Mark/Space and Curve not Working

I am 1 month into my Curve.  I purchased Mark/space for its "seamless Sync" with MAC.  I have spent hours on this and am still not having any luck.  I was able to successfully Sync devices initially, however these devices no longer sync successfully.  A very long error shows up on my Macbook, and I have sent in a tech support ticket.  I would appreciate any assistance from experienced users.  I am running Leopard Version 10.5.6.

since it is within one year, then you should still have warranty left.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • Usb composite device is an older usb device and might not work in USB 3

    I recently bought one Lenovo Yoga 2 11 laptop running Windows 8.1 (64 bit).
    When I try to connect my old Brother MFC-3240C printer using USB (2.0), it doesn’t work.
    Below are the steps performed:
    Connected the printer to USB 2.0 port on laptop (on the right side). Automatically installed the printer driver (no exclamation mark beside printer icon)
    When the printer didn’t print, I tried to use troubleshoot as below:
    Control Panel->Hardware and Sound->Devices and Printers->Right Click on Printer Icon->Troubleshoot.
    It came up with USB composite device is an older usb device and might not work in USB 3.0
    Removed the printer and re-installed the driver. It is all the same.
    Any help will be greatly appreciated.
    FYI – the same printer works fine with my older laptops running Windows 7.

    Already checked Brothers website for the printer drivre for Windows 8.1 (64 bit).
    It says ... The built-in driver is already included with Windows® Operating System or is available through Windows® update.
    So, installed the default driver for the printer that is available with Windows 8.1.
    Even connected the printer with USB 3.0 port on the laptop, but it is all the same.

  • Webcam and bluetooth not working in my G570 on Win7 ultimate

    Webcam and bluetooth not working in my G570 on Win7 ultimate.Reinstalled the drivers.No avail.Web cam icon is not visible anywhere in the system.Only proof i have is there is a cam looking at me on the lid on top.Tried Fn+esc .did not work.Please help.......

    hey Nambiar,
    uninstall both webcam and bluetooth drivers from device manager. let windows install its generic drivers.
    once done, see if you're able to use it.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • Keyboard and mouse not working

    both keyboard and mouse not working. I have changed batteries and checked drivers  please help..  thank you
    This question was solved.
    View Solution.

    Thanks for the information, that is exactly what I needed.
    If you are having the enter issue when using the wired KB from your old computer that sounds software related with the blog site.
    What web browser do you use when on that website?
    Connect your wireless equipment back and if you continue to have the issue with the letters repeating then you should inquire about a replacement for what is referred to as "sticky keys".  With it being a new unit this shouldn't be an issue.
    Let me know if you have other questions.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator)

    Mac OS X 10.6.7
    CS 5.5
    When Firefox is open the zoom function (option/command/space bar) does not work in Adobe programs (InDesign, Photoshop, Illustrator). This happens only when Firefox is open and when I close it the zoom functions work fine again without having to restart the applications.
    This is intermittent but happens quite frequently each day if Firefox is active.

    MDN doesn't mention -chrome being used for ordinary web pages: https://developer.mozilla.org/docs/Mozilla/Command_Line_Options#Chrome
    When I use
    firefox.exe -chrome about:permissions
    I get a usable window, but zoom doesn't work as you noted.
    How about using an intermediate page and window.open() for the target page? You can (mostly) restrict the chrome of windows opened that way, but it will leave behind the intermediate window...
    https://developer.mozilla.org/docs/Web/API/Window.open

  • Keyboard and touchpad not working

    Good day My keyboard and touchpad stopped working all of a suuden, and I need help. My computer is Toshiba Satellite E55 A-5114, this has happened to me before but only the touchpad stopped working and it fixed whenever there was a system update, now I've updated the system and installed the recent drivers and still not working, any ideas?

     
    Satellite E45t-A4300
    There appears to be an epidemic. My guess is that a Windows update which changes a driver causes it.
    So turn off automatic update and inspect them one-by-one. They are offered on the second Tuesday of each month.
       Windows Update: Frequently Asked Questions
    I install only those marked Important or Critical. In particular, stay away from those which change a device's driver. Get driver updates only from Toshiba.

  • I buy a new compaq presario cq57 408tu but its bluetooth and wifi not working even installing driver

    i buy a new compaq presario cq57 408tu laptop , but its bluetooth and wifi not working even installing all driver

    Hey there. You didnt state what operating system you are using but I was able to find two articles that should help resolve your issue. 
    Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
    Fixing Bluetooth Issues
    These articles will go through all the basic troubleshooting steps. Let me know if this helps resolve the issue at all.
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • [SOLVED] Xorg and keyboard not working after upgrade.

    Hi guys,
    after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
    I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
    Any hint?
    How do you recover a system once it's gone like this? Many thanks in advance.
    J
    Last edited by ifsixwasnine (2013-12-23 13:58:16)

    WonderWoofy wrote:
    I wouldn't necessarily call this [SOLVED].  At best I would probably mention that you found a workaround.  The addition of '(downgrade)' likely makes it fine, but just FYI for future threads.  There are two reasons for this.  One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
    Just my 1.46¢
    You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
    Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
    The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
    1. Chrooted into the system
    2. Wiped /boot
    3. Re-installed grub
    4. Re-installed linux kernel
    5. Re-created grub.cfg
    6. ???
    7. Profit
    I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

  • Wireless network and bluetooth not working on touchsmart 600

    This has not worked since day 1 and I have been using wired internet.
    I really need to setup a home network and need to use wireless.
    Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
    Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
    Please advise  

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • My Ipod touch 4th generation is not working, its frozen, ive tried everything and its not working, its just frozen on an app and i really really need HELP!!!

    My Ipod is frozen!!! Its a 4th generation and its frozen on an app, Ive tried everything like holding down the lock screen and stuff and its not showing the red thing to slid to shut it down....This is my only thing to use to contact my friends and its not working, i dont have a phone and i cant get one, so this is the onlything i have.....PLEASE HELP!!!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    You should copy everything from your old comptuer to your new one.

  • Keyboard and Trackpad Not Working; Mac OSX Unexpectedly Quit?

    Hey everyone... I think I may need to stop by the Apple store to figure this one out, but I just wanted to make sure if there was anything I could do on my own first.
    So basically, on my MacBook Pro that I got nearly two years ago (late September of 2006) for the past month and a half has had problems. In the beginning, the mouse and keyboard would freeze up and just not work. Restarting the comp did nothing. Some times were worse than others (once it was frozen for 1.5 hours). Then it stopped, every now and then having a few freezes (sometimes when the keyboard froze but the trackpad was still good), but two days ago I had my comp not hooked up to an adapter. When the battery got low, the comp froze. I went to bed and closed the laptop, and the next day it was still frozen. I unfroze it, but then it happened again (I'm pretty sure the same situation... almost no battery)... and it is still frozen, even after multiple restarts.
    Also, during the time when freezes weren't as bad, sometimes the keyboard would get stuck on one key, usually the volume up button (very annoying)... then I was told to restart the comp. When I came back, I was told that Mac OS X had unexpectedly quit.
    Sorry that was a lot to read, but any help is really appreciated! Thanks!
    Not sure if this is also important, but I did spill some water on the keyboard a very long time ago (late December '06)... it wouldn't take this long for that to cause the problem, would it?

    Does booting up in [Safe Mode|http://support.apple.com/kb/HT1455?viewlocale=en_US] help at all? This boot mode checks the disk on startup and disables non-apple start up items and certain kernel extensions.
    Steve

  • While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

    Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
    If that does not work then see here http://support.apple.com/kb/HT1808

  • Hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either

    hi i have a ipod touch 4 generation 64gb and my camera is blocked and dose not work i cant update the ipod either

    Try:
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Since I downloaded the upgraded software, my charger that came with my phone says "this cable or accessory is not certified and may not work reliably with this iphone"  It worked before but now it doesn't...I don't think I should have to buy a new one...

    since I upgraded to the new operating system my charger no longer works...
    It says"this cable or accessory is not certified and may not work reliably with this iPhone"

    Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
    After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
    Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here.

Maybe you are looking for