Marketsite purchase order not going through

Hello everyone!
Has anyone ever used the marketplace adapter to send POs to a marketsite? We are able to see the PO message in the marketsite logs but can't seem to have it converted into a Purchase Order in the destination.
Does anyone have a clue as to what might be causing this? I know the possibilities are endless but if anyone has a sample XML that was successfully sent to a marketsite, that would be very very helpful.
Regards,
Glenn

hi
ref this
http://help.sap.com/saphelp_nw04/helpdata/en/1a/ef487f5b680f4c84d632cfe76ec8cb/content.htm
Target Address for "Marketplace-Adapter" on Marketplace
Problem with Marketplace Adapter
Market Place Adapter
DDID value is something like the DUNS number. You need to get the DDID number from your client.
Thanks

Similar Messages

Subscription purchased; calls not going through

Hi I am not able to call any mobiles and cell from Skype...yesterday only I subscribe for 800 min to India for 1 month
Subject/title edited.
Solved!
Go to Solution.

Hi Naveed_1!
Please be aware that due to local restrictions and regulations, Skype has been partially blocked in the UAE. You can still make Skype-to-Skype calls and send instant messages, but you will not be able to access our website or use some Skype features, such as calling mobiles and landlines. And Dubai is in the UAE so you will not be able to call numbers using Skype. You will need to contact your local telecommunications and/or internet authority for more information.
As for your refund request, you will need to contact Skype Customer support and check with them if your request can be granted. You can learn how to contact them by viewing the link below:
https://support.skype.com/faq/FA1170
Hope this helps.
James
Did my reply answer your question? Mark it as a solution to help others, Thanks.

Im trying to make a purchase on a gaming app. It's a 50 dollar purchase of diamonds(tokens) for a game called warrior's 3, and for some reason it's not going through this is the fourth time this has happened to me and every time you say just wait thirty

I've already gone into my settings and checked billing info and it's correct. Can you please help I don't want to wait till morning when Apple is open again finally.

Who says 'wait thirty' ? We are fellow users here on these forums, you're not talking to iTunes Support nor Apple
What do you mean by 'not going through' ? If you are getting an error message then what does it say ?
If you are getting a message to contact iTunes Support then you will need to do so : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

I purchased a new monthly-paid subscription for 1 year(light room).i uninstall it from my desk top and try to install on my lap top. keep getting error saying trial expired.live chat is not going through and i am struggling to get it install.

I purchased a new monthly-paid subscription for 1 year(light room).i uninstall it from my desk top and try to install on my lap top. keep getting error saying trial expired.live chat is not going through and i am struggling to get it install.

Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
What it is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
PS - you did not need to uninstall from your desktop to install on your laptop
Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
-Both computer Cloud subscription activations may not be in use at the same time

Change Purchase Orders not to be send to external catalog vendors via XI

We are working on SRM 5.00
When ever we create Purchase Orders from External Catalog a mail goes to the vendor via XI in XML language.
That is fine. However when we change any thing on the Purchase Order a again mail goes to vendor.
Our requirement is to send the Purchase Order only when they are created and not when they are changed.
How do we manage this in SRM.
Will badi ZBP_SAPXML1_OUT_BADI help us
thanks

Hi,
See these related notes:
Note 881650 - Duplicate transfer/output of the purchase order
Note 1015245 - Changing PO fields which are set as E generates new output
Note 659386 - PO output in case of customer field changes
BR,
Disha.
Do reward points for useful answers.

Online no is not going through

Hi there,
from couple of days, the person who is calling at my skype no are saying the call is not going through. can someone please sort this mette out ASAP

As I replied in your duplicate thread, these are user-to-user forums, you are not talking to Apple here.
You can contact iTunes support via this page :http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then probably Purchases, Billing & Redemption

HT5085 I need to download an application to my I pad but it' not going through the massage I have is tha I have to switch to uk store

I'm trying to download some application from App Store I'm abroad now using wifi but it's not going through I have a message saying that I have to switch to uk store before purchase what to do to solve the problems..

System Preferences > Security & Privacy > General
Unlock the lock if you have to. Click the lock and authenticate.
"Allow applications downloaded from:"
Select "Anywhere".
Best.

I made a purchase in an app. The app closed and I assumed that the purchase did not go through because it did not appear when I reopened the app, so I "re-purchased it". I was charged twice, but only received it once. What can I do?

I made a purchase in an app. The app closed and I assumed that the purchase did not go through because it did not appear when I reopened the app, so I "re-purchased it". I was charged twice, but only received it once. What can I do?

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

Open Purchase Orders not considered as requirement for MRP Run

Hi ,
We are facing a issue of Open Purchase orders not appeared in Stock requirements list and also it is not considered as requirement for MRP Run against reservation.
As aresult for a reservation demand of 10 units we are ending with Open POs 10 units and a additional planned order 10 units.
Material Type : ERSA
MRP Type : PD (or VB)
Lot size : EX ( HB if MRP Type is VB)
Could you please throw some light to correct our settings to MRP to consider Open POs?
Saravanan

Can you check to see if there is a re-order point set up for this materia? That could be causing the problem too.

Emails from the organization are not going through ePrint

Hi,
I've been having some issues with the ePrint feature that's configured in one of the printers that we have in our office. The printer is a HP LaserJet 200 color MFP M276nw. Every other client from other email addresses such as Hotmail, Gmail or any other address are able to send emails to our ePrint address and are able to print on it successfully. However, all the emails that are being sent from within our organization are not going through. We get an unsuccesful delivery message from the Exchange server stating that
The server has tried to deliver this message, without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk
We had checked with our Exchange administrators and they have advised that the email is trying to be sent, but in the destination it is being rejected. How can I get this issue to be addressed?

Hello praveen_haridas,
Welcome to the HP Support forums. I understand that your corporate emails are failing when trying to send an email to the Laserjet 200 MFP 276nw printer's ePrint email address.
Are you getting any messages about the failed messages in your ePrintCenter/HP Connected account? If so what does the message state about the failed job?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Officejet 6700 Fax not going through

When I try to send a fax, it dials but never connects?

Hi @Carlita61,
Welcome to the HP Forums!
I noticed that the fax is not going through with your HP Officejet 6700. I am happy to look into this for you!
What type of phone service do you have? Analog or digital? Analog. Digital. What’s the Difference?
If the phone service is analog, please see this guide, Cannot Send or Receive Faxes.
If the phone service is digital, please go to this guide, How to connect your HP Fax Device to an ISDN, ADSL, PBX, or VoIP line. Note: HP fax devices are designed to work with traditional analog phone services. They are not designed to work with digital phone services such as ADSL, PBX, ISDN, or VoIP. While HP fax products are not supported on these types of lines, they might work given appropriate setup and equipment.
To find out if your phone service is analog or digital please contact your phone provider.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Goods receipt for purchase order not allowed for a particular wbs

hello everybody..
Am creating a good receipt for a purchase order using the T-CODE-: MIGO...
While doing so am getting an error as " goods receipt for purchase order not allowed(wbs element)".
What can be done to rectify this error?
Plz do help me....
Regards,
Deepika
Moderator message: not directly related to ABAP development, please have a look in the appropriate functional forum, study the long text of this error message.
Edited by: Thomas Zloch on Dec 1, 2010 5:52 PM

Hi Br. Ajay M,
Released the order and Status line as follow
REL AVAC BUDG GMPS
but the error changed while reverse the document
item 0001 Order is invalid.
Many thanks for your kindly reply.
regards,
Steven

Service Account details are not going through header(OSB Business service)

Hi
I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
Can someone please help me why service account details are not going through business service request. Am I missing any steps?
Thanks in advance
KK
Edited by: 966531 on Oct 23, 2012 4:23 AM

Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
Regards,
Anuj

Purchase Order not subject to release strategy for contract rel. strategy

Hello, I am trying to set release strategy for contracts (TCODE: ME31K). I have created characteristic, which use table CEKKO and field name BSTYP in Addnl data tab. I have checked values, and they are correct. Then I have assigned in release strategies in classification view value contract. But when I try to check release strategy in ME31K with green flag, it display error: Purchase Order not subject to release strategy. (I have tried to do the same strategy in purchase order, of course with value Purchase order, and it works nice).
So I have checked this release strategy with this codes:
CL24N ok,
CT04 ok,
CL30N ok,
CL20N ok,
Release simulation in release strategy works,
Then I found out that I should check SE38, SE37 but I do not understand how to use them (according: Purchasing Document Not Subject to Release Strategy).
Thank you for your help in advance.

I haven't said to use EKPO table in characteristics. You have to use CEKKO - BSTYP in characteristics.
I've just said the compare the value which you have given in Release strategy - Classification and EKPO table for the particular contract.
Also compare your release strategy settings with many existing documents in SCN.
Check your Classification should be like that.
You may see the error message in ME31K. Just save the contract then go to ME32K/ME33K or ME35K you can see the release strategy will effect for the contract.

Purchase order not create in sus

Dear customizer,
Ihave implemented a plan driven procurement with sus (r/3-sus) scenario,we have a problem when we transfer idoc from r/3 to sus.In sus sistem give me this error message
"An error occured within an XI interface: Exception occurredE:BBP_PD:BBP_PD:051 -No address found for partner function type Sold-to Party E:BS:002 -"Create" is not allowed (SUS Purchase Order 4500000006 )CX_BBP_BD_ERROR===============CP; Include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>"
I hope in your answer.Thank best regards.
Pernasetti Alessio

Hi,
Please check the following things.
Check whether the roles delivered by SAP meet your requirements. If not, you can create new roles and assign transactions to them. We recommend that you copy standard roles and tailor them to your requirements.
All users assigned to a respective role are then allowed to carry out the transactions. If required, you can refine the authorization check on the tab page Authorizations.
Standard SAP Single-roles
SAP_EC_SUS_ADMIN_PURCHASER (for purchasing administrators - SAP Supplier Self-Services)
SAP_EC_SUS_BIDDER (for bidders - SAP Supplier Self-Services)
SAP_EC_SUS_DISPATCHER (for dispatchers - SAP Supplier Self-Services)
SAP_EC_SUS_INVOICER (for invoicers - SAP Supplier Self-Services)
SAP_EC_SUS_ORDER_PROCESSOR (for order processors - SAP Supplier Self-Services)
SAP_EC_SUS_MANAGER (for managers - SAP Supplier Self-Services)
SAP_EC_SUS_SERVICE_AGENT (for service agents - SAP Supplier Self-Services)
If you want to use SAP Supplier Self-Services, proceed as follows:
1. Select one of the following single roles:
SAP_EC_SUS_ADMIN_PURCHASER
SAP_EC_SUS_ADMIN_VENDOR
SAP_EC_SUS_BIDDER
SAP_EC_SUS_DISPATCHER
SAP_EC_SUS_INVOICER
SAP_EC_SUS_MANAGER
SAP_EC_SUS_ORDER_PROCESSOR
SAP_EC_SUS_PRODUCT_MANAGER
SAP_EC_SUS_SAR_PROCESSOR
SAP_EC_SUS_SERVICE_AGENT
SAP_EC_SUS_SERVICE_MANAGER
2. Choose Change Roles.
3. Choose the Personalization tab page.
Note: The personalization applies to all roles, meaning the user can also create his own roles, for example copying the delivered SAP SUS roles. He can tailor these roles to his requirements by changing the SUS-specific attributes (BBP_SUS_ROLE_ATTRIBUTES).
1. Select the entry BBP_SUS_ROLE_ATTRIBUTES (SUS-specific role attributes).
2. Choose Change values.
A dialog box for maintaining SUS-specific roles appears.
3. If required, perform the following steps:
If the role should be displayed in the SUS User Management (UM) and should be able to be assigned to the relevant user by the supplier administrator, set the indicator to display the role in SUS UM.
If the user should be displayed as a service agent for the purchaser, set the Service agent indicator.
If you want to define the user as an SRM administrator, set the SRM administrator indicator. The user is then authorized to change all supplier data.
If want to assign the role SUS administrator automatically to the user during registration, set the SUS administratorindicator.
Sets the relevant indicators if you want users to receive the following notifications: Notification If Purchase Order Not Opened, Notification If Purchase Order Response Is Missing, Notification If ASN Is Missing, Notification If ConfirmationIs Missing, Notification If Invoice Is Missing,
Award the points for the help.
BR,
Vijay Mittal

Marketsite purchase order not going through

Similar Messages

Maybe you are looking for