Markers not coming through into DVD studiopro

This may be a question for the dvd studio forum.
I export in compressor with markers and put on to the track line in studio pro. The markers come through ok. I take a second clip and put it on straight after the first - no markers.
However the markers are there. If I put the second clip on first they appear ok and putting the first clip on after that and again no markers.
I have done similar things before and its worked without me thinking about it.
Pete Snowdon

Are you adding multiple videos to the same track in DVD Studio Pro, similar to the way you would add clips in FCP's Timeline?
If so, that can't work. The markers are based on time.
Example: Clip 1 is two minutes long and has a marker at 31 seconds.
Clip 2 is three minutes long and has a marker at 50 seconds.
Adding clip 2 behind clip 1 results in its 50 second marker moving to 2'50" which will inavalidate it.
Solution: Put your video clips on different tracks and link them using the End Jump function in DVD Studio's Connections pane.

Similar Messages

Master comments not coming through into Subclips....

Good day to you all,
Still fairly new to FCP but can't for the life of me work out what I'm doing wrong here:
Basically, I'm taking entire tapes into the viewer and marking them - using the extend mark (option <) to mark the length of each clip - while giving them a name. I'm also, in most cases, adding a log note on the marking box, which appears in the 'Master Comment 1' section of the browser for each marker within the tape. After I have gone through an entire tape (I have about 24 hours of material to work through, so I need to sort this out quickly!) I select all the markers in the browser and hit Cmd. U to make them into subclips.
So from this point, I have two questions:
Firstly, is there any way of overriding the annoying way FCP names the subclips? For example, I name a subclip "Concrete Sculpture 1 - pan right", and it comes out as "Concrete Sculpture 1 - pan right from 'A1 Tape 04 Copy' Subclip". So I end up with about a hundred clips that I have to manually just go down and delete this extraneous nonsense which just serves to clutter up the legibility of the clip. I know this information, the image tells me its a subclip and I can see what tape it was from further along in the browser. There must be a way to override this annoying naming thing?
Second, none of the stuff in the 'Master Comment 1' column comes through into the subclips! So I'm left with a load of clips which don't, in many cases, have the most important bit of description for identifying them, and which I have painstakingly entered! What's going on here?!?!?!
Just when I thought I was starting to understand FCP, these two little niggles pop up.
Any ideas and suggestions would be greatly appreciated! Thank you in advance,
Warm regards,
Steve
Mac Pro Mac OS X (10.4.8)
Mac Pro Mac OS X (10.4.8)

I don't mind subclips, and like many people I am forced by other factors to use them. So I do better if I pretend to actually like 'em.
Jim, I don't understand what's different about logging with subclips and logging off tape. It's not like us subclippers don't log just as much as anyone else. Subclipping is a sub-maneuver of a particular subset of logging systems.
But the naming thing is really ridiculous. We should be able to go through a clip, click one button, and have it chopped into two files right there with a user-definable numerical naming scheme. And so on at the next cut point. Geezer talk: "my old NLE could do that, and that was 10 years ago...". It's true, and that was a DraCo.
Steve, I do it differently based on circumstances. Sometimes I mark and then subclip, but that's when the naming can get really really tedious.
Here's what I'm most comfortable with:
- load the SuperClip in the viewer
- name it something short and relevant
- Control-C copy that base name
- I and O to set in and out for first shot. I set for maximum possible use of either video or audio.
- Command-U makes a subclip and selects the subclip's new name for replacement
- right arrow to move to end of base name
- type whatever you need to differentiate that subclip.
There are many variations, but when I get in the groove this is very fast. And it completely bypasses the Ridiculous Name Syndrome, 'cause you change it as soon as it pops up.
I am one of those people who puts all the search terms or codes in clip names. For long form doc work. This makes a good flow for me, most of the time.
I know there are better ways lurking out there, so I'm watching this space.

FF7b liquidity analysis - blocked SD orders not coming through

Hi,
our business wants to see also blocked orders. Currently they are not displayed in FF7b.
Is there a way to achieve this?
Regards
Hein

I have an error where the *Total Actual Costs* for a Process order is not pulling through.
When I go into *Costs* -> *Analysis* I see that the *Total Target Costs* are coming through correctly, but the
*Total Actual Costs* are not coming through, there are no values.
The material has all the relevant pricing correctly in place.
These orders all have the correct *goods issues/receipts* done, as well as all the confirmations on the
*PI Sheets* are done correctly, but still no *Total Actual Costs* are coming through.
Please advise if there is something incorrect in the costing setup, master recipe setup or BOM setup.
Process orders for other materials all work correctly, however only this material does not pull through
*Total Actual Costs*
Dear,
please check the material document of GI and GR- In that document, the material as any value?
If yes revert me, check the settlement rule for that order in co02

I just downloaded OS X Mavericks and my texts are not coming through to my Mac at all. How do i change that??

I just downloaded OS X Mavericks and my texts are not coming through to my Mac at all. How do i change that??

Open Messages. Then go to the Menu and click on Messages. In the drop down select Preferences. Choose the accounts tab. If you have already added your iCloud account then remove it and add it again.

My Apple ID verification e-mails are not coming through to my e-mail account.

My Apple ID verification e-mails are not coming through to my e-mail account. How can I fix that?

Hi there Lenore1936,
You may find the troubleshooting steps in the article below helpful.
Manage your Apple ID primary, rescue, alternate, and notification email addresses
http://support.apple.com/kb/HT5620
-Griff W.

My emails are not coming through to my blackberry phone....

My emails are not coming through to my blackberry phone. I think it is because I changed my password to my email?

Hi there!
If you changed your email password, then you need to change the stored credentials within BIS. See this demo for how to access your BIS configuration:
http://na.blackberry.com/eng/support/blackberry101/setup.jsp#tab_tab_email
If that does not work, then please return to these forums (http://supportforums.blackberry.com/rim/) and register an account so that we can provide you with direct assistance.
Cheers!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why am I getting frequent spam emails via iPad that are not coming through my primary email account? And how do I get them to stop?

Why am I getting frequent spam emails via iPad that are not coming through my primary email account? And how do I get them to stop?

Hi D.,
Unfortunately phishing is far too common these days. The articles below will help you determine the authenticity of the emails that you received.
Identifying fraudulent "phishing" email
http://support.apple.com/kb/ht4933
Identifying legitimate emails from the iTunes Store
http://support.apple.com/kb/ht2075
-Jason

Sound not coming through from recorder

*HELP*
When I transfer movies through Pyro A/V link from my recorder, the sound is not coming through.
The video jack and the sound jacks are both plugged in from the same source. Any suggestions!!!

It could be that your recording is in MPEG-2 format, which seems to be common among hard drive camcorders, and you require the MPEG-2 codec (available from the Apple Store).

Trouble with Meeting Requests not coming through - GMail to Exchange

I've just started trying to get a handle on all the thing my wife schedules for me around the kids. I've tried to get her to send me meeting requests so they go on my calendar but a lot of the time they're just not coming through. I get all of her emails and I get meeting requests all day long but there seems to be a problem getting the meeting requets from her.
She has an iPhone 4S and I have an iPhone 5 both running IOS 6.
She has gmail set up as Exchange in Mail on the iPhone.
I have a true MS Exchange account set up on the iPhone
She will create an event and add my work email as the invitee. It will show up on her phone but never come through sometimes.
Sometimes I've noticed that on her phone my name has a question mark next to it in the invite.
Any ideas? Any direction?
Thanks
Josh

Any ideas on this? Still having the problem.
Thanks
Josh

Email attachments not coming through

I am having trouble getting attachments in emails. Some of them come through and other do not. Most of them do not. I get a message that says "this message has not been downloaded from the server" What does this mean and why are they not coming through. I have 3 emails set up. My work email on an Exchange Server, Yahoo and Cox.net. Any suggestions or help would be grateful.

I assume these are pop email accounts?
If so, when on edge the speed is slower so attachments take longer to actually load than the email does. You may see the email show the headers and first few lines in preview, you may even get the email notification noise, but if you access the email before the full attachment is downloaded you will get the message not downloaded from server message.
Two options:
1 - wait longer for the attachments to download before accessing the email, make sure the spinning circle is done spinning - when I was on pop, depending on the size of the attachment, I had to wait up to 30 minutes to get the email AND attachment to download.
2 - switch to an imap account and this issue basically goes away.

Ive forgotten my security questions for my apple id, it keeps saying that it has sent an email to me with the information but the email is not coming through ????

ive forgotten my security questions for my apple id, it keeps saying that it has sent an email to me with the information but the email is not coming through ????

Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

HT201342 Why are photos sent to me not coming through?

Why are photos e mailled to me not coming through to my icloud.com e mail?

hazel1254 wrote:
I have been sent several e mails containing photos and none of them have been received.
You may also want to check your space available as you only get 5GB free. It's unlikely that this is what you are experiencing, but it can certainly cause you not to receive any emails that don't fit.
Reference: http://support.apple.com/kb/ht4863
Mailbox Size
Your iCloud account includes 5 GB of free storage, which is shared by mail, documents, account information, and the iOS settings and app data that are automatically backed up by iCloud. You can also purchase additional storage.
Manage your iCloud Storage: http://support.apple.com/kb/ht4847

HT201209 reedemed code on iphone but not coming through on ipad

I have reedeemed itunes card on my iphone but it is not coming through on my ipad, which is same apple id it usually does.

Apple has a pretty comprehensive trouble shooting guide in Mail Setup, Troubleshooting etc..

Email not coming through!

So I just got a new Pearl 8130 from VZW last Saturday and for the majority of the time I've had the phone... my emails aren't coming through! I've got three accounts set up on it: 1 - a work account which I need to make sure I have my Outlook at work set to leave a copy of the message on the server after it downloads it locally to my computer. 2 - Gmail account #1 which I have going to my outlook on my personal computer at home. And 3 - Gmail account #2 which I only check through the internet.
I should be getting an email on my third account everytime someone posts to a thread I've subscribed to on HoFo... which is often enough for me to know that it's not being sent through to my BB.
Any advice? Interestingly enough, I'm able to send emails from my BB and they are recieved just fine, however I cannot seem to retrieve them.
-Verizon Pearl 8130

ITChannelTraine wrote:
what steps have you taken to troubleshoot?
1) options > advanced options > host routing table > menu > register now
2) log into your BIS account and resend service books
3) remove the email accounts from the BIS, then re-add it after removing all the service book from your device.
I hadn't done your #1 option until now. Technically, what does that do for me? Shouldn't it have been registered already?!
I had removed all my email accounts and re-added them. That seemed to work for about 12 hours yesterday morning. Since around noon or so yesterday I haven't been able to receive any emails.
What are service books? I noticed that in the "advanced options" too. They remove themselves when I delete one of my email addresses. And then re-add themselves when I register that email address again.
-Verizon Pearl 8130

Chapter markers not making it to DVD SP

Hi everybody. I don't see chapter markers I expected to find in my DVD SP project. This was my first time placing chapter markers in FC and it was my understanding they would appear in the DVD SP timeline. Here's my workflow:
I exported a sequence from FC that had four chapter markers using 'quicktime movie'/current settings/not self contained/'include DVD SP markers'. Opened in compressor and exported at best settings for 90-minute film for SD DVD with 'include DVD SP metadata' selected. (should I have also selected 'include chapter markers only'?)
I brought the clip into DVD SP and placed it into track one. No markers. Do I have to do something to make DVD SP find the markers? Have I made a mistake?
Note: the chapters show up when I open the .mov file in Quicktime but not when I open the M2v file in Quicktime.

In FCP, how did you create the Chapter Markers? The proper way is to hit the m key twice, then click the CHAPTER button. The markers HAVE TO BE on the Timeline - not on the clips (deselect any clips BEFORE adding Chapter Markers).
-DH

Markers not coming through into DVD studiopro

Similar Messages

Maybe you are looking for