Mark and release a new cost estimate in a different system than the one run

Hello all,
Here is my functionnal lanscape: in system A, I am managing all the stocks hence material master data.
In system B, I am managing production, financials and Controlling.
Hence, once I edit a costing run to have a new standard price in system B, how can I mark and release this new standard price for my material that is maintained in system A. Do you know any standard idoc for this purpose ?
Also, how will happen the stock revaluation.
regards,
Irène

hi
kindly check the link below:
http://help.sap.com/saphelp_40b/helpdata/fr/1a/0e3599539911d1898b0000e8322d00/content.htm
regards
eashwar

Similar Messages

When I select "open a new tab" the tab opens in a different window than the one I'm using. This is release 11.0, and did not happen in 10.0

When I select "open a new tab" the tab opens in a different window than the one I'm using. This is release 11.0, and did not happen in 10.0

Hi,
Please check if '''Open new windows in a new tab instead''' is enabled in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Tabs'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Tabs%20panel Options > Tabs]. If the problem persists, please also check if this happens in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If the new profile is okay, you can later [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy the needed personal data] from the old profile. Firefox stores your personal data and settings in [http://kb.mozillazine.org/Profile_folder another location (profile folder)] separate from its [http://kb.mozillazine.org/Installation_directory files/folder]. A new profile would have the default Firefox settings ('''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window '''Options'''], and [http://kb.mozillazine.org/About:config about:config] ), and usually would also be empty of any '''Extensions''' and themes ('''Appearance''') in Tools > Add-ons) and their settings. Also, a new profile would have no previous stored website data/settings etc., ('''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History''']).
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files]
[http://kb.mozillazine.org/About:config_entries about:config Entries]

HT4436 I have 2 I phone which is using same apple id to back to icloud and restore it. I want to use different id on the one phone what can I do or change the id?

I have 2 I phone which is using same apple id to back to icloud and restore it. I want to use different id on the one phone what can I do or change the id?

Welcome to the Apple community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add a new account by tapping the "create Apple ID" button. (Settings > iCloud, scroll down and hit "Delete Account")

Every time I try to load firefox, WindowsXP says firefox is already running but not responding and before it can load another I have to shut down the one running and reboot my computer.

My problems started when I downloaded Ilivid downloader, after I loaded the program and watched the short video the program started messing up my computer. It spread itself all over my hard drive, changed my homepage, my search engine, locked me out of being able to change certain settings, made some of its files undeleteable and since then my firefox will not load. I removed my version of firefox and reinstalled it several times. I still got the same response. I went into the registry and deleted all references to Mozilla and Firefox and reinstalled it again, same response. I spent days trying to delete all references to ilivid downloader and every file I could find that made any reference to ilivid. I hope you can help me with my problem. I like using firefox and would like to start using it again. Thanks

See
* [[Firefox is already running but is not responding]]
Try closing any running instances of ''firefox.exe'' (and plugincontainer.exe) using something such as Task Manager. That should allow you to then restart Firefox.
As for iLivid. Possibly it also has associated apps or extensions with names not including the word iLivid. Looking at their own FAQs there are instructions to remove iLivid using the Windows Control panel, and mention of other bundled software that you may wish to remove. It seems it is more of a nuisacne rahter than out and out malware.
* see http://www.ilivid.com/faq.htm (page scrolls for more info) but includes:
How do I uninstall the software?
The software can be removed in a simple was like any other software:
Go to the Windows Start menu and then to Control Panel > Add/Remove ("Programs & Features" in Vista & Windows 7) and click "Remove" next to the software name (e.g iLivid Download manager / Windows iLivid Toolbar ).
During the installation bundle software are offered, each can easily be removed following those instructions: Uninstall Yontoo Addon , Uninstall Search Toolbar (powered by Bing) or Uninstall Babylon.

How do I change my Ipad to access Itunes store in a different country than the one I usually use and have my account with?

I usually use the Itunes application on my Ipad in FRence and use the French Itunes store. I am now in Cyprus and after synchronising my Ipad there I now can access the US Itunes Store but my purchases are refused as my account is with the French Itunes store. How do I either open an account with the US Itunes store or revert to the French Itunes store on my Ipad?

synchronising is not the problem i think, you need a new US apple id. i only have a malaysian credit card but i have separate ids for US UK and Malaysia. i have travelled to these 3 countries and have home adresses in each country but for buying stuff, I use an iTunes store card instead of a credit card cos its easier. you do not need a credit card that must have billing address from the same country as the iTunes store. So I would suggest if you are currently based in the US go the nearest apple store buy an iTunes store card (i buy in multiples of US$100 with a credit card) and use your current US home address as the US iTunes address.
so log off your french iTunes store account, create new US apple id for your iTunes store account using your current US address and then redeem your itunes store card and voila you are set to go. (did i mention you will also need a new separate email address for the new apple id) i have one each from gmail, yahoo and hotmail for each separate id.
the only drawback is that when you want to do an update for the apps that you buy from the different iTunes store, you must log in to that iTunes store account ie if you buy an app from the US store you must log in and update with the US store id and to update the apps from the French store you must log off from the US store and log in again with the french store id.
hope this makes sense to you.

I'm opening a garageband file on a different computer than the one it was made on, and my drum loops are playing as low pitched beeps instead of the jazzy brushes I want. I believe my version is more up-to-date than what I used first. How can I fix this?

I believe I said it all in the question...

Could it be that you had more instruments on the old computer? Or haven't correctly installed the instruments on the new one?
Obviously, GB hasn't assigned a drum instrument to the track that the drum notes are on (my guess: since it doesn't have the desired drum set.) Press cmd-I to make the track info pane visible and pick one of the drum sets for that track.

Ever since upgrading to Lion my iMac opens to a different admin than the one last used and has to be switched. How can that be changed?

How can I change which user boots at start up? Ever since upgrading to Lion X my iMac no longer opens to the user on it prior to shut down. It now opens to a user who is virtually never on - which is actually me under a different name. This division of my Mac happened when I switched to my new Mac and didn't know I had to use the same name to transfer my data. My old data is listed as a separate user. Over time my old user name brings up a window full of ???? at the bottom. It looks like no apps ever upgrade there. It is driving me crazy to have to now switch back each time I start my computer. (I am using an iMac with 3.06 GHz Intel Core 2 Duo processor).

How can I change which user boots at start up? Ever since upgrading to Lion X my iMac no longer opens to the user on it prior to shut down. It now opens to a user who is virtually never on - which is actually me under a different name. This division of my Mac happened when I switched to my new Mac and didn't know I had to use the same name to transfer my data. My old data is listed as a separate user. Over time my old user name brings up a window full of ???? at the bottom. It looks like no apps ever upgrade there. It is driving me crazy to have to now switch back each time I start my computer. (I am using an iMac with 3.06 GHz Intel Core 2 Duo processor).

CK11N, release new costing estimate

Hello all experts,
Please help me on the following question, thank you!!
For example: Product A, it has a standard cost estimate which is released on 01.01.2010, it's costing date from is 01.01.2010 and costing end date is 31.12.2010. In the middle of the year, for example in May, the exchage rate was change a lot, so we want to release a new cost estimate for it. The costing start date is 01.05.2010 and costing end date is 31.12.2010.
My question is: Is it possible for me to do so directly in CK11N and then mark and release it in CK24?
Thank you very much!!!
Mavis

Dear,
The Standard Cost Estimate/Costing Run will be executed only in Company Code Currency i.e., Local Currency. Exchange rate differences will happen only during execution of Actual Postings.
For example : Goods Receipt of 100 units @ $ value of Rs. 45.
Finished Goods Account   DR      4500
GR/IR Clearing Account    CR       4500
Invoice Receipt/Invoice Verification -MIRO:
Invoice Receipt 100 units @ $ Value of Rs.48
If the stock is available, the Inventory/Stock Value will be revaluated with the new price. If the stock is not available the Exchange difference will be posted to Exchange Gain/Loss Account based on OBYC settings, like this.
Exchange Gain/Loss A/c     DR     300
GR/IR clearing A/c               DR   4500
Vendor A/c                            CR   4800
If you want to update the Material Master with new Standard Price, you need to Reorganize existing Cost Estimate through t-code CKR1 and re-run t-codes CK11N and CK24 for Mark and Release the new price.
Regards
appalas
Edited by: appalas on Jan 27, 2010 7:07 AM

Product Costing - Two Costing Variants - Mark and Release In Same Company Code Same Period

Hi All,
We are currently handling a CO-PC project where client has requirement to use two different costing variants in the same period in the same company code. SAP standard does not allow use of two costing variants in the same period for the same company. We can have only One Costing Variant per Co Code for Marking / Releasing Standard Price.
There are some materials in Plant 1 or Plant 2 for which cost estimates using costing variant ABC1 calculated and than prices are marked and released (CK24), now same materials are received in Plant3 where mixed costing is used and thus need to have cost estimates from second costing variant ABC3 (second costing variant) marked and released. Object is to have ABC3 cost estimates in material master standard price field, but SAP does not allow to mark and release for second costing variant in the same period for same co code as ABC1 variant already ran for plant1 or Plant2 under same company code,therefore, business is not able update ABC3 prices in Standard price of the material master.
Purpose of this second costing variant mark and release run is that for some materials business would like to implement costing at Plant3 level also, where they get same materials from different production sites (Plants). At Plant3 level, business is using mixed costing where the standard price is a weighted Average standard price, taking the different production sites standard cost into consideration in combination of the volume split between those production sites.
Did any one worked on this kind of requirement? Is there any SAP standard way to handle? Or this will need some ABAP enhancement?
Kindly advise.

Hi Atul
1. You dont need separate Valuation Variant in Plant 3
2. Use Costing Variant ABC1 and ensure that it has the needed Valuation Strategies in Valuation Variant
Allow Complete Transfer in the Transfer Control i.e. Cross Plant Transfer in it
3. Assign the Qty Str Type you have used in ABC3, to ABC1.. i.e. In the Costing Version, assign the Qty Str Type to the Costing Type and Valuation Variant from ABC1
After this, do CK11N and CK24 for Plant 1
Then do CK11N and CK24 for Plant 3, using ABC1.. You dont need to change anythiing before doing CK11N for Plant 3
To make it simple, you can use any one of ABC1 or ABC3 in both the plants.. You only need to ensure that Valuation Variant, TRansfer Control are set up as desired
Br. Ajay M

Sales order Costing mark and release

Dear all,
Kindly help on the following issue:-
Can we mark and release Sale order costing like product costing(in CK24).
best regards,
Gaurav

Hi,
Sale order costing is determined by Requirement Class and Item category defined for MTO process in Product Costing.
Sale Order costing keeps changing when you compare normal costing with CK11n or CK40n.
Regards
Balaji

CK24 - mark and release with different costing version

Hi,
We are currently using standard costing variant PPC1 and costing version 1 to mark and release the standard costs. However when we try to recost the material cost due to price changes, system does not allow to mark & release revised standard cost if we try to mark & release on same day. pls note standard cost estimate is already released for the month. And we do not want to delete existing standard cost estimate. Instead we want to explore other options. We are using 4.7.
My questions are :
a) Can recost using costing version 2? CK11N allows to save the costing result. However in CK24 Marking allowance, system does not allow to change Costing Version. is there any config option to change this.
b) If we cannot use different cost version, can we update material cost with same costing variant (PPC1) and costing version (1) in this case. However when we tried to do recost with same costing variant & verison on same day, system gives an error 'Material AAAA in plant MMM has a released cost estimate.'
Any inputs on above issue highly appreciated.
thanks
Sunil

Hi,
While, you can use any of the Costing versions to mark & release Standard cost estimate, you can release Cost estimate only once in a fiscal period. If you want to release correct prices, then you have delete existing released cost estimates using CKR1 transaction and then re-run CK40N to release.
Hope this helps.

Delete Costing run - marked and released

Hi
I did one costing run which was marked and anolther costing run which was marked and released also.
I want to delete both the above.
Which transaction I can use for this and what is the implication of them ?

Hi NIkhitha,
CKR1 is the Tcode for Deletion of Cost Estimate as told by Ajay. However to add few implications and points to be reviwed before deletion.
1. Check whether it is really necessary to delete
2. Any Orders are being valuated by this Cost Estimate price
SB

Sytem restrictions during Releasing new Cost Estimate during the year

Hi,
We are currently using Moving Average Price for Traded materials (Material type ZHAW) with Price Control indicator "V". We have an internal requirement to change the basis of valuation to Standard Cost immediately. Thus we have to change the following immediately before the close of the current Financial year:
1) Change the Price control indicator from 'V' to 'S' in the material master of Traded materials.
2) Thereafter, release new Standard cost estimates for all such materials in the current year. This is required because the business wants to have a different standard cost from the existing Moving average price.
I would like to know what are the system restrictions / safeguards to be taken care of before doing the above activities, since we are doing this before the period-end & year -end.
Your early response will be appreciated.
Regards,
R.Rajaraman

You can change the price control from V to S or vice versa. You might need some additional config for if required to send the price differnece to variances account in OBYC. Other than that since it is trading materials which are not produced you might not need Product Costing Planning.

Regarding marking and releasing in CK24.

The customer has a direct delivery process as in they purchase finished goods and just sell them. Such a material is newly created under a plant.
In this case there is no in house production of that material and the price needs to be maintained manually in MM01. But the user has created a PIR for it and run CK24.
Now when I try to change the value of the std price using MM02 I am not able to.
how do I set the std price manually for this material after the CK24 run is carried out?

Dear Ajitha Koti,
check this,
1. A raw material's (Externally procured material)price can be captured either using a moving average
price or using a planned price or using a price change done in MR21.
2.Standard cost estimate are generally carried out for the Finished product and while doing the
calculation the system calculates the cost of the Semi-finished product or sub-assemblies.
3.Standard cost estimate will be carried out only once in a period for a product.
4.This can be done either using CK40N alone or else using CK11N for cost estimate and CK24 for
Marking and release.
5.Creating a PIR has no impact or no way related to costing.
so now check and come back with your queries.
Regards
Mangalraj.S

I have an iphone 4, and its the first edition... i need a new phone and the latest is the iPhone 5. im wondering if apple will release a new phone soon or should i go with the iphone 5?

I have an iphone 4, and it's the first edition... I need a new phone and the latest is the iPhone 5. I'm wondering if apple will release a new iphone soon or should i go with the iphone 5?

No one here would know Apple's plans. But, if past history holds true, expect a new model iPhone sometime between now & the fall.

Mark and release a new cost estimate in a different system than the one run

Similar Messages

Maybe you are looking for