MARS 55 License Key

I recently purchased a MARS 55 appliance for a client. I obtained a SCL from Cisco which was registered and I obtained a license file same day. After initializing, i tried to complete the configuration via the GUI interface. The appliance did not bring up a License Key Link, but in the License Info Box, it says "none", which means it doesn't have the Local Controller key, so even when i try to upload the license file i received from Cisco, it tells me the license is invalid. Am i doing something wrong? I have re-imaged the appliance twice with the recovery CD that came along with the box, but I'm not making any progress. Please help!!

I walked in this morning and had a similar issue.
I login to the MARS 50 running 6.0.2 code and it tells me the license key is invalid. I doublechecked the appliance itself and the key is correctly entered.
We did have a power outage over the weekend and am wondering if that had anything to do with it.
Or did the license expire?
I'll post my findings but hope to also hear from someone in this forum.
Thanks.

Similar Messages

Open vnc asking for license key

Hi all,
I am trying to install the free version of vnc on my RHEL box:
[root@erp virtualbox_4.2.6]# uname -a
Linux *********** 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
[root@erp virtualbox_4.2.6]# rpm -Uvh vnc-4_1_3-x86_linux.rpm
Preparing... ########################################### [100%]
1:vnc ########################################### [100%]
Checking for perl... [OK]
Checking for uname... [OK]
Checking for xauth... [OK]
But when I am trying to run it, it is throwing following error message:
[root@erp virtualbox_4.2.6]# vncserver
VNC(R) Server 5.2.0 (r118477) 64-bit (Jun 3 2014 10:59:51)
Copyright (C) 2002-2014 RealVNC Ltd.
VNC is a registered trademark of RealVNC Ltd in the U.S. and in other
countries.
Protected by UK patent 2481870.
See http://www.realvnc.com for information on VNC.
For third party acknowledgements see:
http://www.realvnc.com/products/vnc/documentation/5.2/acknowledgements.txt
Error: No license keys found.
Run vnclicense to apply a license key. [NoLicense]
Why is license required for free version? Am I doing something wrong here?
Regards,
Vinod

You may have installed the VNC enterprise verison. https://www.realvnc.com/products/vnc/documentation/4.6/unix/unixlicense.html
However, why bother installing VNC? Virtualbox ships with a build in VNC server. Please check the Virtualbox docu.

SOS! The database does not start and the license key can not be installed.

Hi,
I have installed the SAP Netweaver 200s testdrive on linux x86-64. I have got the hardware key and requested a license key. I have received an E-mail with the license key (N4S.txt) attached.
Unfortunately, I am not able to active the installation with this license.
I always get the error: "open of N4S.txt failed: No such file or directory"
I have renamed the license as N4S.rpm but it still not working.
Furthermore, I could not start the database in the previous step. I have got the error: Database failed to start.
Does anyone already have the same errors? Your help will be so greatful.
Thank you.
Jodie

Hello,
yesterday, I have tried your propositions but nothing doesn´t change.
@Joe
"You might want to check installation log files.."
I do it but I did not see any error.
@Marcel
"Which Linux distro did you use?..."
I have the linux Opensuse 11.1
@Hannes
"you mentioned, that you are not able to start the database. Unfortunately, your error message
does not give us any details of what happened"
I follow the Installation´s help file of SAP, I didn´t have any error before this step of the Installation (Start the Database: entering the command startdb).
1) did the installation finish successfully?
Until the request of the License key, the installation goes without errors.
2) logon as n4sadm (su - n4sadm) and execute: startsap n4shost
What is the output?
"No start profiles found"
3) check /home/n4sadm/startdb.log (or any other start*log files there)
This is the content of the startdb.log file:
lun. mars 2 23:05:13 CET 2009
LOGFILE FOR STARTING DATABASE
Trying to start database ...
lun. mars 2 23:05:13 CET 2009
Checking required environment variables
SAPSYSTEMNAME is >N4S<
Start database with xuserkey >c<
lun. mars 2 23:05:13 CET 2009
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
lun. mars 2 23:05:14 CET 2009
Starting XServer
12798 NISERVER NI support started.
WNG 12453 NISSLSRV NISSL Init: SSL: Could not locate licence file
12902 XSERVER started, 'X64/LINUX 7.6.00 Build 018-123-119-055'
lun. mars 2 23:05:14 CET 2009
Starting database
Starting Database Instance...
Error! XUser not found!
Opening Database...
Error! XUser not found!
lun. mars 2 23:05:15 CET 2009
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed
Thank you for another propositions
Jodie

I am having to reinstall Adobe Pro because of a hard drive failure. I have lost the License Key and need to know how to retrieve it so I can reinstall the product.

How do I retrieve the Adobe Pro License key/# so I can reinstall on my computer. I had to have the hard drive replaced due to failure and don't have the necessary information to reinstall Adobe Pro.

As this was a 1,000 USD + purchase I did registered back in 2008 when I got my copy of "Adobe Creative Suite 3 Design Premium". And now I'm in the same situation as you. I did go to manage my account and found my serial number.
My disk crashed completely and I got everything back and running from my Time Machine backup. A few days ago Illustrator said there was a licensing issue. I tried all their gradual solutions up to the very last one: Reinstalling.
I did that and inserted the Serial number; it worked. Now that I'm opening the Adobe Acrobat Pro it requires me to input the serial and it says is invalid!
Anyone has an idea about this?

How do I enter CS6 license key when Adobe Application Manager immediately tries to authenticate against my expired Creative Cloud membership?

I have CS6 Master Suite installed along side my now-expired Creative Cloud apps (I am evaluating whether to renew my subscription at this time). Both CS6 and Creative Cloud are currently unlicensed due to a snafu with my educational license, but I have a new CS6 license that I am trying to register CS6 with. However, upon launching any CS6 program, Adobe Application Manager then launches and tells me that my Creative Cloud membership is now expired. How/where to I enter my CS6 license key? I have already tried entering my new license on my Adobe account profile > “My products and services”, and reinstalled CS6 applications from my original disk image (MasterCollection_CS6_LS16.dmg).
Thanks in advance,
Liz

Figured this one out from another thread, after which I was able to sign in again with my Adobe ID and my software was ready to use:
Windows:
Delete these folders
SLStore from C:\ProgramData\Adobe
SLCache from C:\Program Files (x86)\Common Files\Adobe
OOBE from C:\Users\(Your Username)\AppData\Local\Adobe
Mac:
Delete SLStore and SLCache from /Library/Application Support/Adobe
Delete OOBE from ~/Library/Application Support/Adobe

Need help in activation a license key in CCT. It works as a trial now

Need help in activation a license key in CCT. It works as a trial now

1st the sata drive cannot be listed as a slave drive to the ide master [key word=ide-can be configured as master OR slave, master IF only 1 hd, master and slave IF 2 hds], on the sata controler you can have master and slave, the ide cable has two connectors for the hds, sata has only 1 hd connector.
are you wanting to install the sata as primary master and move the operating sys to that drive, if so you will need an IMAGING software to move an operating system OR you could do a fresh operating system install to the sata drive then install your programs.

Not able to get the license key..

i have purchased a new pendrive.. and on the pendrive I was provided a free anti virus.
the link is provided dere and mentioned redeem your license key (the information is provided on the cover of the
pen drive..)http://nortonactivate.com/compaign/fm1301
2. It is written that I have to open the link and download Norton antivirus..
however, I have opened the link as mentioned above. the link does not open and
http://nortonactivate.com/compaign/fm1301the issue is this the link does not open. It is provided that on this link i have to register myself. then i will get license key on my mobile.
this link does not open > http://nortonactivate.com/compaign/fm1301hence, i dont get the license key to download the free antivirus provided with the HP pendrive.
And i also called up at HP customer service they told me that from wherever i have purchased the product. the retailer should have provided me Product key. i purchased it online. if i provide them with the product key.they will help me to download the software.
hence, i am not able to download the free software that i am provided with pendrive.please open the link. if there is any help that you can provide i shall be thankful to you..thanking you

Sorry for the inconvenience caused. The link you have typed is incorrect. Please use the correct Web address: http://www.nortonactivate.com/Campaign/fm1301 for the redemption. Enter the code you got along with the pendrive and provide any other details as requested. You will get the Product key for activation with a valid subscription of 1 year. In meantime, you can download a 30 day trial of Norton AntiVirus from our web site:http://us.norton.com/downloads-trial-norton-antivirus Once you get the Product key, you can simply complete the activation and continue to use it for 1 year. Thanks!HarryNorton Support

ASA 5505 Failure replaced and need to move the license key?

Can someone point me in the right direction? My ASA 5505 died due to a power surge and I swapped it with a spare. I had Security Plus and a 50 user license and need to move the license keys from the failed ASA 5505 to the new one. I kept both my emails with the activation keys, but not sure how I get this transferred? Thanks in advance.
Joe

I think this is totally unacceptable. For anyone else who uses a 5505 at home and has bought licenses and the hardware out of their own pocket, the idea here should be that you've already bought the hardware and the license. Seems obvious, right?
Yes I can see the license being device specific if not only because that's the way you've designed your licensing activation schema; but if I've just had your product fail and bought another replacement, there should be an understanding or agreement between Cisco and the user that we can reinstate any licenses we've already bought.
Do you really believe it's fair to make someone buy something from you twice, something that they've already bought from you? Do you actually believe that? I believe that the people in the Cisco Licensing department would agree with my viewpoint and I have a pending case with them for this issue right now. I will post my result here.
Make your products last and perhaps I can give credence to your licensing beliefs, until then your products fail and so does your licensing logic.

SAP license key error: no valid license found: cannot log into SAP GUI

I deleted temp license from slicense on SM box, since I had already installed new digital license from SAP. Well, later I tried to log in again and was locked out. After some research, I found "sap license check failed" in the log files, java will not come up, and the hardware key has changed on me, so the valid license that was active before is not showing up now.
I applied for a new license with new hardware key and attempted to install from cmd prompt, using saplicense -install ifile=c:license.txt, but it gets an error. I put a trace on it and appears it cannot read license file key. I also tried to install another temp license, but that failed since no other previous valid license was found. At this point, I'm thinking I need to manually insert the license key into the database, but not sure what table or exactly how. SAP has not provided a solution yet.
I believe the hardware key changed due to renaming the server (we took out a hyphen in name) and had also reinstalled afterwards.
Has anyone else run into this issue?

Yes, I wish it were that simple, but I cannot even bring up the logon screen. SAP GUI returns a message, resource temporarily unavailable. I looked in SAP MMC syslog and found several entries, "SAP-Basis System: No license found for hardware ID DLIC_HWIDKE"
I tried to install temp license from cmd prompt, but it says refuses and says no old or expired license found. I also tried to install the new license I applied for from SAP with new hardware key using saplicense -install ifile=license.txt and that failed as well.
For NW2004s, is it even possible to install a digital license using cmd prompt?
Ben

How do I find my old License Key?

I am trying to track down one of our old license keys for Crystal reports desktop designer V8.5.
We are running software which uses crystal reports to print out transmittals.
Due to a change in the company, the logo's on the reports need replacing. The only version of Crystal reports designer which is compatible is V8.5, which I have but the License for it was lost before I started working at this company.
Would there be a database where the keys are kept?

Hi Ryan,
You can get license key from
-Click on Help -> About Crystal Reports..
-Try to find from Registry Editor:
Click on Run->Type regedit ->
Expand Software folder->Crystal Decisions-> search for Keycodes
you can also try to log a incident for keycode:
For a new key:
Request key codes for new orders via SAP Marketplace (SMP), will receive a download letter on new purchases providing them with their SMP login credentials. Using these credentials you can login and click in the "Keys & Requests" tab > Request a License key.
If your Key code does not work
You need create a customer message https://websmp107.sap-ag.de/message using component XX-SER-LIKEY-BOJ.
Regards,
Shweta

Could not type in license key

I read DFS Admin guide and want to find Register License method...I find the section on P.84...but I have a problem....I could not see the [Register License Key] from my DFS Conosle.Whether I install DFS Fail not not ??
wyldkao

wyld,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

How to add License Key For Integration Tool kit For SAP in Linux Server

Dear Experts,
We are Using BO XI R3.1 SP3 Enterprise Version ,Integration Tool Kit For SAP,Live Office.
The Server is Linux Server.
But while generating reports in Infoview it is giving error like ""_check that you are licensed to access SAP Data Source_".
So we came to know that license Key might Expire for Integraton Tool Kit For SAP in Bo Server.
So can you tell me how to add the license key For BO XI R3.1 SP3 Integration Tool Kit For SAP in Linux Server.
Thanks & Regards,
Venkat

On Unix / Linux you should be able to leverage the response from Raphael and change:
Location＝%BOBJDIR%/bobje/data/.bobj/registry/software/business objects/suite 11.5/sap/keycode/.registry
For more information verify the below link
[How do you update the SAP Integration Kit license?;
Regrads
Pardhu

When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation. --- " cache File Read error"

When i try to install iPlanet App Server on NT, I do not get screen to enter license key valid for evaluation.
Also during installation screens an error window is displayed saying "cache File Read error -- Could not read ProductKey entry from the cache file "

Hi,
I also get the following message:
"Could not read ProductKey entry from the cache file"
I have no idea how to provide the installation software with the key. I also tried "keycheck.exe"
Do you have a solution for this problem? Did you finish the installation?
Christian

I bought a new pc with windows 8.1. I want to install photoshop elements 10 (nl version) on my new computer, but I lost my license key. I deleted everything from my old computer. What do I have to do?

On my old PC with windows XP I was working with photoshop elements 10 ( NL version).
Now I bought a new faster PC (windows 8.1) and installed photshop elements 10 (L version on that new PC.
The problem is that I can't find my license key. The old PC is gone so I have a problem activating photoshop elements 10 on my new PC.
What can I do to get it running?
Best regards,
Gobi345

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Windows 2008 Server License Key not working on VirtualBox

I have a validated licensed copy of Windows 2008 Server and I need to load it on a Virtual machine (I am running Oracle VirtualBox). When I had the server running on a hardware based server it worked fine. The license key activated and it worked. Now when
I load it onto the VirtualBox solution it fails. It will take it when I run the manual command but will not show my server as activated. This is for my private use only (internal home LAN) but I would prefer to have the activation be correct since I use this
setup to help keep fresh on Windows 2008 servers while being on a Linux OS with a VM software loaded. What can I do to have this server activate correctly under the VirtualBox?
Thanks,
Tom

Hi Tom,
Base on my experience, after we convert a physical computer system to virtualize environment we need to reactive it, with MAK active method we need keep this vm to connect to
internet and with KMS method please confirm this vm can communicate with your KMS server.
The related KB:
Understanding MAK Activation
https://technet.microsoft.com/en-us/library/ff793435.aspx
Volume Activation in Disconnected Environments
https://technet.microsoft.com/en-us/library/dd981010.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

MARS 55 License Key

Similar Messages

Maybe you are looking for