Marketing Attr. tab is not showed to Employee role

Hi gurus
When a BP is created under Employee role, it doesn´t display Marketing Attributes tab, even when I assigned "CRM005 Marketing profile" screen into  BUP1 main screen sequence.
Could someone sugget me some solution?
Thanks

Hi Efrain,
  Why would you want to maintain the marketing attributes for Employee role..the attributes are not role based. It is for the business partner.
So if you maintain the attributes for the 0000 Business Partner (General) role this should be sufficient.
Even though the tab "Marketing Attributes" is not displayed for the employee role, if you select the "Business Partner (General)" role again, you can see that the attributes are still assigned to the partner.
Hope this helps.
Prakash

Similar Messages

  • Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List

    Cycle Count Entries Form not showing specific employee name in "Counted By" LOV List.But the Employee is active . Is there any setup for this activity?

    Hi,
    This is because the query is excluding the current site you are trying to modify since it is actually in the report.
    You can include in your query:
    or site_id = :Pxx_SITE_ID
    Where Pxx_SITE_ID is the item holding the site_id value and xx is your page number.
    Thank you,
    Erick

  • HT5019 I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multipl

    I connect my macbook pro to an Epson wireless projector. The macbook can see the projector wirelessly and the image on the macbook is displayed on the projector. However on system ref., the arrangement tab does not show and thus cannot have multiple view.
    I am trying to project Pro Presenter on the Epson projector such that I have the detail screen on the macbook and only the screen I want people to see on the projector display. This has not been possible because the arrangement tab on the Display section of the System Preference is not showing. If i tried to search for the arangement, it comes back with the message that there is not other source detected, hence the arrangement tab is not showing.
    I have also tried to connect the Epson directly to the Macbook but it still the same result, so its not because it is a wireless connection. Can someone advise me jhow to go around this problem. I have used windows before and it is very easy to extend ptojection on windows, but this system seems to be frustrating to me.
    Thanks,
    Toks

    Hi Toksyb!
    You may want to try clearing out the PRAM on your computer. This process is explained through this article:
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Custom Ribbon tab does not show in generic list

    Hi.
    I'm deploying the following definiton on a generic list, but the new custom tab does not show up. Anyone that can see what I have done wrong?
    Thanks!
    <Elements xmlns=”http://schemas.microsoft.com/sharepoint/“>
    <CustomAction
    Id=”Ribbon.MyTab”
    Title=”Adds a new Ribbon tab to Generic List”
    RegistrationType=”List”
    RegistrationId=”100″
    Location=”CommandUI.Ribbon.ListView”
    >
    <CommandUIExtension>
    <CommandUIDefinitions>
    <CommandUIDefinition
    Location=”Ribbon.Tabs._children”>
    <Tab Id=”Ribbon.MyTab” Sequence=”110″ Description=”" Title=”My Tab Name”>
    <Scaling Id=”Ribbon.MyTab.Scaling”>
    <MaxSize
    Id=”Ribbon.MyTab.Scaling.MyGroup.MaxSize”
    Sequence=”15″
    GroupId=”Ribbon.MyTab.MyGroup”
    Size=”LargeMedium”/>
    </Scaling>
    <Groups Id=”Ribbon.MyTab.Groups”>
    <Group
    Id=”Ribbon.MyTab.MyGroup”
    Sequence=”15″
    Description=”"
    Title=”My Group Name”
    Template=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
    <Controls Id=”Ribbon.MyTab.MyGroup.Controls”>
    <Button
    Id=”Ribbon.MyTab.MyGroup.Button”
    Alt=”Ribbon.MyTab.MyGroup.Button”
    Command=”Ribbon.MyTab.MyGroup.Button_CMD”
    Image16by16=”/_layouts/images/siteIcon.png”
    Image32by32=”/_layouts/images/siteIcon.png”
    LabelText=”Button”
    Sequence=”10″
    TemplateAlias=”o1″
    ToolTipTitle=”Button”
    ToolTipDescription=”Shows a dialog” />
    </Controls>
    </Group>
    </Groups>
    </Tab>
    </CommandUIDefinition>
    <CommandUIDefinition
    Location=”Ribbon.Templates._children”>
    <GroupTemplate Id=”Ribbon.Templates.MyTab.MyGroup.CustomTemplate”>
    <Layout Title=”LargeMedium”>
    <OverflowSection Type=”OneRow” TemplateAlias=”o1″ DisplayMode=”Large”/>
    <OverflowSection Type=”ThreeRow” TemplateAlias=”o2″ DisplayMode=”Medium”/>
    </Layout>
    </GroupTemplate>
    </CommandUIDefinition>
    </CommandUIDefinitions>
    <CommandUIHandlers>
    <CommandUIHandler
    Command=”Ribbon.MyTab.MyGroup.Button_CMD”
    CommandAction=”javascript: alert('Hello World');” />
    </CommandUIHandlers>
    </CommandUIExtension>
    </CustomAction>
    </Elements>

    Hello,
    I was able to use your custom ribbon tab XML just fine.  The only thing is, the copy you provided had a bunch of illegal characters embedded in it (like reverse quotes?), I'm not sure if they're showing up in your version of the XML or not.  Anyway,
    after replacing those with straight quotes and fixing some other misc formatting, it worked fine.  I created an empty SharePoint project and added an empty element, then added your XML to the Element.xml file.  In SP, I created a new custom
    list and the "My Tab Name" tab appeared with a button that displayed "Hello World" when I clicked it. So, I recommend checking the formatting of your XML.  Just look for red squiggles in the editor and fix them.
    Regards,
    - Kemp Brown [MSFT]

  • In iOS 7.0.2 All and Missed tabs are not showing call history correctly

    In iOS 7.0.2 All and Missed tabs are not showing call history correctly, I have iPhone 4 running iOS 7.0.2 version it looks like there is a bug. Missed call history and All calls (incoming, outgoing and missed) history is not showing properly in a list. Ideally when I click on missed it should show me recent missed call list and when I click on All it should show me (incoming, outgoing and missed) calls list sorted by current date and time.
    I would like to request Apple developer team to look into this and fix this bug asap. Thanks in advance.

    Hello gnutellabrot
    Start with the article below to troubleshoot issues with email not sending and downloading to your iPhone.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • UD Insp. Lot stock tab is not showing

    Dear Friends,
    At the time of UD Insp. Lot stock tab is not showing due to which I am not able to withdraw sample qty ,
    can anyone explain how to add this tab.
    Reg: T.code - QA11

    hi sandip
    UD inspection lot tab page will not appear if you have created the inspection lot manually and the lot is <b>not</b> stock relevant
    regards
    thyagarajan

  • My Option window in Firefox displays only partly. I can't change the download folder. 'Browse' is not showing. And the Advanced tab is not showing either

    The Option Window in Firefox is incomplete. It only shows
    General, Tabs, Content, Applications, Privacy, Security, Sync
    The Advanced Tab is not showing and the Browse button to change download location is missing also.

    If you are using an add-on theme switch to the default theme. If that isn't the source of your problem ....
    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Info tab does not show in iTunes 11.1.2 in iPad sync window

    I have OS 10.9 on my iMac, iOS 7.0.3 on my iPad, and I'm using iTunes 11.1.2 . I had only one problem syncing my iPad with the iTunes--the info tab does not show in the sync window. Has the method of syncing calendars changed? How can I do this

    I found the following in another discussion thread:
    If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com. (http://support.apple.com/kb/PH12117)
    Since I do not use cloud computing for security reasons, I will not be syncing my contacts or calendars between devices. I hope the Apple developers rethink this strategy. Meanwhile I'll figure out a work-around as I have in the past when software has an unfortunate glitch.

  • Trying to sync photos from iTunes (via iPhoto) to ipad and iPhone. The  Photo tab does not show up and no sync occurs

    Trying to sync photos from iphoto to ipad and iphone.  Photo tab does not show up in itunes under devices. 

    I had a similar problem (https://discussions.apple.com/message/24525903#24525903)
    The solution in my case was to start iPhoto and let it update the library, even thu itunes was set up to sync with Aperture.

  • Chief HR officer not showing all employees

    Dear Experts,
    I have setup HR intelligence and i am having a problem in HR Chief Responsibility. The responsibility is not showing complete employees of the organisation(in Overview). Can anybody help me out on this one.
    regards,
    Muhammad Noman Shafique

    Couple of things I can think of -
    #1.If you're looking at headcount under a person(manager), make sure all the employees under him have the supervisor data.
    Even if one link is broken in the hierarchy, it might not give you the correct headcount.
    So just check all the employees whi have no Supervisor and update them.
    #2. Same with Location. If you're looking at the employee count per location, make sure the value is populated for all employees.
    All the data you see in the Dashboard comes from HRI% views
    select * from all_views
    where view_name like 'HRIBG%';
    select * from all_views
    where view_name like 'HRI%';
    So you can check the appropriate View and see why the view is not returning data.
    Sorry mate, cant be of more help.. Not sure why it isn't showing the data..
    Cheers,

  • ESS tab does not show up after deploying ESS

    We did every configuration step for ESS and we had no issue before for other projects.
    However this time ESS tab does not show up on EP even the roles are assigned.
    ALL Jco tested OK.
    What could be wrong?
    Thanks for your help.

    Jose:
    Thanks!
    I think I miss
    BP_ERP5ESS
    BP_ERP5MSS
    Because I am at ecc6 enhp4, the matrix at Wiki did not specify above BP version.
    Could you tell me what version of
    BP_ERP5ESS
    BP_ERP5MSS
    should be applied to the EP7.01?
    Follow up:
    Jose: I do see the BP at the same Wiki:
    BP ERP05 ESS 1.41 SP04
    BP ERP05 MSS 1.41 SP04
    BP ERP05 COMMON PARTS 1.41 SP04
    I am going to apply them on the portal. Do you agree? Thanks again.
    Thanks!

  • Reporting Tab is not showing in SCSM 2012 SP1 Console

    I'm working with SCSM 2012 SP1. But after installing data ware house only "DataWareHouse" tab appares no "Reporting" tab. And it shows below MSG:
    And only the below reporting management pack are available in the Data Ware House >> Management pack area.
    I already check data warehouse server 'System Center Data Access Service' and 'SQL Server reporting Service', borth are running. But still 'Reporting' tab is not there.
    Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

    At last I solve the problem. THere is 2 solution for resolve the issue.
    Force start all warehouse job.
    Un register and reregistared DataWareHouse againg.
    In my case I do the borth after reregister datawarehouse I wait 1hr after that I manualy start the warehouse jobs. And it works for me.
    Mithun Dey Web: http://cloudmithun.wordpress.com If this may give your necessary resolution please mark it as Answre.

  • Sales Analysis Item Tab Function Not Showing Orders Dollars

    Hello Gurus of SAP B1.
    This pertains to SAP B1 SP 00 PL 16 Version 8.8. 
    While doing the Sales Analysis function under Sales A/R > Sales Reports > Sales Analysis > Item Tab, the system does not report on the dollars for the day when I select "Orders" or "Delivery Notes'.  The system does display the proper dollars when I select "Invoices" on the "Item" Tab. 
    And the "Invoices" and "Orders" and "Delivery Notes" buttons display correct dollars on the other tabs for Customer and Sales Employee...so why not on the "Items" tab???
    Does anyone know why this might be happening and/or how to fix this???
    Thanks in Advnace - Zal

    Thanks for the quick reply Gordon - hope things are continuing to go well in your new endeavors &;-D
    Well that is really strange that items is handled that way - I have created SQL to get the results but I always like to balance out to what SAP B1 is reporting.  My SQL detail and grand totals are fine by Customer and I have been able to reconcile in that manner, but wanted to reconcile by items also.  I am certain I have done it before in SAP 2007A...
    Has there been a change to the item/sales order table in Version 8.8???
    Take care my FFF - Zal

  • Excise tab is not showing in MIGO

    Here i have created the PO... with TAx code V0 where in Taxes tab it is showing the calculation....
    while doing MIGO it should open the Excise Tab right for this material... it is not showing the Excise Tab... and no Accounting doc got generated..
    Important thing is i have selected the Free of goods check box in PO....but after selecting the V0 it started calculated the tax all excise duties at 0.....thats wat the client want....

    Hi,
    If you want excise TAB at MIGO , you need to do following setting:
    Select Check box of EI capture at MIGO in following path:
    SPRO -- >Logistics general -- > tax on Goods Movements-- >India -- >Basic setting -- >Maintain Excise Groups
    Also set entry of 101 MT for capturing Excise in following path:
    SPRO -- >Logistics general -- > tax on Goods Movements-- >India -- >Business Transactions-- >Specify Which Movement Types Involve Excise Invoices
    Also you need maintaion CIN master data in J1ID for material & vendor.
    NOTE: When you use tax code V0, what are the tax components in V0 .......are  all 0%!
    Regards,
    Biju K

  • Tab does not show when dragged into it's own new window

    This happened after I updated to Firefox 8.0.1. Same problem with 9.0.1. I'm on a Mac running OS X 10.5.8. I have not changed any add-ons, plugins, extensions, or anything like that.
    Every time a tab is dragged from my main window to form it's own new window, the tab button on the new window does not appear. I only have a + sign showing.
    A tab will show when I open a new tab, but the original "tab" does not appear. The + sign also appears on the left side of all new tabs. Isn't it supposed to be on the right?
    If I have 2 "tabs" open but only have 1 tab showing and try to close the window, Firefox asks me if I'm sure I want to close the 2 tabs.
    Tabs when opening blank new windows work properly. Dragging a tab to an already opened window works fine as well.
    Most of the time a tab is dragged out on accident, and it is quite annoying because I can't drag it back into the main window.
    Any help or suggestions would be greatly appreciated.
    Many Thanks!

    I found the cause but no solution, it's actually a plugin that does that: divx plus weblpayer (it gets installed when you install DivX on your system), if you disable it and restart firefox it all works again. But I want that plugin... so DivX need to fix this, unless it is a Firefox bug in its own core... anyway these two together creates the problem.
    (I'm running Firefox 9.x on OSX Lion)
    I also wish firefox tab tear out tab worked more like chrome's tab tear out, much friendlier...

Maybe you are looking for