Marker window empties after placing In/Out in MC clip (CC)

(Premiere Pro CC on OSX 10.8.5)
We have interviews shot on three cameras. We synched all three using in-points and made a multicamera clip using "Make multi-camera source sequence."
We then placed markers (with durations) on the MC clips and placed text in them by using the Markers window.
So far so good.
Then the problem arises. When I place an In or Out point on the MC Clip, the markers and text disappear from the Markers window. The only way I can get them to show back up again is by clicking on the Source window. Then as soon as I place another In or Out point, they disappear again.
WTF?

I found a workaround: deselect the multicam sequence in the Project panel before working with it in the Source Monitor. More explicitly:
Load the multicam sequence into the Source Mon.
In the Project panel, single-click any project item other than the multicam sequence that's now loaded in the Source Mon.
In Source Mon, work with markers and In/Out points to your heart's content.

Similar Messages

AME import window empty after AE project converted to CC 2014

Running Mac OSX 10.9.4, I have After Effects CC, and CC 2014. I have Adobe Media Encoder CC, and CC 2014.
I have been working in AE CC on a composition and encoding it in AME CC 2014 without this issue.
This morning, I converted the project (.aep) to AE CC 2014, made some changes, removed all unused footage, and saved as a new filename. I am very stupid.
Now when I open the new filename in AME CC 2014 it says "Connected to dynamic link server" but shows nothing in the Composition window and has no active progress bars. Therefore I cannot select my composition and render it, only click cancel.
I get the same result after closing all open applications, restarting the machine, and using AME CC instead of 2014.
I can reopen the .aep file and see all the compositions.
No error messages.
No warning signs.
Just missed deadlines, angry customers, and excuses why I can't do what I said would be possible a few hours ago.
Anyone know a solution?

What happens when you use the Add To Media Encoder Queue command in After Effects?

ITunes 10.1.1 for Windows XP, after install errors out with messages

Installed iTunes 10.1.1 (released Dec. 15) for Windows XP 32-bit. Tried to start it but got error message as follows:
1) "This application has failed to start because VideoToolbox.dll was not found. Re-installing the application max fix this problem."
2) Then another errors pops-up:
"iTunes was not installed correctly. Please reinstall iTunes".
Error 7 (Windows error 126).
I de-installed and re-installed iTunes about 8 times, including restarting the computer and no resolution.
Today I downloaded iTunes again from the web site and it still has problems.
Any ideas on how to resolve this problem?
Thanks!

Taken at face value, you've got trouble with an Apple Application Support file. (iTunes needs a properly functioning Apple Application Support program file in order to work correctly.)
I'd try the instructions from the following post. Although it's for 32-bit Vista/7, it's pretty much identical for XP ... just read "Uninstall a program" control panel as "Add or remove programs" control panel, and "Computer" as "My Computer".
http://discussions.apple.com/thread.jspa?messageID=11901253&#11901253
Message was edited by: b noir

In options, checking a new tab instead of the default a new window. After shutdown & restart FireFox returns to the w/no check mark. Can I save the check mark?

After a computer restart, Firefox always defaults in Options, Tabs, 'Open new windows on a new Tab' unchecked. After checking the box Firefox will then open new windows in a tab instead of a new window, However after a shutdown of the computer the check mark is gone and must be rechecked. Is there a way for Firefox to remember the check mark when the program is restarted?

hello gearjam, first of all it appears, that you're using an outdated version of firefox with various known security vulnerabilities - please [[Update Firefox to the latest version]] as soon as possible to stay safe while you browse the web.
regarding the problem you're observing, please make sure that no extension in firefox > addons > extension with the functionality to change tab settings is interfering here - or if this is not the case, go through the steps described in [[How to fix preferences that won't save]].

Signature drop down menu greyed out. I believe it is because I saved the pdf document after placing a signature. I'm using Adobe Acrobat Pro 9

signature drop down menu greyed out. I believe it is because I saved the pdf document after placing a signature. I'm using Adobe Acrobat Pro 9

Do you mean the drop-down list that shows up when you right-click on the signature (in the Signature Panel or signature field)?
I do not think that just saving a PDF with no changes would result in that unless you somehow flattened the PDF.
Can you see the signature in the Signature Panel? Can you expand ([+] at left) the signature? Does the Signature Panel provide info for this signature? Is the signature validated? If "yes" then is the signature status Valid?
It could be that when you saved the file you somehow flattened the signature, so that now you have only signature appearance in the PDF but not a real signature field which contains all signature properties. If the Signature Panel does not contain your signature (enpty if your signature was the only one) then this is the most likely cause.

Photos in Windows Explorer folders marked as empty

I am using Windows 7 64 bit. My photos are readily available in the appropriate folders when I look at them within Lightroom, Browser or Photoshop. But if I open Windows Explorer, those same folders are marked as "Empty." This did not happen until I added Lightroom 3 and imported all of my photos. They are not marked as hidden either under properties. What happened?

When importing, LR can add photos from their existing location or it can move the photos somewhere else. Are you sure you're looking at the same place in both LR and Explorer?
A test would be to right-click on one of the photos in LR and choose Show in Explorer and see where it opens Explorer.

How do I restore my passcode (not password) in my iphone5s. It's the one that is asked whenever you have to unlock the phone. I got used to having my thumb mark open it that I forgot it after my phone got recharged after it drained out.

how do I get my passcode (not password) in my iphone5s sent to me via email. It's the one that is asked whenever you have to unlock the phone. I got used to having my thumb mark open it that I forgot it after my phone got recharged after it drained out. Apparently, the fingerprint won't do after the phone was drained and recharged again. The passcode has to be typed in. I don't usually allow my phone to drain out except this one time on a long trip. Hence I forgot my passcode and I prefer it being sent to me via my registered email. I know that if you enter it several times, the phone gets locked out over certain periods from 1 minute to 60 minutes so I don't want to take that risk. Any suggestions?

First, this is a user-to-user technical support forum, not a way to communicate with Apple.
That aside, no one can email your passcode to you because no one (not even Apple) knows it. The passcode exists in only one place - on the phone. You will have to restore the phone using the computer that you regularly sync it to. This will reinstall iOS, remove the passcode, and restore your most recent backup.
Edit:
See: iOS: Forgotten passcode or device disabled after entering wrong passcode for more details

How to close browser window after user log out

Hi,
Does anyone know how I can close browser window after user logs out. The scenario is when user clicks a log out button I will invalidate user session and close the browser right away in the backing bean.
Your help would be appreciated.

Try run this and you'll see that it runs fine with no exceptions:
<%
     String someText = "bla bla bla";
     response.setContentType("text/plain");
     response.setHeader("Content-Disposition", "attachment;filename=message.txt");
     try {
          ServletOutputStream os = response.getOutputStream();
          os.write(someText.getBytes());
          os.flush();
          os.close();
     } catch (Exception e) {
          out.println("ERROR: " + e);
%>It looks like that after I've closed the outputStream I can't do any more processing in the JSP. Even if I remove the setContentType and setHeader methods it still behaves this way.
I'm starting to think that there's no way around this...??

Cross references corrupted after placing Word document into an InDesign document

I am placing a word document which contains cross references to headers and captions/figures within the document. They seem to be fine and function correctly in the Word document, however, after I place this word doc into my InDesign doc, I take a look at the cross references panel and notice that the cross references have been corrupted. It is wrapping the wrong portions of text from the cross reference destinations. See screenshot for a visual of how the cross references are malformed. For example the 7th cross reference in the list should say Framework Details, not "Framework Detai
InDesign Cross References Panel - showing malformed bits of text
Another visual of this issue can be seen if I view the text frame in Story Editor view, see below. You can see that the cross reference source tags (blue arrow like symbols) are wrapped around the wrong portions of text. The blue tags shoud be wrapped around Framework Details and 52
InDesign Story Editor
You can see below as to why I think the cross references are fine in the Word doc, you can see the same cross reference I used in the example above in the word doc and it is wrapping the correct portion of text:
Word - showing cross reference is formed corerctly
Why is this not being maintained after placing this file into InDesign?
Also I am not performing any cross reference updates after I import, this problem occurs immediately after the place of the doc.
Why would InDesign be having difficulty in importing these cross references? I have set up a simple test Word document with cross references to headers and figures in and they have imported fine. What could be wrong with this other particular word doc that would be causing this "corruption" of cross references? This is not only causing my cross references to break visually and lack the update capability but also I cannot export the InDesign doc to an ePub as it keeps crashing. I believe from my reading on the web that if there is only one broken cross reference source i.e. the cross reference destination that it is trying to link to is missing, then the export to epub will fail. So this is causing a massive headache for me at the minute.
Is there anything I could be looking at in the Word doc to try and figure out why the porblem is occuring in the first place?
If anyone has any tips or a possible solution to this I would really appreciate it. Even better if someone knows the reason why this is happening I can tackle it from the source and prevent it happening time and time again.
Thanks, Dave

Only bad experiences, Peter ...
I've seen this character shifting before on numerous occasions, both with cross references and with hyperlinks. (It's especially funny with hyperlinks, 'cause you can see that the outline box shifts one character at a time per each next link...)
The thing is it's not just limited to hyperlinks and cross refs. Dave's screenshot doesn't show bold, italics, or other local formatting, but it's a fair bet these are off by a couple of characters as well.
Dave's experiment of making a "minimal" Word document to confirm it's a persistent bug didn't work. I found the same thing: either a document comes in fine, or everything is foo-bar right from the start. There must be some internal Word code that InDesign forgets to count as 'a character position'. Without delving into the Word file with some very advanced tools, it's anyone's guess what code that would be.
I can only offer the one solution that works for me: in Word, remove all hyperlinks (which is what Word uses for internal links as well as for external ones) and convert all cross-references to text. Then, if the file finally imports fine, re-build them in InDesign. It's a cumbersome workaround, but slightly better (only just) than checking each reference, delete, rebuild, check next -- etc. (And with that the chance that your other text attributes are also off.)

I wanted to install windows for Mac and I had vista so I put I the disk and installed it then it loses my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have Ma.

I wanted to install windows for Mac and I had vista so I put I the disk and installed followed the steps it then it closed my computer wen I turned it on it went straight to windows and it asked me to install it and put in the windows box code I found out I didn't have it so I wanted to go back to Mac I shut it off and it just goes back to windows and asks me to put the box code how do I get rid of it and go back to Mac because no buttons work at the start and i can't take out the disk !! Help

The two other posts are correct... so I'll just clarify. What's happening right now is your system is trying to boot into Windows in order to finish the installation. What you want to do is make it boot into OS X. As mende1 indicated, with your system off, hold down the Option key and continue to hold it while you turn the system on. You will eventually be presented with an option to select which partition you would like to boot from. Choose OS X. After you get into OS X, again, as mende1 indicated, change the Startup Disk to OS X. What this will do is cause your system to automatically boot into OS X when you restart it instead of you having to use the Option key when booting each time.
Relaunching BootCamp Assistant will allow you to remove your Windows installation and partition.

My iMac keeps crashing after AHT checked out. Running 10.7.4. Purchased this mac new about 2.5 years ago..

My iMac keeps crashing after AHT checked out. Running 10.7.4. Purchased this mac new about 2.5 years ago. Mail crashed and I can't get it to re-import mail. Safari crashes often. Entire computer crashes at least 2 times a day. I ran permessions in utiltiies. Do not know where to go next?

Good afternoon,
I have followed all previous describes steps and all has been great for a week but just crashed again....
Fri Sep 14 19:12:03 2012
panic(cpu 1 caller 0xffffff8000301702): "new_vnode: vp (0xffffff801f93a078) on RAGE list not marked VLIST_RAGE"@/SourceCache/xnu/xnu-1699.26.8/bsd/vfs/vfs_subr.c:3546
Backtrace (CPU 1), Frame : Return Address
0xffffff80e87bb760 : 0xffffff8000220792
0xffffff80e87bb7e0 : 0xffffff8000301702
0xffffff80e87bb870 : 0xffffff80004ddf0c
0xffffff80e87bb960 : 0xffffff80004f1f7d
0xffffff80e87bbb20 : 0xffffff80005041db
0xffffff80e87bbb50 : 0xffffff80004d4c8f
0xffffff80e87bbc00 : 0xffffff80004d3eda
0xffffff80e87bbe10 : 0xffffff8000319293
0xffffff80e87bbe70 : 0xffffff800030613c
0xffffff80e87bbf50 : 0xffffff80005cd61b
0xffffff80e87bbfb0 : 0xffffff80002daa13
BSD process name corresponding to current thread: backupd
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: System model name: iMac10,1 (Mac-F2268CC8)
System uptime in nanoseconds: 82852757487046
last loaded kext at 29873830462021: com.apple.filesystems.smbfs          1.7.2 (addr 0xffffff7f81101000, size 241664)
last unloaded kext at 14387986152655: com.apple.driver.AppleUSBCDC          4.1.17 (addr 0xffffff7f80791000, size 12288)
loaded kexts:
com.FTDI.driver.FTDIUSBSerialDriver          2.2.14
com.eltima.ElmediaPlayer.kext          1.0
com.apple.filesystems.smbfs          1.7.2
com.apple.driver.AppleUSBCDC          4.1.17
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AppleBluetoothMultitouch          70.12
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AGPM          100.12.42
com.apple.driver.AppleHDA          2.2.0f3
com.apple.driver.AudioAUUC          1.59
com.apple.driver.IOBluetoothSCOAudioDriver          4.0.5f11
com.apple.driver.IOBluetoothA2DPAudioDriver          4.0.5f11
com.apple.driver.AppleMikeyDriver          2.2.0f3
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.26
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.5f11
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.2.2
com.apple.driver.AppleBacklight          170.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin          5.0.0d0
com.apple.GeForce          7.1.8
com.apple.driver.AppleLPC          1.5.8
com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.5f11
com.apple.driver.AppleIRController          312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          33
com.apple.driver.AppleUSBCardReader          3.0.1
com.apple.iokit.SCSITaskUserClient          3.2.0
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCISerialATAPI          2.0.3
com.apple.iokit.IOAHCIBlockStorage          2.0.3
com.apple.driver.AppleFWOHCI          4.8.9
com.apple.driver.AirPort.Atheros40          504.64.2
com.apple.driver.AppleAHCIPort          2.3.0
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleUSBHub          4.5.0
com.apple.nvenet          2.0.17
com.apple.driver.AppleUSBEHCI          4.5.8
com.apple.driver.AppleUSBOHCI          4.4.5
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleACPIButtons          1.5
com.apple.driver.AppleSMBIOS          1.8
com.apple.driver.AppleACPIEC          1.5
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          193.0.0
com.apple.nke.applicationfirewall          3.2.30
com.apple.security.quarantine          1.3
com.apple.driver.AppleIntelCPUPowerManagement          193.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          160.7
com.apple.driver.AppleHIDKeyboard          160.7
com.apple.driver.AppleMultitouchDriver          231.4
com.apple.driver.IOBluetoothHIDDriver          4.0.5f11
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.2.0f3
com.apple.iokit.IOFireWireIP          2.2.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOSurface          80.0.2
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IOAudioFamily          1.8.6fc17
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.ApplePolicyControl          3.0.16
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleHDAController          2.2.0f3
com.apple.iokit.IOHDAFamily          2.2.0f3
com.apple.driver.AppleGraphicsControl          3.0.16
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.driver.AppleSMC          3.1.3d8
com.apple.driver.IOPlatformPluginLegacy          5.0.0d0
com.apple.nvidia.nv50hal          7.1.8
com.apple.NVDAResman          7.1.8
com.apple.iokit.IONDRVSupport          2.3.2
com.apple.iokit.IOGraphicsFamily          2.3.2
com.apple.driver.IOPlatformPluginFamily          5.1.0d17
com.apple.driver.AppleUSBBluetoothHCIController          4.0.5f11
com.apple.iokit.IOBluetoothFamily          4.0.5f11
com.apple.iokit.IOUSBHIDDriver          4.4.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.0
com.apple.driver.AppleUSBMergeNub          4.5.3
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.2.0
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.7
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.iokit.IOUSBMassStorageClass          3.0.1
com.apple.driver.AppleUSBComposite          4.5.8
com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.0
com.apple.iokit.IOFireWireFamily          4.4.5
com.apple.iokit.IO80211Family          420.3
com.apple.iokit.IOAHCIFamily          2.0.8
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOUSBUserClient          4.5.8
com.apple.iokit.IONetworkingFamily          2.1
com.apple.iokit.IOUSBFamily          4.5.8
com.apple.driver.NVSMU          2.2.9
com.apple.iokit.IOHIDFamily          1.7.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          177.5
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          331.6
com.apple.iokit.IOStorageFamily          1.7.1
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.5
com.apple.iokit.IOPCIFamily          2.6.8
com.apple.iokit.IOACPIFamily          1.4

How can i reinstall itunes 10.5.2 on windows xp, after i deleted the older version? help please!

it's been painfull not to get the answer for this issue, since i did update every single apple features that works with my pc windows xp, thi's the 1rst time that i have this problem! anyone out there can help pleeeaasseee?????

"how can i reinstall itunes 10.5.2 on windows xp, after i deleted the older version?"
Go to apple.com/itunes/download
Download the current version.
Install it.
When installing, are specific errors being generated?

I recently synced some old photos onto my ipod touch and they briefly appeared on google maps in geographical/time date order. Couldnt bring it back up after Id logged out. id like to be able to do it again, any suggestions?

I recently synced some old photos onto my ipod touch and they briefly appeared on google maps in geographical/time date order. Couldnt bring it back up after Id logged out. id like to be able to do it again, any suggestions?

Have you tried the following document, kohida?
[What to do when Windows displays a blue screen error message or restarts when syncing the iPhone or iPod touch|http://support.apple.com/kb/TS1502]

Unable to reactivate Windows 7 after clean install - help!

Hi,
Yesterday I formatted my C:\ drive in order to perform a fresh install of Windows 7 Home Premium. I am unsure of whether I was using 64 or 32 bit. I didn't have an install disc so borrowed a friend's retail Home Premium disc and used my OEM key to install. This didn't work and I am unable to reactivate my copy of Windows 7. Having read some other forum posts it would seem that I should have made a backup before formatting my hard drive, but it's too late now.
How can I successfuly reactivate my OEM copy of Windows 7? I am reinstalling on the same exact PC so believe that this should be possible.
Thanks
sad_muso

Hello @sad_muso,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are not able to activate your version of Windows 7 after a clean install of the operating system, and I would be happy to help you!
To reactivate Windows 7 on your desktop computer, I recommend following the steps in this document on Windows 7, Vista, XP Product Activation.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Is Firefox going to support Windows XP after it's retired. Because apparently Google Chrome is saying it will. I'm happy using Firefox and was curious. Thanks!

Wanted to know if Firefox will support Windows XP after it's retired.
Read on the internet that apparently Google Chrome will support it.
I don't like Google Chrome and will continue with Firefox but was hoping they will support Windows XP.
If not, what type of problems would I expect to have?
I was told that as long as I have a good virus program it would be okay.
I have Avast which has worked fine for me.
I do not do anything personal on my computer to worry about if someone would try to hack it.
Only thing I really do alot of is go onto my writing groups in Yahoo. But it would be nice not to worry about Malware, etc. threats like that and having to run my scans everyday.
I'm not at a point where I can purchase a new computer or afford to go to Windows 7 which is still being updated.
Heard Windows 8 is a nightmare and apparently a new version which is more user friendly Windows 9 won't be out til later this year or early next year.
Thanks!

yes, continuing support in this case means that you will get all feature and security updates to firefox as you're used to and in case there are bugs in firefox just for your operating system they should be fixed too (though i suppose the priority assigned to xp specific bugs will be turned down over time).

Marker window empties after placing In/Out in MC clip (CC)

Similar Messages

Maybe you are looking for