Mars sending an email with an empty recipients.

Dears,
The CSMARS is sending an email notifications with an empty recipients and empty message-ID when an incident rule fired, so emails stuck in the exchange server and never reach any of the admin accounts, at the same time reports are sent correctly via emails.
It is CS-MARS-20 and it is processing high number of events per second, i am not sure if this is a system failure or there something else, in the attachment you will find a sample of the emails sent by MARS, any troubleshooting tips will be great.
Appreciate your help

Hello Muhannad,
From the Initial Conguration Guide:
"One of the required settings for MARS is the e-mail address for the system administrative account, pnadmin. The MARS Appliance uses this e-mail address to deliver import notifications and reports about system status"
Have you configured the email settings for the System Administrative account?
This link describes that procedure:
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.1/initial/configuration/setup.html#wp1030836
Hope this helps.
Warm regards,
Neal McNamara

Similar Messages

How do I send an email with blind address recipients?

How do I send an email with blind address recipients?

When you open a New Message there's a little box with three lines next to the Subject Box. When you click it you get a drop down menu with a list of options. Click on Bcc Address Field. That will add a BCC box to your message.

Send bulk emails with only the recipients name appearing in the TO field when they recieve it

Hi
I want to know if Mail or any third party software will enable me to send a bulk email to a group in my address book with the recipeant only seeing their name and not the names of all the others in the group email.
I dont want to use cc or bcc because then the TO is not personalised when the person recieves the email.
I had a great plugin in outlook on my PC that worked great called Send Personally from Mapilab but it is not compatiable with Mac, I am desperate to find something that works any ideas???

Welcome to Apple Support Communities.
It's probably quite simple, and nothing to do with your Address Book group.
It is a matter of 'junk mail' or 'spam' filtering on the recipient end, I think.
1. Apparently not everyone in your Address Book group (12 of 15 apparently?) has your current email address among their 'permitted email addresses', so, your original email message ends up in their 'junk mail' or 'spam filter' or whatever it is called by their email provider. Some businesses and schools also filter incoming messages for subject, language, content, or by sender's address (one company I dealt with prohibited all incoming email from Hotmail, for example), so it could be filtered at that level. In that case, the recipient might have to specifically ask the IT department to add your email address to a 'permitted' list.
2. When someone else in the group hits 'reply all', THEIR email address IS among the 'permitted email addresses' for everyone else, and they are in effect 'forwarding' your message from their email address, so the filtering affecting your email address does not affect their re-sending of your message.

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

Did you select View->Bcc Address Field from the menu bar?

HOW TO SEND PERSONALIZED EMAILS (WITH SAME MESSAGE) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR NAME BUT NOT WHO ELSE IS GETTING IT

HOW TO SEND PERSONALIZED EMAILS WITH THE SAME MESSAGE, BUT WITH THE INDIVIDUAL RECIPIENT'S NAME... (OR NAME AND THE EMAIL ADDRESS) TO ALL ADDRESSES IN THE ADDRESS BOOK - WITH RECIPIENTS SEEING ONLY THEIR OWN NAME WITHIN THE BODY OF THE MESSAGE TO THEM ?
ALSO, HOW TO ELIMINATE ALL THE OTHER NAMES FROM THE LIST - SO THEY CAN NOT SEE WHO ELSE IS ON THE MAILING LIST, AND WHO ELSE IS GETTING THE SAME MESSAGE?

In the csv file, the column headers must match the the special references in curly brackets.
So you either change the column header in .csv file or the bit in the curly brackets in the Template email.
To change the column header:
In the example shown below, I wanted to use the first two columns
'First Name', 'Last Name' note the exact spelling.
I also wanted the email address which was in a column called 'Primary Email'.
To make it easier for me, I copied the Primary Email column and inserted it into the third column position and then changed the column header name from 'Primary Email' to 'Email'. (This meant I still had the original column header just in case). see image below.
But you could just change the column header name from 'Primary Email' to 'Email' without moving column about - up to you.
At this point check that all the contacts do have a valid email address.
then save the file.
If you do not want to edit the .csv file, then you need to edit the template email.
eg: {{First Name}} {{Last Name}} <{{Email}}>
change to : {{First Name}} {{Last Name}} <{{Primary Email}}>
If still having an issue, please post two images.
One image needs to show the row of column headers used in .csv file.
The other image needs to show the Template email, so I can see how you have used the curly brackets.

How do I send an email with a group address and not show the addresses/names of the recipients?

How do I send an email with a group address and not show the addresses/names of the recipients?

Use BCC. That's blind carbon copy. And copy paste the address into the BCC field. It really depends what e-mail program you use how to enable BCC.

Issue in sending the email with XL attachment in ECC version

Hi,
I have an issue with sending the email with XL attachment. My program is sending a mail to the receiver with XLS as attachment. Recently we have migrated from 4.6B to ECC version. Same code was worked in 4.6B.But it is not working in ECC version.When i try to open the attachment, i get a Dialog Box with the following message
"The file is not in a recognizable format.
1. if you know the file is from another program whih is incompatible with Microsoft excel,click cancel,then open this file in its original application
2.If you suspect the file is damaged, click help for more information about solving theproblem.
3.if you still want to see what text is contained in the file, click OK.Then click the text import wizard. "
when i click OK, the excel sheet is opening with all required data.
Can anyone kindly tell me why this is happening.
I am also attaching part of the coding related to this requirement.
*&      Form BUILD_XLS_DATA_TABLE
      text
--> p1        text
<-- p2        text
FORM build_xls_data_table.
DATA: w_total(13),
w_clabs(13),
w_cinsm(13),
w_ceinm(13),
w_cretm(13),
w_cspem(13),
w_cumlm(13),
w_exp_date(8),
w_v_totalp(13),
w_min_rem(8),
w_ersda(10),
w_hsdat(10),
w_vfdat(10),
w_ship_date(10),
w_plnmg(13),
   w_mhdrz(4).
CLEAR: w_total, w_clabs, w_cinsm, w_ceinm, w_cspem, w_exp_date,
w_v_totalp, w_min_rem, w_ersda, w_hsdat, w_vfdat, w_ship_date,
w_plnmg, w_mhdrz.
w_total = it_batch1-total.
w_clabs = it_batch1-clabs.
w_cinsm = it_batch1-cinsm.
w_ceinm = it_batch1-ceinm.
w_cspem = it_batch1-cspem.
w_cumlm = it_batch1-cumlm.
w_cretm = it_batch1-cretm.
w_exp_date = it_batch1-exp_date.
w_v_totalp = it_batch1-v_totalp.
w_min_rem = it_batch1-min_rem.
w_plnmg = it_batch1-plnmg.
w_mhdrz = it_batch1-mhdrz.
CONCATENATE it_batch1-ersda6(2) it_batch1-ersda4(2)
              it_batch1-ersda+0(4) INTO w_ersda SEPARATED BY '.'.
CONCATENATE it_batch1-hsdat6(2) it_batch1-hsdat4(2)
              it_batch1-hsdat+0(4) INTO w_hsdat SEPARATED BY '.'.
CONCATENATE it_batch1-vfdat6(2) it_batch1-vfdat4(2)
              it_batch1-vfdat+0(4) INTO w_vfdat SEPARATED BY '.'.
CONCATENATE it_batch1-ship_date6(2) it_batch1-ship_date4(2)
              it_batch1-ship_date+0(4) INTO w_ship_date SEPARATED BY '.'
CONCATENATE
it_batch1-werks it_batch1-mtart it_batch1-matnr it_batch1-maktg
it_batch1-prdha it_batch1-prctr it_batch1-ktext it_batch1-dispo
it_batch1-charg it_batch1-lgort it_batch1-herkl w_clabs
w_cinsm w_ceinm w_cretm w_cspem
w_cumlm w_total it_batch1-meins it_batch1-v_spr_unit
w_v_totalp it_batch1-waers w_plnmg it_batch1-meins
w_ersda w_hsdat w_vfdat w_exp_date
   w_ship_date w_mhdrz w_min_rem it_batch1-zlifer
   it_batch1-doknr it_batch1-dokar it_batch1-doktl it_batch1-dokvr
           INTO L_STRING SEPARATED BY CON_TAB.
              INTO l_string SEPARATED BY cl_abap_char_utilities=>horizontal_tab.
WHILE l_string <> space.
    CALL FUNCTION 'TEXT_SPLIT'
      EXPORTING
        length       = 255
        text         = l_string
        as_character = 'X'
      IMPORTING
        line         = it_attach
        rest         = l_string.
    IF l_string = space.
   CONCATENATE IT_ATTACH CON_CRET INTO IT_ATTACH.
      CONCATENATE it_attach cl_abap_char_utilities=>cr_lf INTO it_attach.
      APPEND it_attach.
      CLEAR it_attach.
    ELSE.
      APPEND it_attach.
      CLEAR it_attach.
    ENDIF.
ENDWHILE.
move l_string to it_attach .
CONCATENATE it_attach cl_abap_char_utilities=>cr_lf INTO it_attach.
APPEND it_attach.
CLEAR it_attach.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      text
--> p1        text
<-- p2        text
FORM send_file_as_email_attachment.
DATA:w_length TYPE i.
DATA: w_cnt TYPE i,
          w_sent_all(1) TYPE c,
          w_doc_data LIKE sodocchgi1,
          gd_error    TYPE sy-subrc,
          gd_reciever TYPE sy-subrc,
          t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = text-034 .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
DESCRIBE TABLE it_attach LINES w_cnt.
DESCRIBE TABLE it_message LINES w_cnt.
READ TABLE it_message INDEX w_cnt.
w_length = STRLEN( it_attach ).
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_message ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = text-034.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = it_attach[].
describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
***Start of changes by 501507008 on 29.01.2009
t_packing_list-obj_descr = 'MAIL BODY'.
***End of changes by 501507008 on 29.01.2009
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = 'XLS'.
t_packing_list-obj_descr = text-034.
t_packing_list-obj_name   = 'filename'.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
LOOP AT it_adr6.
    t_receivers-receiver = it_adr6-smtp_addr.
    t_receivers-rec_type = 'U'.
    t_receivers-com_type = 'INT'.
    t_receivers-notif_del = 'X'.
    t_receivers-notif_ndel = 'X'.
    APPEND t_receivers.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
   EXPORTING
     document_data              = w_doc_data
     put_in_outbox              = 'X'
     sender_address             = ' '
     sender_address_type        = ' '
     commit_work                = 'X'
   IMPORTING
     sent_to_all                = w_sent_all
   TABLES
     packing_list               = t_packing_list
     contents_bin               = t_attachment
     contents_txt               = it_message
     receivers                  = t_receivers
   EXCEPTIONS
     too_many_receivers         = 1
     document_not_sent          = 2
     document_type_not_exist    = 3
     operation_no_authorization = 4
     parameter_error            = 5
     x_error                    = 6
     enqueue_error              = 7
     OTHERS                     = 8.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    EXPORTING
      document_data                    = w_doc_data
     put_in_outbox                    = 'X'
commit_work                      = ' '
IMPORTING
sent_to_all                      =
new_object_id                    =
tables
        packing_list               = t_packing_list
        contents_bin               = t_attachment
        contents_txt               = it_message
        receivers                  = t_receivers
contents_hex                     =
object_para                      =
object_parb                      =
   exceptions
     too_many_receivers               = 1
     document_not_sent                = 2
     document_type_not_exist          = 3
     operation_no_authorization       = 4
   parameter_error                  = 5
   x_error                          = 6
   enqueue_error                    = 7
   OTHERS                           = 8.
IF sy-subrc <> 0.
ENDIF.
ENDFORM.                    " SEND_FILE_AS_EMAIL_ATTACHMENT

Hi,
could you tell me which opeion should i select in SCOT under INT node. I have tried with diffrent options. but no luck.
SAPscript/Smart Forms - No Conversion
ABAP List                     - No Conversion
Business Object/Link     - No Conversion
RAW Text                     - No Conversion

When i send an email with greek characters in the body, the recipient receive it in an unreadable form.

When i send an email with greek characters in the body, many recipients (not all) cannot read it.
At the same time when i use the internet mail it can be read successfully by the recipient.
I have already checked the encoding settings in the Fonts in order to be "unicode (UTF-8)".
What else can i check?
Thanks in advance.
e.g:
From: Eleni Kontomari [email address removed by moderator Andrew]
Sent: Thursday, February 27, 2014 12:33 PM
To: "Nikos Totsios (Ηλεκτρονική διεύθυνση)"; "Giannis Diokarantos (Ηλεκτρονική διεύθυνση)"; "Dimitris Papadopoulos (Ηλεκτρονική διεύθυνση)"; Vassilis Gounaris; "Vassos Efthymiadis (Ηλεκτρονική διεύθυνση)"; Νικηφόρος Κεκρίδης; Ιωάννης Αθανασόπουλος; "Alexis Katsivas (Ηλεκτρονική διεύθυνση)"; Μιχάλης Παπαοικονόμου; Fomesa Hellas; "Χρήστος Σπηλιάδης (Ηλεκτρονική διεύθυνση)"; Δημήτρης Μπενάκης; "Ν. Γαλάνης"; [email protected]; "Αποστόλης Σαμούδης (Ηλεκτρονική διεύθυνση)"; "Β. Ντουρτόγλου (Ηλεκτρονική διεύθυνση)"; [email protected]; [email protected]; "Φοίβη Λεγάκι (Ηλεκτρονική διεύθυνση)"; "Παναγιώτης Κουμεντάκος (Ηλεκτρονική διεύθυνση)"; Σπύρος Ζαφείρης; Hans- Joachim Henn; "Κώστας Αλεξανδρόπουλος (Ηλεκτρονική διεύθυνση)"; [email protected]; [email protected]
Subject: ΠΡΟΣΚΛΗΣΗ ΤΑΚΤΙΚΗΣ ΓΕΝΙΚΗΣ ΣΥΝΕΛΕΥΣΗΣ ΕΣΥΦ
... 13 2014.
''Please read [[Forum rules and guidelines]] when posting a question in a public forum''

There are some language add ons that support emails from other languages that you can check out: [https://addons.mozilla.org/en-us/thunderbird/extensions/language-support/?sort=popular]
The recipient, if they also use thunderbird may need to have a language pack to read the email: [https://addons.mozilla.org/en-US/thunderbird/language-tools/]
You may also need to have them check their interpreter to make sure the email is being received in the same format it is being sent.

How to send an email with an attachment to the customers email address.

Hi friends,
How to send an email with an attachment to the customers email address.
the attachment will be in doc format.
Having an Header
the data which i am sending must be in a TABLE format
with 5 columns.
and each column must have a column heading
Please guide me.
Thanks in Advance,
Ganesh.

*& Report ZEMAIL_ATTACH                                               *
*& Example of sending external email via SAPCONNECT                    *
REPORT ZEMAIL_ATTACH                   .
TABLES: ekko.
PARAMETERS: p_email   TYPE somlreci1-receiver .
*Here get the values of mail from the table adn6 for the customer address.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
      wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA:   it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
        t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
        t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
        w_cnt TYPE i,
        w_sent_all(1) TYPE c,
        w_doc_data LIKE sodocchgi1,
        gd_error    TYPE sy-subrc,
        gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
                               tables it_message
                                      it_attach
                                using p_email
                                      'Example .xls documnet attachment'
                                      'DOC'
                                      'filename'
                             changing gd_error
                                      gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
   UP TO 10 ROWS
    FROM ekpo
    INTO TABLE it_ekpo.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
             con_tab TYPE x VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
   con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
   con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
    CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
                wa_charekpo-aedat wa_charekpo-matnr
           INTO it_attach SEPARATED BY con_tab.
    CONCATENATE con_cret it_attach INTO it_attach.
    APPEND it_attach.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM send_file_as_email_attachment tables pit_message
                                          pit_attach
                                    using p_email
                                          p_mtitle
                                          p_format
                                          p_filename
                                          p_attdescription
                                          p_sender_address
                                          p_sender_addres_type
                                 changing p_error
                                          p_reciever.
DATA: ld_error    TYPE sy-subrc,
        ld_reciever TYPE sy-subrc,
        ld_mtitle LIKE sodocchgi1-obj_descr,
        ld_email LIKE somlreci1-receiver,
        ld_format TYPE so_obj_tp ,
        ld_attdescription TYPE so_obj_nam ,
        ld_attfilename TYPE so_obj_des ,
        ld_sender_address LIKE soextreci1-receiver,
        ld_sender_address_type LIKE soextreci1-adr_typ,
        ld_receiver LIKE sy-subrc.
ld_email   = p_email.
ld_mtitle = p_mtitle.
ld_format              = p_format.
ld_attdescription      = p_attdescription.
ld_attfilename         = p_filename.
ld_sender_address      = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
     ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name   = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num   = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type   = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name   = ld_attfilename.
t_packing_list-doc_size   = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = w_doc_data
            put_in_outbox              = 'X'
            sender_address             = ld_sender_address
            sender_address_type        = ld_sender_address_type
            commit_work                = 'X'
       IMPORTING
            sent_to_all                = w_sent_all
       TABLES
            packing_list               = t_packing_list
            contents_bin               = t_attachment
            contents_txt               = it_message
            receivers                  = t_receivers
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
    ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                WITH output = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.                    " POPULATE_EMAIL_MESSAGE_BODY
regards,
venkat.

How to send an Email with content at the end of a Quiz?

Hello,
i have three Questions about the navigation function "sending an Email" at the end of an Test or Quiz, and i haven´t found any answers in the forum yet.
An Information at the beginning:
I want to use the Test without any other System, for example Moodle. It will be directly reachable with a link on a homepage.
1) Is it possible, to send an Email with answers of the User as the content in the email, and if it´s possible, how?
2) If it´s not possible, could i precast a Text in the email? Until now, there is only an empty Outlook-Window with the Emailadress.
3) Is it possible, to send an Email without Outlook, so a User can use it only web-based, for example with gmx, webmail etc...
Thank you for helping me
Zholmar
(German)
Hallo,
ich habe drei Fragen zum Versand im Rahmen der Navigationsfunktion von "Email versenden", dies soll am Ende von Test bzw. Quizanwendungen geschehen und habe im Forum leider keine entsprechende Antwort bisher gefunden.
Zur Information:
Der Test soll nicht in ein anderes System (z.B. Moodle) eingebettet werden, sondern lediglich per Link auf einer Homepage erreichbar sein.
1) Ich würde gerne am Ende meines Tests eine Email versenden lassen, welche die Antworten des vorangegangenen Tests enthält, ist das möglich und wenn ja wie?
2) Falls das nicht möglich ist, besteht die Möglichkeit, einen vorgefertigten Text + Betreff in der Email zu generieren? Derzeit öffnet sich lediglich ein Outlook Fenster bei erreichen der Folie, in welcher lediglich die angegebene Emailadresse eingetragen ist. In dieser Email soll wenn möglichst bereits ein Text integriert sein, so dass der Teilnehmer lediglich noch Angaben ergänzen muss.
3) Ist der Email Versand auch ohne Outlook möglich? Kann die Funktion also auch rein Webbasiert erfolgen?
Vielen Dank für die Hilfe
Zholmar

Sooo, which method are you wanting to use?
Earlier I outlined the steps for the close project at end.
If you are wanting to use the JavaScript solution, you insert a button. Then in the action, you tell the button to execute JavaScript. Then you click the Script Window button and enter the window.close(); code.
Cheers... Rick

Abap cod e required for send an email with specific template

hi guru's
i want to send an email with specific template ,which contain some email links in the body of the email,and some of the font will be in different colour
i want load the template it in to abap program as it is.is this possible. please let me know.
where can i maintain the template,

hello
check this may help u
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT 'xyzlive.com'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
*Retrieve sample data from table ekpo
PERFORM data_retrieval.
*Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
*Populate message body text
perform populate_email_message_body.
*Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
*Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment] = pit_attach[.
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform. " POPULATE_EMAIL_MESSAGE_BODY
Thank u,
santhosh

CRM ONLINE 2013: On Approval Of Quotation, Run Report, Generate PDF and Send an Email With PDF as attachment

Hi,
I am using CRM ONLINE 2013.
How to automate below process?
1. On Approval Of Quotation, Run Report.
2. Generate PDF.
3. Send an Email With PDF as attachment.
As i have gone through many forums for this topic, but creating a plugin code for generating Report PDF is not possible in CRM ONLINE.
So, What is the alternate way to do this..?
Thanks.

This is my entire code mentioned below:-
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
    <title></title>
    <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.4.1/jquery.min.js"></script>
    <script type="text/javascript">
        if (typeof (SDK) == "undefined")
        { SDK = { __namespace: true }; }
        SDK.JScriptRESTDataOperations = {
            _context: function () {
                if (typeof GetGlobalContext != "undefined")
                { return GetGlobalContext(); }
                else {
                    if (typeof Xrm != "undefined") {
                        return Xrm.Page.context;
                    else { return new Error("Context is not available."); }
            _getServerUrl: function () {
                var serverUrl = this._context().getServerUrl()
                if (serverUrl.match(/\/$/)) {
                    serverUrl = serverUrl.substring(0, serverUrl.length - 1);
                return serverUrl;
            _ODataPath: function () {
                return this._getServerUrl() + "/XRMServices/2011/OrganizationData.svc/";
            _errorHandler: function (req) {
                return new Error("Error : " +
req.status + ": " +
req.statusText + ": " +
JSON.parse(req.responseText).error.message.value);
            _dateReviver: function (key, value) {
                var a;
                if (typeof value === 'string') {
                    a = /Date$([-+]?\d+)$/.exec(value);
                    if (a) {
                        return new Date(parseInt(value.replace("/Date(", "").replace(")/", ""), 10));
                return value;
            Create: function (object, type, successCallback, errorCallback) {
                var req = new XMLHttpRequest();
                req.open("POST", this._ODataPath() + type + "Set", true);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                req.onreadystatechange = function () {
                    if (this.readyState == 4 /* complete */) {
                        if (this.status == 201) {
                            successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
                        else {
                            errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                req.send(JSON.stringify(object));
            Retrieve: function (id, type, successCallback, errorCallback) {
                var req = new XMLHttpRequest();
                req.open("GET", this._ODataPath() + type + "Set(guid'" + id + "')", true);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                req.onreadystatechange = function () {
                    if (this.readyState == 4 /* complete */) {
                        if (this.status == 200) {
                            successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d);
                        else {
                            errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                req.send();
            Update: function (id, object, type, successCallback, errorCallback) {
                var req = new XMLHttpRequest();
                req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                req.setRequestHeader("X-HTTP-Method", "MERGE");
                req.onreadystatechange = function () {
                    if (this.readyState == 4 /* complete */) {
                        if (this.status == 204 || this.status == 1223) {
                            successCallback();
                        else {
                            errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                req.send(JSON.stringify(object));
            Delete: function (id, type, successCallback, errorCallback) {
                var req = new XMLHttpRequest();
                req.open("POST", this._ODataPath() + type + "Set(guid'" + id + "')", true);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                req.setRequestHeader("X-HTTP-Method", "DELETE");
                req.onreadystatechange = function () {
                    if (this.readyState == 4 /* complete */) {
                        if (this.status == 204 || this.status == 1223) {
                            successCallback();
                        else {
                            errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                req.send();
            RetrieveMultiple: function (type, filter, successCallback, errorCallback) {
                if (filter != null) {
                    filter = "?" + filter;
                else { filter = ""; }
                var req = new XMLHttpRequest();
                req.open("GET", this._ODataPath() + type + "Set" + filter, true);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json; charset=utf-8");
                req.onreadystatechange = function () {
                    if (this.readyState == 4 /* complete */) {
                        if (this.status == 200) {
                            successCallback(JSON.parse(this.responseText, SDK.JScriptRESTDataOperations._dateReviver).d.results);
                        else {
                            errorCallback(SDK.JScriptRESTDataOperations._errorHandler(this));
                req.send();
            __namespace: true
    </script>
    <script type="text/javascript">
        //Create Email and link it with Order as Regarding field
        var Xrm;
        var email = new Object();
        var ownerID = "";
        var CustomerId = "";
        if (window.opener) { Xrm = window.opener.Xrm; }
        else if (window.parent) { Xrm = window.parent.Xrm; }
        //Get ownerid who send email of quotation to customer
        function GetOwnerID() {
            var owner = Xrm.Page.getAttribute("ownerid").getValue();
            ownerID = owner[0].id;
            var ownerName = owner[0].name;
            var entityType = owner[0].entityType;
            GetToEmailGUID();
        //Get customerid who receive email of quotation from owner
        function GetToEmailGUID() {
            var Customer = Xrm.Page.getAttribute('customerid').getValue();
            CustomerId = Customer[0].id;
            var CustomerName = Customer[0].name;
            var entityType = Customer[0].entityType;
            //if CustomerId is type of "Account" then get Primary Contact id of that account
            if (entityType == "account") {
                var contact = Xrm.Page.getAttribute("customerid").getValue();
                if (contact === null) return;
                var serverUrl = Xrm.Page.context.getClientUrl();
                var oDataSelect = serverUrl + "/XRMServices/2011/OrganizationData.svc/AccountSet(guid'" + contact[0].id + "')?$select=PrimaryContactId";
                var req = new XMLHttpRequest();
                req.open("GET", oDataSelect, false);
                req.setRequestHeader("Accept", "application/json");
                req.setRequestHeader("Content-Type", "application/json;charset=utf-8");
                req.onreadystatechange = function () {
                    if (req.readyState === 4) {
                        if (req.status === 200) {
                            var retrieved = JSON.parse(req.responseText).d;
                            CustomerId = retrieved.PrimaryContactId.Id;
                        else {
                            alert(this.statusText);
                req.send();
        function CreateEmail() {
            GetOwnerID();
            email.Subject = "Email with Report Attachment";
            //Set The current order as the Regarding object
            email.RegardingObjectId = {
                Id: Xrm.Page.data.entity.getId(),    //Get the current entity Id , here OrderId
                LogicalName: Xrm.Page.data.entity.getEntityName()//Get the current entity name, here it will be “salesOrder”
            //Create Email Activity
            SDK.JScriptRESTDataOperations.Create(email, "Email", EmailCallBack, function (error) { alert(error.message); });
        // Email Call Back function
        function EmailCallBack(result) {
            email = result; // Set the email to result to use it later in email attachment for retrieving activity Id
            var activityPartyFrom = new Object();
            // Set the From party of the ActivityParty to relate an entity with Email From field
            activityPartyFrom.PartyId = {
                Id: CustomerId, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
                LogicalName: "contact"
            // Set the "activity" of the ActivityParty
            activityPartyFrom.ActivityId = {
                Id: result.ActivityId,
                LogicalName: "email"
            // Now set the participation type that describes the role of the party on the activity).
            activityPartyFrom.ParticipationTypeMask = { Value: 2 }; // 2 means ToRecipients
            // Create the from ActivityParty for the email
            SDK.JScriptRESTDataOperations.Create(activityPartyFrom, "ActivityParty", ActivityPartyFromCallBack, function (error) { alert(error.message); });
            var activityPartyTo = new Object();
            // Set the From party of the ActivityParty to relate an entity with Email From field
            activityPartyTo.PartyId = {
                Id: ownerID, //"79EBDD26-FDBE-E311-8986-D89D6765B238", // id of entity you want to associate this activity with.
                LogicalName: "systemuser"
            // Set the "activity" of the ActivityParty
            activityPartyTo.ActivityId = {
                Id: result.ActivityId,
                LogicalName: "email"
            // Now set the participation type that describes the role of the party on the activity).
            activityPartyTo.ParticipationTypeMask = { Value: 1 }; // 1 means Sender
            // Create the from ActivityParty
            SDK.JScriptRESTDataOperations.Create(activityPartyTo, "ActivityParty", ActivityPartyToCallBack, function (error) { alert(error.message); });
        //ActivityParty From Callback
        function ActivityPartyFromCallBack(result) {
        //ActivityParty To Callback
        function ActivityPartyToCallBack(result) {
            GetReportId('ABM_Infotech_SalesQuote');
        //Create attachment for the created email
        function CreateEmailAttachment() {
            //get reporting session and use the params to convert a report in PDF
            var params = getReportingSession();
            //Email attachment parameters
            var activitymimeattachment = Object();
            activitymimeattachment.ObjectId = Object();
            activitymimeattachment.ObjectId.LogicalName = "email";
            activitymimeattachment.ObjectId.Id = email.ActivityId;
            activitymimeattachment.ObjectTypeCode = "email",
                activitymimeattachment.Subject = "File Attachment";
            activitymimeattachment.Body = encodePdf(params);
            activitymimeattachment.FileName = "Report1.pdf";
            activitymimeattachment.MimeType = "application/pdf";
            //Attachment call
            SDK.JScriptRESTDataOperations.Create(activitymimeattachment, "ActivityMimeAttachment", ActivityMimeAttachmentCallBack, function (error) { alert(error.message); });
        //ActivityMimeAttachment CallBack function
        function ActivityMimeAttachmentCallBack(result) {
            var features = "location=no,menubar=no,status=no,toolbar=no,resizable=yes";
            var width = "800px";
            var height = "600px";
            window.open(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", features);
            // To open window which works in outlook and IE both
            //openStdWin(Xrm.Page.context.getServerUrl() + "main.aspx?etc=" + 4202 + "&pagetype=entityrecord&id=" + email.ActivityId, "_blank", width,
height, features);
        //This method will get the reportId based on a report name that will be used in            getReportingSession() function
        function GetReportId(reportName) {
            var oDataSetName = "ReportSet";
            var columns = "ReportId";
            var filter = "Name eq '" + reportName + "'";
            retrieveMultiple(oDataSetName, columns, filter, onSuccess);
        function retrieveMultiple(odataSetName, select, filter, successCallback) {
            var serverUrl = Xrm.Page.context.getServerUrl();
            var ODATA_ENDPOINT = "/XRMServices/2011/OrganizationData.svc";
            var odataUri = serverUrl + ODATA_ENDPOINT + "/" + odataSetName + "?";
            if (select) {
                odataUri += "$select=" + select + "&";
            if (filter) {
                odataUri += "$filter=" + filter;
            $.ajax({
                type: "GET",
                contentType: "application/json; charset=utf-8",
                datatype: "json",
                url: odataUri,
                beforeSend: function (XMLHttpRequest) {
                    XMLHttpRequest.setRequestHeader("Accept", "application/json");
                success: function (data) {
                    if (successCallback) {
                        if (data && data.d && data.d.results) {
                            successCallback(data.d.results);
                        else if (data && data.d) {
                            successCallback(data.d);
                        else {
                            successCallback(data);
                error: function (XmlHttpRequest, errorThrown) {
                    if (XmlHttpRequest && XmlHttpRequest.responseText) {
                        alert("Error while retrieval ; Error – " + XmlHttpRequest.responseText);
        function onSuccess(data) {
            reportId = data[0].ReportId.replace('{', ").replace('}', ");
            CreateEmailAttachment(); // Create Email Attachment
        //Gets the report contents
        function getReportingSession() {
            var pth = Xrm.Page.context.getServerUrl() + "/CRMReports/rsviewer/reportviewer.aspx";
            var retrieveEntityReq = new XMLHttpRequest();
            var Id = Xrm.Page.data.entity.getId();
            var quotationGUID = Id.replace('{', ""); //set this to selected quotation GUID
            quotationGUID = quotationGUID.replace('}', "");
            var reportName = "ABM_Infotech_SalesQuote"; //set this to the report you are trying to download
            var reportID = "751089AA-74B8-E211-B52F-D8D3855B253B"; //set this to the guid of the report you are trying to download
            var rptPathString = ""; //set this to the CRMF_Filtered parameter
            var strParameterXML = "<fetch version='1.0' output-format='xml-platform' mapping='logical' distinct='false'><entity name='quote'><all-attributes /><filter type='and'><condition
attribute='quoteid' operator='eq' uitype='quote' value='" + quotationGUID + "' /> </filter></entity></fetch>";
            retrieveEntityReq.open("POST", pth, false);
            retrieveEntityReq.setRequestHeader("Accept", "*/*");
            retrieveEntityReq.setRequestHeader("Content-Type", "application/x-www-form-urlencoded");
            rptPathString = "id=%7B" + reportID + "%7D&uniquename=" + Xrm.Page.context.getOrgUniqueName() + "&iscustomreport=true&reportnameonsrs=&reportName="
+
                            reportName + "&isScheduledReport=false&p:ABMFilteredQuote=" + strParameterXML;
            //remove the part starting from &p:salesorderid if your report has no parameters
            retrieveEntityReq.send(rptPathString);
            var x = retrieveEntityReq.responseText.indexOf("ReportSession=");
            var ret = new Array();
            ret[0] = retrieveEntityReq.responseText.substr(x + 14, retrieveEntityReq.responseText.indexOf("&", x) - x - 14); //the session id
            x = retrieveEntityReq.responseText.indexOf("ControlID=");
            ret[1] = retrieveEntityReq.responseText.substr(x + 10, retrieveEntityReq.responseText.indexOf("&", x) - x - 10); //the control id
            return ret;
        var bdy = new Array();
        var bdyLen = 0;
        function concat2Bdy(x) {
            bdy[bdyLen] = x;
            bdyLen++;
        function encodePdf(params) {
            bdy = new Array();
            bdyLen = 0;
            var retrieveEntityReq = new XMLHttpRequest();
            var pth = Xrm.Page.context.getServerUrl() + "/Reserved.ReportViewerWebControl.axd?ReportSession=" + params[0] +
            "&Culture=1033&CultureOverrides=True&UICulture=1033&UICultureOverrides=True&ReportStack=1&ControlID=" + params[1] +
            "&OpType=Export&FileName=Public&ContentDisposition=OnlyHtmlInline&Format=PDF";
            retrieveEntityReq.open("GET", pth, false);
            retrieveEntityReq.setRequestHeader("Accept", "*/*");
            retrieveEntityReq.send();
            BinaryToArray(retrieveEntityReq.responseBody);
            return encode64(bdy);
        var StringMaker = function () {
            this.parts = [];
            this.length = 0;
            this.append = function (s) {
                this.parts.push(s);
                this.length += s.length;
            this.prepend = function (s) {
                this.parts.unshift(s);
                this.length += s.length;
            this.toString = function () {
                return this.parts.join('');
        var keyStr = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/=";
        function encode64(input) {
            var output = new StringMaker();
            var chr1, chr2, chr3;
            var enc1, enc2, enc3, enc4;
            var i = 0;
            while (i < input.length) {
                chr1 = input[i++];
                chr2 = input[i++];
                chr3 = input[i++];
                enc1 = chr1 >> 2;
                enc2 = ((chr1 & 3) << 4) | (chr2 >> 4);
                enc3 = ((chr2 & 15) << 2) | (chr3 >> 6);
                enc4 = chr3 & 63;
                if (isNaN(chr2)) {
                    enc3 = enc4 = 64;
                } else if (isNaN(chr3)) {
                    enc4 = 64;
                output.append(keyStr.charAt(enc1) + keyStr.charAt(enc2) + keyStr.charAt(enc3) + keyStr.charAt(enc4));
            return output.toString();
    </script>
    <script type="text/vbscript">
    Function BinaryToArray(Binary)
           Dim i
           ReDim byteArray(LenB(Binary))
           For i = 1 To LenB(Binary)
                 byteArray(i-1) = AscB(MidB(Binary, i, 1))
                 concat2Bdy(AscB(MidB(Binary, i, 1)))
         Next
          BinaryToArray = byteArray
   End Function
    </script>
</head>
<body>
    <input type="button" onclick="CreateEmail();" value="Attach Report" />
</body>
</html>

Problem by Sending an Email with attached Adobe Interactive Form (Code)

Thanks. I have written Programm, but it does not work as i want it to do. I will send an Email with attached Adobe Interactive Firm to [email protected]. I tried it with "*lo_recipient = cl_sapuser_bcs=>create( sy-uname )" at the marked(bold, fat) position. It worked but the Email was send to my SAP-Account, but i want to send to [email protected], so I tried this (see at code in bold, fat):
lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
But it doens`t send the email.
Can anybody help me please???
Kevin
Here my Code:
Report FP_EXAMPLE_01
Printing of documents using PDF based forms
REPORT z_example_02.
Data declaration
DATA: carr_id TYPE sbook-carrid,
customer TYPE scustom,
bookings TYPE ty_bookings,
connections TYPE ty_connections,
fm_name TYPE rs38l_fnam,
fp_docparams TYPE sfpdocparams,
fp_outputparams TYPE sfpoutputparams,
error_string TYPE string,
l_booking TYPE sbook,
t_sums TYPE TABLE OF sbook,
l_sums LIKE LINE OF t_sums,
fp_formoutput TYPE fpformoutput.
PARAMETER: p_custid TYPE scustom-id DEFAULT 38.
SELECT-OPTIONS: s_carrid FOR carr_id DEFAULT 'AA' TO 'ZZ'.
PARAMETER: p_form TYPE tdsfname DEFAULT 'FP_EXAMPLE_01'.
PARAMETER: language TYPE sfpdocparams-langu DEFAULT 'E'.
PARAMETER: country TYPE sfpdocparams-country DEFAULT 'US'.
Get data from the following tables: scustom(Flight customer)
sbook (Single flight reservation)
spfli (Flight plan)
SELECT SINGLE * FROM scustom INTO customer WHERE id = p_custid.
CHECK sy-subrc = 0.
SELECT * FROM sbook INTO TABLE bookings
WHERE customid = p_custid
AND carrid IN s_carrid
ORDER BY PRIMARY KEY.
SELECT * FROM spfli INTO TABLE connections
FOR ALL ENTRIES IN bookings
WHERE carrid = bookings-carrid
AND connid = bookings-connid
ORDER BY PRIMARY KEY.
Print data:
First get name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = p_form
IMPORTING
e_funcname = fm_name.
IF sy-subrc <> 0.
MESSAGE e001(fp_example).
ENDIF.
Set output parameters and open spool job
fp_outputparams-nodialog = 'X'. " suppress printer dialog popup
fp_outputparams-getpdf = 'X'. " launch print preview
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
Set form language and country (->form locale)
fp_docparams-langu = language.
fp_docparams-country = country.
*fp_docparams-fillable = 'X'.
*fp_docparams-langu = 'E'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
*fp_docparams-country = 'GB'. "wird jetzt automatisch gesetzt, bzw. kann dynamisch verändert werden
currency key dependant summing
LOOP AT bookings INTO l_booking.
l_sums-forcuram = l_booking-forcuram.
l_sums-forcurkey = l_booking-forcurkey.
COLLECT l_sums INTO t_sums.
ENDLOOP.
Now call the generated function module
CALL FUNCTION fm_name
EXPORTING
/1bcdwb/docparams = fp_docparams
customer = customer
bookings = bookings
connections = connections
t_sums = t_sums
IMPORTING
/1bcdwb/formoutput = fp_formoutput
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
CALL FUNCTION 'FP_GET_LAST_ADS_ERRSTR'
IMPORTING
e_adserrstr = error_string.
IF NOT error_string IS INITIAL.
we received a detailed error description
WRITE:/ error_string.
EXIT.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
EXCEPTIONS
usage_error = 1
system_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*********************Send the form*******************
*********************to the Customer*****************
*********************via Email***********************
*IF i_down = abap_true.
DATA: filename TYPE string,
path TYPE string,
fullpath TYPE string,
default_extension TYPE string VALUE 'PDF'.
Data:
lt_att_content_hex TYPE solix_tab.
*DATA: data_tab TYPE TABLE OF x255.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = fp_formoutput-pdf
TABLES
binary_tab = lt_att_content_hex.
CLASS cl_bcs DEFINITION LOAD.
DATA:
lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
DATA:
lt_message_body TYPE bcsy_text VALUE IS INITIAL.
DATA: lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear Vendor,' TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Please fill the attached form and send it back to us.'
TO lt_message_body.
APPEND ' ' TO lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Vendor Payment Form' ).
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
lo_document->add_attachment(
EXPORTING
i_attachment_type = 'PDF'
i_attachment_subject = 'Vendor Payment Form'
i_att_content_hex = lt_att_content_hex ).
CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
lo_send_request->set_document( lo_document ).
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
lo_send TYPE adr6-smtp_addr VALUE '[email protected]'. "Absender SENDER
lo_sender = cl_cam_address_bcs=>create_internet_address( lo_send ).
Set sender
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
Create recipient
DATA:
lo_recipient type ref to if_recipient_bcs value is initial.
Data:
lo_rec TYPE adr6-smtp_addr VALUE '[email protected]'. " Empfänger Receiver
lo_recipient = cl_cam_address_bcs=>create_internet_address( lo_rec ).
*lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
*lo_send_request->add_recipient(
*EXPORTING
*i_recipient = lo_recipient
*i_express = 'X' ).
Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
MESSAGE 'The payment form has been emailed to the Vendor' TYPE 'I'.

Hi Kevin,
Please try this code to send your mail, i wrote it and works well in many system.
Take care if in your profile you got an e-mail adress define .
Take care also of trnasaction SCOT customizing, are you able to send mail to e-mail adress ?
Let me know if it's works.
Best regards.
<i>**----
CLASS-DEFINITIONS
DATA: send_request       TYPE REF TO cl_bcs.
DATA: document           TYPE REF TO cl_document_bcs.
DATA: sender             TYPE REF TO cl_sapuser_bcs.
DATA: recipient          TYPE REF TO if_recipient_bcs.
INTERNAL TABLES
DATA: l_mailtext TYPE soli_tab.
DATA: iaddsmtp   TYPE TABLE OF bapiadsmtp.
DATA: ireturn    TYPE TABLE OF bapiret2.
VARIABLES
DATA: mail_line LIKE LINE OF l_mailtext.
DATA: bapiadsmtp         TYPE bapiadsmtp.
DATA: subject    TYPE so_obj_des.
DATA : att_subject TYPE so_obj_des.
DATA : w_except TYPE REF TO cx_root .
CONSTANTS : c_defmail TYPE ad_smtpadr VALUE
                 '[email protected]' .
FIELD-SYMBOLS : <smtp> TYPE bapiadsmtp.
*Convert the pdf given by function module into Binary .
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
    buffer     = output-pdf "PDF file from function module
TABLES
    binary_tab = hexa.
*Set subject of the mail
subject = 'Exemple de PDF interactif'.
Set text of the mail
mail_line = 'Merci de remplir le formulaire et nous le retourner'.
APPEND mail_line TO l_mailtext .
Set the name of the attached document
att_subject = 'Template du PDF'.
TRY.
Create persistent send request
    send_request = cl_bcs=>create_persistent( ).
Get sender object
    sender = cl_sapuser_bcs=>create( sy-uname ).
Add sender
    CALL METHOD send_request->set_sender
      EXPORTING
        i_sender = sender.
Read the E-Mail address for the user
    CALL FUNCTION 'BAPI_USER_GET_DETAIL'
      EXPORTING
        username = sy-uname
      TABLES
        return   = ireturn
        addsmtp = iaddsmtp.
    LOOP AT iaddsmtp ASSIGNING <smtp> WHERE std_no = 'X'.
      CLEAR bapiadsmtp.
      MOVE <smtp> TO bapiadsmtp.
    ENDLOOP.
    CASE bapiadsmtp-e_mail.
      WHEN space.
No adress main for user, so send it to the default mail adress
        recipient =
     cl_cam_address_bcs=>create_internet_address( c_defmail ).
      WHEN OTHERS.
        recipient =
     cl_cam_address_bcs=>create_internet_address( bapiadsmtp-e_mail ).
    ENDCASE.
Add recipient with its respective attributes to send request
    CALL METHOD send_request->add_recipient
      EXPORTING
        i_recipient = recipient
        i_express    = 'X'
        i_copy       = space
        i_blind_copy = space
        i_no_forward = space.
Set that you don't need a Return Status E-mail
    CALL METHOD send_request->set_status_attributes
      EXPORTING
        i_requested_status = 'E'
        i_status_mail      = 'E'.
set send immediately flag
    send_request->set_send_immediately( 'X' ).
*Build Document
    document = cl_document_bcs=>create_document(
                        i_type    = 'RAW'
                        i_text    = l_mailtext
                        i_subject = subject ).
    add attachment to document
    CALL METHOD document->add_attachment
      EXPORTING
        i_attachment_type    = 'PDF'
        i_attachment_subject = att_subject
        i_att_content_hex    = hexa.
Add document to send request
    CALL METHOD send_request->set_document( document ).
Send document
    CALL METHOD send_request->send( ).
    COMMIT WORK.
CATCH cx_send_req_bcs INTO w_except.
CATCH cx_address_bcs INTO w_except.
CATCH cx_document_bcs INTO w_except.
ENDTRY.</i>

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tell me that the file is being used even when it is not. How can I fix this issue?

Why can I not attach a document to an email? Every time I want to send an email with a document attached to it, an error notice pops out. It tells me that the file is being used even when iall other programs are closed. How can I fix this issue?

Thanks Jeff, I was not aware that a template could be multi-page. (All the existing templates were 1 page)
But it worked, saving me some steps. When I was finished I renamed the document, and locked it.
Then tried to save it but could not because it was locked. I closed it, went to my Spread Sheet Folder ,
to find it, it was not there. The Finder could not find it either.
So I start over again.
I opened up Numbers and it showed my personal Numbers template folder, it contained both my new
original 4 page template and the vanished saved document!
I tried to delete the template containing these document data and could not - I had to go to the Library/Application Support/Numbers to physically remove it from this folder. Then I started over again. I Finally found out how to make it work: I can now "save as", and then lock, and it will go to place where I want it to be saved and locked.
The secret is: Click on the document title in the menu bar, and it opens up "Save as...", which works the same as in OS 10.4.11, and you can pick the place you want for saving. Once done that, you can then lock the document in the same pull down menu, and then close it.
I also found later that I can delete a template from its folder, by letting Numbers open the templates,
clicking on the one I want to remove, then go to the "Numbers Menu/File/Move to...", select "Desktop"
and from there the selected template can then be thrown into the Trash from there.
It appears now that the real fault of the Numbers software is that the "Save as" command is not available in the "Edit" or "File" pull-down menus, but hidden behind the title of the document.

On my imac, All of a sudden I am unable to send original emails with any attachments. I can attach the file but when I try to send it, it won't send. Also, if I am emailing back and forth as it gets longer, it no longer transmits

On my imax, all of a sudden I am unable to send original emails with attachments of any size. I can attached the file but when I try to transmit, it will not go.
Also, if I am emailing back and forth, once there gets to be several threads, it will no longer transmit. Any suggestions. I am using gmail in the apple mail system

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer. Then I would launch Logic and see if the problem has been corrected. It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

Mars sending an email with an empty recipients.

Similar Messages

Maybe you are looking for