Margins on print copies from HP Officejet Pro 8600 Printer are not aligned with original document

My HP Office ject Pro 8600 Printer is not printing the same margins as my original document.  The left margin on the print copy is 3/4" too far to the right.  The margin on the right is too far right and the text is being printed off the page! The problem seemed to start when I loaded Avery Labels to print. I run a non-profit and need to make copies asap for a sponsorship letter for a fundraising event.

Hi lbaker67, 
Have you tried doing the firmware update for the printer? The firmware update
Fix/Enhancements are as follows.
1) Enhance ePrint Diagnostic report for ePrint Setup
2) Improve ease of wireless setup
3) Enhanced Embedded Web Services
4) Improve Print Quality
5) Improve Ink Usage
6) Improve paper path performance
7) Improve Digital scan performance
To check the version of your current printer firmware:
Printer Information Screen
1. From the Control panel, press Help (?) button, select Printer Information
2. Use the down arrow button to scroll to the 2nd screen
3. The current firmware revision will appear on the screen
If you do not have Version CLP1CN1322CR you need the update.
HP Officejet Pro 8600 Firmware
This update may resolve the issue. If you require further assistance please post back and I will follow up with you.

Similar Messages

  • After installing latest OS update I can no longer print from my iPad to my HP Officejet Pro 8600 printer.  Any suggestions?

    After installing latest OS 5.1 update I can no longer print to my HP Officejet Pro 8600 printer?   Suggestions?

    Installing the new os may have tricked one of the three devices involved.  If it used to work, it will again.
    Reboot the printer.   Reboot the router.  On the pad, general, reset, reset network connections. 
    Make sure all the devices are on the same wifi network.   Talk nice to it.

  • HP Officejet Pro 8600 Plus will not print from my MacAir

    I have used my MacAir to print on my HP Officejet Pro 8600 Plus for about 5 months without any problems.  All of a sudden my printer will not print.  The wireless icon says it's connected to the network.  But when I click print it says "looking for air printer" and then "printer not connected".  I've repeated the Wizard Set Up for the wireless connection.  I've turned the printer and computer on and off.  I've even tried printing from my iPhone but it will not find the printer anymore.  Please help!

    Hello @ladybonds ,
    Thank you for taking the time to post on the HP Forums today! Hope you enjoy the experience.
    You are saying that you have been printing fine from your computer for 5 months and now your printer says it is connected to the network and your computer says that it isn't.
    Have you recently upgraded to Yosemite the new Apple OS? If not what OS X are you using?
    Are you sure that the printer and your devices are on the same network?
    Does the router give your printer an I.P address?
    Let me know these answers and we can go from there.
    I worked for HP.

  • Directions on setting up to print on a HP officejet pro 8600 plus from a samsung notebook

    At a new job and looking for directions on setting up to print on a HP officejet pro 8600 plus from a samsung notebook.
    Can you please help me?

    Hello JoeA12345
    Welcome to the HP Forums.
    I see that you looking for some assistance with setting up the printer on your new notebook.
    So I can better assist you, please respond with which Operating System you are running:
    Which Windows Operating System am I running?
    Write me back when you have time and I will be happy to help.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP Officejet Pro 8600 Printer - help for office environment/wireless network

    I'm an HP person (i.e., laptob, printer, etc.).  Our office had a Brothers (sorry) MFC 9840 and with it we had a desktop app that would allow us to scan, copy and fax from our personal computers.  Needless to say that printer died and I bought the office an HP Officejet Pro 8600 printer. Because the aforementioned capabilities existed, the staff would like them for our new HP printer. I didn't see these capabillities on the support disk.  Did I miss it?  Can you help.  Thanks (because I can not believe the HP would put out such great products without this capability).

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Change sided printer back to default single sided printing on hp Officejet Pro 8600 printer

    How to change 2-sided printer back to default single sided printing on hp Officejet Pro 8600 printer.

    Hi @rdwill13 
    You can change the default back to single sided in the preferences. I can help you with this. What operating system and version do you have? Mac or Windows?
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

    I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
    It says:
    "There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable" 
    I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
    HP Officejet Pro 8600+
    Product Number CM750A
    Serial Number {Content Removed}
    Not under warranty
    Please advise.
    This question was solved.
    View Solution.

    Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
    http://goo.gl/BXDFf
    It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
    **Click the KUDOS star on the left to say 'Thanks'**
    Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

  • OfficeJet Pro 8600 plus will not install , msg Call to DriverPackageInstall returns error 5

    I get message "Call to Driver Package Install returned error 5 for package -c\Program Files\HP\HP OfficeJet Pro 8600\Drivers Store\Pipeline\hpup\03.inf-Call to Driver Package Install must be a member of th eadministrator group to install a driver package. Laptop is HP, Core 5, running Win 8.1
    No security messages arose during very slow install.
    Tried several times, tried to download installation package as suggested btroubleshooter but aborted 4 times (4 hours), other downloads had no problem. Tried changing startup as indicated also, did not correct the problem.

    Hi Liam,
    The installation CD that came with your 8600 will definitely not work with Windows 8.1 and is not same as the latest online download which you will need to install on Win8.1.
    Are you running Win8.1 Pro 32 or 64 bit?
    Also make sure you select the right model of your Officejet. There are 3 different models.
    HP Officejet Pro 8600 Plus e-All-in-One Printer series - N911
     HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g
    HP Officejet Pro 8600 e-All-in-One Printer series - N911
     HP Officejet Pro 8600 e-All-in-One Printer - N911a
    HP Officejet Pro 8600 Premium e-All-in-One Printer series - N911
     HP Officejet Pro 8600 Premium e-All-in-One - N911n
    Try uninstalling printer from the control panel and reinstall using the Win8.1 download from the link above.
    Thanks

  • HP Officejet Pro 8600 print with depleted cartridges

    The HP Officejet Pro 8600 User Guide says: 
    "The printer can operate with one or more depleted cartridges. However, printing with depleted cartridges slows the printer and affects the quality of printed documents. If the black cartridge is depleted, blacks are not as dark. If a color cartridge is depleted, output is in grayscale. When possible, replace the depleted cartridge. Do not remove the depleted cartridge until you have a new ink cartridge available to replace. "
    But the printer does not print with an depleted yellow cartridges. Do I have to change some settings? Or how can I make the printer print my document without replaceing the yellow cartridges? 

    Bob_Headrick wrote:
    McKnitter wrote:
    I am annoyed. There is nothing on page 91 of my manual to indicate that there needs to be ink in all cartridges.  I can understand now why it won't print when one is empty, but one of the reasons I bought this printer is because it is supposed to print black only when up to 2 cartridges are depleted. My manual (page 90) says:
    "The printer can operate with one or more depleted cartridges. However, printing with
    depleted cartridges slows the printer and affects the quality of printed documents. If the
    black cartridge is depleted, blacks are not as dark. If a color cartridge is depleted,
    output is in grayscale. When possible, replace the depleted cartridge. Do not remove
    the depleted cartridge until you have a new ink cartridge available to replace. "
    [snip]
    What exactly is your printer model? The verbage of the above is that for an IPH printer (with a black and a tri-color cartridge or perhaps a black, tri-color and photo cartridge), it does not apply to printers with separate ink supplies and printheads.  Can you give a link to the manual online, or scan the page and post it here for your printer?  
    I can find several manuals online but not the one that I have and I don'tknow how to upload anything here. I have copied and pasted the relevant information from "my" manual, which has a black cover, says Officejet Pro in green, and says 8600 User Guide in white. I can see the other information in other manuals which explains about printing with LOW ink but not with NO ink. If you can tell me how to upload "my" manual, I'd be happy to do so. Meanwhile, here's what I've copied and pasted, and thanks for your interest.
    HP Officejet Pro 8600 e-All-
    in-One series
    User Guide
    Copyright information
    © 2011 Copyright Hewlett-Packard
    Development Company, L.P.
    Print with one or more depleted cartridges
    The printer can operate with one or more depleted cartridges. However, printing with
    depleted cartridges slows the printer and affects the quality of printed documents. If the
    black cartridge is depleted, blacks are not as dark. If a color cartridge is depleted,
    output is in grayscale. When possible, replace the depleted cartridge. Do not remove
    the depleted cartridge until you have a new ink cartridge available to replace. For
    information about how to install new cartridges, see Replace the ink cartridges.
    CAUTION: Wait until you have a new ink cartridge available before removing the
    old ink cartridge. Do not leave the ink cartridge outside of the printer for an
    extended period of time. This can result in damage to both the printer and the ink
    cartridge.
    [page] 90 Work with ink cartridges

  • Officejet pro 8600 paper will not feed , Starts to feed and then jams before getting to printer head

    officejet pro 8600. Has been flawless for 2 years. Now it start to feed the paper, but jams as the paper goes around to the printer. It seems like the paper goes straight up instead of curving aroun to the printer head.

    Hello @ceebrick , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are running into paper jams.  I would love to help.
    I would recommend performing a power reset on the printer.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I would then recommend this document on A 'Paper Jam' Message Displays on the Printer.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Officejet Pro 8600 Plus will not print but is connected and says that the print job is 100% Complete

    Hi All,
    I'm printing from a MacBook Pro using OSX Lion. It says that Officejet Pro 8600 Plus is connected and that the print jop is 
    100% complete except that nothing comes out of the printer. I've done all of the test prints and they've printed just fine.
    I tired all of the troubleshooting steps listed on the support guide and still nothing. HELP!

    Not a reply but another plea for help.
    There seem to be so many people with wireless problems that a) it seems silly to start a new thread and b) which one to enter my own plea.
    -Printer bought about 2~3 weeks into Sept 2012
    -Installed onto Macbook Pro running Lion (full updated at that time)
    -Both wireless scanning from printer to computer and initiated from computer worked fine.
    -Printer, with full choice of duplex, layout etc, worked fine. (Even left 5star feedback somewhere!)
    -Set up eprint. That OK, too. Fine from iPad2 and SE Arc S printing photos.
    -Somewhere along the line it stopped communicating with my MBP
    -Out of interest, since there seemed to be no problems with an Acer laptop running Vista, I booted the MBP from an external drive on which I'd done a backup of my 10.6 system iMac (>300Km away: can't try that). Installed HP software from disc. Seemed fully functional. Odd. Very odd.
    -Restarting with Lion on MBP, tried again. Looks as if it might work, but loses connectivity. Tried manual address on printer.
    -Booting from 10.6 system again, reinstalled Lion on MBP (wondering if conflict between HP and Apple updates)
    -Reinstalled HP software from disc.
    Still didn't work.
    -Brought Lion up to date. Downloaded most recent dmg file from HP. Looked for updates. Have applied firmware update to printer
    8600 doesn't list my MBP as available computer to scan to
    [But all the test pages done whilst in HP Utility, and others, get sent through]
    Am getting rather fed-up with all this; never, ever before have I had so much printer problem.
    There seem to be a number of Lion users out there with the same problem. So far -but very infrequently tried- other machines/systems seem OK, therefore I am coming to the conclusion that it is an Apple<> HP conflict. If not sorted soon the printer will be returned as it is not fit for purpose. I'll revert to using my seldom problematic, non duplex A3 Brother.
    Hrumph
    Please help, someone! Either with a pointer to something I've not yet tried or by analysis and rapid availablity of updated software.
    Thanks,
    Mike W

  • Webscan problem with HP Officejet Pro 8600 printer and OS Mavericks

    I have an iMac with OS 10.9 Mavericks installed and an HP Officejet Pro 8600 Plus N911g printer.  I recently downloaded the "HP-Inkjet-SW-OSX-Mavericks_v12.34.37" software update from the HP website but, since installing it, the image preview feature on Webscan now only shows a black screen and I cannot download the scanned image.  I have uninstalled the update and reinstalled the old software  - "Officejet-Pro-8600_v12.23.0" but the problem persists.
    I am not sure if this is an HP problem or a Mavericks bug.  Any advice/help would be greatly appreciated

    The servicing when the printer is turned on is normal and is required to keep the printheads healthy (not clogged). See here for information.
    As for power savings, the printer will automatically go into a low power mode when not printing for some time.  It is not necessary to turn the product off and on to save power.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Cannot Print to Fax Using OfficeJet Pro 8600

    Issue: Cannot print to fax on HP OfficeJet Pro 8600 
    Setup: Running Mac Mavericks 10.9.4
    Steps Tried So Far: Installing updated driver available on support page. No firmware update needed. 
    What Happens:
    1) Document is open
    2) Select HP 8600 (Fax) from Print Menu
    3) Pop Up Box Shows:
    What I'm Asking For:
    Step-by-step guidance on to get computer to connect to fax.  Printing is working fine, as is scanning.  I am also able to fax directly from the printer iteself.  
    Thank you 

    Hello Ermagherd, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having issues with your print drivers.  I would like to help.
    Are you connected USB or wireless?
    I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
    Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
    I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps
    After the updates, I would recommend reinstalling the HP Officejet Pro 8600 series Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Image shifts every 1.125 inches printing photos on an OfficeJet Pro 8600

    On my OfficeJet Pro 8600 I notice that I have a line through images every 1.125 inches. Any ideas?
    I have already attempted to align the printhead.
    I am running Windows 7.
     HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g/N911h

    I should mention that this is when I print from Windows to HP photopaper (4" x 6")

  • Officejet pro 8600 printing

    I have had an 8600 for a year now - since last Thursday it has become really slow at printing.  When I click print, it can take two minutes before the printer takes the page - and if there is more than one page to print I can be waiting 10 minutes for a five page document to print.
    Can someone give me an idea? I've reset the printer after alighing printheads and cleaning printheads - it's a bit of a coincidence that this happened a year after getting it.

    Hi @hhs87, and @woodland36, 
    Welcome to the HP Forums!
    I noticed that your HP 7600 and 8600 printers are printing slowly. I am sorry to hear this but happy to help!
    Some questions, if you do not mind:
    How are your printers connected? Wireless, Ethernet, or USB?
    What Operating System are you using? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
    If you make a copy, Copying a Multipage Original, does it print at the same slow speed?
    In the meantime, please see the following:
    An 'Out of Paper' or 'Pick Motor Stalled' Message Displays for the HP Officejet Pro 8600 e-All-in-On.... (This guide, will help you clean the rollers etc.)
    Print Jobs from Your HP Printer are Stuck in the Print Queue. (Even though the guide title may not match your issue, I believe the solutions will help.)
    If you need further assistance with your 7600, please reply with your printer's Product/Model Number. To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number.
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Maybe you are looking for