Marine transportation

Dear all,
Is there any table about "marine transportation" in SAP?
Thanks regards

Yes possible , for Inbound and Outbound- Transportation module (available std with sap ). You can have shipment through road, water , air . every scenario could be mapped .
rewdzzz

Similar Messages

Table about Marine Transportation

Dear all,
Is there any table about "marine transportation" in SAP?
Thanks regards

Yes possible , for Inbound and Outbound- Transportation module (available std with sap ). You can have shipment through road, water , air . every scenario could be mapped .
rewdzzz

Recommendation on a good book on replenishment (DRP) using SAP SCM 5.0

Hi,
Appreciate that anyone can recommend a good, solid book on replenishment planning using SAP APO.
We don't find that SAP's documentation is helpful on replenishment planning of the global supply network, and it dos not seem to have a thoughtful design and well defined process. e.g. transport and shipment scheduling under the gATP documentation, which is clearly designed for sales order taking, and vaguely mentioned that the process can be apply for STR/STO. To me, it does not seem that author fully understand the entire supply chain planning process, from planning to execution in this regard. Another example, SAP documentation says that PP/DS heuristic can plan STR, but when you use it, then you realized that you really can not combine shipments and the planning process and execution are completely falling apart, as the scheduling dates, such like MAD, transport planning dates, pick/pack are not visible in APO nor integrated with planning process. out of sync with R/3. If using SNP, then we realized that the SNP heuristic is too simple to deal various different supply/demand situations, and have to adopt a completely different set of tools from production planning.
We have very tightly integrated global supply chain process for manufacturing, replenishment (DRP) and customer service. APO, having such sophisticated production planning functions, can not even handle such common marine transport planning well. We have both liquid and solid products with transport mode being marine, rail car, truck, barge etc. It is being a real challenge to plan our supply chain using APO.
Thank you in advance. Also appreciate anyone can share their experience.

Hi,
Check whether your Instance is up if not bring up the instance first. Try to logon to instance with DDIC user and reset the password to standard i.e 19920706.
Re-try the installation.
--Kishore

Inconsistent Results from Transport Rule to reset SCL

I have a client who has multiple sites. Their exchange server receives "scan to email" emails from a Canon C2020 Digital Multifunction on a different site. To stop the Exchange 2013 Spam filter blocking the emails, I set up a Transport Rule.
The rule has the following properties
If the Sender Address matches [email protected]
Set the SCL to 3
Generate an incident report and email to the system admin, and inlcude the original email
Is the 3rd of 3 rules (the prior 2 add Disclaimers to outgoing emails depending on who the sender is)
Simple enough right.
Wrong - some staff scan to email repeatedly and the scan arrives ok in their inbox. Others, it simply will not let the email thru, and instead places the email into the Spam Mailbox. I open the blocked email, click on Send Again and
it arrives for the user.
Is the Transport Rule functionality buggy or prone to odd behaviour. I have sat and read through the Rule so many times it is tattooed onto my retina.
The Email addresses for all users are created by an Email address policy so all are a consistent format = Firstname + Surname 1st Initial@contoso .com.
There have been times where I have wondered if the rules are case sensitive when assessing the email addresses.
Any thoughts to put me out of my misery, please show me where I have done wrong....
Get-TransportRule returns
[PS] C:\Windows\system32>Get-TransportRule "[Cust-sos-IN] Reset SCL on Scanner emails" | Format-List
RunspaceId                                   : 7f9c4f6e-7d35-409e-acf9-cbb272720b8c
Priority                                     : 2
DlpPolicy                                    :
DlpPolicyId                                  : 00000000-0000-0000-0000-000000000000
Comments                                     :
ManuallyModified                             : False
ActivationDate                               :
ExpiryDate                                   :
Description                                  : If the message:
Is sent to '[email protected]' or
'[email protected]' or
'[email protected]' or
'[email protected]' or
'[email protected]' or
'[email protected]' or
'[email protected]'or...
and Includes these patterns in the From address:
'[email protected]'
Take the following actions:
Set the spam confidence level (SCL) to '3'
and Send the incident report to [email protected], Include
original mail
RuleVersion                                  : 15.0.2.0
Conditions                                   : {SentTo, FromAddressMatches}
Exceptions                                   :
Actions                                      : {SetSCL, GenerateIncidentReport}
State                                        : Enabled
Mode                                         : Enforce
RuleSubType                                  : None
UseLegacyRegex                               : False
From                                         :
FromMemberOf                                 :
FromScope                                    :
SentTo                                       :
{[email protected],
[email protected],
[email protected],
[email protected],
[email protected],
[email protected],
[email protected],
[email protected], [email protected],
[email protected],
[email protected], [email protected],
[email protected],
[email protected], [email protected],
[email protected]...}
SentToMemberOf                               :
SentToScope                                  :
BetweenMemberOf1                             :
BetweenMemberOf2                             :
ManagerAddresses                             :
ManagerForEvaluatedUser                      :
SenderManagementRelationship                 :
ADComparisonAttribute                        :
ADComparisonOperator                         :
SenderADAttributeContainsWords               :
SenderADAttributeMatchesPatterns             :
RecipientADAttributeContainsWords            :
RecipientADAttributeMatchesPatterns          :
AnyOfToHeader                                :
AnyOfToHeaderMemberOf                        :
AnyOfCcHeader                                :
AnyOfCcHeaderMemberOf                        :
AnyOfToCcHeader                              :
AnyOfToCcHeaderMemberOf                      :
HasClassification                            :
HasNoClassification                          : False
SubjectContainsWords                         :
SubjectOrBodyContainsWords                   :
HeaderContainsMessageHeader                  :
HeaderContainsWords                          :
FromAddressContainsWords                     :
SubjectMatchesPatterns                       :
SubjectOrBodyMatchesPatterns                 :
HeaderMatchesMessageHeader                   :
HeaderMatchesPatterns                        :
FromAddressMatchesPatterns                   :
{[email protected]}
AttachmentNameMatchesPatterns                :
AttachmentExtensionMatchesWords              :
HasSenderOverride                            : False
MessageContainsDataClassifications           :
SenderIpRanges                               :
SCLOver                                      :
AttachmentSizeOver                           :
MessageSizeOver                              :
WithImportance                               :
MessageTypeMatches                           :
RecipientAddressContainsWords                :
RecipientAddressMatchesPatterns              :
SenderInRecipientList                        :
RecipientInSenderList                        :
AttachmentContainsWords                      :
AttachmentMatchesPatterns                    :
AttachmentIsUnsupported                      : False
AttachmentProcessingLimitExceeded            : False
AttachmentHasExecutableContent               : False
AnyOfRecipientAddressContainsWords           :
AnyOfRecipientAddressMatchesPatterns         :
ExceptIfFrom                                 :
ExceptIfFromMemberOf                         :
ExceptIfFromScope                            :
ExceptIfSentTo                               :
ExceptIfSentToMemberOf                       :
ExceptIfSentToScope                          :
ExceptIfBetweenMemberOf1                     :
ExceptIfBetweenMemberOf2                     :
ExceptIfManagerAddresses                     :
ExceptIfManagerForEvaluatedUser              :
ExceptIfSenderManagementRelationship         :
ExceptIfADComparisonAttribute                :
ExceptIfADComparisonOperator                 :
ExceptIfSenderADAttributeContainsWords       :
ExceptIfSenderADAttributeMatchesPatterns     :
ExceptIfRecipientADAttributeContainsWords    :
ExceptIfRecipientADAttributeMatchesPatterns :
ExceptIfAnyOfToHeader                        :
ExceptIfAnyOfToHeaderMemberOf                :
ExceptIfAnyOfCcHeader                        :
ExceptIfAnyOfCcHeaderMemberOf                :
ExceptIfAnyOfToCcHeader                      :
ExceptIfAnyOfToCcHeaderMemberOf              :
ExceptIfHasClassification                    :
ExceptIfHasNoClassification                  : False
ExceptIfSubjectContainsWords                 :
ExceptIfSubjectOrBodyContainsWords           :
ExceptIfHeaderContainsMessageHeader          :
ExceptIfHeaderContainsWords                  :
ExceptIfFromAddressContainsWords             :
ExceptIfSubjectMatchesPatterns               :
ExceptIfSubjectOrBodyMatchesPatterns         :
ExceptIfHeaderMatchesMessageHeader           :
ExceptIfHeaderMatchesPatterns                :
ExceptIfFromAddressMatchesPatterns           :
ExceptIfAttachmentNameMatchesPatterns        :
ExceptIfAttachmentExtensionMatchesWords      :
ExceptIfSCLOver                              :
ExceptIfAttachmentSizeOver                   :
ExceptIfMessageSizeOver                      :
ExceptIfWithImportance                       :
ExceptIfMessageTypeMatches                   :
ExceptIfRecipientAddressContainsWords        :
ExceptIfRecipientAddressMatchesPatterns      :
ExceptIfSenderInRecipientList                :
ExceptIfRecipientInSenderList                :
ExceptIfAttachmentContainsWords              :
ExceptIfAttachmentMatchesPatterns            :
ExceptIfAttachmentIsUnsupported              : False
ExceptIfAttachmentProcessingLimitExceeded    : False
ExceptIfAttachmentHasExecutableContent       : False
ExceptIfAnyOfRecipientAddressContainsWords   :
ExceptIfAnyOfRecipientAddressMatchesPatterns :
ExceptIfHasSenderOverride                    : False
ExceptIfMessageContainsDataClassifications   :
ExceptIfSenderIpRanges                       :
PrependSubject                               :
SetAuditSeverity                             :
ApplyClassification                          :
ApplyHtmlDisclaimerLocation                  :
ApplyHtmlDisclaimerText                      :
ApplyHtmlDisclaimerFallbackAction            :
ApplyRightsProtectionTemplate                :
SetSCL                                       : 3
SetHeaderName                                :
SetHeaderValue                               :
RemoveHeader                                 :
AddToRecipients                              :
CopyTo                                       :
BlindCopyTo                                  :
AddManagerAsRecipientType                    :
ModerateMessageByUser                        :
ModerateMessageByManager                     : False
RedirectMessageTo                            :
RejectMessageEnhancedStatusCode              :
RejectMessageReasonText                      :
DeleteMessage                                : False
Disconnect                                   : False
Quarantine                                   : False
SmtpRejectMessageRejectText                  :
SmtpRejectMessageRejectStatusCode            :
LogEventText                                 :
StopRuleProcessing                           : False
SenderNotificationType                       :
GenerateIncidentReport                       :
[email protected]
IncidentReportOriginalMail                   : IncludeOriginalMail
RouteMessageOutboundConnector                :
RouteMessageOutboundRequireTls               : False
Identity                                     : [Cust-sos-IN] Reset SCL on Scanner
emails
DistinguishedName                            : CN=[Cust-sos-IN] Reset SCL on Scanner
emails,CN=TransportVersioned,CN=Rules,CN=Transport
Settings,CN=Contoso,CN=Microsoft
Exchange,CN=Services,CN=Configuration,DC=CONTOSO,DC=LOCAL
Guid                                         : 5d1dbc9b-3718-4874-9552-296e8b98d874
ImmutableId                                  : 5d1dbc9b-3718-4874-9552-296e8b98d874
OrganizationId                               :
Name                                         : [Cust-sos-IN]
Reset SCL on Scanner emails
IsValid                                      : True
WhenChanged                                  : 17/03/2015 2:37:06 PM
ExchangeVersion                              : 0.1 (8.0.535.0)
ObjectState                                  : Unchanged

Hi MBKITMGR,
Agree with Zammit, you should use the BypassedSenders parameter to specifies the SMTP address values of senders.
After that, the Content Filter agent doesn't process any content filtering for messages received from the addresses listed on this parameter.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Transport deleted objects in productive

Hi!
Help, plz.
What is the right way to transport deleted objects (levels, packages...) to PROD system from QUALITY?

Hi Marina,
I would think the right way to transport objects would always be from DEVP (development) to PROD and not from QUALITY else after a period of time it is possible that you might have three systems DEVP, QUALITY and PROD and none of them in sync with each other.
You use QUALITY only for testing/training purposes and not for development purpose.
If you have accidentally deleted objects from Devp, would suggest recreating the same in Devp.
hope it helps

Error while transporting a Workbook

Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.R

Hi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat

Unable to capture the Data Source into a Transport Request

Hi All,
We have a product hierarchy and we are using the data source :4R_PRODH_D_LGEN_HIER for the hierarchy.
Now we need to transport this structure to the quality environment but we were not able to capture the datasource:4R_PRODH_D_LGEN_HIER into a transport request.
When ever we activate the data source:4R_PRODH_D_LGEN_HIER it is asking for the Package and the Transport Request Number.If we give these details and save it, data source is not getting captured in the request, only the "bject Directory Entry" is getting captured.
Can someone please guide me on how to capture the datasource under "Data Sources in BW" in a transport request.
Regards,
Sachin Dehey.

Hi Sachin,
Hierarachy datasource is not captured as Attributes and Text Datasource. So what ever you have done is correct.
What ever is captured in Object Directory Entry is correct. So go ahead with your transports, once transport is done check the Hierarchy Infopackage with Available OLTP hierarchies and load the data.
Most important thing first see that the all Master & Transactional Datasources are transported in R/3 Dev to QA to PRD
In BW, datasources are not transported, only their replica is transported.
Transportation of Datasource is done in R/3. Only their replica is transported in BW.
So wht ever you have done till now is correct. So go ahead.
While attaching Hierarchy Datasource it is captured only in "Object Directory Entry"
Regards,
Vishnu.

Error while assigning objects to Transport Request

Hi All,
while assigning a Transfromation to a Treq i am getting an error saying
Object '7KU37C7IG3T7AQ5NHSLEZVC91' (ROUT) of type 'Routine' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '7KU37C7IG3T7AQ5NHSLEZVC91' (in transport request ROUT) of type 'Routine' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing.
Kindly advice how to rectify this error

Hi,
You see the which infoobejct contains that routine and first collect that infoobejct and transport it then transport Transfromation. I hope you are missing some Routines while collecting the Transformations into request.
See OSS Notes:
Note 613581 - Transfer structure does not exist in version 'D'
Note 508921 - P11:Content transfer:RSO 252 or RSO 296:InfoObject
Note 1157873 - BI7.0(SP18) Message RSO 252 using transport connection
Thanks
Reddy

Error while transporting a data type

Hello all SAP PI Experts,
I'm trying to transport a data type but I'm getting the below mentioned error.
This is happening even when I gave the proper name of SWCV that contains this data type.
Please suggest how this problem can be solved.
Thanks,
Ajeya G V

Hi Ajeya,
An easy trick is to open the DataType on your Enterprise Service Builder, and once it is opened, (not edit, just open) go to Tools --Export Design Object
The correct SC will be filled as default.

Error while transporting TP in production server in workflow

Dear All,
I have done some workflows . It is working fine in development in quality but in production while TP transporting it is showing error like ' Temporary log /usr/sap/trans/tmp/TP number not found'. why this error is coming ?
Please guide m . Its urgent.
Regards ,
Shital

Shital,
Do you transporting those requests into PRD as Developer?
I think it is basis related issue, did you had any word with SAP basis person.
Any ways could you send long text when it is giving this error.
May be some sequencing issue in PRD?
Cheers
Jai

Error while transporting the cube

Hi all,
While I was transporting my cube from Development box to Acceptance box, following error occured.
   Execution of programs after import (XPRA)
   Transport request   : GCDK905220
   System              : NCA
   tp path             : /usr/sap/NCA/DVEBMGS01/exe/tp
   Version and release: 372.04.10 700
   Post-import methods for change/transport request: GCDK905220
      on the application server: bdhp4684
   Post-import method RS_AFTER_IMPORT started for CUBE L, date and time: 20080802045222
   Program terminated (job: RDDEXECL, no.: 04522200)
      See job log
   Execution of programs after import (XPRA)
   End date and time : 20080802045237
   Ended with return code: ===> 12 <===
Actually transport failed but the cube was present in the Acceptance box in inactive state
Please help me for the same.
With thanks and regards
Mukul Singhal

Hi Mukul,
This is an RC=12 issue.Contact the basis team or raise ticket basis team stating that your specified transport request is got terminated.Basis team will resolve the issue and then you can Import the transport into your acceptance system.
I hope it will help you.
Regards
Suresh B.G.

While transporting a role getting issue - Role type is undetermined

Hi
While trying to transport a single role getting the below error :
Role type is undetermined.
Can somebody help?
Regards
Saurabh

Saurabh,
I faced something pretty much similar and snote:: "770358 - PFCG: Role copy fails due to data inconsistency" worked perfectly for me.
Snote describes quite nicely about the root cause.
Please note this error might come up when you try to copy this role, perform pfud as wel.
Thanks,
Brahmeshwar

Error while transporting the Vendor in MM-SUS

HI
We are implementing SRM server 5.5 and follow a MM-sus scenario.
We were able to transport the vendor to SUS via BD14.
but now we are reciveing an error -
An error occured within an XI interface: Exception occurredE:BBP_BUPA:060 -Error while trying to create contact person. Inform system administration Programm: CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</faultText>
</standard>
</nr1:StandardMessageFault>
Can some throw light on this error.
Previously when we transffered the vendor to SUS an user
was getting created in su01 which is not getting created.
2 When a vendor is transffered it creates a contact person "DO Not USE" why it that so ???
regards,
Nimish Sheth

Hi,
Did you see the note 807812?
BR,
Disha.
Pls reward points for helpful answers.

Error while transporting req

Hi,
I have this strange problem. I have added some transformation , DTP , infopackage and routines to existing data flow.
I have put them in a single request and tried to transport them to quality server.
Now I am getting error while moving it to the quality.
The error log says that one of the transformation has error in start routine. Where is that transformation doesn't exist in the system, not in active as well as inactive mode. I have checked in RSA1 as well as table 'RSTRAN'.
Same problem with some of the DTPs as well. They are in error and they doesn't exist in the system( table RSBKDTP).
Kindly help. Am I missing something.
Regards
Vivek

Hi,
I have narrowed the problem. I had 4 transformation in that req, Now I have separate req for each transformation. Out of 4 req 3 has been transported successfully. Now I am having trouble with a single transformation and cause of the error is piece of code in include which I am using in a start routines.
LOOP AT source_package INTO ls_sourcepackage.
ls_i_mat-fpc = ls_sourcepackage-/BIC/dpmat. >> If I comment this line req get transported.
APPEND ls_i_mat TO i_mat.
ENDLOOP.
/BIC/dpmat is fiield in the structure of source package.
I am confuse why its giving trouble. The above transformation is from DataSource to Cube.
Regards
Vivek

Error while transporting

Hi All,
Iam working on BI7. I was transporting a DTP from Dev to Quality. The transport has failed with return code 8 and says 'Overlapping selection criteria with DTP'.
Iam just not able to get through this....
Pls help me out
Thnx
AP
Edited by: AP on Dec 28, 2007 8:05 PM

Hi Radek,
No, there was no DTP with the same selection criteria.
Any other suggestions??
One more question...
While Iam checking the log, the error is as follows
DTPABC overlaps with selection criteria of DTPXYZ.
DTPABC is which I transported from DEV.
I don't understand where the DTPXYZ has come from...
I've gone thru the Q but DTPXYZ is not to be seen anywhere...
Does DTP tech names change after transport?
Points will be assigned
Rgds
AP

Marine transportation

Similar Messages

Maybe you are looking for