Markers not showing up after opening a saved project. Where did they go!?

My first time using Prelude CS6 yesterday and had good success with ingesting, marking clips (into subclips, comments, etc.), saving the marked movies, and them sending the subclips to Premiere. They dumped into Premiere as expected.
However, this morning I started a new project in Premiere and planned on using the same clips I marked up in Prelude. I wanted to do a little more marking so I opened the Prelude project I saved yesterday and the movie files are there but none of the subclips, comments, or other markers are showing up.
The only thing I can think of is that I did not do a rough cut in Prelude, but I don't see why that would mean losing the markers from the source footage.
Am I missing something? Any help would be appreciated! Thanks...
-John

Interesting...
so this morning in preparing to upload a PL project for you, I
decided to try a new test PL project with different footage. The one I
played with this morning ("GrandCanyon_1.plproj" in the Folder
"Prelude_test") seems to work fine! I threw in some markers, saved, closed
PL, re-opened PL and the markers were there.
So I did the same thing using some footage from the project that I posted
about (ingested some footage, placed a sub clip marker, saved, closed,
re-opened), and the markers were gone. Perhaps it has to do with the source
footage?
Anyhow, I'm uploading the files to my ftp if you want to check them out.
They should  be uploaded by 10am central.
Access info sent in separate email.
Thanks!
-John
-- John Niebling
314-974-6938
www.HipSnapCreative.com

Similar Messages

  • Please help!! I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000  photos not showing up. What happened?! Where did all my photos go?!

    WOOHOO!!! i finaly fixed the problem. Here is what to do:
    Chances are if you did the same thing as me you either have
    A) No album names at all for ALL your songs in your library
    or
    B) Have the same name for every album for ALL your songs in your library.
    Here is how to fix it (yah it will take a little work but its worth getting your iPod functioning properly).
    Unless you dont want to have to go and actualy set al lthe album names for every song here is what you can do:
    Go through to iTunes and arange your songs by Artist name. Click the top song for your first artist, hold Shift and click the last song for that same artist (to multi select all the songs for the artist) go into get info and check the Album box. Copy the name of the artist to the Album box and hit ok.
    Now when u update your ipod and go into ur Artists section the actual Artist name should show up instead of the song names.
    For some reason having the same album name for all your songs messes up the organization of the iPod.
    Hope this helps anyone else that is having the same problem

  • Calendar appointments not showing up after created and saved on iphone 4

    Bought my wife a used iphone 4 as an interim phone until her contract comes due.  Her old phone died.  When she enters an appointment on her iphone and saves it, it doesn't show up in her calendar on her phone, but it DOES show up on her ipad.  How can we get the appointment to show on her iphone?

    Interesting...
    so this morning in preparing to upload a PL project for you, I
    decided to try a new test PL project with different footage. The one I
    played with this morning ("GrandCanyon_1.plproj" in the Folder
    "Prelude_test") seems to work fine! I threw in some markers, saved, closed
    PL, re-opened PL and the markers were there.
    So I did the same thing using some footage from the project that I posted
    about (ingested some footage, placed a sub clip marker, saved, closed,
    re-opened), and the markers were gone. Perhaps it has to do with the source
    footage?
    Anyhow, I'm uploading the files to my ftp if you want to check them out.
    They should  be uploaded by 10am central.
    Access info sent in separate email.
    Thanks!
    -John
    -- John Niebling
    314-974-6938
    www.HipSnapCreative.com

  • Itunes does not "SHOW" all of my folders of photos, where are they?

    some of my folders of photos are missing when itunes is open. I want to sync all my photos to ipad.

    Go to menu Edit -> Show Browser, and see if this is what you are looking for.
    Some of the genres are standard and cannot be deleted. That is why you have a bunch there when you have no songs when you first load iTunes.
    Other Genres are added based on the songs you import.
    I notice that on ocassion, when I import a new CD, sometimes the Genre will be similar to another one such as "Folk Rock" and "Folk-Rock". I just select all the songs in both Genres and edit the Genre so they are the same.

  • Lost files after creating a Drop Box - WHERE DID THEY GO?

    Having set up a Drop Box for certain private pictures of my fiance by creating a folder and changing the access permissions using "Get Info", and changing everything to "Write Only (Drop Box)" I later tried to access the files by changing the permissions back to "Read & Write", to which OS X said "Are you sure, this cannot be undone?" I said Yes and entered my password, at which point the picture folder reverted to being a normal filder again, but now with apparently nothing in it. It seems that I accidentally deleted the picture files I had dropped into the drop box. The mystery goes on, since in the 'More Info" panel for the folder, it still says that it's taking up around 9MB of disk space (about the size of all those pictures), so could it be that they're still lurking somewhere?
    Any help gratefully received......
    Nikhales

    Yep quite right
    This looks good - these are the names of the picture files!
    Great help, thank you - What's next?
    INT-7-5-483:~ Nik$ cd /Volumes/Mac\ Pro\ Storage/Pictures/Pics/
    INT-7-5-483:/Volumes/Mac Pro Storage/Pictures/Pics Nik$ ls -al
    total 18680
    drwxrwxrwx 16 Nik Nik 544 Jul 1 14:03 .
    drwx------ 7 Nik Nik 238 Jul 17 23:58 ..
    -rw-rw-rw- 1 Nik Nik 6148 May 22 09:24 .DS_Store
    -rw-rw-rw- 1 Nik Nik 719522 Jun 22 22:06 DSC00010.JPG
    -rw-rw-rw- 1 Nik Nik 362809 Apr 10 13:50 DSC00014.JPG
    -rw-rw-rw- 1 Nik Nik 676039 Jun 15 08:14 DSC00027.JPG
    -rw-rw-rw- 1 Nik Nik 579064 Jul 1 14:03 DSC00049.JPG
    -rwxrwxrwx 1 Nik Nik 676249 May 22 09:26 MOV00012.3GP
    -rw-rw-rw- 1 Nik Nik 683984 May 22 09:20 aDSC00013.JPG
    -rw-rw-rw- 1 Nik Nik 673026 May 22 09:20 aDSC00014.JPG
    -rw-rw-rw- 1 Nik Nik 1042127 May 22 09:20 aDSC00015.JPG
    -rw-rw-rw- 1 Nik Nik 1048259 May 22 09:20 aDSC00016.JPG
    -rw-rw-rw- 1 Nik Nik 1072265 May 22 09:20 aDSC00017.JPG
    -rw-rw-rw- 1 Nik Nik 696748 Apr 10 09:48 aDSC00018.JPG
    -rw-rw-rw- 1 Nik Nik 580981 Apr 10 10:34 aDSC00019.JPG
    -rw-rw-rw- 1 Nik Nik 719522 Jun 22 21:57 bDSC00010.JPG
    INT-7-5-483:/Volumes/Mac Pro Storage/Pictures/Pics Nik$

  • HT4191 All my notes on my iphone disappeared after synching yesterday. Where did they go?

    I lost all my notes from my iPhone 4S after synching last night. Where did they go?

    Hi..
    If you have iCloud enabled, tap Settings > iCloud
    Switch Notes off then back on then restart your iPhone.
    Hold the power button until "slide to power off" appears.  Slide to power off.  After it is off, press the power button to turn it back on.

  • Notification on apps are not showing until i open them ??

    notification on apps are not showing until i open them

    Hello captin007,
    Thanks for the question. After reviewing your post, it sounds like apps show notification only after you open the app. I would recommend that you read this article, it may be able to help the issue.
    Understanding notifications on iPhone, iPad, and iPod touch - Apple Support
    If you're not receiving notifications for a specific app, try these steps:
    Verify that the app supports notifications. 
    After installing an app or restoring a backup to a different iOS device, open the app to begin receiving notifications. If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
    Check Settings > Notification Center to ensure that the app is configured for notifications. If notifications do not appear in the Notification Center, verify that the Notification Center setting for the app is enabled.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario 

  • When someone messages me their contact name does not show up as how i saved them!!! does this mean someone has access to my phone?

    When I get a message from my friend, her contact name does not show up the way I saved her and I am wondering if someone has hacked my phone or something

    That is what I am trying to work through. I understand you are seeing it in Notifications, that was what I was trying to confirm. When you open the message, what is displaying on the phone, Juan? Is Notification the only place that you are seeing this name differently? And yes, if you have the name saved as John, it should display as John. How are you backing up/syncing your contacts? Are you using a supported application on the computer, or are you using a cloud service, such as iCloud? If you go into your contacts and look in the upper left corner of the application, does it list more than one source for your contacts? Do you have more than one person with the same phone number listed in contacts, similar to having two people that work at the same place? Is the Notification only displaying a first name and no last name? Do you have first names only in your contacts?

  • I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    It is hard to exactly understand what you have  done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
    Updating a Chart Copied from a Numbers Document
    If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
       Select the chart on the page and click the Refresh button that appears.
    Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
    I hope it has helped you.

  • Closing an application that does not show up as open

    I downloaded an application off the internet and it is messing with my computer.  I tried all the ways to delete but it wont because the error message says that it is still open.  however, I cannot close it using the conventional methods including turning off the computer.  it does not show up as open when I use the force quit menu so it will not let me force quit it.  ultimately, I want to delete this intrusive application.

    Name of app?
    Did it come w/a Read Me file?
    Did it come w/an uninstaller?  If so, use it.  If not, go the app manufacturer website for uninstalling instructions.
    Check System Preferences>Accounts>Login Items.  You can disable from there.  Also, there is a mapping location of where the file is.

  • Premiere CC "Not Responding" Message after opening

    Hi,
    Two of my projects (one last week that I managed to get open) have crashed. They open up on CC, then the project  loads and I can see everything fine. However, when I click anywhere, Premiere goes white and it says "Not Responding" on the top. I tried opening my previous files but they crash as well.
    The first one I fixed by renaming my footage files (to break the links), opened it, then re-linked. However, this doesn't work on the second project.
    When I press Ctrl + Alt + Delete, then go back to my desktop the 'white' and 'not responding' disappear but once I click premiere, it reappears again.
    What could be causing this? Since there are no error files, I can't figure out what's going on.

    More information:
    1. Premiere Pro CC for PC
    2. Windows 7 64bit
    3. Source Footage (7 5D cams, and 1 RED cam - shot in 3K)
    4. No error message, just white screen and "Not Responding" at the top.
    5. This occurs right after opening up the project (project loads, and I can see everything, but once I click a window, everything turns white).
    6. No other programs running.
    7. No third party codecs installed
    8. Hardware: Xeon E5420 processors (2 quad core), SSD main hardrive, 2 Tb HDS x6, 8 gigs RAM, NVIDIA quadro FX 1700
         - Yes, I'm using Mercury Playback Engine

  • OHS 11gR1 web-page not showing up after creation, registration of webgate

    Hello there,
    The OHS webpage on host:7777 is not showing up after I created, registered the webgate on oam 11g console. I copied the 2 artifacts into the ohs proxy server box in the webgate/config folder and restarted OHS instance but now, the ohs page won't show up. The opmn status says its alive but it doesnt show up in the browser.
    I have oam 11.1.2 installed with webgate 11.1.2 and ohs webtier 11.1.1.6.0. Am I missing any step? Do I need to create a authentication scheme before I check it? Please advise to the earliest convenience.
    Thanks!!

    Hi,
    You need to create authentication scheme. also create resourse for index.html page in OAM console and add it to protected resourse list. So when you will access OHS with 7777 port it will redirect to OAM SSO page, after successful login it will take you to the home page of OHS.
    mark, if this helps.
    Regards,
    Kishore

  • The templates are not showing up after I select them???

    the templates on pages are not showing up after I select them....unless I highlight the entire page and select a particular colour.  That leaves all the colours in the photo off.  Any help would be so very helpful.   

    CeraG - It will help to answer if you supply your system version, pages version and if you lately have done anything to the computer (installing, uninstalling etc)
    I think you have forgotten to do a Software update or it could also be a font problem but more info from you is needed!

  • Why are contacts not showing up after added

    why are contacts not showing up after added. Don't show up after they added when I want to select then for a new email

    I am replying to my post with the hopes that someone can please help me!
    I am adding new episodes, but they don't show up on the main page. The most recent one to show up is from 10/29/07. I added a new episode today, but it doesn't appear on the main page (before you subscribe). Is there a limit to the # of podcasts that can appear on the main page? Has anyone else had this problem? All the relevant info is above.
    Your help is much appreciated.
    Message was edited by: oneness_podcaster

  • Why is it not showing anything after I plugged in my USB hard drive? I cannot locate the drive in my macbook. FYI this happened after few times using it.

    I need help as I am new to IOS.
    Currently it is not showing anything after I plugged in the hdd to my mac book.

    I had the same exact issue, which you can see in another forum.
    I "killed" both my MBP and my wife's MBP by plugging in my iPhone and getting a  message about USB drawing too much power.
    It was not fixed by using an SMC reset.
    I DID fix it by unplugging the battery, I left it unplugged long enough to remove the RAM, HD and put some RAM and HD back into place. (I initially swapped the RAM and HD from my MBP into my wife's MBP.
    After that everything was good, although upon first boot, some apps crashed because of the "system date" being set to a date before 2000. I forget the exact date, but it will be some time in 1984, the birthdate of the Macintosh. It is not a big issue, just correct the date and time.
    If you are curious about that date, copy a large file on your drive and look at the CREATED/MODIFIED date....it will show this same date, until the copy is complete, at which time you will see the correct one.
    Once again, try to disconnect your battery, very carefully by lifting up the connecter evenly on both sides to avoid damaging the connector or the board.

Maybe you are looking for