Mark Search Results in Trex results for pdf

Hello Colleagues,
i perform a trex search and klick in the results.
When the result is a html document the trex marks the findings of the searched word in the document. When the result is a pdf document this doesnt works. Does somebody know a solution how i can get this feature in an pdf document?
Best regards,
Patrick

Hi Prashanth,
There are different possibilities:
On the one hand, the standard link is rendered as the displayname property with the modifier "contentlink", see http://help.sap.com/saphelp_nw04/helpdata/en/79/a1d23e6b2c3d67e10000000a114084/frameset.htm
This could be modified, but that would be a hard task.
I would suggest a dummy property (DisplayNameContentLink) which then could be rendered without the contentlink modifier and within the SearchResultList, only show this property. If the resource is a PDF, add the search expression (also some non-trivial task to access this!); otherwise render the "standard" content link.
Hope it helps
Detlev

Similar Messages

  • Restrict spotlight search results for pdfs

    I have a great number of academic papers in pdf format. Each paper has a title, an abstract, main text and a number of references. By default spotlight wouldn't distinguish the difference between these portions. But when I type the title of paper, papers that cite that paper also shows up, which is annoy, because I actually only want to locate the paper that has the title. I'm wondering if there is a way to restrict searches in only title, abstract, main text or references in academic papers of pdf format.

    Using a Finder search (command-F), which also uses Spotlight, you should be able to tailor your searches to file names as well as extensions, or other criteria.

  • What setting do I need to change to have a search result file (pdf. or whatever) open instead of automatically download?

    Firefox downloads files automatically when opening a opening a search result. What setting do I need to change to have the search result file (pdf. or whatever) open instead? Something changed yesterday and I lost the ability to open the files vs. download.
    == This happened ==
    Every time Firefox opened
    == July 7, 2010

    Hello,
    Normally, when I use my online account, when i select a document to open with excel or with adobe, the applicaiton installed on the PC, is used to open the files.
    Can you check the under control panel, default programs, and see what program  is associated to the PDF files?
    When you try to open one of those pdf files from your back, what happens?
    If you download them to the HDD, are they automatically associated to ADOBE?
    Thanks,
    I work for HP! Please remember to provide and if this helped click ON

  • Auto-refresh search result (for activities)

    Hi all,
    we've got a customer requirement to implement a auto-refresh function for the search result for activities, means, the search result table should automatically be updated every x minutes.
    In component BT126S_APPT, view layout ApptSQ.htm, I've added the following lines of code after the thtmlb:advancedSearch tag:
    window.setTimeout["document.getElementById('C16_W54_V55_Searchbtn').click();", 5000 ) ;
    This script "clicks" the search button 5 secs after the search page has been loaded.
    Now, the interesting thing is that this works two times, like starting the page -- javascript triggers first automatic search --search result updated -- javascript triggers second automatic search -- search result updated, but then the script isn't called ny more.
    Any idea about that?
    Regards
    Wolfgang

    Hi,
    Make use of af:poll component.........
    http://download.oracle.com/docs/cd/E12839_01/apirefs.1111/e12419/tagdoc/af_poll.html
    Regards,
    Suganth.G

  • Does Spotlight on Mac allow us to add a website to search results for Spotlight?

    Does Spotlight on Mac allow us to add a website to search results for Spotlight?

    In System Preferences>Spotlight you can check the box that includes Bing Web searches in the Spotlight search results.
    Also see:
    http://appleinsider.com/articles/14/10/24/getting-the-most-out-of-the-revamped-o s-x-spotlight-search-in-yosemite

  • Can we export search results in PDF format in OAF?

    Hi,
    Can we export search results in PDF format using export button in OAF?

    No. Only CVS format is supported right now.
    --Shiv                                                                                                                                                                                                           

  • Is there a way to remove the FormsCentral ad from a google search result for a form

    We have noticed that the google search results for our forms have the following:
    Raleigh-Wake Emergency Communications Center Customer ...
    https://adobeformscentral.com/?f=Rov-d68AFo2aQMaFxrAGvw
    This form was easily created for FREE with FormsCentral. ... The Raleigh-Wake Emergency Communications Center is committed to providing the best service ...
    Since we have a paid account, we would prefer that the red text not be included in the search result. Can this be removed?

    Hi;
    We're looking into what we can do for this. I'll post an update in the future.
    Thanks,
    Josh

  • Weird character in search result for HitHighlightedSummary property

    We have a INTEG search center and display managed property 'HitHighlightedSummary', which is a out of box managed property
    One of the results display as below in search result page:
    "Issue 9 brings us the latest news from the Home Oxygen Service team … Don't forget to read CorpNEWS next week to get the latest Home Oxygen Service update.  "
    Noticed that the last weird character? how does that happen? we have same setup in DEV env, but we don't get this issue, how to track down this issue.

    The Ascii code 8203 stands for line break :
    http://www.fileformat.info/info/unicode/char/200b/index.htm
    commonly abbreviated ZWSP ;  this character is intended for invisible word separation and for line break control; it has no width, but its presence between two characters does not prevent increased letter spacing in justification
    A third party editor may be adding them , if they are not originally present in your script/code.
    Are you using any such editor tools?
    It will be helpful to open a troubleshooting ticket with Microsoft so that we can look at the issue in more depth.
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/23804eed-8f00-4b07-bc63-7662311a35a4/why-does-sharepoint-put-in-character-code-8203-in-a-richtext-field?forum=sharepointdevelopment

  • How do you create a custom search result for surrounding suburbs for a real estate website?

    I have a Web App for property listings for a real estate website. There are item fields as follows:
    Suburb List:
    Edensor Park
    Hoxton Park
    Denham Court
    Cecil Hills
    Abbotsbury
    Surrounding Suburb List:
    Edensor Park
    Hoxton Park
    Denham Court
    Cecil Hills
    Abbotsbury
    Say a property is listed in Edensor Park as the main suburb and Hoxton Park and Denham Court are also selected as its surrounding suburbs.
    On the website's search form, the visitor selects, for example, Edensor Park. I need the search results to show everything listed in Edensor Park as well as in the surrounding suburbs of Hoxton Park and Denham Court. Is this at all possible?
    Thanks,
    Veronica.

    The Filter settings are sticky.  Every container listed on the Library tab of the Inspector keeps it's own Filter settings, set to whatever was last used.
    I'm not aware of any way to set a default Filter.
    You could create a Folder and put a Smart Album in that Folder with "Source" set to the Folder.  Any Albums or Projects you put in the Folder become the superset for the Filter you set in the Smart Album.  This is a pretty sophisticated set-up, however.  What is the filter you need, and how often do you need it?

  • Search results for podcasts not matching iTunes profiles

    There are podcasts on iTunes that have different titles and artwork in search results than their iTunes profile pages. For example, the podcast listing for LightTalk podcast: http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=333378833 displays the correct title and artwork, but when searching the iTunes Store for 'LightTalk', the artwork is missing and the title is incorrect (looks like the title is the author's name in the search results). This podcast was submitted to iTunes about 2 weeks ago. There are other podcasts having the same problem and suspect the problem is isolated to only new listings.
    This is a problem on both Windows and Mac versions of iTunes.

    I to have the very same problem! search results do not match the feed. Its been 1 Week now, i've added 2 more podcast since feed was submitted, the feed page works perfect, picture, artist, desciption, and updates within hours... perfect!
    The problem is how often dose the search index get updated?
    Regards

  • Why are my search results for mail incomplete?

    Why is it that when I search for emails that I KNOW are in my inbox I cannot find them? This never used to be a problem until I upgraded to Lion. My inbox has close to 7000 emails so it is not practical to manually search through it for an email that is several months old. Why are the search results incomplete? I find this extremely frustrating.

    Had the same problem- called applecare, a mail supervisor walked me through the easy fix-
    (I am no tech so this is in simple terms)
    (Assuming you just upgraded to lion) - the "library" was not "properly rebuilt" - the emails are there but are not fully queriable which is why the "recent" or "post upgrade" emails search properly while the "older" or "pre upgrade" ones don't- the library index needs to be rebuilt (which is much easier than it sounds)
    Steps
    1- Quit Email (fully)
    2- open finder, open "Go"
        Hold the "Option" key on your keyboard - this will expand the menu to show the "Library"
    3- Select the "Library" option, (you can now release the "Option" key).
    4- Open the following folders (Mail,   V2   , Maildata)
    5- Within the Maildata folder there are (3) files which need to be deleted (Trashcan them)
         (envelopeindex, envelopeindex-shm,  envelopeindex-wal)
    6- Reopen Mail / (This will automatically reimport these files,  takes some time depending on how many emails)
    7- Quit mail and Reopen (has to reload for some reason)
    8- The mail program will do some automatic sycronizing  (You will see some the files "Reappear / fill in" while Syncronizing
    9- about 100 (blank or garage or remant emails) loaded to the top of my inbox during this process but everything else was normal-
    Everything now works great 

  • Wrong Search result for Employee Resp.lD when searching Sales Order

    Hi All,
    Happy new year first of all,
    I encounter a problem when using search sales order in WebUI. I am using SAP CRM 2007 SP4.
    I notice that the search result by using Employee Responsible ID as criteria, is returning Person Responsible
    instead !
    I entered both partner function in sales order document (Employee Responsible => BP 1234 and
    Person Responsible => BP 4567).
    Although in Search criteria selection I choose Employee Responsible ID, but when I put
    the BP 1234, the search result is blank. And when I change the value to BP 4567, I can see the result
    shows that document. But BP 4567 is Person Responsible, how come it gives the result for Employee
    Responsible??
    This is totally wrong! I couldn't find SAP NOTE or same issue mentioned here in SDN.
    Did I miss it? Please kindly share your find out if you have same case or solution for this.
    Thank you and will be rewarded.
    Cheers,
    Gun

    Hi Robert,
    Which config are you refer to in SPRO ?
    Partner Function Determination ?
    By attention to the Relat. Category change, we can not simply change it (although it can fix this
    problem). I read the field info :
    In many cases this is predefined in the system, based on the partner function category chosen. You can assign the corresponding relationship type freely if:
    - you select the partner function category undefined partneror
    - you have yourself defined the relationship category to
    So did you try it? fixed the problem? or have you encounter further problem?
    Rgds,
    Gun.

  • Restrict F4 search results for specific plants / sales org / purchasing org

    Hello All,
    We have a project where a particular plant / sales org / purchasing org needs to be restricted because of the top secret data for that business.  We would like to be able to restrict the search results that are displayed based on sales org / plant / purchasing org in the F4 help.  If a user does not have access to the data / documents related a plant / sales org / purchasing org, we do not want the user to be able to see doc numbers, ship-to's, material numbers etc... My question is where do we restrict F4 results for the Sales and Distribution, Finance, Materials Management, Production Planning, Logistics, etc... modules?  Thanks in advance for the help.
    Jordan

    We can set authorization for specific plants and other organization levels,contact the basis team and discuss about the authorization

  • In WIndows 8, Google search results for Firefox (only) appear in a narrow column on the left of the window.

    Firefox (25.0.1) and Google worked well together until 11/26/2013 when a guest user searched on Google. Google search still works well on IE and Chrome. The problem is only on Firefox and only with Google. Bing, Ask, Yahoo, Wikipedia all perform and display as expected. No recent installs or upgrades. No other search engine returns results in a narrow column on the left. It is as if the guest user dragged the results to the left column and that display became the default. I can not restore the prior display. I have restarted Windows. I have reinstalled Firefox, but that has not fixed the problem. I have disabled all add-ons (I do not have any) and run in safe mode, The problem still exists. Appearance is Default 25.0.1

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.
    You can check the Properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).<br />
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.<br />
    Make sure that "Load this bookmark in the sidebar" is not selected.
    You can try these steps in case of issues with web pages:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Search results for Online Archive Limited to 250 results

    We are running Office 365 Pro Plus with Exchange 2013 CU4 on premise (nothing in the cloud).  When searching the Online Archive (with instant search or Advanced Find) within Outlook the results are limited to 250 items.  This is frustrating to
    people because we have email going back to 2006 so they are expecting many more results.   I understand the need to balance performance, but why is there not a way to override this limit?  I have searched but have been unable find a way - please
    let me know if one exists.
    Thank you, Jeff

    Hi,
    The behavior is currently by design with no immediately plans for this to change.
    Thanks for your understanding.
    Best regards,
    Belinda Ma
    TechNet Community Support

Maybe you are looking for

  • '$' in output device

    Hi! What does in mean when the output device starts with '$'? Thanks!

  • How do you convert from mp4?

    Hi everyone, I was wondering, I currently have an mp4 file that I wanted to convert and edit in Final Cut Pro 7.  But when I open the file in Quicktime and go to Export (Movie to Quicktime Movie,) I've tried four different conversion formats that all

  • Two spaces after a period

    Where would I modifiy my CSS to allow for the appearance of two literal spaces after each period in a paragraph. If you are typing body text, Dreamweaver appears to assume you only meant one space between sentences.

  • IMAP emails change to automatically read?...

    I've just set up my emails to come through IMAP, however when a new mail comes in, it changes to read automatically after a few minutes. Anyone know why? Thanks.

  • Where is smart print on the bar?

    I installed the Bing Bar for windows 7, Where is the smart print I don't see it on the bar? Thank you Roxanna