Marking Source In Point Zoom the clip since update CS6 6.0.4

Since I updated Premiere CS6 to 6.0.4, the source clip (in the source window) zoom in each time I mark an in or out point. I have to drag the little grey bar to zoom back the entire clip in view.
I tried changing keyboard shortcuts to default Premiere CS6 and others but it's doing the same thing.
What's up? Am I the only one with this behavior?

...I generally find that I take my best footage from the middle of clips. I get everything set at the beginning, and let it run long to make sure I get everything. But the center is usually the sweet spot of the clip.
Steven, I am afraid you have completely missed the point.
In the above images I have a one minute and fifty one second
production music audio file loaded into the Source Monitor.
The Source Timeline is zoomed out to include the entire clip.
The Playhead is parked at one minute and fourteen seconds.
After marking an in point, only the first thirty six seconds of the
audio clip is visible in the Source Monitor, and the marked in point
has completely disappeared out of view.
It would not be as bad if at least it zoomed in to center
the marked in or out point in the Source Monitor view.
Try dealing with that for a couple of days of real editing.
Or, use CC7.

Similar Messages

Yosemite starts up twice all the time since update

Yosemite starts up twice all the time since update, haven't done the PRAM reset but was hoping I didn't have to do that, does anyone know why it does it?

Good news re it stopping
For Modesty0007,
If the problem doesn't occur on a new account it most likely means you have a process running on your other account that uses up a lot of CPU, making your computer temperature go up and the fan spin harder in turn.
Go back to your usual account and have a look in Activity Monitor to see if you have a process running that fits the description.

How do you mark your 'in' point with the keyboard?

I know you can mark the first frame of your selection by hitting the mouse button but I find I press the spacebar to start previewing the source footage and stop the playhead at just the right point where my 'in' should be. Now as soon as I move the mouse the playhead jumps to a different part of the clip, this results in me losing my 'in' point.
What I want to do is hit the spacebar to stop at just the right point, hit a key to mark my selection, hit spacebar to resume playing and then finally hit shift-A to mark my out. Any ideas?
Thanks,
Dave

Could you describe your workflow in producing Quicknotes.
Basically I use a screen/system audio capture application to capture what I am doing in an application along with any audio being produced. There are many such applications available, but I tend to stick with Snapz Pro X which I have been using for years. My somewhat old PPC G5 limits me to captures of about 960x540 at 24 fps. This step, of course takes place in "real time." With iMovie '08, I would had to transcode the captured data to compatible compression formats, but with iMovie '09 it looks like I can go back to using the default Animation video codec which I prefer.
Once the screen captured data is stored to a file, I bring it into iMovie for a quick edit -- usually just a quick trimming of the length, adding a title, and adding simple opening/closing cross-fades. When done, I output the edited content via the "Export Using QuickTime" option -- normally as AIC/AIFF but will likely try Animation/AIFF on my next one. The editing process takes only a few minutes but exporting adds additional time.
At this point I import the edited file to GarageBand for a quick voiceover. I use this approach so I can keep a copy of the iMovie exported file for reuse at some later time. (My original intention was to eventually go back and correct my voiceover mistakes but I never seem to get around to doing this as some new project is always coming up.) For this step I generally use a Blu "Snowball" USB mic. In any case, the voiceover is also in real time. I normally export the finished file using the "Full Quality" mode so as to avoid a further transcoding of the video track. (It also saves time if no video re-compression has to be performed.)
At this point it is merely a matter of targeting my final output. For my web content, I usually use MPEG Streamclip to convert the GarageBand file to an H.264/AAC file with a targeted video data rate of 1.0 Mbps. If I decide to post the file in an MOV file container, I then open the file in QT Pro and set the "poster frame" for iWeb use. If for any reason I wish to preserve the MP4 container, I use iTunes to "poster frame" the file.
As previously implied, I use iWeb to actually post the file. In this case, the tutorials are posted to a separate "Podcast" page collection since the are easy to maintain; allow user comments, RSS notifications (which I've never tested), and searches (also untested). Primarily I liked the ease with which I can duplicate a previously posted video entry and simply drop in the new clip and modify the text changes. Posting the update is, of course, as simple as pressing an icon button and waiting got the upload to finish.
I have completed the work flow in as little as an hour but my average is closer to 90-120 minutes since my wife and/or pets usually want some sort of attention during the process. You may have noted Gracie (a Congo African Grey) or Mango (an Amazon Orange Wing) in the background of some of my voiceovers. And that, as they say, is all there is...
You should really consider posting these on YouTube.
Not really something I ever wanted to do. I have my own MobileMe account, most viewers I'd want to reach are Mac owners and users, so I am not really interested in reaching out to the "world at large."

Computer has not been the same since updating a few weeks ago

Updated my 4GB Core 2 Duo Macbook Pro to OS X Mavericks. My battery now last 2 hours per charge and every program runs slow. This is frustrating me to the point of defeat. I have no idea what I need to do to remedy this problem. I have a business to run. If Apple is not up to the task of fixing this problem it may be time to move on to another operating system.

Hi MichelPM,
Thank you, I have taken your advice and posted the below. However, since installing Mavericks on my computer, there is nothing else installed on my computer since that point. I had installed a thing or two, but taken them off since.
Hardware Information:
          iMac (24-inch, Early 2009)
          iMac - model: iMac9,1
          1 2.93 GHz Intel Core 2 Duo CPU: 2 cores
          8 GB RAM
Video Information:
          NVIDIA GeForce GT 120 - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 0:17:9
Disk Information:
          Hitachi HDT721064SLA360 disk0 : (640.14 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 573.49 GB (449.94 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
                    Untitled (disk0s4) /Volumes/Untitled: 65.79 GB (10.28 GB free)
          OPTIARC DVD RW AD-5670S
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Keyboard Hub
                    Apple, Inc Apple Keyboard
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [kext loaded] org.virtualbox.kext.VBoxDrv (4.2.18) Support
          [not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.18) Support
          [not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.18) Support
          [kext loaded] org.virtualbox.kext.VBoxUSB (4.2.18) Support
Startup Items:
          VirtualBox: Path: /Library/StartupItems/VirtualBox
Problem System Launch Daemons:
          [failed] com.apple.DumpPanic.plist
Launch Daemons:
          [running] com.absolute.rpcgeo.plist Support
          [running] com.absolute.rpcnet.plist Support
          [loaded] com.adobe.fpsaud.plist Support
          [not loaded] com.adobe.SwitchBoard.plist Support
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.adobe.CS4ServiceManager.plist Support
User Launch Agents:
          [loaded] com.adobe.AAM.Updater-1.0.plist Support
          [loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
          [not loaded] org.virtualbox.vboxwebsrv.plist Support
User Login Items:
          Steam
          iTunesHelper
          Dropbox
          LOGINserver
Internet Plug-ins:
          Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
          FlashPlayer-10.6: Version: 11.7.700.203 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
          Flash Player: Version: 11.7.700.203 - SDK 10.6 Outdated! Update
          Default Browser: Version: 537 - SDK 10.9
          QuickTime Plugin: Version: 7.7.3
          OfficeLiveBrowserPlugin: Version: 12.3.5 Support
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
          iPhotoPhotocast: Version: 7.0
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          CitrixOnlineWebDeploymentPlugin: Version: 1.0.94 Support
          WebEx: Version: 1.0 Support
3rd Party Preference Panes:
          Flash Player Support
          Flip4Mac WMV Support
Time Machine:
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 534.10 GB Disk used: 115.06 GB
          Destinations:
                    Data [Network] (Last used)
                    Total size: 2
                    Total number of backups: 162
                    Oldest backup: 2010-09-30 21:42:56 +0000
                    Last backup: 2014-05-06 01:01:39 +0000
                    Size of backup disk: Excellent
                              Backup size 2 > (Disk size 534.10 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               2%          WindowServer
               0%          mds
               0%          SystemUIServer
               0%          fontd
               0%          aosnotifyd
Top Processes by Memory:
          156 MB          mds_stores
          156 MB          Safari
          123 MB          com.apple.IconServicesAgent
          82 MB          Finder
          82 MB          Dropbox
Virtual Memory Information:
          4.49 GB          Free RAM
          2.46 GB          Active RAM
          280 MB          Inactive RAM
          801 MB          Wired RAM
          258 MB          Page-ins
          0 B          Page-outs

Repeats the first 20 secs of the song since update 7.0.1.8

Hi,
Ever since the update from iTunes to v. 7.0.1.8 my iTunes sorts of crashes when it starts a new song (from a list)
Whenever I start a song and my mainscreen is iTunes nothing is wrong, but whenever I got another window open (for example, i.e/msn/my documents whatsoever) my iTunes keeps repeating the first few seconds of a song for about 20/30 secs whilst playing the song. So I keep hearing the tunes of the first 20/30 secs of a song mixed with the song. (understand what Im trying to say?).
Anyone got the same problem or has an answer to my question?
Thank you

Tried searching for a driverupdate, but couldnt find anything. My soundcard = Creative AudioPCI (ES1371,E1373)(WDM) Version: 5.2.3633.0

My keypad is in the middle of my screen and I want it on the bottom since update, My keypad is in the middle of my screen and I want it on the bottom since update

Since I did the last update my keyboard is in the middle of my screen I want on bottom how do I get it there every time I try to touch keyboard bottom with dock and split but it won't do nothing

If the keyboard is split and covering your text, Pull the two ends of the keyboard together - into the middle of the screen. You can also tap and hold down on the little keyboard icon in the lower right corner of the keyboard and select - Dock and Merge.
If the keyboard is up on the middle of the screen, but not split, and you want to move it back to the bottom - tap and hold down on the little keyboard and icon and select - Dock
You can turn the split keyboard off in Settings>General>Keyboard>Split Keyboard>Off.

Fan running all the time since updating

Since I installed the 10.5.7 update yesterday, the fan on my iMac G5 1.8 has been running continuously... I would be very grateful if anyone can suggest something to fix this... sigh...
Geoff

THANK YOU!!!! That did it!!! I have known about that trick although I didn't know the correct terminology for it... but never considered it.. I shut it down and did as the procedure recommended and disconnected the power and other cables for 30 seconds and then reconnected and restarted ... hear that??? NOTHING!!!! Thanks so much for your great suggestion!!! Much appreciated...
Geoff

What Is The Point Of The Login & Keychain Update?

I installed Leopard on Friday.
It did not and still does not recognise my Username and/or Password.
I note that a Login & Keychain Update has appeared in Software Update, its purpose being to address login & password issues "where the password is 8 or more characters".
(1) I cannot install the Update because Leopard does not recognise my password.
(2) My password is only 7 digits long yet I'm still unable to access my iMac properly.
What's the point of issuing an Update for people who are unable to install it?

Hopefull you will have already seen other posts explaining how to get past the login problem. This worked for me:
1 Boot up from the install disc (hold down C key when restarting).
2 Launch the installer as if you are going to install.
3 From the Utilities menu, select reset Passwords
4 In the username field type: System Administrator (root)
5 In the password field type the password you want to use
6 Quit the change passwords app
7 From utilities, select Start Up Disk. Choose you HD as the start up disc and restart
8 Once restarted, select accounts from the System Preferences menu
9 Click the lock at the bottom left
10 When asked for username and password, enter System Administrator as the username and the password you changed earlier as the password
11 Click the enable user to administer computer check box for your account. Your account should now change from Standard to Admin.
After I did that I could log in and download the software update. I was connecting via Ethernet. However, once thte update was installed my PB G4 stated that I do not have an airport card installed (which I obviously do). I still haven't found anything that works for me to fix that. I have given up for the moment.
Hope this helps

My new I pad continually and intermittently loses access to the server since updating an App

My new I pad continues to intermittently lose access to the server following my updating an App

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can't connect to the internet since updating

A few nights ago I got a message that there was an update for my AirPort Extreme. It was late, I was tired and I clicked "ok".
I have not been able to connect to the internet via the AirPort Extreme since then– right now I'm on dial-up.
I took the AirPort Extreme off line and connected my Mac directly to the DSL modem and it worked.
Earthlink, my ISP, says to configure the AirPort Express using DHCP. When I do, I get a message that my wireless device does not have a valid IP address.
Something's not clear to me in the set-up for the AirPort Express. It asks if I connect to the internet directly or through another device, like a router. Prior to re-installing the AirPort Express, I connected my DSL modem directly to my Mac. But I want to connect the DSL modem to the AirPort Express and then connect the Mac to the AirPort Express. Are they asking for my pre-install configuration or do they want me to tell them how I'd LIKE IT TO BE CONNECTED?
If I can connect to the internet via a direct connection to my DSL modem, what is the correct procedure to set up the AirPort Express between the DSL modem and my Mac?

OK, I got it working. Not really sure how, but I'm on the internet and I can stream iTunes.
I figured that the settings of my successful connection, (sans AirPort Extreme), should have some bearing on how I made settings in the AirPort Utility, so I opened System Prefs, clicked on Network and made the prefs in the AirPort Utility match up as best I could.
Then I got ambitious and got the AirPort Express to work, sort of. I can stream iTunes to the Living Room AirPort Express, but when I try to play through multiple speakers, I get an error message. But I had this trouble before the update.
When I look at the Network prefs now, it says that I'm connected to the wireless network I set up on the AirPort Extreme via my AirPort card and it says that Built-in Ethernet is set up to use PPPoE and the cable for Built-in Ethernet is not plugged in, (it is in fact plugged in).
I'd rather be connected to the network via Built-in Ethernet, but for now this will do. I have other things that need doing.

Macbook Pro 2012, updates before logging in all the time since updated to Yosemite

My macbook 2012 on turning on says user and then in brackets update required. It updates so slowly! Even after letting the update complete three times it still says it needs updated.. Help, its really annoying!

I haven't tried this with Yosemite.
Hide Update in Mavericks

I have a problem with the maps since updating to ISO6.

The maps are significantly inferior to the google maps. The routes are incorrect - ie, takes me on the longest possible route and there is no streetview. To say I'm disappointed in this 'upgrade' is a massive understatement. It is clunky, and of very poor quality. I'm also disappointed that YouTube app was deleted in this upgrade. How can I convert back to ISO5 - or when will Apple fix this problem and revert back to the google maps?

I do not agree with you. I find Apple Maps are more interesting, correct and fast. I am so glad the old Google maps are gone.
You can wait forever or use Safari and make a shortcut to https://maps.google.com
As for YouTube, you can download the YouTube iPhone app from the App Store.
And no, downgrading was never support.

How do you set the in point of a clip?

I'm using the timeline template that has a number of clips flying by and I need to adjust the in point of the clips. To be clear, I'm NOT trying to adjust the point that the clip appears in the timeline but instead the portion of the clip that will be displayed as it fly's by within the Motion timeline.

All that that seems to do is set the in point of the clip on the Motion timeline. Again, what I am attempting to do is change what is seen on the particular clip that has been dropped into this template. Where the inset clip window appears on the timeline is fine but I want is a later portion of the video within that clip to be shown as it is flying by. As it is now the clip is just beginning to show the footage I want as it is flying out of view.

Color is changing the clips in and out points

I tried to import into color a fcp7 sequence. The original footage are quicktime clips.
When the project opens in color, the in and out points of the clips are not there and it gives me the beginning of the clip.
With other footage that I ingested in FCP I don't have a problem.
Can someone explain this to me.
Thanks

>The original footage are quicktime clips.
What FORMAT of Quicktime? Because QT is just a container that can be one of a dozen codecs. Color ony works with certain codecs, like ProRes, HDV, XDCAM, DVCPRO HD. If the codec is anything but those...it will have serious problems.

Is there a way to make the clips pane wider?

I would like to widen the area where the clips are stored, and possibly shrink the preview window.
It's a pretty standard function in most applications and usually requires hovering somewhere along the dividing line until cross hairs show up. But I don't see this anywhere in iMovie. Does anyone know of a way to do this?
Thanks.
noodle--head

Thanks, Matthew.
Adding bookmarks might do the trick for what I am doing right now. I never really looked into it because I assumed it's focus was on creating chapters for an eventual DVD, which was not what I was interested at the time. But I'm trying it out now as a temporary split - a "marker" where I can go to later on and make final decisions as to whether to cut out a segment - as opposed to what I have been doing which is splitting clips and deleting parts, but being reluctant to Save. As a result, I have Saved As and created new versions, or iterations. Not very economical. Using markers, I can mark my edit points, Save the project before it crashes, and later make final decisions.
Hey, I'm bumbling along but learning.
Not too keen on the shuttlepro but thanks anyway. I know there are applications out there that allow for slow speed advancement of video while hearing the audio, but I guess not in iMovie.
nnooo-dlehead ssslowto catchon

Marking Source In Point Zoom the clip since update CS6 6.0.4

Similar Messages

Maybe you are looking for