title". These needed the manual "Calculate Now" command to force them to respond.
I tried the "save in AW 5 and save back into AW 6" trick but this did not work.
The solution that fixed both spreadsheets was to:
Quit AW 6
Open copies of the original AW 5 spreadsheets in AW 5.
Go to "Options" menu and uncheck "Lock Title position"
Save
Quit AW 5
Open and save the spreadsheets in AW 6 again.
The title can be locked again if desired.
Wonderful.... now I have my precious spreadsheets and database working perfectly in AW 6 and access to my many files produced over the last eight years, here's to another ten years of using Appleworks.

Looks like you are facing the issue mentioned in the below article.
Auto-Blend Layer masks are all black or all white
If so, revert back to PS CC as of now.
Here is the process, Creative Cloud Help | Install, update, or uninstall apps
~ Arpit

Auto brightness not working in iOS 5.0.1

Auto brightness on iPad 1 not working properly? Well known bug? Battery level is also terrible.
Any ideas?

The same problem on my ipad2 in ios 5.0.1
1. with smart cover
   - set autobrightness on and bright level half , no password
   - close smart cover and open cover
   - ipad2 screen is very dark and does not change until power off & on
2. No smart cover
- does not change bright in any places(dark room, sunlight, living room etc)
But no battery problem on my ipad2

Windows Server 2008 R2 DNS Entry Auto remove not working

Dear All,
I have configured DNS Ageing for 30 days removal of unwanted host entry.but it will not work.
Active directory DNS having all unwanted host in forward lookup zone and as well as reverse lookup zone.
how to solve this ?
pls help
Sunil
SUNIL PATEL SYSTEM ADMINISTRATOR

Hi,
This is a rather common problem when configuring Scavenging and Aging of stale DNS entries. This has to be set in two spots, not just one as so many admins have difficulties with. It isn't very obvious.
Aging and Scavenging must be set on both the DNS Server and on the Zone
that you want to clean. In addition, DNS needs to be Active Directory integrated and resource records need to be dynamically registered. Static entries are ignorned.
First step:
To set aging and scavenging properties for the DNS Zones using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Set Aging/Scavenging for all zones.
Select the Scavenge stale resource records check box.
Modify other aging and scavenging properties as needed.
Second Step:
To set aging and scavenging properties for the DNS Server using the Windows interface
Open DNS Manager.
In the console tree, right-click the applicable DNS server, and then click
Properties.
Select the Advanced tab,and then enable Enable automatic scavenging of stale records
check box. Once done, specify the Scavenging period (That is recurring
interval for Scavenging on a DNS server) and click on OK
That will do it. Your DNS entries will then start auto scavenging based on the times you have determined. Word of caution - do not set your aging too aggressively - I have seen where an admin had set aging down to 1 day and when it finally kicked
off, nearly brought the company to a halt.

Magnetic lasso and auto sharpen not working correctly

anyone having this problem with PSE 3.0

Which operating system are you using?
What is not working with the Magnetic Lasso Tool and Auto Sharpen?
Have you tried resetting the photoshop elements 3 preferences?
To reset the preferences:
Press and hold the Shift+Alt+Ctrl (windows) or Shift+Option+Command (mac) keys just after starting the launch of the pse 3 editor.
Keep holding the keys down until you get a dialog asking if you want to delete the photoshop elements settings file
Press Yes to reset the preferences.

HT5271 auto fill not working correctly

Auto fill is not working correctly. How can this be fixed?

Leopard 10.6.8 is Snow Leopard.
Do this please ...
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.
What version does it say?
10.6 10.5 ??

Margin 0 auto is not working in IE

Similar Messages

Maybe you are looking for