Mark for deletion and Discontinuation difference?

Hello,
What is the difference between using MM17 and WSE4 for an article. I understand that using MM17 i can mark the article for deletion and by using WSE4 i would make the article to be discontinued. But when we run the archiving program will the article be removed from the system in both the cases?
Thanks,
Anju.

Hi Anju,
Marked for Deletion :
When you mark an article for deletion,the following consequences occur
1)The listing conditions ared deleted
2)The Article master record remains valid
3)Stock may be available
4)You can sell the article
5)You can't place any orders on this article
Discontinuation of Article :
When you discontinue any article,the following consequences occur
1)Article master data is deleted from the database itself
2)Purchasing info records are deleted
4)Listing conditions are also deleted
Hope it helps.
Rgds,
Aram.

Similar Messages

Diff between Block/unblock & mark for deletion of GL accounts

Can any one let me know the difference between Block/unblock & mark for deletion of GL accounts

Hi,
If you block a GL Account using transaction code FS00, the account is blocked for posting. No financial transactions can be posted to that account. We can unblock the GL Account at any time by clicking on unblock icon. Blocking can be done at Company Code level or at Chart of Accounts level.
For deleting or archiving the GL Master data it needs to be first marked for deletion and then delete it. This can also be done at Company Code level or at Chart of Accounts level.
You can also read the following link:
http://help.sap.com/saphelp_46c/helpdata/en/c7/a89dd243dd11d182b30000e829fbfe/frameset.htm
Thanks
Murali.

Is it possible to change warning "& is marked for deletion" to a hard error

As part of our periodic update of our bank directory in transaction BAUP, Bank Keys which are no longer valid are marked for deletion. We are not at the point where we are archiving records yet, so the actual deletion has not occurred in our system.
When an HR user updates a person's bank information (transaction PA20 or PA30, InfoType 09), if they enter one of these bank keys, they are given a warning that the bank key is marked for deletion. However, this is not a hard stop, only a warning message. As a result, they are able to save the record with an invalid bank key. The details indicate that this is message class F4, message 230. However, it appears from the IMG that it may be message 210. I have tried working with each of them.
I have attempted to change the message to a hard error in message control, but have not been able to do so. I receive an error telling me that "Message 230 (or 210) is not allowed". I have tried several application areas, including FV, Electronic Banking Messages.
Is there any way in configuration to change this to a hard error? If so, please supply details, including application area.
Also, are there risks of disruption of standard business processes if we do change this to a hard error? I know that this same message is issued for other master data elements which are marked for deletion such as GL accounts or Customer records,
Thank you.
I have searched forums with terms "marked for deletion" and "warning" but have not found an answer. I have also searched various outside expert forums on this topic. Everything I have seen seems to assume that this message will be a warning only.
Aoife B.
Edited by: Aoife Bratton on Oct 16, 2008 4:16 PM
Edited by: Aoife Bratton on Oct 16, 2008 4:16 PM

If particular message is not allowed in OBA5, then it is not configurable message. Neverthless if you like to change this message, you need to configure this in OBMSG first

FI Vendor marked for deletion

Hi All,
I wanted to know if i have marked a vendor for deletion and all the post has been blocked then will i be able to do the payment? I am technical consultant so not much knowledge on FI module. Can anybody tell me the tcode also related to this.
Thanks
Salish

Hi,
Vendor Marked for Deletion and Posting Block in Co.Code,
You wont able to do the Payment .
Vendor Marked for Deletion      - FK06 / XK06
Posting Block               - FK05 / XK05
Payment Block          - FB02 or at the time of Invoice u2013FB60/F-43
Regards,
Sridhar Sha

Vendor master marked for deletion

Hi Gurus,
I have the following issues related to vendor master deletion.
1. I can able to create PR, release the PR for the vendor after marked for deletion and also blocked in XK05.
2. It allows to maintain RFQ for the vendor marked for deletion and also blocked in XK05.
3. It allows to release PO for the vendor marked for deletion and it blocks only after blocking in XK05
4. It allows to post GR and IR for the vendor marked for deletion and also in blocked in XK05.
Appreciated your help on this.
Thanks and regards
Durai

the deletion indicator is a preparation for archiving.
However, archiving will check whether the vendor is still in use and must be kept.
A deletion indicator will with standard customizing not restrict the usage. The user get a warning message and this should him make start thinking.
1. I can able to create PR, release the PR for the vendor after marked for deletion and also blocked in XK05.
Do you have a purchasing organisation. in the requisition? XK05 restricts the order creation, I do not know about any restriction in requistion creation or release.
2. It allows to maintain RFQ for the vendor marked for deletion and also blocked in XK05.
This should not be possible if the purchasing block is set according to OSS note 67341
3. It allows to release PO for the vendor marked for deletion and it blocks only after blocking in XK05
Thats correct, If the vendor was not blocked at PO creation, then system has to allow the follow on activities, explained in OSS note 129836
4. It allows to post GR and IR for the vendor marked for deletion and also in blocked in XK05.
same as for Q3, explained in OSS note 129836

How to reset OpenLDAP service that was marked for deletion

Hi,
I installed the Shared Services, Essbase and Planning in my PC. After installing it, I went to services screen. I found that OpenLDAP service was in 'Started' and 'Disabled' status. When I try to change the status of the service from 'Disabled' to 'Automatic' or 'Manual', I am getting an error 'The specified service has been marked for deletion'. If I tried to stop the service, the service is vanishing from services list. I am consistently facing this issue even if I tried to reinstall all the modules. Can any one tell me how can I resolve this issue?
Thanks in advance,
Chandu

Hi,
I take it that after it has been marked for deletion and you reboot then the service is removed?
I am not sure what version you are on but for 9.3.1 to create the OpenLdap service again,
open a cmd prompt to directory
*\Hyperion\SharedServices\9.3.1\openLDAP*
and type :-
slapd.exe install OpenLDAP-slapd "Hyperion S9 OpenLDAP"
Cheers
John
http://john-goodwin.blogspot.com/

Remove marked for deletion items from f4 search

Dear Consultants
We have many customers, Vendor, Cost centres which are marked for deletion, and we don't want to archive them, but they keep appearing on standard f4 search on various transaction, We dont want personalise list , so is there a way we can eliminate this marked for deletion item from standard f4 search.
Your reply will be hightly appreciated.
Many Thanks
Sam Rathod

Can you please tell us how

Account marked for deletion

Hi,
i have one account marked for deletion, and this message " Account marked for deletion?" is displayed when i used it.
So please how to cancel that and make this account normal?
i hope you help
regards

Hi,
If you have marked the account for deletion you will get this message. But system will allow you to post. If you want posting to be prevented to this account you should block at company code and chart of account level in addition to marking for deletion. You can find the lock key just next to deletion key in FS00 t code.
You can goto FS00 and uncheck mark for deletion check box.
Regards
Santosh Hegde

HOW TO BLOCK THE PURCHASE ORDER AND MARK FOR DELETION ?

Hi ,
During the Creation of the Purchase order in the SAP System... After creation of the Purchase order should be blocked and a work item is created for the approver. If the Approver approves the Order then the Order is Unblocked and a mail send to the initiators inbox and the Order is Released. Similarly if the Approver Rejects the Purchase Order then its set for Mark for Deletion.
I did Po creation and release part. But i am facing problem during the Blocking & Unblocking the Purchase order. If he rejects i need to set for "Mark For Deletion". plz help me to solve this...

Hi,
You can use bapi 'BAPI_PO_CHANGE' to change the status of PO and for release use bapi BAPI_PO_RELEASE.
Hope this will help you.
Smit

Posting block and Marked for Deletion

Hi All,
My clients wants to know the vendors who are either marked for deletion or blocked for posting when was the date for the block or marking it for deletion and the person responsible.
Though i can see that one by one through Vendor master but i need to give this in report format.
Even with Fk04 i am not able to make out.Can you please help me out.Bit urgent

Hi,
You can check old value and new value by using table CDPOS.
If you want to know the time and person responsible by using table CDHDR
In table, put table name LFA1/LFB1 and required field like for field SPERR (LFB1) is for posting block for selected company code and field SPERR (LFA1) is for posting block for all company codes.
If you want to know it for specific vendor, then given vendor number in Object value or leave it blank for all items.
Hope it will be useful.
Regards,
Vinod

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

Can a PO be generated using Info record marked for deletion

Hello all,
Is it possible that PO be generated using Info record marked for deletion?
Observed that a info record is marked for deletion but still able to see a PO generated using this info record.
Is this becasue - PO can be generated untill info record is actually deleted from the system during next reorganization run?
What is reorganization run?
Regds.,
Chaitanya

Hello S. Iyer,
I have following queries -
1. What is meaning of your statement -
"If you want to restrict creation of POs against deleted info record"
Do you mean that info record is "deleted" or "marked for deletion"?
2. Any way, is there difference between two - "deleted" or "marked for deletion"?
3. Where in the info record I can see history of marking for deletion to see who and when marked it for deletion?
4. Observed that there is a message that comes up that info record is marked for deletion.
Is there indication on info record itself like - permanent record, tick mark to indicate that it is marked for deletion?
Regds.,
Chaitanya

Open Production Order with Mark for deletion

Hi
Friends again stuck in open production order
i want to calculate production order quantity for open production order,
only those production order which dont have mark for deletion.
I find a field in afpo XLOEK ..but it wont get reflects when done changes in CO02
Then i used the table JEST and i want to delete those aufnr which has deletion flag i wrote the folowing code pls do correct me where iam wrong .
IN this code deletes aufnr which are marked as deletion ?
SELECT afko~aufnr
       afko~gamng
       afko~plnbez
       afpo~dwerk
       afpo~psmng
       afpo~matnr
       INTO CORRESPONDING FIELDS OF TABLE i_afko
       FROM afko INNER JOIN
       afpo ON afpoaufnr = afkoaufnr
       WHERE afpo~dwerk = s_werks
      AND   afpo~matnr IN s_matnr
      AND afpo~elikz = space.
LOOP AT i_afko.
CONCATENATE 'OR' i_afko-aufnr INTO i_afko-aufnr.
MODIFY i_afko.
ENDLOOP.
IF NOT i_afko[] IS INITIAL.
SELECT jest~objnr
         jest~stat
         jest~inact
          INTO CORRESPONDING FIELDS OF TABLE i_jest
          FROM jest
         FOR ALL ENTRIES IN i_afko
         WHERE objnr = i_afko-aufnr.
ENDIF.
LOOP AT i_jest INTO wa_ijest.
IF wa_ijest-stat = 'I0076' and ( wa_ijest-inact = SPACE ).
    DELETE i_afko WHERE aufnr = wa_ijest-objnr.
ENDIF.
ENDLOOP.
i_afko1[] = i_afko[].
SORT i_afko BY matnr dwerk.
DELETE ADJACENT DUPLICATES FROM i_afko COMPARING matnr dwerk.
loop ....
calculate :quantity
endloop.
Regards and answers will be rewarded points

thnks
solved the problem
regards

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

How do I tell if a user profile is marked for deletion?

This is likely a question with a simple answer, but searching through Google and here hasn't helped.
How do I tell if a user profile has been marked for deletion?
Will it appear in the "Manager User Profiles" area of the User Profile Service Application management?
Do I need to look somewhere else?
This is probably obvious, and I just have looking disease, but your assistance is most appreciated!

As Paul said you can see that on UP admin page. also you can use powershell to get the list of all use in powershell.
Follow this blog:
http://iedaddy.com/2012/02/sharepoint-2010user-information-lists-and-user-profile-cleanup/
$upa = Get-spserviceapplication <identity>
Set-SPProfileServiceApplication $upa -GetNonImportedObjects $false
Set-SPProfileServiceApplication
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Mark for deletion and Discontinuation difference?

Similar Messages

Maybe you are looking for