Market value of bpc consultant

Hi All,
I am exp. Technical / Basis consultant, trying to gain some skills in other modules i.q. BPC ...., have been advise to learn BPC, what do you think about market value of BPC consultant , is there, or going to be demand on the market ??
PS: Is there someone in Germany offering BPC trainings ???
Any constructive comment is welcome.
sahmad
Edited by: sahmad on Oct 19, 2010 12:49 PM

You might also want to check out this site:
http://www.powermax.com/preowned_macs
This is a very reputable online store selling new, used, and refurbished Macs and you should be able to get an idea. Note that their used Macs do not come with install media - make sure you point that out to your insurance by adding at least $29 US for the Snow Leopard install disk (plus the retail price for iWork and/or iLife if you had it).

Similar Messages

  • Valuation Procedure to calculate Fair Market Value

    Hi Treasury Experts,
    In the Treasury Hedge Management component we are looking for a valuation procedure which can handle the calculation of the Fair Market Value of the financial transactions in line with the standard FAS133 accounting standard.
    We have financial contracts that run over several months. From the contract start date to contract valuation date we need to value based on comparing the spot rate of the transaction against the close rate applicable at valuation date. We can use the Price Valuation Procedure for Forward Exchange Transaction with step 3000 (Rate Valuation Spot/Spot Hedge Accounting) to calculate this piece of the Fair Value.
    We also need to include in the calculation of the Fair Value a component from the valuation date to the contract maturity date. This piece of the valuation is based on an interpolation of the interest rates over the remaining days of the contract (from valuation date to maturity date).
    Can you advise if there is a valuation step or perhaps number of valuation steps that can be used to calculate the Fair Value of a financial contract in line with this requirement? That is to value the contract from inception date to valuation date based on comparing the PV at spot versus the PV at close rate and then to value the contract from valuation date to contract maturity date based on the PV by the interpolated interest rates over the remaining days of the contract?
    Thanks for your advice.
    Mik

    See what other similar ones are selling for:
    http://www.ebay.com/sch/i.html?_odkw=2011+macbook+-pro&_osacat=0&_from=R40&_trks id=p2045573.m570.l1313&_nkw=2011+macbook+-pro+-air&_sacat=0

  • Every BPC Consultant must contribute for this question.

    Dear Experts,
    I am new to SAP BPC.
    I have gained basic knowledge on BPC.
    I have given a basic presentation on BPC in our company by presenting a demo application with consists of Application have dimensions, Security settings, data uploading, BPFs (Business Process Flows) and Reports & Input schedules & Currency Translation scripts.
    Actually, Our Company leads said, u201DWe can also do these features like Reporting & Currency Translationu201D in MS-Excel then what is the use of BPC?u201D.
    I did not able to answer this question.
    Need a Complete picture on BPC. And what exactly the BPC tool is & how it is different from other tools.
    Please explain me what is the Uniqueness & beauty of SAP BPC.   
    Really I need expertu2019s answers.
    I request all BPC consultants to contribute this question by your valuable answers.
    Thanks for your contribution.
    Cheers,

    Hi Kumar,
    The use of BPC is to develop and maintain planning and consolidation platform for an organization to evaluate company performance. When compared with other products, It is a very good product to do planning and consolidation.It is very flexible, user friendly.
    It is not just doing reporting and currency translation. You need to develop a platform. Excel is just an interface that BPC uses and currency translation is part of a task. Excel is more userfriendly tool, that way BPC uses all different functions for evaluation purposes. BPC is got ocean of tools and tsks that you can perform for the evaluations.
    Using Windows MS Excel reporting and currency translation, that will not produce any data base platform neither any flexibility in evaluations.It is just produces a view of some data at some point of time and it is not a data warehouse as well.
    Make sense...
    Regards,
    Sreekanth.

  • Assets: provision for differences between APC and Market Value

    Hi,
    my current client needs to make a provision with the difference between the APC and Market Value in some assets (buildings...).
    Our idea is to use Valuation Area 02 in order to reflect those "Market Values" and create another Valuation Area = 02 - 01. With this area we will have the amount the we need to make the provision in GL.
    I just wanted to know if FI-AA has anything that could make those provisions automatically. I have looked into help.sap.com, customizing etc... and I could not find anything.
    Does anybody knows if there is a standard "provision function" for assets?
    I think that we will need to develop an ABAP program for this requirement...
    Cheers

    not solved but need to close it...

  • Fair Market Value for 2011 macbook

    I have a macbook that is in very good condition. The macbook has a intel core 2 duo processor, 2.26 GHz and 2Gb memory. I have all of the original packaging. I'm looking to sell it and would like to know fair market value. Thank you in advance!

    See what other similar ones are selling for:
    http://www.ebay.com/sch/i.html?_odkw=2011+macbook+-pro&_osacat=0&_from=R40&_trks id=p2045573.m570.l1313&_nkw=2011+macbook+-pro+-air&_sacat=0

  • Data manager option to Append  or Add NW Infocube values to BPC CUBE.

    HI ,
    Merge and Replace optios are just to replace old values with new values. but my requirement is to add new values to old values. Data is available in BW infocube and we need to add values to BPC cube . please suggest is there any option i can use in data manager.
    thanks,
    Bala.

    Hi,
    Currently, the append option is not available while loading the BW data to BPC.
    The option I see is to extract the BW data to a flat file and then upload this file in the append mode.
    Hope this helps.
    Edited by: nilanjan chatterjee on Aug 10, 2011 11:06 AM

  • Fixed Asset: market value

    Hi All!
    Due to IAS we must post an special provision:
    when the inmaterial fixed asset value market is minor than fixed asset net value we have to post a provision by depreciation (in order to reflect the possible loss when we sale it)
    This provision does not affect the fixed asset countable net value. So that provision don't have post in 01 depreciation area. But:
    1- when we sell the assets the provision must appear in the sale affecting to the benefit or loss.
    2- I need to know the provision for each fixed assets. That's why we need SAP shows its in FI-AA area.
    With the transactions under Manual Value Correction folder (fixed asset menu) the fixed asset net value is modified.
    We've tried to implement a second area doesn’t affect to fixed
    asset values from the 01 depreciation area and vice verse to post there this provision. But The system doesn’t allow that (message error number AC528)
    Do have more ideas?
    Thank You in advance

    Hi Vijay, thank you for your answer but...
    It seems that Transferred Reserves is used to sell a fixed asset and transfer the benefit to other asset (If I've undertood right)
    I put an exemple to fix the question:
    I adquiered a fixed asset by 1.000 euros (a building) in 2005
    - Deprecation key: LIND (Str.-line) /  Use Life: 10 years
    In 2007 my building on second hand house market is valuated in 500 euros (minor than fixed asset countable net value 800 euros).
    So I must post a provision by depreciation by 300 euros. That post does'nt affect to fixed asset countable net value (is just a provision). My fixed asset countable net value is 800 euros.
    In 2010 I sold my asset by 1.000 euros. My fixed asset countable net value is 500 euros. So my profit is 500 euros. Then I must to reverse the provision post in 2007 .
    I need to post that provision related to fixed asset but without affect to asset net value, to reverse that in the asset sale.
    Thank You very much
    Francesc

  • Deriving Closing stock value in BPC

    Hello Experts,
    I want to have closing stock (Quantity & Value) in my BPC report, but in BI stock value and quantity is not stored as on date. I can get only Issue quantity/value and Receipt quantity/Value on daily basis, we can accumulate this value to get monthly values.
    Is there a way to get closing stock value from BI/BW.
    Regards
    Bhagyesh Ravange

    Hi Deepthi,
    Difference in both of reports is due to that MC.A is picking the values from stock movements while Z-ALR_87012277 or S-ALR_87012277 is picking the values from the respective G/Ls.
    However If anybody make the direct posting in G/L then this update will be reflect in ALR report but it will not be visible for MC.A or any other stock valuation tcode because direct posting in G/L dosn't involve any material movements.
    Hope you are getting me....
    Kuldeep Dahiya

  • SAP BI -- relevance , market value & future scope ?

    Hi All
    Friends, I hate coding. However I can work well enough on tools.
    I am BTECH  Computers & in IT field for last 6 years, where in I have worked in multiple areas of testing, pre sales, project management.
    Now I am getting an option in one of my project to work as a SAP BI Consultant. It is a support project.
    I am bit confused  --
    1)) should I switch to this SAP BI field at this stage ??
    2)) will this SAP BI provide me long term carrier growth ??
    3)) after HANA , Is SAP BI still relevant and are we getting new clients/projects in the market for this skill ??
    Pls Guide Me.
    Thanks

    Hi All
    Friends, I hate coding. However I can work well enough on tools.
    I am BTECH  Computers & in IT field for last 6 years, where in I have worked in multiple areas of testing, pre sales, project management.
    Now I am getting an option in one of my project to work as a SAP BI Consultant. It is a support project.
    I am bit confused  --
    1)) should I switch to this SAP BI field at this stage ??
    2)) will this SAP BI provide me long term carrier growth ??
    3)) after HANA , Is SAP BI still relevant and are we getting new clients/projects in the market for this skill ??
    Pls Guide Me.
    Thanks

  • Logic doubling and tripling values in BPC 7 MS

    Experts,
    We are using BPC 7 MS and SP5, SQL2008 Server, Recently we are encountering the problems of doubling and tripling of numbers when running the Fx trans, Push logic.
    To fix this issue we have defined measures=periodic in the scope of the logic, then it is working as expected for single company code but when processing all the company codes it's doubling and tripling the numbers.
    Any help will be greatly appriciated! Thanks in Advance

    Currency trabsalation can run many times but this will not create double values.
    You can have the currency transalation into Default Logic and aso you can run DM packages this should not have any impact regarding the consistency of data.
    What kind of application do you have Periodic or YTD?
    I think the problem is here. Because you are tunning the Currency translation for one type of application but actually your application is not that type.
    For example into a YTD application
    2009.Jan  100
    2009. Feb 100
    for LC and we want to translate in USD. (let's suppose the Exchange rate is 1.3)
    You actaully will insert into database
    for USD into signeddata
    2009.Jan 120
    2009 Feb 120
    Which is wrong because in YTD application that's means you will have for 2009.FEB 240
    So actaully the FXTrans has to insert 120 and 0 to be able to have the correct result.
    This is an example with what can be wrong. Of course may be is something else in your case but you have to understand what you selected and how you insert the values into database.
    Just have a look into logic log from Private Publication\Your User\temp and you will find out what is wrong.
    I hope this will help.
    Regards
    Sorin Radulescu

  • How to load no value to BPC appl

    hI Friends,
    i'm loading actuals data from bw to bpc application. some of records in bw cube are not having data for one characterstic (eg: personal area ).
    i want to load exaclty to destination dim without converting/assigning  to any new/old member (i.e simply i want to load space only)
    Thanks,

    Hi Naresh,
    BPC doesnt allow empty values for any of the dimensions in a record. So, you cannot have null value. You need to post the records to some dummy member or based on your requirement.
    Hope this helps.

  • Market value

    what can I sell a thinkpad t60 and t61, in excellent condition? (in italy)

    I'd say 100-125 euros for the T60, depending on its condition and 150-175 for the T61 depending on slew of things (LCD resolution, intel vs. nVidia, condition)...
    Good luck with the sale.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Career in SAP BPC

    Hi Gurus,
    I am a BI guy with over 5 yrs experience & little finance knowledge. Now I have got an opportunity & time to learn SAP BPC.
    So I want to know how much would that be helpful in my career, is it really worth putting the effort, will it be a value addition for my career & how much is it compatible with BI?
    Also pls tell me what will be the scope of BPC in sap or clients going for BPC.
    Regards,
    Sandy.

    Dear Sandy,
    1. A BPC consultant has a good prospect. However, I would suggest you to slowly try moving towards the functional consulting as well.
    2. Currently, BPC is the only tool offered by SAP for doing business planning. Right now lot of customers are going for BPC, and in the near future the requirement is expected to increase more.
    3. Pin pointing at any particular business process will not fair when we are talking about BPC. We can do HR planning, cost center planning, revenue planning, sales planning, financial statements planning. So, more knowledge you have in these areas, the better it would be. Definitely, the knowledge will come with the experience.
    4. BPC is one of the niche areas in the market right now.
    Hope I was able to answer your queries.

  • SAP BPC Advice

    Dear Gurus,
    Recently I was going through one of the SAP Certification (SAP Business Planing and Consolidation). I
    am working as a SAP B1 Techno Functional Consultant and would like to take my skills to one step further.
    Is the BI Package integrative with SAP B-One and what is the market value of the product.
    Your advice will be invaluable.
    Faisal

    You could modify your custom package to perform all the steps thru BPC import and have the user initiate the Package from the BPC Data Manager.  You would just need to add a MODIFYSCRIPT variable (see the standard IMPORT package as an example) and add the BPC tasks required to Convert/Load that data your package already prepares.
    I have had prior success having a custom package initiated from within the BPC Data Manager extract data from an external data source (ie: Oracle), use user provided runtime input to customize data extraction parameters, manipulate the extracted data, and import it into BPC.
    Unfortunately I've never attempted to initiate a BPC task without the package being initiated from within BPC.  But I would surmise that if you provide the proper values for the individual BPC Tasks (ie: Convert and Load) required properties (ie: AppSet, App, User,...), I cannot think why it would not work.

  • BPC or not?

    hello experts
    I have a doubt whether to go for BPC or not...I need your opinions..
    I sold my company which ran into losses last year...learned SAP BW/BI...didnot get till today because of slowdown....but prepared pretty good so far to attend an interview incase job market picks up...
    I heard about SAP BPC recently....Im thinking if i should learn this BPC and try for job on this....I am hoping to get job easily as BPC is new module and there are not so much people who know this...Is there really demand for BPC consultants....?How it will be in future?
    or is it better to stick to BI ,get job,work few years?
    what do u guys think?
    Thanks in advance,
    S

    The two latest aspects of BW which are gaining demand are integration with BO and BPC. I think if you learn both of them then you will certainly get a good job.

Maybe you are looking for