Marks And Bleeds Not Working

Hi,
I am running Mac OSX 10.4.11, Adobe Acrobat CS3, and have a Canon Pro 9000 printer. When I go to set up a document to print and click the advanced button to get to the advanced print setup screen, I then click on marks and bleeds, but the check boxes are grayed out so I cannot select the trim marks option. I could in my version of Acrobat Pro CS1.
Any help would be greatly appreciated.
Paul

Hi Jon,
Thanks for the reply.
Is the PDFMark data new to the CS3? I could use the trim marks in the CS1 version of Acrobat. Also, when I export to PDF from Quark, I export to Acrobat version 5. Do you think if I exported to a higher version I could get the bleed marks to work?
Thanks again for your help,
Paul

Similar Messages

  • Illustrator 10: Marks and Bleeds

    I'm using illustrator 10 to design some bumper stickers. To prepare for printing, the print company I'm using told me to expand the background at least 1/16 of an inch outside the setup box. Then when I'm saving the file to PDF format (save as), I was told to go to the marks and bleeds window on the settings panel and enter .0625 in the top, bottom, left, and right boxes. I can expand the background, but I don't see the marks and bleeds window when I'm saving to PDF? Am I missing something? I know there's a marks and bleeds window in CS3. If there's not one in Illustrator 10, how can I do accomplish what the printer wants? Thanks..

    Thanks a lot for your reply but unfortunately the native files are
    LiveCycle...
    B rgds
    vioh94,
     
    If the native file is InDesign then in the Export -> PDF dialog, you will
    find a tab on the left named Marks and Bleeds. Check the boxes for the
    marks you require. The exported PDF will display all marks according to
    the parameters you assigned in InDesign. You could also save the settings
    as a new preset if the setting are used constantly. Illustrator CS4 too
    has a similar functionality.
     
    As far as I know Illustrator CS3 is a bit more diificult as on export
    cropmarks are assigned to the artboard size and bleeds marks have to
    inserted manually. Very tedious work until the upgrade to CS4.
     
    I'm sure heaps of people would appreciate a solution to inserting bleed
    marks in Illustrator CS3.
    >

  • Book Mark Icon is not working?

    Hi,
    There is an Adhoc query created by the end user.The book mark icon available is not working but the CONTEXT MENU on any of the values is producing the book mark properly.Can just any one help me to find the solution of this?
    Why BOOK MARK ICON is not working?
    Please correct me if I am wrong.
    Book mark is URL we are getting after the clcking on the EIther on the ICON or context menu option.This URL can be used any where where ever is required.Right?
    But In my case the URL Content is chainging based on the Adhoc query designer.Only characterstics are again and again changing but key figures are original only.
    please help me?

    U mean to say the Book Mark URL created on one system will not work on another system right?
    =>the Book Mark URL created on one system may not work on another system right? in fact in 80% cases it works...
    But what once I execute the query in portal I will be getting an URL.This also can be used as Book mark right?
    =>yes, it can be used,,,
    but the URL generated with the function of the BOOK MARK is only called as Book mark why is it?
    => let me explain this with an example ... there is a BW server physically located in France and can be accessible across all the location wherever project is running. Somebody try to access the Query URL from Gurgaon (one of the project location)which was executed in France may not be run in Gurgaon (Page cant be displayed) because port # in the URL may be blocked in Gurgaon due to security reason,,, this case we have to contact the admin ,they will enable the port..same case i have faced

  • Book mark Icon is not working in Adhco queries?

    Hi,
    There is an Adhoc query created by the end user.The book mark icon available is not working but the CONTEXT MENU on any of the values is producing the book mark properly.Can just any one help me to find the solution of this?
    Why BOOK MARK ICON is not working?

    Hi,
    I observed the same, Book Mark Button availabe on web report is not working but Book mark URL can be saved with the context menu -> bookmark.
    need to check the Web template for  Book Mark.
    Bookmark URL can be saved and that URL is used to go fastly to the requied navigation fastly, that is the use of Bookmark
    hope this helps
    Regards
    Daya Sagar

  • Usb composite device is an older usb device and might not work in USB 3

    I recently bought one Lenovo Yoga 2 11 laptop running Windows 8.1 (64 bit).
    When I try to connect my old Brother MFC-3240C printer using USB (2.0), it doesn’t work.
    Below are the steps performed:
    Connected the printer to USB 2.0 port on laptop (on the right side). Automatically installed the printer driver (no exclamation mark beside printer icon)
    When the printer didn’t print, I tried to use troubleshoot as below:
    Control Panel->Hardware and Sound->Devices and Printers->Right Click on Printer Icon->Troubleshoot.
    It came up with USB composite device is an older usb device and might not work in USB 3.0
    Removed the printer and re-installed the driver. It is all the same.
    Any help will be greatly appreciated.
    FYI – the same printer works fine with my older laptops running Windows 7.

    Already checked Brothers website for the printer drivre for Windows 8.1 (64 bit).
    It says ... The built-in driver is already included with Windows® Operating System or is available through Windows® update.
    So, installed the default driver for the printer that is available with Windows 8.1.
    Even connected the printer with USB 3.0 port on the laptop, but it is all the same.

  • Webcam and bluetooth not working in my G570 on Win7 ultimate

    Webcam and bluetooth not working in my G570 on Win7 ultimate.Reinstalled the drivers.No avail.Web cam icon is not visible anywhere in the system.Only proof i have is there is a cam looking at me on the lid on top.Tried Fn+esc .did not work.Please help.......

    hey Nambiar,
    uninstall both webcam and bluetooth drivers from device manager. let windows install its generic drivers.
    once done, see if you're able to use it.
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • InDesign CC 2014 Marks and Bleeds Issue

    Hello Everyone,
    So I'm trying to export this InDesign file into a PDF with the usual crops/marks/bleeds that I always use, but for some reason this time it isn't working right. I have my bleed settings to .125, my slug is at 0, my images have been dragged past the red crop line on the design file, but for some reason the crop marks are in the white outline area instead of inside the bleed like they're supposed to be. Can someone please tell me what I'm doing wrong here? This ad is due pretty soon so I would be most appreciative for quick replies!
    Thanks,
    Krystin

    I set the export using document bleed settings. Below are images of the design file itself, my document setup, and my marks and bleeds settings in my export box. Thank you for all your help!

  • Mark debug 'sometimes' not working

    I find mark debug sometimes not working.In my new project ,I add mark debug = true, then set up the debug nets.I can't find them in the assigned nets ,but from the netlists I find some of them.The missing nets are wire type,notregister type.Does the command not work on wire type nets?
    Because my project is very large, searching for the nets requires a very long time.So I hope Xilinx can fix this bug.

    Rather than open another thread, I'll extend this one since I'm having what I think is the same problem.
    I'm using Vivado 2014.4.  "Flatten" is set to "None".  The nets are set in the elaborated design with MARK_DEBUG and DONT_TOUCH.  But when synthesis gets done with them, the names are completely different.
    I don't care if the "equivalent" nets are still there.  I need the names.  Every time synthesis runs, it's a crapshoot whether the names will change.  Particularly bad are 500+ bit buses that get exploded into individual signals.  I don't have the time to regather them into the proper buses every time.
    In general, I've been pleased with the changes in Viviado.  But I can't believe how badly a wonderful tool like ChipScope has been screwed up.
     

  • Keyboard and mouse not working

    both keyboard and mouse not working. I have changed batteries and checked drivers  please help..  thank you
    This question was solved.
    View Solution.

    Thanks for the information, that is exactly what I needed.
    If you are having the enter issue when using the wired KB from your old computer that sounds software related with the blog site.
    What web browser do you use when on that website?
    Connect your wireless equipment back and if you continue to have the issue with the letters repeating then you should inquire about a replacement for what is referred to as "sticky keys".  With it being a new unit this shouldn't be an issue.
    Let me know if you have other questions.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Had to reinstall lion because of my error, but now a lot of apps. are showing up on my dock as question marks and will not open.

    Had to reinstall lion because of my error, but now a lot of apps. are showing up on my dock as question marks and will not open.

    Ive gotten the question mark icon thing, and I just took them off the dock and redragged them onto the dock from the Applications folder again and they worked fine.  Mine were a couple of game type programs nothing major yet.  Just wanted to throw that out there though since I had that happen with a few dock icons.

  • Keyboard and touchpad not working

    Good day My keyboard and touchpad stopped working all of a suuden, and I need help. My computer is Toshiba Satellite E55 A-5114, this has happened to me before but only the touchpad stopped working and it fixed whenever there was a system update, now I've updated the system and installed the recent drivers and still not working, any ideas?

     
    Satellite E45t-A4300
    There appears to be an epidemic. My guess is that a Windows update which changes a driver causes it.
    So turn off automatic update and inspect them one-by-one. They are offered on the second Tuesday of each month.
       Windows Update: Frequently Asked Questions
    I install only those marked Important or Critical. In particular, stay away from those which change a device's driver. Get driver updates only from Toshiba.

  • I buy a new compaq presario cq57 408tu but its bluetooth and wifi not working even installing driver

    i buy a new compaq presario cq57 408tu laptop , but its bluetooth and wifi not working even installing all driver

    Hey there. You didnt state what operating system you are using but I was able to find two articles that should help resolve your issue. 
    Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
    Fixing Bluetooth Issues
    These articles will go through all the basic troubleshooting steps. Let me know if this helps resolve the issue at all.
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • [SOLVED] Xorg and keyboard not working after upgrade.

    Hi guys,
    after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
    I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
    Any hint?
    How do you recover a system once it's gone like this? Many thanks in advance.
    J
    Last edited by ifsixwasnine (2013-12-23 13:58:16)

    WonderWoofy wrote:
    I wouldn't necessarily call this [SOLVED].  At best I would probably mention that you found a workaround.  The addition of '(downgrade)' likely makes it fine, but just FYI for future threads.  There are two reasons for this.  One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
    Just my 1.46¢
    You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
    Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
    The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
    1. Chrooted into the system
    2. Wiped /boot
    3. Re-installed grub
    4. Re-installed linux kernel
    5. Re-created grub.cfg
    6. ???
    7. Profit
    I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

  • HT1766 4 voice memos in iTunes backup from iPhone had ! marks and would not play so I deleted them and although they are still on the iPhone, they will not sync back to iTunes from iPhone.

    4 voice memos in iTunes backup from iPhone had ! marks and would not play so I deleted them and although they are still on the iPhone, they will not sync back to iTunes from iPhone.

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • Wireless network and bluetooth not working on touchsmart 600

    This has not worked since day 1 and I have been using wired internet.
    I really need to setup a home network and need to use wireless.
    Research on the net has led me to belive I should have HP WIRELESS ASSISTANT on my machine... is that correct?
    Everytime I try to download it is seem to be for a notepad... mine is a touchsmart desktop...
    Please advise  

    Hi coffee12345,
    Welcome to the HP Forums!
    I have read your post on your wireless keyboard and mouse not working with your desktop, and I would be happy to help you! To begin, I need to ask you a few introductory questions:
    What is the Product and Model Number of your desktop?
    What version of Windows are you using?
    Is this a recent issue, or has it been like this since day one?
    Are you using a USB hub to connect your peripherals or is it directly plugged into the computer?
    Please re-post with the necessary information, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Maybe you are looking for