Marker and color in a graph

I would like to change the color palette in a graph. How can I do it?
Also I would like to change the size of the markers in a graph, is it possible?
Pls. Help!!!

The easiest way to do this is to use another plot to either overlay the
other plots and draw points over the other plot, or behind the other
plots as a filled plot filled to inf or -inf.
Greg McKaskle
Nico wrote:
>
> Is there a way to draw the background of a graph in different colors,
> e.g. to mark the region of a ROI, or alternatively draw the points in
> varying colors?
>
> Regards,
> Nico
>
> --
> Nico Schmidt IPK/IWF eMail : [email protected]
> Sekr. PTZ 4, Pascalstr. 8-9 Phone : +49-30-39006342
> D-10587 Berlin

Similar Messages

  • Exporting to pdf with page marks and color separations

    Hi All.,
    I have a requirement to export the current document as PDF file. I am using the export provider with the service registry to export the document as pdf file. The code works successfully. Now I have a requirement where I need to save the pdf with color separations and page marks. First I need some information on what does page marks and color separations actually mean for a pdf file. And second I need to know how this could be achieved. Do I have to set some preferences? I have tried setting preference for color , bleed and it works. But I am not sure whether this satisfies the requirement. I would be thankful if someone would suggest me on the same.
    Thanks in Advance
    Vishnu

    Hi,
    In my experienced it cant, you can export it to pdf but you dont have the ability to make it fillable, unless doing it manually, from the exported pdf, install an Adobe Professional software to have capability to save data's.
    Regards,
    Clint

  • Size  marker  and time axis scatter graph

    1.Can we increase default size of marker in scatter graph?
    2.Also, for the time axis can we format the date to be able to show (mm/dd/yyyy) for all the values on axis rather than just the first one ?

    Hello,
    I still didn't find a solution.
    I can show the data in the bar graph or in line graph, but not in scatter graph. In the scatter graph, there could be set for x and y axis just number values.
    But is it really not possible to create the graph with time x-axis and number(or string) y-axis?
    Has our customer so special requirement? Or is there no answer because it's so easy?
    In the previous post, I've forgotten to write that my version is 11.1.2.1.0.
    Regards,
    Qjeta

  • What happened to adding crop, bleed, print marks and color bars to a document?

    I can't seem to find them anywhere... are they gone?

    You can create two types of trim marks in Illy CS6.
    For either, select all the objects you want within the trim marks. One type  is available from the Object menu and creates a group of the marks based upon the bounding box and are offset just as the marks are when you create a PDF.
    The second option is (again with the object(s) selected) is available from the effects menu. These are a live effect and change dimension as the art is resized. Using this option, Illy places marks around each and every object unless you group all the objects. Once ungrouped, the marks are removed. These marks are also aligned precisely on the objects' bounding box instead of being offset.
    Mike

  • By mistake I uninstalled my Acrobat someting, which gave me the opportunity to print .pdf and color-mark text. My licence key is [removed by moderator]. What is the name of the product? Where is the link for download and reinstall? Please help me r

    By mistake I uninstalled my Acrobat someting, which gave me the opportunity to print .pdf and color-mark text. My licence key is [removed by moderator - never disclose publicly]. What is the name of the product? Where is the link for download and reinstall? Please help me rapidly, Best regards / Stefan

    Sign in to your Adobe account online and look in the Plans/Products sections to see which program it might have been.

  • Lexical References for reports 9i (graph and colors)

    hi,
    1) i want to use lexical parameters for graph and colors
    like font,background,foreground,text and so on....
    for graph :
    width,height,x-axis,y-axis and so on....
    my reports are saved in .jsp .
    it is possible or not .if possible please help me.
    it's very urgent.
    2) I have created a report with graph at the beginning of the first page
    I got result with graph and corresponding data in tabular format and saved in .jsp file.
    Graph is shown at the beginning of the report as I desired followed by
    data.(i.e. First Page).
    From next page I am not able to get the data
    from the top of the page instead a gap with the size of the graph is available
    which is blank.
    I need to produce graph only on the first page and the other pages with just the
    data without a gap reserved for graph.
    with regard's
    vijay

    1) Yes, you can use lexical references in the generated graph XML (I presume that you're talking about 9i). However, this functionality is only available in patch 1 and above (patch 2 is now available, and can be downloaded from Metalink).
    2) Create a frame around the graph (and make sure that the graph is contained by the frame, i.e., move it forwards). Make the frame vertically variable.
    Hope this helps,
    Danny

  • How can i dynamically vary the color of one graph line

    I was looking on the developer zone and noticed several people are looking for a way to change the color of one graph line. Simplest case I would like to know: a graph is running, then you press a button and from that point on the color of the graph changes, but doesnt change the old data line color. THis way the line will consist of different colors.
    The property node changes the whole line, and the line is always just one color. It should be possible to make the line consist of different color sections, anyone know how?

    The application is actually not as slow as it seemed, i had some settings set wrong (anti aliasing in plot, and some functions in advanced, when you right click on the graph)
    Especially unchecking the anti-aliasing makes it much faster
    Also, just plotting point and not a line, or alternatively, changing the interpolation makes it faster.
    Anyway, the attached files do not rely on processor so much anymore, see for yourself
    Attachments:
    multicolor_looking_plot.vi ‏99 KB
    multicolor_looking_plot_2.vi ‏105 KB
    multicolor_looking_plot_3_truncated_array.vi ‏99 KB

  • HP LaserJet and Color LaserJet - Windows 7 support

    To help customers successfully use their products with Windows 7, HP has identified recommended drivers per product. Please visit the following support documents for more information:
    HP LaserJet and Color LaserJet - Windows 7 support
    Deskjet, Officejet, or Photosmart
    If you are having an issue with a windows 7 software install or driver, please start a new thread for greater visability.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

    Not to be confused with the title of this thread, because this tool will not work with installing most LaserJets, but try the HP Printer Install Wizard and let me know any error messages you get.  
    I will need to know quite a bit of information before I can be of much assistance, otherwise:
    1.  What error messages are you getting (ex. fatal error 1603)?
    2.  How are you trying to connect the printer (USB, wireless, etc)?
    3. What happened when you used the HP Print and Scan Dr?
    Lastly, If you do not answer these questions and others I know I will have, then I wish you the best of luck with your printer installation. Do not be mislead, just because I do not work for HP doesn't mean I'm not an expert.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Read a text file and display a xy graph

    Hi!
    I am using LabVIEW 8.5, and I am trying to read columns from
    a file and plot with xy graph. I can do it with two channels, but I am having
    problems when the numbers of channels connected increase (maybe six or ten).
    My text file looks like this:
    [Where first column x = time, the rest of the columns are
    channels = y]
    8.828        22.604        23.076            [The number of channels connected can
    change]
    9.828        22.604        22.604
    10.828      21.658        22.131
    11.828      22.131        22.131
    12.828      22.131        22.131
    13.828      22.604        22.604
    14.828      21.658        22.604
    15.828      22.131        22.131
    16.828      21.658        23.076
    17.828      22.604        22.131
    18.828      22.131        22.604
    I attached a picture of what I already try… Now I am trying
    a combination of those. If anyone has some
    advice or suggestion, please let me know.
    Sincerely,
    Julieta.
    Solved!
    Go to Solution.
    Attachments:
    xygraph.PNG ‏25 KB

    Thanks for the advice!... I just modified what I had a
    little bit and it is working, maybe is not the optimums solution…
    I would like to make the time invisible in the graph… It that possible? I attached a picture of my graph, because my English is not good.  There are two lines near to 22 (two channels
    connected at that moment), and a line near to 0 which is time (the strong pink one).  I would like to make invisible the strong
    prink one only.  I try to make invisible,
    but I fail… I changed colors looking for another solution and I fail again,
    because it is taking the colors that I choose for the channels.  I can not disable because I need it to make
    the x axes works with the time that I already saved. 
    If someone has an advice or suggestion I really appreciate it…
    Sincerely,
    Julieta.
    Attachments:
    xygraph.PNG ‏9 KB

  • Fade colors of intensity graph

    Hi everyone,
    I've made a program where I read an 2D-array and plot this array in a intensity graph.
    I was wondering if the colors in the graph can fade in each other, preferably in vertical position (columns). The idea is that the numeric data becomes visualized like a DNA profile.
    I've added a image of the plotted graph.
    Thanks.
    Solved!
    Go to Solution.
    Attachments:
    Intensity graph plot major.PNG ‏48 KB
    Intensity graph plot minor.PNG ‏35 KB

    Without manipulating the array, no it's not possible.  I made an idea on the Idea exchange to fix this, I recommend you vote for it.  Anti-Alias or Smooth Intensity Plot
    Like the idea says, see this post for workarounds.
    Tim Elsey
    LabVIEW 2010, 2012
    Certified LabVIEW Architect

  • Laserjet CM1415fn CMFP Black screen-question mark on screen-excalmation mark and dot flashing

    Hello everybody
    I've got a laserjet pro CM1415fn color MFP which seems to get power, starts up but suddenly the screen gets black and only the question mark is shown.
    Also, above the screen there are two indicators: An exclamation mark and a dot to its left, both of them blinking.
    Can anyone tell me what's the problem and how to solve it?
    Thanks in advance
    Jim

    hello,
    I got the same problem. could you fix it? 

  • Adding markers and color between the markers to a knob

    Fairly new Labview user.  I'm having trouble figuring out how to control via program the markers and colors on a knob.  Basically, I need a zero marker, and green between two markers where range of motion is permitted and red outside these markers where range is not permitted.  (This program is for a machine that measures a patient's wrist flextion). The positions of all markers (except the zero) needs to be programatically changeable for different patients, so I need to do it via property nodes.  The Labview help and menu system isn't helping me much.  Maybe you can.  Thanks.
    -joel

    Take a look at this thread for other ideas
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Coloring series in graph

    Hi Guru's,
    This might be a basic question. But still I could not find it myself. How will you give a color to different series displayed in graph. By default, I am getting red color both to my history series and forecast series. There is no differentiation. How do I configure to get a different color in the graph for forecast.
    Thanks in advance
    Ramkri

    Hi Ram,
    Have you not tried it in
    BM- configuration - configure series - 'select respective series' - goto 'display properties' - change display color of the graph.
    Tks
    MJ

  • Is it possible to change a marker's color after the fact in Prelude???

    I absolutely love Prelude as a program for logging my footage. I have a number of markers that have different colors but I'd like to know if it's possible to change a marker's color after it's been made. I know that this can easily be done in Premiere, but why not in Prelude???
    In Premiere you can easily change a marker's color even way after after the marker was made...
    ...so why can't you change a comment marker's color in Prelude?
    Conversely, why is it that Premiere doesn't respect the marker colors made in Prelude and instead defaults them all to green? This should be addressed in the next update.
    Otherwise, there's no reason to have multicolored markers in Prelude if they all get changed to the default green once they appear in Premiere.

    I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
    stage, as nobody has answered, I would recommend that you call Intune support.
    You will find your local Intune support number here
    http://technet.microsoft.com/en-US/jj839713.aspx
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • Help Needed : Changing the Color of Bar Graph Dynamically

    Hi..
    Is der any body to help me out...?
    My Question is :- How to change the color of Bar graph Dynamically..
    For example (Assume when one of the Bar Graph crosses certain limit of Y axis value mentioned, the graph must be changed into RED color)
    Thanks in Advance
    Edited by: user12873839 on Mar 30, 2010 10:03 PM

    Manoj,
    You have to create the entire chart manually. follow the below steps. You can refer to the anychart website for more help on different tags and features.
    1. Enter the following code in the html header of the page
    <script src="#WORKSPACE_IMAGES#AnyChart.js"  type="text/javascript" > </script>2. Create an ON Demand Application process by going to the Home>Application Builder>Application #>Shared Components>Application Processes
    3. Click On Create
    4. Enter the name as DYNAMIC_BAR_GRAPH_CHART
    5. Select the processing point as On Demand
    6. Click on Nxt
    7. Enter the following code in the processing text
    DECLARE
    BEGIN
    OWA_UTIL.mime_header ('text/xml', FALSE);
    OWA_UTIL.http_header_close;
    HTP.p ('<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>');
    HTP.p ('<anychart>');
         HTP.p ('<settings>');
              HTP.p ('<animation enabled="True"/>');
         HTP.p ('</settings>');
      HTP.p ('<charts>');
       HTP.p ('<chart plot_type="CategorizedVertical">');
         HTP.p ('<data_plot_settings default_series_type="Bar">');
              HTP.p ('<bar_series>');
                        HTP.p ('<tooltip_settings enabled="True">');
                        HTP.p ('<position valign="Top" halign="Right"/>');
                        HTP.p ('<format> Name: {%Name}');
                        HTP.p ( 'Value : ${%YValue}{numDecimals:0}');
                        HTP.p ('</format>');
                        HTP.p ('<font bold="false"/>'); 
                        HTP.p ('<background>');
                        HTP.p ('<corners type="Rounded" all="3"/>');
                        HTP.p ('<border type="Solid" color="DarkColor(%Color)" thickness="2"/>');
                        HTP.p ('</background>');
                   HTP.p ('</tooltip_settings>');
              HTP.p ('</bar_series>');
         HTP.p ('</data_plot_settings>');
         HTP.p ('<data>');
              HTP.p ('<series name="series 1">');
               FOR cThis IN (select table2.name, table2.value
                                  from table1,table2,table3
                                  where table1.T1ID = table3.T3ID
                                  and table2.T3ID = table3.T3ID
                                  and table3.C_ID=1
                                  and table3.A_ID=1
                        ORDER BY table2.name )
              LOOP
                   IF cThis.value > 90 THEN
                        HTP.p ('<point name="' || cThis.name || '" y="'|| cThis.value || '" color="red"/>');
                    ELSE
                        HTP.p ('<point name="' || cThis.name || '" y="'|| cThis.value || '" />');
                   END IF;
              END LOOP;
              HTP.p ('</series>');
         HTP.p ('</data>');
         HTP.p ('<chart_settings>');
              HTP.p ('<title>');
                   HTP.p ('<text>Chart Title</text>');
              HTP.p ('</title>');
              HTP.p ('<axes>');
                   HTP.p ('<y_axis>');
                        HTP.p ('<title>');
                             HTP.p ('<text>Value</text> ');
                        HTP.p ('</title>');
                        HTP.p ('<labels>');
                             HTP.p ('<format>${%Value}{numDecimals:0}</format>');
                        HTP.p ('</labels>');
                   HTP.p ('<axis_markers>');
                   HTP.p ('</axis_markers>');
                   HTP.p ('</y_axis>');
                   HTP.p ('<x_axis position="Normal" align="inside">');
                   HTP.p ('<labels display_mode="Rotated" rotation="90" align="inside" />');
                   HTP.p ('<title>');
                        HTP.p ('<text>Name</text> ');
                   HTP.p ('</title>');
                   HTP.p ('</x_axis>');
              HTP.p (' </axes>');
         HTP.p ('</chart_settings>');
        HTP.p ('</chart>');
      HTP.p ('</charts>');
    HTP.p ('</anychart>');
    htmldb_application.g_unrecoverable_error := true;
    END;8. Click on Create Process
    Now we will create a html region to display the graph.
    9. Create a new region of type HTML on the same page and select the region template as no template.
    10. Enter the following code in the region source
    &lt;div id="DynamicaBarGraph"></div>
    &lt;script type="text/javascript" language="javascript">
    function DynamicaBarGraph()
    var DynamicaBarGraph = new AnyChart('/i/flashchart/swf/AnyChart.swf');
    //    DynamicaBarGraph.width = "400";
    //    DynamicaBarGraph.height = "400";
    DynamicaBarGraph.addEventListener('pointClick', onDynamicaBarGraphClick);
        var DynamicaBarGraphData = new htmldb_Get(null,$x('pFlowId').value,'APPLICATION_PROCESS=DYNAMIC_BAR_GRAPH_CHART',0);
        gReturn = DynamicaBarGraphData.get();
        DynamicaBarGraph.setData(gReturn);
        DynamicaBarGraph.write("DynamicaBarGraph");
    function onDynamicaBarGraphClick(e)
    // Read point name
         name=e.data.Name;
    // Read point value
         value=e.data.YValue;
    // You can add onclick even here using the values name and value
    DynamicaBarGraph();
    </script> Hope it helps. Thanks.
    Regards,
    Manish

Maybe you are looking for