MAS Generator Service Initialization Failed
Hi,
We ar eon MSV 5.0 SP11. In MAS we are able to login to the MAS. The MAS creadentials are accepted, we get the screen where we can select the change list. When we click OK here, we get an error saying "Generator Service Initialization Failed".
This used to work earlier. Only change which is done is that the User with which we used to connect to the Windows machine (not MAS user)initially was a local user with admin rights. Now we are using the user with same username but the user is created on our Active directory server.
Can anyone guide us please?
Thanks,
Yatin
MAS needs Administrator previlage to run. (Administrator previlage of the system in which it is installed not that of the domain)
Add / Assign local Administrator privilage to the user (the one that u have created in the Active Directory).
Right click on My Computer ->Manage
Go to Local Users and Groups - >Group
Right click on Administrators -> Add to Group
Find and Add the user (the one that u have created in the Active Directory)
Click OK and close the window..
Make sure the SQL Server that ur MAS is connecting to is up and running....
Hope this will solve your problem...
Thanks
Anand
Similar Messages
-
Synchronization Failed. Error is Firefox service initialization failed.
Synchronization Failed. Error is Firefox service initialization failed.
Synchronization Failed. Error is Firefox service initialization failed.<br />
I have been having this issue for quite some time with Firefox. I am using the Nightly build (23.0a1) and have been using for more than 2 years. Synchronization was working fine till a few weeks ago. Synchronization of XMarks on Chrome Dev works fine and no problem. It's only with Firefox. Things I've tried but no success:
1) I deleted my profile off of xmarks and created a new one and tried syncing again. No success.<br />
2) deleted firefox, deleted the profile folder under AppData. Reinstalled everything fresh, and still no success.<br />
My log file shows the following... Not sure what to check. Anyone help me? Thanks!
<pre><nowiki>[2013-04-06 08:54:19] Failed to initialize ["lmsvc", "@mozilla.org/browser/livemark-service;2", (void 0)]: error is ({})
[2013-04-06 08:54:19] Host browser is FF14+, use private DB
[2013-04-06 08:54:19] Created nid_map table
[2013-04-06 08:55:12] Starting modal auth(true, undefined)
[2013-04-06 08:55:19] Could not load login iframe: {}
[2013-04-06 08:55:31] Finished modal auth with result 0
[2013-04-06 08:55:31] Entered OnTransitionPageShow()
[2013-04-06 08:55:31] ------ Xmarks/4.1.3 (/Places) starting status with sync.xmarks.com ------
[2013-04-06 08:55:31] Failed to initialize ["lmsvc", "@mozilla.org/browser/livemark-service;2", (void 0)]: error is ({})
[2013-04-06 08:55:31] Host browser is FF14+, use private DB
[2013-04-06 08:55:31] Entered Status...
[2013-04-06 08:55:31] >>> POST http://sync.xmarks.com/sync/bookmarks...
[2013-04-06 08:55:31] >>> Body is: {}
[2013-04-06 08:55:32] >>> Callback ({username:"dmadapps", status:0, toprev:1, isreset:true})
[2013-04-06 08:55:32] Success: Account verified.
[2013-04-06 08:55:32] gCanSyncPasswords is true
[2013-04-06 08:55:32] ------ Xmarks/4.1.3 (/Places) starting getProfileNames with login.xmarks.com ------
[2013-04-06 08:55:32] >>> POST http://login.xmarks.com/user/profiles...
[2013-04-06 08:55:32] >>> Body is: {"log":{"mid":"hf6uh7gn","serp":0,"ssEnabled":false,"sbsEnabled":true}}
[2013-04-06 08:55:32] >>> Callback ({status:0, profiles:{}})
[2013-04-06 08:55:32] Success: Operation successful
[2013-04-06 08:55:32] Calling wizard.advance()
[2013-04-06 08:55:40] ------ Xmarks/4.1.3 (/Places) starting initial sync with sync.xmarks.com ------
[2013-04-06 08:55:40] Failed to initialize ["lmsvc", "@mozilla.org/browser/livemark-service;2", (void 0)]: error is ({})
[2013-04-06 08:55:40] Host browser is FF14+, use private DB
[2013-04-06 08:55:40] Entered Status...
[2013-04-06 08:55:40] >>> POST http://sync.xmarks.com/sync/bookmarks...
[2013-04-06 08:55:40] >>> Body is: {}
[2013-04-06 08:55:41] >>> Callback ({username:"dmadapps", status:0, toprev:1, isreset:true})
[2013-04-06 08:55:41] Returned error: Firefox service initialization failed(6)
[2013-04-06 08:55:41] Will retry at Sat Apr 06 2013 09:10:44 GMT-0500 (Central Standard Time)</nowiki></pre>Re Patrick's suggestion above, I was able to get Xmarks working again on both my Win 7 laptop and desktop today by uninstalling my Aurora browser completely and then installing the regular release version of Firefox, 20.0.1.
When I uninstalled Aurora, it asked me if I wanted to keep my customizations and personal data, and even though it meant a bit more restoration work later, I decided to try erasing all my Aurora settings and data and starting fresh. (But before doing so, I backed up all my bookmarks by exporting to an html file and my add-on settings via Firefox Sync.
After that, I installed and started with a clean slate version of regular Firefox, and proceeded to then reinstall my various add-ons and import my saved bookmarks from the html file. As soon as I re-installed Xmarks and re-logged into my Xmarks account, the automatic syncing process went fine and no more error messages or failures.
I had been using Aurora for months prior with Xmarks and never had any syncing problem until the first week of April. And at that point, the syncing function broke on both my laptop and desktop, which were both running the daily updated versions of Aurora. So I'm believing that something was changed in Aurora that caused this problem. -
NOT POSSIBLE TO START ESSBASE WHEN SSO INITIALIZATION FAILS
Version is 11.1.1.3. My Essbase is not starting. Issues from the logs and what I have attempted are as follows. I have highlighted the relevant areas in bold.
When Starting Essbase from products/Essbase/bin/start.bat:
C:\Hyperion\products\Essbase\bin>start.bat
C:\Hyperion\products\Essbase\bin>REM eis
C:\Hyperion\products\Essbase\bin>net start "Hyperion Integration Services"
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Hyperion\products\Essbase\bin>REM APS
C:\Hyperion\products\Essbase\bin>call C:\Hyperion\products\Essbase\aps\bin\start.bat
C:\Hyperion\products\Essbase\bin>REM aps
C:\Hyperion\products\Essbase\bin>net start HyS9aps
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Hyperion\products\Essbase\bin>REM EAS
C:\Hyperion\products\Essbase\bin>call C:\Hyperion\products\Essbase\eas\bin\start.bat
C:\Hyperion\products\Essbase\bin>REM eas
C:\Hyperion\products\Essbase\bin>net start HyS9eas
The requested service has already been started.
More help is available by typing NET HELPMSG 2182.
C:\Hyperion\products\Essbase\bin>REM EssbaseAgent
C:\Hyperion\products\Essbase\bin>net start hypservice_1
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
C:\Hyperion\products\Essbase\bin>REM EssbaseStudio
C:\Hyperion\products\Essbase\bin>C:\Hyperion\products\Essbase\EssbaseStudio\Server\startServer.bat
C:\Hyperion\products\Essbase\bin>setlocal
C:\Hyperion\products\Essbase\bin>set CONFIGTOOL_HOME="C:\Hyperion\common\config\9.5.0.0"
C:\Hyperion\products\Essbase\bin>call ""C:\Hyperion\common\config\9.5.0.0"\setJavaRuntime.bat"
Logging configuration file is not found. Expected filename is C:\Hyperion\products\Essbase\bin\.\server.properties
Log file location is:
C:\Hyperion\logs\esbstudio\server.log
13:23:09 11/01/11 INFO Starting up
13:23:09 11/01/11 INFO Oracle Essbase Studio Server. Version 11.1.1.3.00, Bui
ld 090, June 25 2009
13:23:16 11/01/11 (system) WARNING Failed to load driver for sap
13:23:16 11/01/11 (system) SEVERE Cannot load Teradata connector
13:23:16 11/01/11 (system) WARNING Failed to load driver for teradata
13:23:16 11/01/11 (system) WARNING Failed to load driver for mysql
13:23:16 11/01/11 (system) WARNING Failed to load driver for netezza
Essbase.log:
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Error(1051223)
Single Sign On function call [css_init] failed with error [CSS Error: CSS method invocation error: com.hyperion.css.CSSSystem.<init>]
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Info(1051198)
Single Sign-On Initialization Failed !
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Info(1051232)
Using English_UnitedStates.Latin1@Binary as the Essbase Locale
[Tue Oct 25 11:26:31 2011]Local/ESSBASE0///Error(1051527)
In Shared Services Security mode it is not possible to start Essbase when single sign on initialization fails.
AND
C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)
2011-10-25 11:26:11,039 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-10-25 11:26:11,039 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)
2011-10-25 11:26:11,085 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)
2011-10-25 11:26:31,023 ERROR [main] 20:1092:Failed to initialize EPM System registry. *[Root Cause: java.sql.SQLException: [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: machinex:1433. Reason: Connection refused: connect ] com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
*2011-10-25 11:26:31,023 ERROR [main] Arguments: param1={}, param2=null, param3=C:\Hyperion\logs\essbase\,* com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
2011-10-25 11:26:31,023 INFO [main] CSS system intialization failed. : [21484 ms] com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)
What I have attempted:
- Attempted to connect to Shared Services, Workspace url's - YES
- Checked openLDAP & my Database is running - YES
- Added following to Configuration File :
SharedServicesLocation machinex 28080
AUTHENTICATIONMODULE CSS http://machinex:28080/interop/framework/getCSSConfigFile YES, but same error
- Changed essbase.bak to essbase.sec YES but same error
- netstat -an to check for 1423. Port 1423 is not listening, although ALL TCP Ports have been enabled. So YES but same error.
- Read Knowledgebase article # 954322.1 - the suggested things in there don't seem to apply to my case, unless I am missing something.
At this point does anybody have any suggestions ?An update: Just for kicks, I tried restarting Essbase using Start->Programs-EPMSystem->Essbase->EssbaseServer->Essbase.bat and apparently now Essbase is started.
EAS, Studio and Planning however are down.
Excerpt from the HyS9eas-sysout.log:
[ERROR] RegistryUtils - SQL Exception when trying to create a new connection [Hyperion][SQLServer JDBC Driver]Error establishing socket to host and port: machinex:1433. Reason: Connection refused: connect
* CRITICAL ERROR: Common Security Services initialization failed. Please *
* make sure that a valid entry is provided for SECURITY_CONFIGURATION in *
* OlapAdmin.properties. This is required if Shared Services is enabled. *
* Please restart the server after the changes. *
Stopping DAO factory!
HBR Configuration has not been initialized. Make sure you have logged in sucessfully and there are no exceptions in the HBR log file.
java.lang.ExceptionInInitializerError
.... bunch of java code.
This is really strange. There is NOTHING that I changed, started or stopped which could have caused Essbase to start magically all of a sudden.
Any insights into the cause of all this ? -
I get a dialog box from Xmarks that "Firefox service initalization failed". Please advise.
The Xmarks icon shows a question mark and a shows "Xmarks has encountered an error''. On clicking the icon the Xmarks settings dialog box shows the current status as PROBLEMS SYNCING "Firefox service initialization failed" and that "Firefox reports that some services are unavailable".
Please advise action to take.Yoono. I uninstalled Yoono and the problem went away. However, it does seem like a nice application since it brings all your social networks together in a column on the left side of the screen that are active while you can be doing something else like searching the web or reading your e-mail. When I'm in e-mail however, I want a fuller screen and when I try to collapse the Yoono column, I get that warning message and it won't allow me to.
-
Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj -
Error when getting service facade : Service manager initialization failed I
Dear Friends,
we have created entities in CAS((nwds 7.0.1)) and deployed in J2ee.
During Testing:
when we right click on entity and click on test.
service Browser. is opening with two Buttons.
One Button it is " start with CAF source".
when we select this its throwing error
Error text:
Error when getting service facade : Service manager initialization failed Illegal argument exception: Unable to create javax.ejb.EJBObject. because of this we are unable to test the entity.
request to throw pointers to clear this error.
Answers will be rewared.
Regards
shekar chandraeven if go using this url http://hostnae:portname/caf
i could see the main page then i click TestTools->Service browsser, Still lso i am getting the same screen with Buttons.
one saying "Start with CAF Source" @ other "Start with ABAP
Source"
If .ear is one of the cause I have removed all the projects from DC->.dtr.Now my NWDS is empty.
Still why it is comming.
Regards
Shekar Chandra -
I've asked this question in SQL Server Upgrade forume, I'm asking here as well:
Your help is highly appreciated!
After migrating ReportServer db from 2008 to 2012, when access Report Manager throughhttp://myserver:80/Reports, I got the error below:
ui!ReportManager_0-3!11d8!02/04/2013-15:19:12:: e ERROR: Software Usage Metrics initialize failed
The process is below:
•I successfully installed SQL Server 2012 (64-bit) Enterprise as a Native Mode on a server who runs Windows 7 Enterprise SP1 (64-bit).
•I restored "ReportServer2008To2012" and "ReportServer2008To2012TempDB" in SSRS 2012 from the db files backed up in SQL 2008. In SSRS 2008, I have SSRS Model, ad-hoc reports based on model, and I also have canned reports built through BIDS
report server project.
•I reconfigured both databases' Compatibility level to SQL Server 2012(110) from SQL Server 2008(100).
•I configured SSRS through Reporting Services Configuration Manager as below:
> I chosen "Use built-in account:" as Service Account
> In "Database" tab, I selected "Choose an existing report server database" and choose "ReportServer2008To2012" db, I used "Windows Authentication" (my login has the System Administrator priviledge). I got all 4 parts
success: Verifying database sku = Success; Generating rights scripts = Success; Applying connection rights = Success; Setting DSN = Success.
> I went to "Scale-out Deployment" to check if the initializing succeed, I found nothing there.
Here are what I did from different approaches:
A •I went to "Encryption Keys" and restored the key I backed up from SSRS 2008, after retoring, I got two initialized instances: One is on my current server (SSRS 2012), the other one is from the old server (SSRS 2008).
I deleted the old one(SSRS 2008) through "Remove Server" action and kept the one on my current server(SSRS 2012).
After I restart SSRS service, and tried to connect Report Manager, I got "An internal error occurred on the report server. See the error log for more details."
I checked the log file, the error is actually "ERROR: Software Usage Metrics initialize failed"
B •I also tried to "Delete Encrypted Content" and did see the SSRS was initialized through checking it on "Scale-out Deployment", however when I tried to open Report Manager, I got the same error.
Anyone had the same issue? Any solution? Thanks in advance!Your help is highly appreciated!
After migrating ReportServer db from 2008 to 2012, when access Report Manager through
http://myserver:80/Reports, I got the error below:
ui!ReportManager_0-3!11d8!02/04/2013-15:19:12:: e ERROR: Software Usage Metrics initialize failed
The process is below:
•I successfully installed SQL Server 2012 (64-bit) Enterprise as a Native Mode on a server who runs Windows 7 Enterprise SP1 (64-bit).
•I restored "ReportServer2008To2012" and "ReportServer2008To2012TempDB" in SSRS 2012 from the db files backed up in SQL 2008. In SSRS 2008, I have SSRS Model, ad-hoc reports based on model, and I also have canned reports built through BIDS
report server project.
•I reconfigured both databases' Compatibility level to SQL Server 2012(110) from SQL Server 2008(100).
•I configured SSRS through Reporting Services Configuration Manager as below:
> I chosen "Use built-in account:" as Service Account
> In "Database" tab, I selected "Choose an existing report server database" and choose "ReportServer2008To2012" db, I used "Windows Authentication" (my login has the System Administrator priviledge). I got all
4 parts success: Verifying database sku = Success; Generating rights scripts = Success; Applying connection rights = Success; Setting DSN = Success.
> I went to "Scale-out Deployment" to check if the initializing succeed, I found nothing there.
Here are what I did from different approaches:
A •I went to "Encryption Keys" and restored the key I backed up from SSRS 2008, after retoring, I got two initialized instances: One is on my current server (SSRS 2012), the other one is from the old server (SSRS 2008).
I deleted the old one(SSRS 2008) through "Remove Server" action and kept the one on my current server(SSRS 2012).
After I restart SSRS service, and tried to connect Report Manager, I got "An internal error occurred on the report server. See the error log for more details."
I checked the log file, the error is actually "ERROR: Software Usage Metrics initialize failed"
B •I also tried to "Delete Encrypted Content" and did see the SSRS was initialized through checking it on "Scale-out Deployment", however when I tried to open Report Manager, I got the same error.
Anyone had the same issue? Any solution? Thanks in advance! -
On starting Essbase, system throws error "CSS Initialization Fails"
Hi
I have been using the hyperion essbase in the past.
Today the someone removed the network cable connecting to the servers. I put them back but since then i am facing issue where i cannot connect to Essbase server.
I tried restarting the essbase server. On starting the server it first gives the warning:
log4j:WARN No appenders could be found for logger (com.hyperion.css.common.CSSLo
gger).
log4j:WARN Please initialize the log4j system properly.
But it continues and then prompts error
[Fri Mar 18 17:06:02 2011]Local/ESSBASE0///Error(1051429)
Essbase Product Existence Check Fails against the Shared Services Server with Er
ror [Unable to connect to Shared Services, make sure the Shared Services server
is running and try again.]
Fatal Error: CSS Initialization Fails
I checked the Shared Services service, and it is running fine. My environment is a distributed environment where shared services(foundation) are installed on different machine than Essbase server
Did anyone also face the problem... please helpHi John
Thanks for the reply. I am able to login and navigate through HSS using the following URL: http://punitp165594d:28080/interop/
Following are the log entries in SharedServices_Security_Client.log when i tried to start the Essbase server:
*2011-03-21 13:20:48,803 INFO [main] CSS is initialized as client. The default logger properties will be loaded com.hyperion.css.CSSSystem.<init>(Unknown Source)*
*2011-03-21 13:20:48,819 INFO [main] CSS Log file will be generated at C:\Hyperion\logs\essbase\SharedServices_Security_Client.log com.hyperion.css.CSSSystem.<init>(Unknown Source)*
*2011-03-21 13:20:48,819 INFO [main] Configure CSS with registry com.hyperion.css.CSSSystem.initCSSSystem(Unknown Source)*
*2011-03-21 13:20:48,819 INFO [main] Initializing CSS from Registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration(Unknown Source)*
*2011-03-21 13:20:48,865 INFO [main] Trying to get Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
*2011-03-21 13:20:52,176 INFO [main] Got Registry Instance com.hyperion.css.registry.RegistryManager.<init>(Unknown Source)*
*2011-03-21 13:20:53,535 INFO [main] Got hub location from Registry:http://<servername>:28080 com.hyperion.css.registry.RegistryManager.getHubLocationFromRegistry(Unknown Source)*
*2011-03-21 13:20:54,238 INFO [main] Got native directory location from Registry:<servername>:28089 com.hyperion.css.registry.RegistryManager.getNativeProviderLocationFromRegistry(Unknown Source)*
*2011-03-21 13:20:54,253 INFO [main] URL constructed out of values in Registry database:ldap://<servername>:28089/dc=css,dc=hyperion,dc=com com.hyperion.css.common.configuration.CSSConfigurationImplXML.initConfiguration(Unknown Source)* -
I have two cFP-2120 RT controller. They both have NI-Serial RT2.5.6, DataSocket for LV RT4.2, NI-VISA 3.6, FP Drivers 5.1.0, FP VI Manager 3.1.0 LV RT 7.1.1 installed. But one same vi can run on one controller but not another.
the error message got when it runs on another controller is "Error -32810 occurred at The FieldPoint server initialization failed. Possible causes: 1. Missing or corrupt configuration file; 2. Failed to create callbacks. : FP Open.vi"
I wonder by what it is caused?
ThanksHi Matthew,
As mentioned previously, this KnowledgeBase article may be of some help. Also, if your code is being run on an embedded controller and then a network controller (not embedded), you will need to run the program differently. On the embedded controller, you should deploy your VI in a Project Explorer or programmatically (as described here.) However, you do not need to deploy the program to a network controller, but simply run the VI.
I would also suggest creating a new .IAK file. Do you still see the same error? Also, double-check that the software installed on the controller matches the software installed on the host PC. If you have any file paths associated with one FieldPoint controller, ensure that you are changing them to match the second controller.
Please keep us posted on your troubleshooting steps. Have a great day!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments -
File Adapter: Initialization error: Conversion initialization failed
Hi all,
I'm trying to establish a file adapter (FTP, File Content Conversion).
In the adapter monitor I' ve got the following error:
Sender Adapter v1325 for Party '', Service 'BS_ACN_PCS_A':
Configured at 14:49:34 2005-08-29
Initialization error: Conversion initialization failed with java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found:
Format error in 'xml.recordset' argument: incomplete structure (name,number) pair
My content conversion parameters are:
BP_BusinessPartnerMasterData_IncomingData.fieldFixedLengths:
20,50,50,1,10,50,10,50,5,20,20,15,15
BP_BusinessPartnerMasterData_IncomingData.fieldNames: Number,Name2,Name1,Gender,Birthdate,City,Postcode,Street,
HouseNo,PhoneNumber,Fax,BankId,BankAccount
BP_BusinessPartnerMasterData_IncomingData.fieldContentFormating:
trim
BP_BusinessPartnerMasterData_IncomingData.keyFieldInStructure:
ignore
What could be the error or where I have to look for it?
Thanks,
FabianYes,
Recordset name: BP_BusinessPartnerMasterData_IncomingData
Recordset structure: BP_BusinessPartnerMasterData_IncomingData
The corresponding Message Type:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://pcs.acn.com/basicdata" targetNamespace="http://pcs.acn.com/basicdata">
<xsd:element name="BP_MasterDataIncomingFil" type="BP_BusinessPartnerMasterData_IncomingData" />
<xsd:complexType name="BP_BusinessPartnerMasterData_IncomingData">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
f323a4b018a911da9fd9000bcd69ce64
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="Number">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e8500fe111da89f2d1210a87220d
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Id from Sender for BP
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="20" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Name2">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e8510fe111dacfd7d1210a87220d
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
Last name or Company name
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Name1">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e8520fe111da94bad1210a87220d
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
First name or Company name 2
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Gender">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e8530fe111da99add1210a87220d
</xsd:appinfo>
<xsd:documentation xml:lang="EN">
m or f or blank
</xsd:documentation>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Birthdate">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e8540fe111dab156d1210a87220d
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="City">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e8550fe111daa58cd1210a87220d
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Postcode">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e8560fe111dac0c2d1210a87220d
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Street">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e8570fe111dabbd3d1210a87220d
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="HouseNo">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e8580fe111dab63fd1210a87220d
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="5" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="PhoneNumber">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e8590fe111dac782d1210a87220d
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="20" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="Fax">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e85a0fe111daa9ebd1210a87220d
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="20" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="BankId">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e85b0fe111dace1ed1210a87220d
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="15" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="BankAccount">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
7679e85c0fe111da8801d1210a87220d
</xsd:appinfo>
</xsd:annotation>
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="15" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema> -
Hi
Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
Hub Transport Role
Failed
Error:
The following error was generated when "$error.Clear();
if ($exsSid -eq $null -or $exsSid -eq "")
$exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
" was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:25:35
Sandeep GuptaHi,
It might be a permission issue.
1 :
Add Manage auditing and security log Properties
Administative Tools > Local Security Policy > Local Policies > User Rights
Assignment > Manage auditing and security
Add
Exchance Servers.
2. Check Exchange Trusted Subsystem
1)Open Active Directory Users and Computers
2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
the right hand side select the Administrator group,goto the properties
3)Click members tab and add Exchange Trusted Subsystem
4)Click ok twice
5)Reboot the Exchange server
6)Rerun the Exchange setup
Best Regards! -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva -
AS startup - JMS service startup failed
After sucessful instalation of AS7 on sparc Solaris 8, I've got error during startup.
[10/Jul/2003:16:42:12] INFO ( 1145): CORE1116: Sun ONE Application Server 7.0.0_01
[10/Jul/2003:16:42:13] INFO ( 1146): CORE3016: daemon is running as super-user
[10/Jul/2003:16:42:18] INFO ( 1146): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.1_01] from [Sun Microsystems Inc.]
[10/Jul/2003:16:42:56] INFO ( 1146): JMS5035: Timed out after 30000 milliseconds while trying to verify if the JMS service startup succeeded.
[10/Jul/2003:16:42:56] INFO ( 1146): JMS5036: More details may be available in the log file for the JMS service broker instance domain1_server1. Please refer to the JMS provider documentation for the exact location of this log file.
[10/Jul/2003:16:42:56] SEVERE ( 1146): JMS5024: JMS service startup failed.
[10/Jul/2003:16:42:56] SEVERE ( 1146): CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:247)
at com.iplanet.ias.server.ApplicationServer.onInitialization(ApplicationServer.java:206)
at com.iplanet.ias.server.J2EERunner.confPreInit(J2EERunner.java:114)
Caused by: com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:231)
... 2 more
Caused by: javax.jms.JMSException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSException(ExceptionHandler.java:183)
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleException(ExceptionHandler.java:136)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:145)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.init(PortMapperClient.java:86)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.<init>(PortMapperClient.java:47)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPConnectionHandler.<init>(TCPConnectionHandler.java:46)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler.openConnection(TCPStreamHandler.java:101)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.init(ProtocolHandler.java:501)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.<init>(ProtocolHandler.java:930)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.openConnection(ConnectionImpl.java:1482)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.init(ConnectionImpl.java:403)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<init>(ConnectionImpl.java:234)
at com.sun.messaging.jmq.jmsclient.UnifiedConnectionImpl.<init>(UnifiedConnectionImpl.java:33)
at com.sun.messaging.jmq.jmsclient.QueueConnectionImpl.<init>(QueueConnectionImpl.java:32)
at com.sun.messaging.ConnectionFactory.createQueueConnection(ConnectionFactory.java:72)
at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.pingProvider(JMSAdminImpl.java:733)
at com.iplanet.ias.jms.JmsProviderLifecycle.waitForJmsProvider(JmsProviderLifecycle.java:284)
at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:224)
... 2 more
[10/Jul/2003:16:42:56] SEVERE ( 1146): CORE3186: Failed to set configurationThis seems to be the same problem as one described in: http://swforum.sun.com/jive/thread.jsp?forum=68&thread=20049
Double check JMS port assignments - port might already be in use by some other process and should be changed.
Hope this helps... -
AcroDist.exe-DLL Initialization Failed on logoff/shutdown in XP x64
Acrobat 9 Pro
Windows XP Professional x64 Edition
Intel Pentium Dual CPU E2160 1,8GHz
2GB of memory.
The title of the window of error is "AcroDist.exe - DLL Initialization Failed" and the message is "The application failed to initialize because the window station is shutting down." Behind the window is "Ending AcroTrayIcon". These messages occur when you logoff/shutdown and log into the system the first message reappears.
If I close the process acrotray.exe before you logoff, the error does not occur.
I am grateful for the help.Hi,
I have removed the SMD command lines from config tool, i have restarted the Instance now i am facing the new error one .
Sandbox is copied from Instance DBW and all services are pointing to DBW... even the message server also. please suggst where i have to change these settings..
Thr 59500] Mon Jul 07 14:12:27 2008
[Thr 59500] JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
[Thr 59500] ***LOG Q0I=> NiPGetServByName2: service 'sapmsDBW' not found: getservbyname_r [ninti.c 530]
[Thr 59500] *** ERROR => LgIGroupX: NiServToNo(sapmsDBW) failed, (rc=NIESERV_UNKNOWN) [lgxx.c 4168]
[Thr 59500] *** ERROR => JRFC> Error jrfc_lg LgGroup failed(-102) [jrfclg.c 344]
[Thr 59500] *** ERROR => mshost: nbcddsabw10, msserv: sapmsDBW, r_group: TICDEV [jrfclg.c 345]
[Thr 59860] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 59860] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 59860] JLaunchCloseProgram: good bye (exitcode = -11113)
Thanks,
Subhash.G -
Oracle Windows Sevice does not start (ORA-12640: Authentication adapter initialization failed)
I converted a physical windows 2003 machine to a virtual hyperv machine.
The following error occurs in oradim.log when I try to start the Oracle Windows Service on the virtual server:
ORA-12640: Authentication adapter initialization failed
I recreated the service and the password file but with no luck.
I also tried to change sqlnet.ora with the following: (Replaced NTS to NONE)
SQLNET.AUTHENTICATION_SERVICES= (NONE)
In this case the service was started but when I tried to connect as sysdba using sqlplus "/ as sysdba" the "ORA-01031: insufficient privileges" error occurs. If you connect using the password then it connects fine. But I would like to be able to connect without a password because I have some scripts that I do not want to hardcode the sysdba password.
I also removed and readded the administrator password from ORA_DBA group but again with no luck.Have you seen this:
Oracle Database Service on Windows 2000 in AutoStart Mode with Logon as SYSTEM
(Bug 1397927) If you have installed an Oracle database service on Windows 2000, when logging in as SYSTEM user (Local System), with startup mode set to Automatic, it is possible that the Oracle database service starts but the database does not start automatically. The following error message is written to the ORADIM.LOG file in the ORACLE_BASE\ORACLE_HOME\DATABASE directory.
ORA-12640: Authentication adapter initialization failed
It has also been observed that the services like Oracle Enterprise Management Agent, Oracle Enterprise Manager Management Server and Oracle Internet Directory may also fail for the same reason because they cannot connect to the database.
The workarounds for this problem are:
Remove the line sqlnet.authentication_services=(NTS) from SQLNET.ORA or set sqlnet.authentication_services=(NONE) in SQLNET.ORA.
Start the database manually after the Oracle database service has started using SQL*Plus connecting as user name INTERNAL. Note that the INTERNAL user name will not be available after release 8.1.7.
Start the service as a specific user:
Choose Start > Settings > Control Panel > Services. The Services dialog box appears.
Select the service you want to start.
Click the Startup button. The Service dialog box appears.
Click This account and specify the user name and corresponding password.
Maybe you are looking for
-
What cable do I need to purchase to watch videos and photos on my t.v.?
My t.v. is analog, so is there a chord to connect my iphone to that tv I also will be purchasing a new HD so what will chord will i need to purchase the chord for this tv?
-
I am trying to call sharepoint online from powershell. Below is the code. I get Exception calling "ExecuteQuery" with "0" argument(s): "The remote server returned an error: (407) Proxy Authentication Required." $loadInfo1 = [System.Reflection.Assemb
-
Some older addresses that sync from Outlook no longer showup on my ipad and iphone. Data is in Outlook and in Icloud contacts. Any suggestions? Some of the newer addresses seem to sync but the older ones (family) addresses are not. The data is sh
-
Change Discount Base in Invoice
Dear Gurus, There is a posted invoice created using reference and as the Discount Base was not changed new documents got posted with the wrong Discount Base. How can I change the Discount Base, I tried using FB02, but it does not allow me to make any
-
Hi PM Gurus, Can you tell me about the performance based maitenance : 1. Measuring Point (M.P.) 2.Counter What are the characterstic units come under the Measuring Point.is it right that only we can give upper and lower limit in M.P not in counters.A