Marker chart in WEBI

Post Author: lavanyakumar1984
CA Forum: WebIntelligence Reporting
Hi
       I need to display Markers (Point where the X and Y axes coincides) in the graph
      Is it possible in WEBI?
     Is it possible to create combinational graphs in WEBI like Area Line, Markers chart etc. Apart from Bar and Line.
Lavanya Kumar

Hi Arijit ,
I want to create a Stacked bar and line combination chart in Web I B0 XI 3.1 SP5.
I want to show category wise sales in stacked bar and ASP in the line in same chart .
please tell me how to create stached bar line chart in Web Intelligence
Thanks ,
Charu

Similar Messages

Mark of the web/template problem

I created three Dreamweaver Templates for my site. I inserted the mark of the web code to each template to allow me to test and preview pages without the pop-up messages. All of my pages are about done and some pages using spry and SWF files weren't previewing properly in IE so I decided that it was time to remove the mark of the web code from the templates. As soon as I tried doing this I got a message about data outside the HTML tag and if I continue changes to pages based on this template will not occur unless you insert the following code .
So I hit continue. I got a couple of other error messages telling me I did something wrong. I went back into my template and typed in the code Dreamweaver told me to enter. I saved the template and got some more errors. I didn't think to copy it all down at the time. So after all these nasty messages I'm not sure what's happened. So I make some changes to a horizontal spry menu and hit save. I get some more error messages about the changes will not affect pages based on the template. I have to cancel out of a couple of error dialog boxes. I load a few pages that were based on the template and see that none of the changes that I made to the spry menu on the template are reflected on the html pages created from the template.
So I go into the template and try deleting all references to the mark of the web code. Then I try changing the CodeOutsideHTMLisLocked="true"--> to "false." That didn't work. Then I tried deleting the entire line  thinking that if I just got rid of all of it that it would fix my problem. No such luck.
So now I start searching online for answers and I see some things about attaching and detaching templates. Okay, so maybe if I detach the template and then re-attach it everything will update. When I follow the instructions to do this I learn that the page is no longer attached to a template. That would explain why my changes in the template aren't updating the other pages. So then I try re-attaching the template. I open the assets panel, click on templates, select the template, and then click apply. Nothing. It won't let me attach a template. Template properties shows no template properties available.
Here is some of the code from of a page based on the template two_column.dwt
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>ONA</title>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<meta name="Description" content="This page contains images of some of the former employes of Overseas National Airways." />
You can't see it the code I pasted but everything after 1999/xhtml is grayed out and you can't edit it.
So now I'm totally confused and have no idea what I need to do to straighten this mess out.

I thought I'd update this discussion and close it out. The reason why my pages weren't updating was because I
was using a template improperly. I had made the menu editable, which you're not supposed to do. The whole mark of the web issue was unrelated to my problem.

Issue with Mark of the Web, PDFs, and merged WebHelp

I'm sure this has come up before, but I can't locate the definitive answer.
I am using RH8 and have a merged WebHelp system containing a parent projects and 10 or so child projects. Previously, when I generated the WebHelp projects, I selected the Mark of the Web check box for the parent and all the children. Everything seemed to work fine.
Now, I've been asked to create a new child project with links to a large number of PDF files. After reviewing the documents on this forum, I realized I needed to (1) unselect Mark of the Web to see the PDFs in the generated output and (2) change my IE settings to Allow Active Content to Run from Files on PC. Unfortunately, while I can now see PDFs just fine, my merged help is no longer working correctly--the link from the parent topic to a project generated w/o Mark of the Web no longer works. That is:
If Mark of Web selected:
     PDFs don't work
     merged help does
If Mark of Web not selected:
     PDFs work
     merged help does not
How can I make everything work?
Thanks.

Are you testing locally?
Have you tried after publishing to the server? If not do so as that will likely make the difference.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Line chart in WEBI

HI
I have vertical stacked line chart in the webI report and I have no issues with the values and Line chart is perfect, but with in the chart user want's a standard horizontal line perpendicular to Y-axis at value 40. No matter what ever is the prompt value but this standard should be always display at value 40.
I have gone through the properties very well but still not able to recognize?
Thanks,

Hi Arijit ,
I want to create a Stacked bar and line combination chart in Web I B0 XI 3.1 SP5.
I want to show category wise sales in stacked bar and ASP in the line in same chart .
please tell me how to create stached bar line chart in Web Intelligence
Thanks ,
Charu

How to show negative value in Pie Chart from Webi?

I have below example data, I want to convert this to a pie chart in Web Intelligence, my problem is after I convert it to a pie chart, the revenue '-30' is shown as '30', looks like the pie chart is not suppor the negative value to show, I want to know if there is any workaround or solution to make the pie chart to show the negative value? Is this behavior is by design? do we have any official document to explain this?
The product I used is BOE XI 3.1 SP3.
Department    Revenue
A                      100
B                       -30
C                        80
Edited by: Alex Wang on Jul 13, 2010 5:51 PM

Why are you showing this information as a pie chart? It doesn't make sense to try and display a negative slice in a pie chart. I can't really think of a logical way to try and draw a negative slice in a pie chart. With a pie chart you will need all your information to either all be positive or all negative, otherwise it doesn't work.
What you need is to have a bar chart, with positive and negative values on the y axis.

Display the value as percentage in pie-chart in WEBI

Hi Experts,
   I have two measures No. of Sales Transactions and Customer Visit. And I created a measure named CustomerConversionRate.
ie, CustomerConversionRate = ([No. of Sales Transactions]/[Customer Visit])*100.
So my requirement is that CustomerConversionRate is to be display into a pie chart in WEBI . CustomerConversionRate always a percentage.I
hereby attached a sample pie-chart based on my requirement.
Eg:CustomerConversionRate=79.27 and Remaining = 20.73
I want to display CustomerConversionRate=79.27 and Remaining = 20.73 into a pie chart in WEBI

Hi ,
Add 1 more Query with dimension that will have values
Completed      Or      X
Remaining      Or      Y
Duplicate your Query And Keep only 1 Dimension [Extra_Dim]( Remember this Dim Name you have to use it in different way so it would be better if use any Dimension which is not there in First Query )
Go To--> View Script --> Custom SQL
write below code in Query Script Editor
SELECT
'Completed' As "CATEGORY"
FROM
"YOUR_TABLE" Table__1
Union
SELECT
'Remaining' As "CATEGORY"
FROM
"YOUR_TABLE" Table__2
And Save this Query .
Now Rename this Query as Pie Dimension .
Now You can Use [Extra_Dim] As [Achievment_Status]
Create Measure Variable [Achievment_Val] as mention above .
And use it

Special Characters in charts with web reports

Hello, we are facing a problem to display special characters in charts on web reports (it comes out badly).
The only sap note found about this problem is note n°1036745, but it is for NW 2004s, but should be solved in NW04s BIJava SP 12, and we are currently with SP 15.
Has anyone faced this problem with BI 7.0?
Thanks,
Philippe

hi Philippe
I did not faced this issue. Nevertheless there is another note dealing with the issue. Note 1088411.
Take into account that your basis should synchronise the level of BI JAVA SP the famous Java Stacks and BI SP (ABAP support package).
You say that you are SP 15 I guess it is ABAP SP as SPS for 15 is not already shipped,
if this is not the case please ask your basis to check tihs note 1013369.
Hope this could help you
regards
Boujema

Top 10 Pie Chart in Webi 3.1 with "Others"

Hi,
I need to implement a Pie Chart in Web Intelligence 3.1., which must show the sales values only for the Top 10 countries with the highest number of sales.
However there is an extra requirement: I must include the option "Others" including the other countries (from 11th to the last).
I've been searching but I have not found any solution. Does anyone know the way to achieve this requirement? Using a Pie Chart is mandatory.
Thank you in advance!!

Hi,
you may refer to the following links:
Consolidating dimension values under the tag "All Others"
http://scn.sap.com/thread/3390881

Create combo chart in webi

Dear experts,
Is it possible to have a combo chart in webi? By combo I mean having mixed a bar and line chart.... I would have a primary Y axis used by the bars and a secondary Y axis used for the line.
If it's possible could you explain to me how to achieve it.
Thank you!
Cheers!
Inê

Hey Inês,
We can do it by using Bar & Line chart types.
Go to Templates:
Charts:
Vertical Bar & Line chart
Horizontal Bar & Line chart
etc...,
It gives you a chance to show Two Y-Axis
Gracias...!!

Mark of the Web and Explorer stupidity

So, we are working on a very clever little program that acts as a browser independent bookmark util, and strips Google's tracking data. It's not a screen scraper. It's a bookmark utility.
It can also download images to local files.
As a browser independent util, bookmarks are written to html pages. We want an OnClick open in new window aspect. This is to reduce the number of opened browser pages\tabs and also to allow an easily returnable window handle to the Window that we
open for the bookmarks.
Works great with FF and Chrome and older IE. Newer IE on Win Vista 8.x does not open in new window. Opens links in tabs which (as we all know do not adhere to Microsft's Windows Hierachy Rules) so we can't use the db app to find the originating
Window, and therefore have to open a new one on the next Open Bookmarks call. hwnd values do not work with tabbed browsers, so don't suggest that. Neither does inspecting every running process for the process thread and backtracking, so again,
no lame ass responses, please.
If we add the poorly documented Mark of the Web tag to the page, then yes, we can open pages or images on the web in a new window. BUT, not locally stored files even with fully formed paths.
This is ridiculous.
In other words, an image on a site that may be compromised is now 'secure' using MotW, but a local file is not?
What moron at Microsoft thought this made sense? How the hell do you justify locking down a local file but leaving a web based one exposed? MSIE's security protocols get more ridiculous with every new wet behind the ears hire kid that you bring
on board. You guys apparently are big on rules that have zero real world application value.
Explain, please, (without the bullshit icacls Dos cmd run as admin), how a user is allowed to link to file on their own computer's hard drive, which I may add, they paid for - you did not - especially when we have, on download, checked the correct file sig,
to make sure it is valid.
As it stands, we are thinking that we should just give up on fixing IE's constant issues and just advise users to install FF.
I await answers that are competent.

I appreciate the offer to help, Rob, but this has nothing whatsoever to do with domains, pop-up blocker settings or anything of such a basic nature. Neither is this about css or scripting. It is about Microsoft's stupidity pure and simple.
And, btw, I am a pro.
However, I have now resolved the issue to large extent, and am happy to report that I can now use code to elevate permissions at will. I can also now hide content in files, including hiding binaries in simple text files. If Microsoft were not so
dumb, I wouldn't now know all this or have a need to know.
Here's something for you to ponder, assuming of course that you are a professional.
Create an htm page, with a link to link to say a text file or image file that you created. (So you created both the htm and the target file).
You want the target to open in a new window. Not a new tab. You want the new window to be re-usable. So you add a simple OnClick - New Window instruction to the href.
MSIE freaks out when it sees the Onclick instruction and delivers a restricted Script/Active-X message.
There are no script <> tags on the htm page - they are not needed, and there are no active-x controls.
This is a local page, not on a domain, not on the web.
If we tell MSIE to allow, it will open the page but ignore the new window instruction. (and of course, when we reload the page, we go through the same bull-crap again).
So we find that we have to add the bogus Mark of the Web tag. We do that and now the links do NOTHING. No error message, no explanation. Just NOTHING.
We find that we need to either add a Low Security specifier via icacls or use an Alternate Data Stream to add hidden clandestine values. If we use ADS, simply using the local Intranet zone, it fails. So, we have to pretend the file was from the
web, even though it was created locally and add an ADS to that effect.
All of this, just to link to a file that i created, on my PC.
The problem is that MSIE recognizes MOTW for the Onclick, but not for link handling. Very Dumb.
Since MS are strong advocates of ADS, why does MSIE not just write an ADS tag to say 'user says this file is okay'. Or, even obey their own rules for MOTW. Very Freakin Dumb and lazy coding.
So, because I had to jump through hoops and learn about crap I had no interest in, for something this simple, I now know how to do lots of stuff that some may consider dangerous, although it never occurred to me before. This has been a constant theme
with Microsoft. I learn more about how to hack a system than comply, simply coz MS is lame with documenting or does something as dumb as this.
So, thanks for the response, I have it handled. Although I saw about 30 questions from non pros asking why their picture of little timmy won't open, and am sure it has to do with hidden ADS and permissions, I just love how nearly every response from an
mvp is to reinstall msie.
Years ago I used to participate in ms security & db forums. Never ceased to amaze me how mvp types would always have people reinstall everything. Is that the first thing they teach in MVP school?
btw, as far adding a local folder to local intranet zone, can't be done. Of course it does not help that the little MSIE dialog is wrong with their examples, and has been for at least a decade.
Regards,
Gary

Blue question mark on some web pages

hi i am getting blue questions marks on some web pages. like..... TheAVENUE.com i see the start page, and i see the pictures there, but when i go to click an link like sweaters, and the sweaters are suppose to pop up i see the blue question marks. this only only happens on a fewweb pages. any idea whats going on?
thanks

thanks for your help, I called my internet people. and they are having the same issues. they are guessing they company is blocking us from viewing it. It happens alot though. My husband is in the military and we are stationed overseas. I will have to call them and let them know they are blocking our Ip addresses

Mark of the web

I intially thought that it was my computer that had a problem
until clients gave feed-back that they were getting the same
problem.
This is the pb:
when I include the mark of the web on the webhelp output (or
webhelp pro), when the help system opens the following error
message is systematically displayed:
"A runtime Error has occured.
Do you wish to Debug?
Line: 225
Error: Access is denied"
After a bit of debugging, it seems it the WHUTILS.JS file
that is affected. Apparently the msxml3.dll cannot be accessed and
that generated the error.
I tried all the possible fixes from the net for msxml3.dll,
and nothing seems to be giving me a solution.
I am working with XP SP2 with IE7 browser and using RH6.
Any ideas?
Many thanks,
Chris

Hi Peter,
Thanks for your reply. I sort of recall having this
conversation with you a while ago. Indeed I realise that webhelp
and webhelp pro outputs are different in nature: I use the webhelp
output to place the local help system on the disk that we deliver
to the client and place the webhelp pro output on the server with
the RoboHelp server for our customer support site.
Both outputs are compiled in clearly distinct folders and
there is no overlapping between the two.
The reason why I mentionned both outputs is because I am
getting the same type of pb with the same symptoms when adding the
mark of the web. Naturally, for the webhelp pro this does not
matter as I do not add the mark of the web for server based help
(which makes me wonder why Adobe has added this option for this
output and more importantly, why it is selected by default) but
just mentionned in order to indicate that this is not specific to
the webhelp output.
This said, my point was that when adding the mark of the web
option, I get the error described above whereas when it is not
added, everything works fine (apart from the fact that the active
content is blocked and the user has to explicitely allow active
content to be displayed). Therefore it seems that the inclusion of
this option is generating some type of error and I hoped that
perhaps someone else had encountered it and found a workaround as I
am unable to find a viable solution to this.
-Chris

HTML5 and 'Mark of the web'

Are there any plans to add a 'Mark of the web' option for Responsible HTML5? Without it, end users using Microsoft Internet Explorer must set a security option to 'Allow active content to run on My Computer.' I know alternatives are to use Chrome or host the Help system (or ask end user to set up a web server in which to host the Help system), but neither of these workarounds are options at the present time. Thanks for any help you can provide.

If you go to the index page of your output and edit it with notepad you can manually add the MOTW. Mark up is shown below.

It is a time saving device for when you are not loading the content from a website. When loading from a website the browser can see where it is coming from. When running it off your local hard drive the browser cannot see a URL and blocks the content. MOTW is placing an instruction into the web page telling the browser it is from the internet. I have exactly the same issue when using other Authoring tools so use this when I want to test on IE. Other browsers do not require this mark up.
Regards
Dee

Waterfall Charts in Webi

Hi All,
Does anyone know how to create a Waterfall Chart in Webi... it is not a standard chart type in Webi, yet it is possible in Crystal Reports or Xcelsius...but I need a Webi solution to this chart type.
Any ideas on how to create this in Webi will be welcome.
Thanks
Jacques

1.Create a table in DB with 2 fields, CONCEPT and YEAR. Feed it like this:
   INCOMES                    2009
   DIRECT EXPENSES     2009
   INDIRECT EXPENSES 2009
2.Include this new table in Universe and link it with FACT_TABLE.YEAR ===> NEW_TABLE.YEAR
3.Create in universe 3 objects: Concept (dimension) Visible(measure) NotVisible(measure)
4.The query of these objects will be:
   a)Concept : NEW_TABLE.CONCEPT
   b)Visible: sum(DECODE   (NEW_TABLE.CONCEPT,'INCOMES',FACT_TABLE.INCOMES,
                                                                                'DIRECT EXPENSES', FACT_TABLE.DIRECT_EXPENSES
                                                                                'INDIRECT EXPENSES', FACT_TABLE.INDIRECT_EXPENSES))
c)NotVisible: its the same concept as Visible, here you have to think like this..."If CONCEPT is x, whats under it (abc)? if CONCEPT is y what´s under it? (def)
We have created 2 measures, visible will be colour blue and invisible will be white. Change the order of colours in the palette of data (properties of the graph)
5.Now just create a stack bars graph and add these new 3 objects of universe (Concept, Visible, NotVisible)
You will have to tune the order of position of measures, to quit backgroud colours and these things to simulate the effect of waterfall chart.

Generate fails with Mark of the Web

Warning new Rh user
With that disclaimer out of the way maybe someone can help me
figure out this problem. It isn't critical. I am actually running a
trial version of Rh7 on an offline laptop and using a tutorial
document to try and learn the tool.
The laptop is using IE7. One of the scenarios is to generate
WebHelp SSL with and without the 'mark of the web' setting.
When the setting is unchecked I receive the warning about
scripts and ActiveX, but my Help content is displayed and I can
navigate through it.
However when I check the 'mark of the web' option and
generate my SSL even though the warning no longer is displayed I
only see my default topic and no other content. The tabs (Content,
Index, Search) display but do not have any content or function. I'd
appreciate any help or guidance.

Well Peter the result is the same (no content) but I do
receive a different message stating my security setting do not
allow websites to use ActiveX controls installed on this computer.
I guess I can go back and talk to my MIS folks.
Thanks

Marker chart in WEBI

Similar Messages

Maybe you are looking for