Marking an in or out point in the event browser changes the selected clip

I'm getting quite infuriated with this issue at the moment. I'm not sure if it's a bug, or I'm doing something wrong.
I've created collections of subclips by tagging ranges with keywords in the event browser. I'm now trying to edit these onto the timeline. I find the clip I want in the browser and use JKL and IO to mark the in and out point of the actual part of the clip I'm going to use. The problem I'm having is that sometimes - not all the time - pressing I or O changes the selected clip in the event browser.
Any ideas what's going on?
Many thanks in advance for any help you're able to offer.

Changes how? Post screen shots of what you're seeing and what you expect to see.

Similar Messages

Does Editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

Does editing a clip after using the "Open in Timeline" command in the event browser alter the source media file?

C5ELEN wrote:
. Didn't we have that in 7? Seems like I remember we could set the number of undo levels.
Legacy FCP has Revert Project to return to the last saved version, and it has Restore Project to go back to one of the autosaved versions. The maximum number of undo's can be set in user preferences. A lot different than X.
Russ

Marking while playing video in the event browser

I recently switched from PC to Mac specifically to edit our home family videos. My question is how do I mark an end point in my video when viewing the video in the event browser? I understand that I could select a range of frames by clicking and dragging the yellow selection box, however I want to play the video (using the spacebar)and then stop, and mark, the video at a certain point. As soon as I move my cursor, the playhead disapears and I loose my last position. I am forced to click and drag the right of the yellow selection box to my end point but I find it not as precise as simply marking a spot while playing live playback. Any suggestions?

While playing the clip in the event browser (with nothing selected):
- press spacebar to pause
- press shift+right-arrow to mark the in point
- press spacebar to resume playback
- press spacebar to pause
- press shift+right-arrow to mark the out point
You can now use left and right arrow keys to move your entire selection or use shift+right-arrow and shift+left-arrow to move the out point and resize your selection. When you're done, press E to add the selected range to the project window.

SCCM 2012 R2 Cu1: Can I reinstall the Reporting Services Point role without delete or change the SSRS-DB?

Hi, I have some issue with the reports,
Can I reinstall the SCCM Reporting Services Point role without delete or change the SSRS-DB (just reset the SCCM SSRS function)?
I have saved/backup the custom made reports.
/SaiTech

Yes you can remove and reinstall the Role. I had to do this recently on our SCCM 2012 R2 due to an issue with the reports not loading. Found out that the problem with reports was from the upgrade to R2 from 2012 SP1 and was able to run
a command to re-register the reports with WMI. I actually removed the role, uninstalled reporting services feature from SQL, deleted the report databases, reinstalled the SQL feature, configured the reporting databases again, added the role back, and
ran the following command.
mofcomp "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof"
This allowed all my reports to register as they should have and run without errors. If you are having similar problems, you may be able to just run that command to get reports running without all the extra work I did. For us we were getting an
invalid Class error in the srsrp.log.
Brian

I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an a

I would suggest a new feature:The possibilty to change the mouse pointer icon when you hover on an active link by any other one icon I select.

Current Firefox versions have a feature called tear-off tabs.<br />
You can detach a tab from the current window and open it in a new window by dragging a tab in the browser window.<br />
You can drag that tab back to the tab bar in the original window to undo that detaching.
bug489729 (Disable detach and tear off tab):
* https://addons.mozilla.org/firefox/addon/bug489729-disable-detach-and-t

How do I add web part in the event receiver after the site is provisioned in SP 2010?

How do I add web part in the event receiver after the site is provisioned in SP 2010?

You try the below steps:
1. Use long operation to provision the site, so that it does not time out in process.
2. After provisioning, you can add a page or add the web part directly to landing page of site.
For each of the above steps you can find the sample code pieces.
if you couldn't get that, let me know. I will share with you.
Thanks, Ashish If my response has helped you, please mark as answer.

How to search markers in the event browser

Hi !
I work on long documentaries and I have hours of interview I go through, and I put markers on it.
option - M, and a few words describing what the person in saying, so that I can quickly come back to that moment if needed.
The thing is that I cannot find any way to search through my markers in the event browser ... Is that normal ?
I can't find a list of all my markers to see exactly what I wrote and what was the timecode...
The thing is that I don't wanna bring all those clips to a timeline to do that, because I would have to make so many timelines just for that... Waste of time and energy.
Is there a way to achieve this basic thing of searching through markers in the event browser ?
And if it does not exist, is there a way to tell Apple that they should make this possible ?
Thanks.

Hi Tom,
Thanks for your reply. I can actually go to the clip with the search function but I won't be at the specific marker with the entered text.
And the thing is that I have tons of markers on a single interview clip (1 hour long). So If I search for a work I marked at a certain TC, the search
will bring me to the clip and not to the exact moment in the clip where I marked it.
Also, I'd love to have a list of all the markers I make + the timecodes so I could have a quick look at all the markers in the event browser,
but it seems like it's not possible...
Thanks anyway... I'll use the Feedback menu

Can I edit the rpt file & change the datasource before loading the report?

We are an ISV and our application has a lot of reports. Our reports use a SQL Server database as the data source and each SQL Server at our customer sites has a different name.
In our testing we have determined that ReportDocument.Load tries to connect to the SQL Server that is saved in the RPT. If it can't fine the SQL Server saved in the RPT the load take about 60 seconds while it is waiting for the SQL Server Connection to time out.
We are using the Visual Studio 2008 version of Crystal Reports. This did not seem to be a problem with VB6/CR8.5.
We would like to edit the RPT and change the data source to the appropriate SQL Server before we call ReportDocument.Load.
Is it possible to edit the rpt file and change the data source before loading the report?
Or is there some way to tell Crystal not to try connecting to the DB
during the report.load?
In our case we will NEVER use the data source that is saved in the RPT, we will always change the data source using ApplyLogOnInfo.
Thanks

HI Todd,
You Can Not edit the report document before ReportDocument.Load() because if you dont load the report then you dont have anything to Edit
But as far as changing the datasource is concerned you can change that at runtime.
For changing the datasource following code will help you if both databases have a same schema :
Code for changing the database
ConnectionInfo crConnectionInfo = new ConnectionInfo();
crConnectionInfo.ServerName = "SERVER";
crConnectionInfo.DatabaseName = "DATABASE";
crConnectionInfo.UserID = "USERID";
crConnectionInfo.Password = "PASSWORD";
// Loop through the ReportObjects in a report and find all the subreports
foreach(ReportObject crReportObject in crReportDocument.ReportDefinition.ReportObjects)
     // Check the kind of the ReportObject, if it is a subreport
     // proceed. If not skip.
     if(crReportObject.Kind == ReportObjectKind.SubreportObject)
          // Get the SubReport in the form of a ReportDocument
          string sSubreportName = ((SubreportObject)crReportObject).SubreportName;
          ReportDocument crSubReportDocument = crReportDocument.OpenSubreport(sSubreportName);
          // Use a loop to go through all the tables in the main report
          foreach(Table crTable in crSubReportDocument.Database.Tables)
// Get the TableLogOnInfo from the Table and then set the new
// ConnectionInfo values.
TableLogOnInfo crLogOnInfo = crTable.LogOnInfo;
crLogOnInfo.ConnectionInfo = crConnectionInfo;
// Apply the TableLogOnInfo
crTable.ApplyLogOnInfo(crLogOnInfo);
// Set the location of the database. This value will vary from database to
// database.
crTable.Location = "DATABASE.OWNER.TABLENAME" or crTable.Locations;
The sample for doing this is available on support site.
Thanks,
Prasad

What is the procedure to change the owner of the BW jobs.

Hi Gurus,
Version- BW 3.5
I need to change few jobs Owners which are collected from the SM37 from a individual User to generic account(ALEREMOTE).
Will any body help me out with the procedure to change the owner of the BW jobs.
Thnaks in advanace..
With Regards,
MBS

in SM37, take all release jobs by giving JOb name as "" and user as "".
When you get the release job details then follow the steps.
1. Select theJob --> Menu Bar --> JOB --> Change --> here you will get the details of the job and Clieck on STEP just above the job name.
In the next screen select the job and click on Change ICON. here you can see the user name in change mode and you can update the user to ALEREMOTE. And then save the job.
Once done then the job will be on the new user.
Hope this helps..

HT1751 i bought a new, larger external hard drive. copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive. iTunes will not start or run unless old hard drive plugged in.??

I bought a new, larger external hard drive. I have my iTunes library on the external drive instead of C: drive, Using Windows 7.
I copied my itunes library from the old drive to the new one, changed the libarary location in Edit/Preferences/Advanced to the new drive.
iTunes will not start or run unless the old hard drive is plugged in.
If I disconnect the old drive iTunes shuts down.
Any ideas. ??

Hello kskip,
Thank you for providing so much information about what is going on. It sounds like you have setup iTunes to save new content to your new external hard drive in iTunes>Preferences, but it sounds like iTunes is not opening iTunes Library.itl file on the new external drive. You have one last step to take to have iTunes point to your new external hard drive rather than your old one:
Steps to create or choose a different iTunes Library file
If iTunes is running, quit iTunes.
If you are using Windows, hold down the Shift key and from the Start menu and choose All Programs > iTunes > iTunes.
You should see the following screen:
Additional information
If you do not see the screen above, then you did not hold the correct key at the correct time. You may want to try again. Note that if you pinned iTunes to the Start menu programs, and open it that way, it may not work.
Once you select "Choose Library," you will need to navigate to the iTunes Library.itl file on your new external drive.
You can find the full article here:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
Thank you for using Apple Support Communities.
Best,
Sheila M.

How do you make Firefox the default browser when the normal way doesnt work?

Im trying completely from chrome after a friend showed my how much firefox has got its act together. However i cant for the life of me set it as the default browser. I have tried the "make firefox the default browser" button in firefox, which simply opens the windows default programs panel. Whenever i try to use the panel it simply sets the http protocol to nightly which isnt even installed!( http://puu.sh/2vJHM ) I think a possible fix would be to manually change the registry, but i wouldnt know where to start.

Did you check the box on ''Options > Advanced > General >[X] "Always check to see if Firefox is the default browser on startup"?
Have you restarted Firefox and if so, or when you do so, what does that section on the advanced Firefox options show?
Have you tried restarting your system after setting the default browser using the second suggestion and, after restart, check the setting per the second suggestion to see if that setting is holding?
Updating your Plugins would have no affect on the default browser question. It was something that you needed to do to avoid security issues online by using an out of date version of Java. Java is not involved in the default browser issue. That is why I separated it from the first part of the reply with a line and began with the word "Other".

I dropped my iphone vertically on the ground. The screen is normal when it is locked. but when unlocked, it is broken down from the clock. Can it be fixed and is it under the warranty conditions? If not how much is the price to change the screen?Thanks

I dropped my iphone vertically on the ground.The screen works when it is locked.When unlocked, it's broken down from the clock.Can it be fixed and is it under warranty conditions?If not how much is the price to change the screen?Thanks

User damage is not covered by warranty unless you have Applecare +
assuming you do not, the out of warranty exchange price for an iPhone 4 is $149,exchange at an Apple Store genius bar
iPhone 4 are not repaired they are exchanged

How will I block/restrict the user to change the payment term in FBL5N?

Hi All,
How will I block/restrict the user to change the payment term in FBL5N????
I have tried on following objects:
F_BKPF_BLA
F_BKPF_BUK
F_BKPF_GSB
F_BKPF_KOA
F_IT_ALV
F_KNA1_BED
F_KNA1_BUK
F_LFA1_BUK
S_ALV_LAYO
But, not succeeded.
=>Actually user runs FBL5N, double click on a record then click on Change icon.
=>Change Payment Term.
Please reply ASAP. Point will be awarded.
With Best Regards
Dharmendra

Hi Dharmendra,
Please set an authorization trace in ST01 and then ask the user to execute the transaction and the steps on the same application server as the o ne on which the trace has been set (valid in case we are talking about mutiple application servers for same <SID>). After this is done switch off the trace,list it and fill all the authorization objects. That might give you the perfect idea.
Regards.
Ruchit.

Button catches the Event only on the second click

Hi Experts,
I am new to adobe forms and facing a very strange problem. I have 2 buttons on my interactive form "SUBMIT" & "APPROVE" , now the problem is whenever i load my application(Webdynpro ABAP) for the first time and click any of the 2 buttons the event
ONSUBMIT of the ui element Interactive form is not caught(control doesnt reach the event) , but when i click any of these buttons from the second time the control reaches the breakpoint successfully.
I donot understand where i am going wrong , is there some java script that needs to be written in the initialise event of the buttons to make them trigger the event from the first click itself.
Thanks In Advance,
Chaitanya.

Hi Chintan,
Thanks for your replies, there wasnt any specific reason for using check field buttons was just experimenting with the component.
Script in the Click event for button 1:
// DO NOT MODIFY THE CODE BEYOND THIS POINT - 802.20071213024549.437972.422152 - SubmitToSAP.xfo
                      ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
                      // END OF DO NOT MODIFY
Script in the Click event for button 2:(i am setting a flag when it is clicked)
                    var ref3 = xfa.resolveNode("xfa.record.APPROVE");
                    var ref2 = xfa.resolveNode("xfa.record.APPROVE").value;
                       ref3.value = "X";
                      // DO NOT MODIFY THE CODE BEYOND THIS POINT - 802.20071213024549.437972.422152 - CheckFields.xfo
                      ContainerFoundation_JS.SendMessageToContainer(event.target, "submit", "", "", "", "");
                      // END OF DO NOT MODIFY
Version of ALD : 8.1
Adobe Reader : 8.
Should there be some code written in the initialize event of the button ?
Thank you for your help so far,
Chaitanya.

Weird behaviour in the event browser

I don't understand why, if I browse, say, a clip in the event browser (i.e. with 10s duration represented thumbnail) browsing on the clip with the mouse and going down in the display, if I move the mouse and accidentally get it close to the scrolling side bar, the clip visualisation returns to the previous position... In this way I lose the point where I was arrived to, and I have to rescan the clip... Very very annoying and time consuming...

Not at all certain I understand what you're saying.
If you have skimming on and you move the skimmer beyond the end of a given clip the skimmer should appear in the adjacent clip in the browser.
Russ

Marking an in or out point in the event browser changes the selected clip

Similar Messages

Maybe you are looking for