Markers moving when locked, especially in score

arg,
I just rebuilt my preferences file. Now, when I am working in score editor, my markers move and get deleted when I don't want them to. This happens when marker window is closed and when the marker track is (supposedly) locked in arrange window. I use the "go to marker" command alot, but haven't identified the exact actiions that cause my markers to move/disappear.
I seem to remember a setting that prevented this starting with v7.1, but can't find anything now.
Any help would be appreciated.
thanks

Thanks,
Unfortunately, I have both the marker track and and the global tracks closed. Seems the only way I can be sure the markers won't move is to lock them to SMPTE postion. Actually, I find that they move around less if I don't lock the marker track in arrange.
I'll keep exploring, since others don't seem to encounter this

Similar Messages

  • HT4085 I have a I pad MD522LL/A version 7.0 and cannot get off of mute I have tried items in settings and moving back lock switch as well as volume any help

    I have a I pad MD522LL/A version 7.0 and cannot get off of mute I have tried items in settings and moving back lock switch as well as volume any help

    Hey there,
    It sounds like you are unable to get any sound from your built in speaker on your device, even after toggling the side switch. I recommend the troubleshooting from the following article named:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    The article title mentions the iPhone, but the steps are relevant for the iPad as well.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • [svn:bz-trunk] 21048: moving the locking of MessageService. subscribeLock one level up in the for loop.

    Revision: 21048
    Revision: 21048
    Author:   [email protected]
    Date:     2011-04-08 06:47:21 -0700 (Fri, 08 Apr 2011)
    Log Message:
    moving the locking of MessageService.subscribeLock one level up in the for loop.
    in case of multiple subscribers, we only lock once
    checkintests pass
    Modified Paths:
        blazeds/trunk/modules/core/src/flex/messaging/services/MessageService.java

    I have finally been able to replicate the behavior that you are seeing on another computer once the image was large enough.  Here are a few notes about this behavior:
    First. The UI only slows down when the images are large, 16 bit images.  The reason why this is unique to 16 bit images is that they can only be displayed on the front panel as 8 bit images.  The workaround that Weiyuan suggested to change the 16 bit display mapping hints towards the root of the problem...that any time a mouse runs over the indicator, Windows asks the entire image to re-draw (having a separate indicator overlapping the image will create the same behavior).  With a 16 bit image, not only does the image have to re-draw on the screen but the 16 bit pixels need to be mapped to 8 bits.  When setting the 16 bit display mapping to Full Dynamic, this requires mor computation/pixel than 90% dynamic or one of the other mapping schemes.
    This is expected behavior if your program is running and you're trying to display a large 16 bit image.  To fix this behavior there are a couple options:
    Change the 16 bit display mapping to something other than full dynamic.  You can choose which 8 bits to display or if you want to map the bits. 
    Resize the image just for viewing purposes on your front panel (since you aren't going to view every single pixel of you image on the screen). You can use the IMAQ Resample.vi to do this.  This will allow you to take your 1500x1500 pixel image and only display a 500x500 pixel version.
    If you are interested in viewing small details of the large image, consider just displaying a smaller region of interest at a time.
    Let me know if any of these solutions work for you.  Good luck on your application.
    Zach C.
    Field Engineer
    Greater Los Angeles

  • Iphone wifi dropping connection when locked

    all in the title but, when locked it forgets the wi-fi password, and so i have to re enter it.
    iphone 4
    belkin wireless n router with wpa passphrase.

    Are you hiding your network identification (SSID)?  If you are doing that, it is a pretty common complaint.  In either case, the fix is about the same:
    Fix 1
    When you are connected to your network, tap Settings > WiFi > and then tap the blue ">" next to the network name with the check mark.
    The next screen will give you your connection information.  Scroll until you find "Forget this Network" and tap that.
    That should return you to the Settings > WiFi page.  Tap Other, and then re-enter your network name, security, and network password.
    Fix 2
    tap Settings > General > Reset > Reset Your Network Settings
    When the iPhone restarts, tap Settings > WiFi > Other and re-enter your network name, security, and network password.
    Fix 3 - if all else fails
    Reboot your router (uun plug it from it's power source).

  • KP06 Cost Center Budget Planning System error when locking the data records

    Hi,
    While updating Cost Center Planning system(KP06) its giving the below error:
    System error when locking the data records.
    Message no. KI502
    Diagnosis
    The lock to protect the data records being processed could not be set. The
    probable reason for this is that the SAP locking table is full and no more
    entries can be added.
    Procedure
    Inform your system administrator immediately
    No planning data has been changed
    Message no. K8038
    Diagnosis
    You used Post. While preparing the data for posting, the SAP System
    determined that no changes were made in the available databank values.
    System Response
    A posting activity price is not necessary
    Please help me how can we rectify the above error..
    Thanks
    VS Rao

    Hi,
    check the locking entries (t-code SM12).
    http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
    Best regards, Christian

  • Content canvas and  a stacked canvas moving when scroll through the details

    Dear Friends
    I have Mater and Details Block , and I have two canvas content canvas and a stacked canvas, and the a stacked canvas on top of content canvas , and I have set the horizontal and vertical scroll bar for the stacked canvas , my problem is that when I inquire and click on the details block which is on stacked canvas the header content canvas is moved up
    and what I want the header to be stable and not moving when scroll through the details .
    Best regards
    Jamil Alshaibani

    if the canvas is moved during runtime in general the problem is that is does not fit completly in the window. Try to adjust your window-size so that the whole layout fits into it.

  • Ipad does not download when locked

    Every since i upgraded to ios 7, my ipad 4 refuses to download apps when locked. Its no problem with small apps as i can leave it unlocked but when i have to download big file(apps) its a problem as i have to leave ipad unlocked for successful download. After soon as i lock the ipad the download fails. I am using wifi by the way. Thanks in advance.

    If you change Settings > Do Not Disturb > Allow Calls From (e.g. to allow from 'Everyone') then it should still ring if the iPad is locked.
    For the 'Only While iPad is locked' and 'Always' options on that screen, one of those two has to be ticked.

  • While processing ALEAUD - "Error when locking the audit statistics"

    Hello,
    I am sending out IDOC for HR data and then prcessing ALEAUD inbound idoc immediatley (setting is done in WE21 partner profiles).
    While processing these incomming idocs, I am getting this error "Error when locking the audit statistics for P01LOGSYS1 IMTIMEDEP HRMD_A" for few idocs. e.g. out of 1000 for 100 idocs this error will happen and IDOC goes to status 51.
    If I try to process thes idocs ALEAUD using background processing and if I schedule 2 jobs at a time then I will get same error and IDOC goes to status 51.
    Can someone help me out?

    Hi
    I tried processing the idocs in background processing as you have suggested using program RBDAPP01 (inbound).
    There are 2 options in this program serial processing and parallel processing. When I select serial processing everyhting goes smooth but it takes long time. But when I select parallel processing I get same locking error mentioned above and only few idocs will get processed successfully with status 53 and all other will error out with status 51.
    If I schedule 2  different jobs in background program RBDAPP01 (inbound) using serial processing then same thing will happen.  only few idocs will get processed successfully with status 53 and all other will error out with status 51.
    And I will get locking error ....
    Note 1333417 says, " these IDocs will be processed via background runs of report RBDAPP01 \ RSEOUT00 (using background work processes) in batch mode leaving dialog work processes free for users and mission-critical processes. Hence you will not encounter the resources problems you are currently experiencing. The only other option would be to try increasing the number of available dialog work processes. The number of dialog processes must be greater than or equal to the total of the number of update and background processes per application server and must be configured across all operation mode
    switches (see SAP note 74141). *However when there are a large number of IDocs being processed this is not a practical solution."*
    Does that mean there is no possoble solution for this issue. If I increase dialog work processes will it be helpfull ?

  • I want a screen saver on when locked?

    i would like to use my phone screen when locked as a clock - can this be done?

    No.

  • Where can I give feedback regarding Aperture? I'd love to see the ability to removes EXIF data when exporting, especially to social networks.

    Where can I give feedback regarding Aperture?
    I'd love to see the ability to removes EXIF data when exporting, especially to social networks.

    Robert,
    For any normal Export, simply cilick the list of option and further click on Edit.  There deselect to include Metadata, and there will be no EXIF data exported.  But no copyright info either.
    The option already exists to do what you want.  Once a normal Export has deselected that, I believe even exports via plugin for say FB will not have it either.  I tested with an export to SmugMug after deselecting in an earlier ordinary export, and EXIF info was not transmitted.
    Ernie

  • Already unlocked mutex gets unlocked again when locks are exhausted

    The current (4.7.25) implementation of error handling in __lock_get_internal suffers from a deficiency described below (visible in DIAGNOSTIC mode only though).
    Consider the current error-exit cleanup code (lock.c, line 1019):
    err:     if (!LF_ISSET(DB_LOCK_UPGRADE | DB_LOCK_SWITCH))
              LOCK_INIT(*lock);
    done:     if (newl != NULL &&
         (t_ret = __lock_freelock(lt, newl, sh_locker,
         DB_LOCK_FREE | DB_LOCK_UNLINK)) != 0 && ret == 0)
              ret = t_ret;
         OBJECT_UNLOCK(lt, region, ndx);
         return (ret);
    The OBJECT_UNLOCK tries to unconditionally unlock the previously locked partition mutex. Unfortunately this mutex is not always locked.
    Initially, when trying to lock, a partition mutex is correctly locked (lock.c, line 585):
              /* Allocate a shared memory new object. */
              OBJECT_LOCK(lt, region, obj, lock->ndx);
              ndx = lock->ndx;
              if ((ret = __lock_getobj(lt, obj, lock->ndx, 1, &sh_obj)) != 0)
                   goto err;
    But, when a new lock is allocated, the following code is used (lock.c, line 758):
              part_id = LOCK_PART(region, ndx);
              /* Allocate a new lock. */
              if ((newl = SH_TAILQ_FIRST(
              &FREE_LOCKS(lt, part_id), __db_lock)) == NULL) {
                   if ((ret = __lock_alloclock(lt, part_id)) != 0)
                        goto err;
                   /* Dropped the mutex start over. */
                   goto again;
    This one calls __lock_alloclock that MAY (but does not always do, see the partition size check, lock.c, line 477) unlock the current partition mutex.
    So, when locks/partitions are exhausted in DIAGNOSTIC mode, the failure leads to an environment DB_RUNRECOVERY panic instead of a simple ENOSPC being returned. I cannot say if this does any harm in non-DIAGNOSTIC mode, but I think that unlocking the same mutex twice won't do any good.
    Thanks for your attention.

    Thank you for your reply.
    Yes, I considered myself that relocking mutex back is the easiest solution, but did not bother implementing it since the problem arises only when locks are exhausted which is a showstopper by itself.
    As for my case, I just increased locks and lock objects limit tenfold (its okay since I delete several thousands of records via one transactional cursor and this isn't used in a production application, more of a test), so even DIAGNOSTIC build works properly.
    Also, I think I have a small suggestion not related to the original topic. When upgrading to 4.7.25 from 4.5.20, I was very happy to discover that environments (region structures I think) are now properly distinguished between platforms (different binary layouts, probably a hash of some internal data or structure size check), so the x64 binary trying to open x86-created environment (or vice versa) doesn't just crash with an assert or an access violation (yes, I run BDB on Win32/Win64 and happy with it) -- it checks some sort of region structure hash and bails out with proper error message about incompatibility.
    Unfortunately, the DIAGNOSTIC vs non-DIAGNOSTIC builds still suffer from the aforementioned problem -- they crash/assert when opening incompatible environments (i.e. DIAGNOSTIC environment tries to open non-DIAGNOSTIC one or vice versa). I fully understand that different builds are not intended to be binary compatible, but adding something like you did for region structures to differentiate DIAGNOSTIC and non-DIAGNOSTIC environment formats would be a very good idea.
    Thank you for your time.
    Message was edited by:
    onyXMaster

  • Why is my desk top moving when i move my mouse

    why is my desk top moving when i move my mouse

    Turn off Zoom from the Universal Access and Keyboard & Mouse panes of System Preferences.
    (96210)

  • Album cover present when the ipod not locked, but not when locked

    I bought a new 4rth generation ipod touch, and I bought new music and synced it. The new 2 albums, when I play the songs, I can see the album cover when my ipod is not locked, but when locked, I only see my wallpaper and there is no album cover...
    why is this?

    Just wanted to say I'm having the same problem. It's not detrimental by any standards but it does bother my OCD a tad. Hopefully it's a small glitch that can be resolved.

  • I have an iphone 5 and i upgrade it to ios7.0.2 but my panorama image is not moving when i move my cell? is there any special setting?

    i am not getting any panorama image is moving when i move my phone.Is there any special setting??

    Are you talking about using the camera application?
    I assume you are not ... instead I assume you are talking about a panoramic wallpaper that at one point during iOS 7 development was supposed to move when you move your iPhone.  That feature did not make it to iOS 7.

  • Why does my iPhone 4 not show what my messages says when locked? It says ''message" but not what the person has said?

    My iPhone 4 when locked or when unlocked when I receive an iMessage doesn't tell me what the person has said. When my phone receives a message it says 'message' underneath the persons name but not what they have said. Please help me?

    Also enable Show in Lock Screen on that setting.
    Also, Settings/General/Passcode Lock. Set the options.

Maybe you are looking for