Margins in P6 R8.3

I am trying to print the activity network of my project on a 11x17 size paper so that I can get all the activities on one page. I am unable to change the left margin to anything smaller than 3.17", which is wasting half the space on my paper and pushing my project onto 2 pages. Why can't I change the margin? Is there any way to fix this?

Hi,
Right now am working on Primavera 8.3 on windows 2008 server
Regards
Kumar

Similar Messages

Is there a way to make all page margins the same?

I've exported a book file from indesign. Since the pages were in a book-type spread, the odd and even pages have different margins. The odd page has the bigger margin on the left, while the even has the bigger margin on the right. Is there any way to make these identical after the fact. I can't go back and redo the indesign file.

Thanks, there are 382 pages. Can't do them one by one. And I purposely made the margins different in indesign, to give people more space in the middle. The margins are as follows:
But when I try to reverse the inside outside on one page of the spread, just reverse them, so the dimensions are the SAME, all the text and photos move.

Data from a view in the margin

Hi,
I have a view which shows the data for the margin correctly.
It is a group above report which results in several pages.
On page 1 the footer should be in swedish (a reminder to a swedish customer) and on page 2 the footer should be in english (a reminder to an english customer).
The data in the margin does not get switched then the data is different. Meaning that the footer on page 2 still is on swedish desipte of that the data in the view for that page is correct (english).
The footer is placed in a repeating frame, that has source group = the outermost repeating frame.
Thanks in advance for any help.
//Brgds Sabina

Hi,
this is a maintenance view
so you cannot write the select query
but you can write the select query on TTDS
TTDST tables
as these are the two tables involved in this
this is the condition maintained to get this view
TTDS     MANDT     =     TTDST     MANDT
TTDS     TPLST     =     TTDST     TPLST
select a~field
          b~field1
from ttds as a inner join
ttdst as b on atplst = btplst
into table itab
where conditions
then it will work
regards,
Venkatesh

|Pages 5| Keep Comments Displayed in Margins?

When I write comments on a document they are now only shown when I mouse-over them. I would like them to constantly be displayed in the margins. Is there still a way to do this?
-Neil

No. I gather you are running Pages 5 on OSX 10.9 not !0.4.10.
Pages 5 has over 90 other features removed:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=b14426a2c5af2 65f2213d98ee45f08d7&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Export your Pages 5 files to Pages '09 or Word .docx and trash/archive Pages 5.
Then rate/review Pages 5 in the App Store.
Peter

The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?) If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my doc

The HUD Inspector in Full Screen View seems to position at the right margin of the image as a default(?) If I toggle the button in the top right of the HUD it 'unlocks' and I can drag it to where I prefer -- at the left margin; (for over a decade) my dock has resided at the right margin so all my slider manipulation over countless editing sessions in Aperture has been ingrained to work at the left margin -- but, the vast majority of the time, the HUD overlaps the image I am editing in this 'unlocked' mode.
Every occasionally I enter Full Screen View and it positions on the left margin *without* superimposition...(!) My great joy is modulated into aggravation, however, should my tracking cursor drift all the way 'out of bounds' -- to call in the hidden pane of adjacent images sequenced in the library... This dramatically shrinks the Full Screen display and re-locks the HUD; if I toggle the switch to re-xpand the image it re-positions at the right margin!!!! I SOOoooooo wish I knew how to control the default 'locked' margin of the HUD in Full Screen View...

Drag it over to the Left. Then lock it there.

IMovie text has unexplained wide right margins

Hi and thanks for taking a look
I am making a movie that is subtitled. For awhile I had no problem copy/pasting the subtitles into iMovie's text field, but recently when I copy/paste from MS Word: Mac 2008 12.0.0 I encounter wide right margins that won't go away. It looks extremely unprofessional to have my text clumped to one side.
I have already tried: changing the markup and the final/original markup options; reducing the document's right margin; copy/pasting the entire document into Text Edit and then extracting text from there. Nothing has worked.
Your suggestions are greatly appreciated - the project is due tomorrow!

Bijaz wrote:
... when I copy/paste from MS Word: Mac .. I encounter ..
give this a try:
• in MSWord, save your document not as an 'MS Word'.doc, but as an RTF (under Options) - in MSW this will perhaps doesn't change the appearance of your document ..
• copy/paste from THAT document..
MSW sometimes add some 'unknow' bits&bytes, which makes other apps stumble...
and Welcome, Bijaz, to the  iMovie boards

Unable to change margins in Pages 5.2

Hello - I am drafting a resume using one of the Pages templates. I would like to change the right margin so that there is more room for text (less white space on the right side), but am unable to do so. The ruler slide will move to make the margin WIDER, but not NARROWER, which is what I want. I have tried:
1. "unlocking" the document via the Arrange menu (not an option);
2. changing the document margins via the Inspector/Document menu - right margin is already set to zero, but the space on the actual document is a couple inches wide;
3. changing the column width via the Format/Layout menu - each time I try to do this, the width immediately reverts to what it was prior to my changing it.
This is maddening. As much as I love Mac, I feel Pages is not very user friendly, and that's coming from someone with and advanced education who is fairly computer literate. If possible, I would prefer not to have to make a whole new document. Help? Thanks.

PeterBreis0807- Sorry for the MUCH delayed reply. Family matters required me to relegate this to the back burner. I'm back in the resume game again and still have this issue. Below is the screen shot showing the wide right margin I'd like to change. Any thoughts? Thank you!

IPC Pricing routine for Product Family Margin in Quotation is not working

Hi,
I am working on the IPC Pricing Routine to calculate Item's Product Family Margin in the Quotation.
Process followed:
Step 1: Created a Group condition ZPFM for Product Family Margin and assigned to the pricing procedure.
Step 2: Created a Value Routine to determine ZPFM's Condition Rate and Condition Value.
Logic:
          1. Collect (Sum Of) the Cost (ZSVC) and the Subtotal 3 of the items which are in same Material Group.
           2. Assign the ZPFM Condition Value = Sum of Subtotal 3 - Cost.
Issue: The condition value for ZPFM is calculating correct for all line items except the last item. I am getting some junk value always to the last item. If I delete the last time, again next last item is giving wrong value. The calculation value in the routine debugging log (SM53) is showing correct value. However, assigning the wrong value. No other routines have been assigned to this condition type in the pricing procedure.
Routine Code:
package stanley.pricing.userexits.val;
import java.math.BigDecimal;
import com.sap.spe.pricing.customizing.PricingCustomizingConstants;
import com.sap.spe.pricing.transactiondata.PricingTransactiondataConstants;
import com.sap.spe.pricing.transactiondata.userexit.IPricingConditionUserExit;
import com.sap.spe.pricing.transactiondata.userexit.IPricingItemUserExit;
import com.sap.spe.base.logging.UserexitLogger;
import com.sap.spe.pricing.transactiondata.userexit.ValueFormulaAdapter;
//import com.sap.spe.pricing.transactiondata.userexit.IPricingCondition;
public class Z_CondValueRoutine730 extends ValueFormulaAdapter{
   private static UserexitLogger uelogger =
          new UserexitLogger(Z_CondValueRoutine730.class);
public BigDecimal overwriteConditionValue(IPricingItemUserExit pricingItem,
         IPricingConditionUserExit pricingCondition) {
// Variable Declarations.
BigDecimal conditionValueZCVC=PricingTransactiondataConstants.ZERO;
BigDecimal conditionValueZCVCAccrual=PricingTransactiondataConstants.ZERO;
BigDecimal subTotal3=PricingTransactiondataConstants.ZERO;
BigDecimal subTotal3Accrual=PricingTransactiondataConstants.ZERO;
if(pricingCondition.getConditionTypeName().equalsIgnoreCase("ZPFM")){
            IPricingItemUserExit[] prItems;
            prItems = pricingItem.getUserExitDocument().getUserExitItems();
            String materialGroup = pricingItem.getAttributeValue("MATL_GRP");
            uelogger.writeLogDebug(" Material Group :"+materialGroup);
            for (int i=0;i<prItems.length;i++){
                 String materialGroup1 = prItems[i].getAttributeValue("MATL_GRP");
                 if (materialGroup1.equalsIgnoreCase(materialGroup)){
                      subTotal3 = prItems[i].getSubtotal(PricingCustomizingConstants.ConditionSubtotal.SUBTOTAL_3).getValue();
                      subTotal3Accrual = subTotal3Accrual.add(subTotal3);
                      IPricingConditionUserExit[] conditionsForCumulation = prItems[i].getUserExitConditions();
                      for (int j = 0; j < conditionsForCumulation.length; j++) {
                           if(conditionsForCumulation[j].getConditionTypeName()==null) {
                               continue;
                           else if ( conditionsForCumulation[j].getConditionTypeName().equalsIgnoreCase("ZCVC")){
                                conditionValueZCVC = conditionsForCumulation[j].getConditionValue().getValue();
                                conditionValueZCVCAccrual = conditionValueZCVCAccrual.add(conditionValueZCVC);
            BigDecimal conditionValueZPFM=PricingTransactiondataConstants.ZERO;
            conditionValueZPFM = subTotal3Accrual.subtract(conditionValueZCVCAccrual);
           BigDecimal conditionRateZPFM=PricingTransactiondataConstants.ZERO;
           conditionRateZPFM = conditionValueZPFM.multiply(new BigDecimal ("100"));
          conditionRateZPFM = conditionRateZPFM.divide(subTotal3Accrual,7,BigDecimal.ROUND_FLOOR);
         uelogger.writeLogDebug(subTotal3Accrual+"-"+conditionValueZCVCAccrual+" = "+conditionValueZPFM);
         uelogger.writeLogDebug("Condition Rate :"+conditionRateZPFM);
       pricingCondition.setConditionRateValue(conditionRateZPFM.setScale(2,BigDecimal.ROUND_HALF_UP));
       pricingCondition.setConditionValue(conditionValueZPFM.setScale(2,BigDecimal.ROUND_HALF_UP));
          return null;
       return null;

Hi,
I think you should change xkwert variable instead of komv-kwert.
Standard routines does the same.
Aslo check in SPRO settings that routine is attached and
getting triggered by putting break-point.
Regards,
Vishal

BEx Formula Use of 'Logical And' and Calculation for Gross Margin

HI Bex gurus.
Having an odd time with what should be a simple formula to handle the display of gross margin (GM). The goal here is to display GM% properly and the requirement is as follows
If GM <= 0 then 0.0
Else
If GM > 0 and Sell > 0 then ( ( sell - cost /sell ) * 100 )
Else
If GM >0 and Sell = 0 then 100
I am familiar with bex formulas and have referenced the help docs on booleans here -
Boolean Operators - SAP Business Explorer - SAP Library
But what is odd is that if I use a calculation or a CFK in the IF, THEN with a LOGICAL AND, the formula does not report correctly
If I put in a static value, like 77, the expected logic is followed. I have tried making sure have extra parentheses and changing the order of the statement, to no avail! I could use some extra brains on this puzzling matter, so you help is greatly appreciated and will award points!
Thanks
lee lewis
Here are the formulas in text and below screen shots. Wish could copy and past formulas to and from editor!
GM%77
( ( ( 'Order GM' >0 ) AND ( Order Sell > 0 ) ) == 1) * 77 + ( ( ( 'Order GM'> 0 ) AND ( Order Sell == 0 ) ) == 1) * 100 + ('Order GM' <= 0) *0.0
GM%
( ( ( 'Order GM' >0 ) AND ( Order Sell > 0 ) ) == 1) * 'REF GM%' + ( ( ( 'Order GM' > 0 ) AND ( Order Sell == 0 ) ) == 1) * 100 + ('Order GM' <= 0) *0.0
'REF GM%
(order sell - order cost /order sell ) * 100 )
GM%77
GM%

Shouldn't you change on of the brackets in your REF GM% ?
'REF GM%
(order sell - order cost /order sell ) * 100 )
I would put that as
'REF GM%
(order sell - order cost) /order sell * 100 )
Not sure what you mean with those red arrows... but in both cases you would be dividing by 0 (order sell = 0).

Report for calculating gross margin

Hello Experts,
We need a report where we can find the gross margin .
We have wholesale and Retail where the items are set up in a way that the date goes to the same journal entry.How can we separate this and calculate the gross margin for different BP type .BP code for wholesale starts with "W" and for retail it starts "C".
Any help/suggestion is greatly appreciated.

Hi,
Have you tried Sales Analysis report by customer? You can select different groups of customer by BP code.
Thanks,
Gordon

How can I print a label on the last page of the report in the margin

I would like to display a label on my report but has to appear only on the last page of the report in the margin area or as a footer. I have tried using the solution below that I came across in this forum. This solution only worked if I put the label as a report trailer and not in the margin of the main section of report. The problem of putting the label as a report trailer is that it will only appear at the end of the report on it's own page, i.e. on a new page. I would like the label to appear at the end of the report, on the last page which has the other report details and not to appear on a new page on its own. Could you please help? Thanks.
1. Create a dummy query, like
select 1 dummy
from dual
2. Create a package spec:
PACKAGE pkg_globals IS
totalPages number(3);
END;
2. Create a repeating frame and field for this dummy at the end of the report layout.
3. Create a format trigger for this frame:
function R_1FormatTrigger return boolean is
begin
SRW.GET_PAGE_NUM(pkg_globals.totalPages);
return (FALSE);
end;
4. Create a format trigger for your margin field:
function F_1FormatTrigger return boolean is
pagenum number;
begin
srw.get_page_num(pagenum);
if pagenum = pkg_globals.totalPages then
return (TRUE);
else
return (false);
end if;
end;

user8655468 wrote:
I would like to display a label on my report but has to appear only on the last page of the report in the margin areaCreate a fixed frame at the bottom of margin area and inside the frame put your label.
set the frame print object on: Last page
Hope this works..

Printing from HTML rendered page assume bigger margins than defined on the report

Hello!
I have a report with PageSize and InteractiveSize of 29,7cm x 21cm and Margins of 2cm each.
Body of report is 25cm width.
When rendered in report server and then try to print it I get some blank pages because it changes print margins to 2,032cm each!
I tried other margin sets like 5cm, and it changes to 5,08cm.
If I set margins to 1,5cm it changes to 1,4986cm.
I tried to print to a different printer and does the same.
Does anyone knows why this happens and if I can control it?
Thanks in advance.
Carla Baptista

I'm running OS X 10.5.4 on a Mac Pro with 2 x 2.8 GHz Quad-Core Intel Xeon & 4 GB 800 MHz DDR2 FB-DIMM Memory (I installed the latest security update this past week).
I updated to ACR 4.5 (thru adobe tech help) after installing the security update. I've been using Epson driver 6.10- beta version for Mac OS X 10.5 for several months with no problems.
Seems to me that ACR 4.5 previews stated that some printing issues would be fixed with this upgrade, along with support for more cameras, and support for linking to CS3 from LR2.0.
It is possible that the security update affected printing from Adobe CS3. Several months ago there were serious problems printing from Aperture & Lightroom that were "fixed" with an OS X security update. Some of those problems were printing size & orientation problems, as well as incorrect color. I checked printing after this latest security update, but not with custom sizes.
I guess I'll have to do some further investigating to determine what exactly is causing the current problem & find a workaround. I'm not a computer expert - I'm a photographer. And I'm getting weary of having to find fixes for things that should have been handled by the development staff for the various software products that I'm using - plus, it gets expensive when paper and ink are wasted - very expensive when printing to large custom sized paper. And very bothersome when you cannot depend on what you see in the preview window as to print size nor orientation.
Anybody else out there with similar problem with the latest upgrades?

How to add sales margin umsmao as key figure in xxl_data structure in mcge?

Hi,
While downloading list in mcge to xxl, I am not able to download sales margin UMSMAO.
It's saying "Selected key figure UMSMAO not contained in XXL
output structure".
How do I do this?
Thanks in advance,

Hi Joseph;
Yes, you can add a KF as one attribute of master data.
The other solution that I see is you create a DSO as a target of 2LIS_03_BF and then a transformation with company code. Direct link between DS and IO is not advise because one is delta and the other is full (you could have some problems).
But if it's my choice... enhance the 0COMP_CODE_ATTR.
Regards;
Ricardo

Margin Issue(pdf) in migrating 6i report to 10g

Hi,
After I migrated the report from 6i to 10g, I found the report printing issue comes out. Every report printing is not same as 6i, move the data to left and top about half cm. I searched this forum, I got clue was i can add reports_add_hwmargin into registry, then I can add printer margin into the report. I found it works when i run the reprot from 10g builder. But when I generated it into pdf format through IDS then print out, the problem is still there. How can add printer margin into report with pdf format?
My environment is
app server 10g
report 10g,
windows xp
Thanks in advance.
appcat

Try a Compile All ( Ctrl - K ), then Ctrl - T.
Not sure about XP, but in Vista, the 10g Builder and batch compiler will crash if a PLL Library is not available when the form is compiled.
Make sure the PLL Library is available, and all its objects compile in the 10g setup.
If that does not help, then try a semicolon-to-semicolon replace all, then save the fmb. Then restart the Forms Builder, and open the fmb again, and try compiling.
Here is an old link describing the issue:
Re: FMB size shrinks dramatically

10g reports in html format have extra left margin

I am using the same source .jsp file to create 2 html reports, one using 9i server and the other using 10g server. The report run on the 10g server has a double left margin compared with the report layout and the report run on 9i. When 10g report is printed it chops off the right side of the report. This only affects html output, rtf and pdf work fine.
Is there any setting I can change in the report properties to stop this from happening?
Thank You.

I am running through a servlet with the URL http://our_server:7779/reports/rwservlet?server=reports_saints&report=...&destype=file&desformat=html...
Thanks

Crystal report - margins problem

I have a problem with top and bottom margins in my report. In the designer view - File>Page Setup - I have the paper size (A4 210X297 cm). Both the top and bottom margins are set to 2 cm which, If I understand it correctly, printing should start exactly 2 cm from the top and end at 2 cm from the bottom of a page.
However, no matter what I do, it starts printing 1.5 cm from the top and ends at 3 cm from the bottom of a page.
I have the 'Dissociate Formatting page size and printer paper size turned off so that should not influence anything and even if it's turned on makes no difference.
In Designer view when I look at the ruler the Report Header - it is exactly 25.5 cm in length. For some reason unknown to me I can't make it any longer. If I add even 1 or 2 mm to the length, the printing spills over to a new page.
I'm printer to a HP laser printer - nothing fancy - other programs like Word prints to the same printer with no margin issues whatsoever.
I will appreciate it so much if someone can point me in the right direction, please.
Regards
Danie

Hi Danie,
the problem is not inside CR, not your printer, but how SBO print engine handles paper sizeing and margin. (for just one simple thing: set the margin inside SBO, and you'll notice nothing changes).
This is especially problematic with CR margins.
On load the print engine gets the paper sizes from windows, and sticks to them. In my experience, it handles the margins as CR:
fixed 2cm-s of any paper size ( this was my main problem, imagine it: printing on a 4,5*3,5 label, with 2cm margins =S, every other application did it right, from CR it was right, from CR to PDF to print it was right, from SBO PLD it was right, from SBO>CR>PDF>Print it was right, but no matter what i did, the SBO>CR>Print was using wrong margins).
Try dissociating the papersize in CR and setting custom sizes/margins, sometimes, after many trial and error that works.
I had made to date ~10 special sized/print scenario solution in CR (along many other standard sized reports), sometimes the above stated can achieved, but mostly i just add a corrected paper size to windows, set it as default and the ~100 trial and error falls back to ~15 rounds..
I'm sorry to hear your disappointed in CR, sometimes i'm also feel like that, and i completely agree that it is overrated, but i think it is a great solution for things. It's not a miracle tool, but it handles well in most default situation, and you can construct insanely complex reports with relative ease (if you lear how to utilize SQL inside CR along with Crystalsyntax). But i agree, handling papersizes it is.. well.. you know.
Lets hope will get the neat 2011 version someday to SBO..
Regards,
Daniel

Margins in P6 R8.3

Similar Messages

Maybe you are looking for