Mark ask Watched not working

Since the Airplay update yesterday my Apple TV Gen 2 no longer marks shows as watched. In fact, if I manually mark as watched within a few minutes they are all shown as unwatched again.
Yes, I've rebooted the Apple TV and my Mac.
This is highly annoying!

Weird. I had that problem before and it's been fixed since the update.
Have you tried restoring the ATV?

Similar Messages

Book Mark Icon is not working?

Hi,
There is an Adhoc query created by the end user.The book mark icon available is not working but the CONTEXT MENU on any of the values is producing the book mark properly.Can just any one help me to find the solution of this?
Why BOOK MARK ICON is not working?
Please correct me if I am wrong.
Book mark is URL we are getting after the clcking on the EIther on the ICON or context menu option.This URL can be used any where where ever is required.Right?
But In my case the URL Content is chainging based on the Adhoc query designer.Only characterstics are again and again changing but key figures are original only.
please help me?

U mean to say the Book Mark URL created on one system will not work on another system right?
=>the Book Mark URL created on one system may not work on another system right? in fact in 80% cases it works...
But what once I execute the query in portal I will be getting an URL.This also can be used as Book mark right?
=>yes, it can be used,,,
but the URL generated with the function of the BOOK MARK is only called as Book mark why is it?
=> let me explain this with an example ... there is a BW server physically located in France and can be accessible across all the location wherever project is running. Somebody try to access the Query URL from Gurgaon (one of the project location)which was executed in France may not be run in Gurgaon (Page cant be displayed) because port # in the URL may be blocked in Gurgaon due to security reason,,, this case we have to contact the admin ,they will enable the port..same case i have faced

Book mark Icon is not working in Adhco queries?

Hi,
There is an Adhoc query created by the end user.The book mark icon available is not working but the CONTEXT MENU on any of the values is producing the book mark properly.Can just any one help me to find the solution of this?
Why BOOK MARK ICON is not working?

Hi,
I observed the same, Book Mark Button availabe on web report is not working but Book mark URL can be saved with the context menu -> bookmark.
need to check the Web template for Book Mark.
Bookmark URL can be saved and that URL is used to go fastly to the requied navigation fastly, that is the use of Bookmark
hope this helps
Regards
Daya Sagar

Mark debug 'sometimes' not working

I find mark debug sometimes not working.In my new project ,I add mark debug = true, then set up the debug nets.I can't find them in the assigned nets ,but from the netlists I find some of them.The missing nets are wire type,notregister type.Does the command not work on wire type nets?
Because my project is very large, searching for the nets requires a very long time.So I hope Xilinx can fix this bug.

Rather than open another thread, I'll extend this one since I'm having what I think is the same problem.
I'm using Vivado 2014.4. "Flatten" is set to "None". The nets are set in the elaborated design with MARK_DEBUG and DONT_TOUCH. But when synthesis gets done with them, the names are completely different.
I don't care if the "equivalent" nets are still there. I need the names. Every time synthesis runs, it's a crapshoot whether the names will change. Particularly bad are 500+ bit buses that get exploded into individual signals. I don't have the time to regather them into the proper buses every time.
In general, I've been pleased with the changes in Viviado. But I can't believe how badly a wonderful tool like ChipScope has been screwed up.

'Your Watches' Not Working

The 'Your Watches' feature is currently not working. It seems to break every day that I use OTN. Could this be fixed please? Please don't suggest this is due to 'transient network conditions', etc. - it's a problem with OTN.
Thanks.

A forthcoming upgrade should resolve the chronic instability of the "Watch" functionality. Until then, please bear with us.
Cheers, OTN

Question mark key does not work..... starnge

right, every key but the question mark seems to be working fine. One thing I know, this is an internal malfunction. I connected another keyboard via usb and the same problem persists.
Anyone experience this weirdness before(question mark)
eg
p.s. every time I try to use it I get a sonar sound only

Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
(48414)

Pdf stamping (water mark) functionality is not working in sharepoint 2010

Hi
I have developed custom handler(.dll) for pdf file stamping functionality using Ihttphandler in VS2010 with help of
iTextSharp. deployed the hanlder in GAC and referred hanlder in handler section of the web.config file one of the
Sharepoitin 2010 site. the stamping functionality is working fine when I am using <Mapping Key="pdf" Value="pdf16.gif"
OpenControl = "Malag.OpenDocuments"/> mapping key for PDFs in DOCICON.XML. after doing all this settings when open any pdf
from sharepoint site it opens in the browser with stamping (water mark) on each page of pdf file. Now i want open the file
in Adobe Reader X with check out & check in options. i have changed mapping key for PDFs in DOCICON.XML file to <Mapping
Key="pdf" Value="pdf16.gif" OpenControl = "PdfFile.OpenDocuments"/>. After changing when click on pdf file in site it opens
adobe reader X prompting Chewck out & open etc.. option, if i select Open option the PDF file is not opening & showing
message "There was an error opening this document. File open failed". Please let me know solution how to solve this issue.
Here is my handler code..
using System.IO;
using System.Web;
using Microsoft.SharePoint;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Configuration;
using System;
using Microsoft.SharePoint.Administration;
namespace WSPPDFStamping
    class WSPPDFStampingHtppHandler:IHttpHandler
        public bool IsReusable
            get
                return false;
        public void ProcessRequest(HttpContext context)
                    var siteId = SPContext.Current.Site.ID;
                    var sec = new SPSecurity.CodeToRunElevated(delegate()
                                using (var site = new SPSite(siteId))
                                    using (var web = site.OpenWeb())
                                        SPFile file = SPContext.Current.Web.GetFile(context.Request.Url.ToString());
                                        string RequestedURL = context.Request.Url.ToString();
                                       // string connStringUrl = "";
                                        string connStringUrl = "";;
                                        bool isAdd = true;
                                        byte[] content = file.OpenBinary();
                                        SPUser currentUser = SPContext.Current.Web.CurrentUser;
                                        string siteWebAppRoot = "/" + SPContext.Current.Site.WebApplication.DisplayName;
                                        System.Configuration.Configuration rootWebConfig =
                                System.Web.Configuration.WebConfigurationManager.OpenWebConfiguration(siteWebAppRoot);
                                        System.Configuration.ConnectionStringSettings connString;
                                        if (0 < rootWebConfig.ConnectionStrings.ConnectionStrings.Count)
                                            //connString =
                                            //    rootWebConfig.ConnectionStrings.ConnectionStrings["PDFStampingURL"];
                                            //if (null != connString)
                                            //    connStringUrl = connString.ConnectionString.ToString();
                                            for (int i = 0; i < rootWebConfig.ConnectionStrings.ConnectionStrings.Count; i++)
                                                string connStr = "PDFStampingURL" + (i + 1);
                                                connString =
                                                    rootWebConfig.ConnectionStrings.ConnectionStrings[connStr];
                                                if (null != connString)
                                                    connStringUrl = connString.ConnectionString.ToString();
                                                if (RequestedURL.Contains(connStringUrl))
                                                    isAdd = true;
                                                    break;
                                                else
                                                    isAdd = false;
                                        //if (!RequestedURL.Contains(connStringUrl))
                                        if (!isAdd)
                                            context.Response.ContentType = "application/pdf";
                                            context.Response.BinaryWrite(content);
                                           // context.Response.AddHeader("content-disposition", "attachment; filename=" + file.Name);
                                          // context.Response.AddHeader("content-disposition", "inline;filename=" + file.Name);
                                            context.Response.End();
                                            isAdd = false;
                                            return;
                                        string watermark = null;
                                        if (currentUser != null)
                                            watermark = "Document downloaded by " + currentUser.Name + " on " + System.DateTime.Now + " PST.";
                                        if (watermark != null)
                                            PdfReader pdfReader = new PdfReader(content);
                                            using (MemoryStream outputStream = new MemoryStream())
                                                PdfStamper pdfStamper = new PdfStamper(pdfReader, outputStream);
                                                BaseFont baseFont = BaseFont.CreateFont(BaseFont.HELVETICA_BOLD, BaseFont.CP1252, false);
                                                for (int pageIndex = 1; pageIndex <= pdfReader.NumberOfPages; pageIndex++)
                                                    //Rectangle class in iText represent geometric representation...
                                                    //in this case, rectangle object would contain page geometry
                                                  iTextSharp.text.Rectangle pageRectangle = pdfReader.GetPageSizeWithRotation(pageIndex);
                                                    //PdfContentByte object contains graphics and text content of page returned by PdfStamper
                                                    PdfContentByte pdfData = pdfStamper.GetOverContent(pageIndex);
                                                    //create font size for watermark
                                                    pdfData.SetFontAndSize(BaseFont.CreateFont(BaseFont.HELVETICA_BOLD, BaseFont.CP1252, BaseFont.NOT_EMBEDDED), 8);
                                                    //create new graphics state and assign opacity
                                                    PdfGState graphicsState = new PdfGState();
                                                    graphicsState.FillOpacity = 0.7F;//= 0.4F;
                                                    //set graphics state to PdfContentByte
                                                    pdfData.SetGState(graphicsState);
                                                    //indicates start of writing of text
                                                    pdfData.BeginText();
                                                    //show text as per position and rotation
                                                    pdfData.ShowTextAligned(Element.ALIGN_MIDDLE, watermark, pageRectangle.Width / 4, pageRectangle.Height / 44, 0);
                                                    //pdfData.ShowTextAligned(Element.ALIGN_CENTER, "For Internal Use Only", pageRectangle.Width / 2, pageRectangle.Height / 2, 45);
                                                    //call endText to invalid font set
                                                    pdfData.EndText();
                                                    //Top text
                                                    PdfGState graphicsStateTop = new PdfGState();
                                                    graphicsStateTop.FillOpacity = 0.005F;//= 0.4F;
                                                    //set graphics state to PdfContentByte
                                                    pdfData.SetGState(graphicsStateTop);
                                                    pdfData.BeginText();
                                                    //pdfData.ShowTextAlignedKerned(Element.ALIGN_LEFT, "TEXT Left", 150, 628, 0);
                                                    pdfData.ShowTextAligned(Element.ALIGN_CENTER, watermark, pageRectangle.Width / 2, pageRectangle.Height - 13, 0);
                                                    //call endText to invalid font set
                                                    pdfData.EndText();
                                                    //Set 45 degree water mark
                                                    PdfGState graphicsState45 = new PdfGState();
                                                    pdfData.SetFontAndSize(baseFont, 38);
                                                    graphicsState45.FillOpacity = 0.07F;//= 0.4F;
                                                    //set graphics state to PdfContentByte
                                                    pdfData.SetGState(graphicsState45);
                                                    pdfData.BeginText();
                                                    //show text as per position and rotation
                                                    pdfData.ShowTextAligned(Element.ALIGN_CENTER, "Registered For Internal Use Only", pageRectangle.Width / 2, pageRectangle.Height / 2, 45);
                                                    //pdfData.ShowTextAlignedKerned(Element.ALIGN_LEFT, "TEXT Left", 150, 628, 0);
                                                    //call endText to invalid font set
                                                    pdfData.EndText();
                                                pdfStamper.Close();
                                                content = outputStream.ToArray();
                                        context.Response.ContentType = "application/pdf";
                                        context.Response.BinaryWrite(content);
                                       // context.Response.AddHeader("content-disposition", "attachment; filename=" + file.Name);
                                     //   context.Response.AddHeader("content-disposition", "inline;filename=" + file.Name);
                                        context.Response.End();
                    SPSecurity.RunWithElevatedPrivileges(sec);
web.config file of share point site
<handlers>
    <add name="PDFWatermark" verb="*" path="*.pdf" preCondition="integratedMode"
type="WSPPDFStamping.WSPPDFStampingHtppHandler, WSPPDFStamping, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=835cc3a26d74a89a" />
    </handlers>
thanks in advance.
jampani venkateshwar rao.

Time to engage in basic debugging. Alter your script to remove all the extra steps and generate logs as it goes along, then gradually re-enable each part so you can work out where it's bombing out. It doesn't sound like a problem with Reader itself, and as Claudio says we're not here to provide support for non-Adobe software.

Jdeveloper 10.1.3.5 "Mark as Template" not working

HI
I created a generic BPEL project which I have converted into a template using the "Mark as template" option.
I created a new project based on this template but the ".bpel" file itself is not getting created and no components from the Template project are visible.
Is this a bug or am I doing something wrong here? What can be the workaround so to succesfully create a new project from a template?

Please post this on the SOA Suite forum.

My question mark key is not working

when i go to type a question mark, it comes up like this ^. Thoughts

Does it work when an external keyboard is plugged in?
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

Smart watch not working

hiya
i got a u8 u watch (smarth watch)
i cant use jailbreak beacuse it is upto date
and i cant find a app in the store
am i missing it or is their a app somewhere ?
i need to sync them together, i have pared them with bluetooth and i can take calls and music but thats it.

Hello JamesSwain and others.
I just started using an iPhone 5 recently (about 2 weeks into it) and updated to the latest iOS 8.2 which fixed a number of issues with 8.1.3 and previous versions. I also suspect it cleaned up some things for the iWatch which is now available:-). I then purchased a UWatch U Terra. I am really excited about using this with my iPhone and Hopefully this is similar enough to other UWatches like the U8 UWatch for everyone to get some benefit from my comments. iWatch is cool...really cool especially the $17,000 version with the rose gold and sapphire crystal (drool), but not everyone has $17,000 or even $400 to shell out. The UWatch has quite a few essential features that are a great low-cost compromise for cheap geeks like myself. My experience so far (just got the UWatch today):
* Out of the box, the UWatch will control the phone's call and answer functions, allows sync with the phone book contacts, allows music to be played once the player is enabled on the phone...that's about it.
* After some examination of various help information on the Apple website and various forums, I figured out that if I enable SMS messaging on the iPhone under settings-Messages-"Send as SMS", then I do get notification that a message has been received by the phone...one little thing done!
* After another couple hours of persistent searching through the internet, I ran across an obscure message from a chat forum and on the www.gearbest.com website that sells similar UWatches: go to the App Store and download/install "Mediatek Device". This application looks as if it just enables workout tracking data to and from the watch and iPhone, but it ALSO enables SMS messages to appear on the phone so they can be read. There seems to be some functional issues with the message app on the phone retaining these, but at least they are notified and can be read without having to get out the phone! Unfortunately SMS does not allow images, but maybe future upgrades will improve the capabilities.
* The Mediatek Device App also enables the control of the iPhone camera once the camera is turned on at the iPhone. Shutter control only as far as I can tell, but that's all I really need.
I also played around with the App other people have mentioned called "UWatch" at the App Store. This App has a really good interface, but seems non-functional with my setup...and apparently with most of the other users who have tried it. I hope that the developer can make a few upgrades and really enhance the UWatch experience for everyone.
Hope this is helpful to all. Best of Luck! If anyone finds further information, please post here as I will be checking back to review and answer any new questions

Marks And Bleeds Not Working

Hi,
I am running Mac OSX 10.4.11, Adobe Acrobat CS3, and have a Canon Pro 9000 printer. When I go to set up a document to print and click the advanced button to get to the advanced print setup screen, I then click on marks and bleeds, but the check boxes are grayed out so I cannot select the trim marks option. I could in my version of Acrobat Pro CS1.
Any help would be greatly appreciated.
Paul

Hi Jon,
Thanks for the reply.
Is the PDFMark data new to the CS3? I could use the trim marks in the CS1 version of Acrobat. Also, when I export to PDF from Quark, I export to Acrobat version 5. Do you think if I exported to a higher version I could get the bleed marks to work?
Thanks again for your help,
Paul

Help Needed With "Extend Marker" Function Not Working

I have several Clips and used the "DV Start/Stop Detect" function to find the time code breaks, which seems to work well. I've now got a clip full of Segment markers.
The problem arises when I try to use Extent Markers "Option + `" to make subclips. When I put the play head on a subsequent marker, the Marker/Extend function is grayed out.
Extending a marker that I have created using the M key works perfectly.
Why can I not use the Extend function on Segment Markers?
Any help on this is greatly appreciated. I have 30 odd clips that I need to set up segments for, and doing it manually will add hours to my workload.
Thanks
Gary
Dual G5 2.5 GHz Dual Core, 2.5 GB RAM, 500 GB HDD Mac OS X (10.4.3) Final Cut Studio FCP 5.0.4

Thanks for the reply.
I am completely aware of items 1 through 3, and never Extend markers in the Timeline. Only the Viewer.
To perform an Extend Marker and avoid headaches, load the captured clip - the one with the video icon in the Browser - into the Viewer. Then, as you scrub along in the Viewer, Option-` as needed.
That is precisely what I am doing.
To Extend the marker I first double click the clip to load the entire clip into the Viewer, where all the Section markers are displayed. I then check Mark>Markers>Extend and the function is grayed out. However, if I move the playhead one frame prior to the Section marker, the previous Section marker extends to the frame prior to the new play head position.
If I do this with manually entered markers (using the M key, creating Marker 1, 2, 3.... in sequence on the Viewer timeline), then the Previous marker is extended to the frame immediately prior the the current play head position - i.e. from Marker 1 to Marker 2. I do not have to move off the Marker 2 position to be able to extend Marker 1.
Also, simply selecting all your Markers and either dragging them to another bin (or pressing Command-U) does not produce the needed subclips?
Of this I am also aware. I find the Command-U process just confuses the issue, creating more clips to manage (others may disagree). I prefer to simply drag the "Subclips" directly from the Main clip into a Timeline.
Because you're doing all this to get subclips, right? Or wrong?
If I understand your reply correctly, I think you misunderstood my problem. I have been using subclips for several years, and find them VERY useful, especially with multi-camera shoots. So, I am quite familiar with creating and extending markers.
I just started experimenting with the Detect feature and find it works quit well (most of the time). My problem is that the Segment markers created by the Detect process, do not perform the same as manually place markers, as far as the Extend marker function is concerned, anyway.
BTW - By using the TC display in my Panasonic PV-GS400 Camera, and sending the FCP video via Firewire to the camera, the camera displays the TC on the captured clip, which I then rename the marker to for TC reference. As long as the Date/Time on the cameras are properly synced, syncing clips in the Timeline is a breeze!!
Anyway, to clarify, my process is as follows:
1. Capture a clip.
2. Display the clip in the Viewer
3. Select "DV Start/Stop Detect" and watch as the section markers appear in the Viewer.
4. In Viewer, place play head on the first Section marker
5. Press the M key to Edit Marker.
6. Change the Name of the marker to the timecode of the Marker now displayed in the Camcorder window.
7. Use Shift-Down Arrow to move to the next Section Marker
8. Press Option+` to Extend the previous marker - which does not work and is grayed out in the Mark>Markers>Extend menu.
9. Back to step 5.
This process works perfectly with manually created markers. Because the Extend works if I move the play head one frame prior to the current Section marker, this tells me there is something "special" about the Section marker that disables the Extend function, unlike a manually created marker.
BTW - If I delete the Section marker, and create a manual marker at the same frame, the Extend marker function works again. Again, indicating that Section markers are different somehow from manual Markers.
Hopefully, this wordy explanation of my process clarifies my problem.
Aside: The clips are supplied to me by a customer on a 500GB FW800 drive. FCP5 was used to capture the clips from the original Tapes (which I do not have access to). I am the editor for the project.
Thanks again for the reply. It is greatly appreciated. If there is any other info that I have missed that will help figure this out, please let me know and I will post a response a quickly as possible.
Gary

Canon 5D Mark III, Lightroom4 tethered not working

Canon 5D Mark III is not working in tethered mode with Lightroom 4. Any idea when this will be updated?

Anyone tried this on RC2?
Kr,
Ashvin
www.totaalfotografie.nl

Chapter Marker Buttons Not Working & .dvdproj Files Too Large

Chapter marker buttons do not work after saving as VIDEO_TS folder. Only first chapter marker button works in DVD player after VIDEO_TS files are created. The other buttons do nothing. My chapters were created automatically in iDVD. Also, original .dvdproj file mushrooms from 132KB to 3.2Gig upon each "save as VIDEO_TS folder" process. Then reopening original .dvdproj file takes 5 minutes, and I must "save as" to create a new copy to bring the file size back to 132KB. This is horrendous. "Save As" file works fine, but makes a new huge .dvdproj file after creating another VIDEO_TS folder. Unable to complete any project in '08 iDVD.

+saving as VIDEO_TS folder.+
Don't do that. From Help:
+Saving as VIDEO_TS folder: Saving a project as a VIDEO_TS folder allows you to play it back, on your computer, using software such as VLC media player. Saving as a VIDEO_TS folder is similar to saving as a disc image: the output quality is the same, and both methods take about the same amount of time to complete. *You can’t burn a disc from a VIDEO_TS folder*.+
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
http://www.kenstone.net/fcphomepage/image_to_diskstone.html
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Certain keys not working on my Macbook Pro

recently the return, right shift and backslash-question mark key do not work on my macbook pro. I don't believe there was any damage from spills or other physical reasons. I took off the key cover and cleaned it with air but it didn't help. Does anyone know if there is a solution to fix this or is just something I will have to take in for repair.

Hi, Try reading this and see if it helps you out:
http://support.apple.com/kb/TS1381

Mark ask Watched not working

Similar Messages

Maybe you are looking for