Mask from Speedgrade via lumetri  in PProCC Bug?

I create a mask in Speedgrade and want to use it in PProCC via Effects/Colorcorrect/ Lumetri.
As long as the mask is inside the picturesize (speeedgrade) all is ok.
As soon as the outer line from the mask mask goes outside the picture(speedgrade), the mask as an artefakt in PProCc on the left side.
bg
alex

Thanks Dennis,
Yes works now,
just let you know that we had to upgrade both  Speedgrade and PPro.(checked on another worstation)
Won`t upgrade PPro on currenttly workstation, because we are middle in a project.
bg
alex

Similar Messages

  • Problems with masks after sending sequence back from SpeedGrade to Premiere (CC)

    Hello,
    I'm colour grading a clip in SpeedGrade  CC using the new direct link function. For the colour grading I used  different layers and also masks. Once I'm done I sent my sequence back  to Premiere Pro CC.
    I see, Premiere shows me exactly the colour correction I did in SpeedGrade except of one thing:
    The places where I used masks in SpeedGrade to light them for instance a bit up are now full of pixeled lines...
    I thought it's just a problem with the Preview, so I exported it. The pixeled lines stayed.
    Again: In SpeedGrade is everything fine, but when I'm sending the sequence back to Premiere there are these pixels.
    It's  really irritating because one day before it worked very good without  any problems and I was practically doing the same as now.
    Please help me, if you can! Thank You!

    Thank you but my masks are not animated. Premiere just can't reflect the colour correction I did for these masks. Here's an example...on the right edge I created a mask in SpeedGrade. And that's what Premiere is showing me when I send the sequence back from SpeedGrade to it:
    Does anybody know the solution?

  • Please help! How do I unlink a mask from a layer in Motion?

    How do I "unlink" a mask from a layer so when the object on the layer moves, the mask stays still?
    (Similar to how you unlink a mask in Photoshop by clicking on the link icon beside the layer thumbnail)ghgh
    This is propably very simple, but I can´t figure this out or find it anywhere searching on the net or in the manual (already wasted almost two hours on this and my deadline is coming uncomfortably close...)
    Hope somebody can help I´m getting desperate now

    Would moving the mask to the Group containing the layer you want to animate give you the result you're looking for?
    Your layers list would look like this:
    If there are other layers in the group, then you would need to nest the masked group so as to not affect the other layers.
    You could also add a shape and use that as an image mask which includes a stencil option.
    Draw your shape
    Select the image you want to mask
    Add Image Mask (shift+command+m) via the object menu
    Drag your shape to the image mask
    Your layer list would look like this:

  • Cannot Render from SpeedGrade CS6

    So, I'm doing some testing to see if SpeedGrade CS6 is for me or not, and honestly…I love what I've seen so far. But, I'm having an issue that's probably easy to resolve (no pun intended), but for the life of me I can't figure out why.
    I put a quick sequence of 4K R3D files together in Premiere CS6, exported an EDL, opened the EDL in SpeedGrade and linked back to the footage. Everything seems to work fine. I've graded my clips, added a vignette, and now I'm trying to render/export. But the "Render" button seems permanently greyed out. No matter what combination of output options I choose, it just won't let me start a render session. I'm running the latest CS6, updated via the Adobe Updater. I'm working on a 15" MacBook Pro with Core i7 processor and plenty of RAM. The only connected peripheral is a Thunderbolt RAID setup.
    Any ideas why I can't render?
    Thanks!

    Hello Stephen,
    simple things first...
    Did you set an output name?
    If not, the render button will be grayed out.
    Cheers
    Thomas
    Am 21.06.12 21:25, schrieb stephenamick:
    >
          Cannot Render from SpeedGrade CS6
    created by stephenamick <http://forums.adobe.com/people/stephenamick> in /SpeedGrade/ - View the full discussion <http://forums.adobe.com/message/4511674#4511674

  • What is the difference between Create shapes or masks from text characters?

    What is the main difference between Create shapes or masks from text characters and why use one over the other, or when is one preferred over the other?
    I am still fairly new to AE and am trying to better understand this, or can you point me to where i might look for the answer?
    CS5 if that make a difference.

    One creates masks, the other creates shape layers. There are properties that you can animate with shape layers that are not available to masks. There are also a few things you can do with masks that you can't with shape layers.
    I'd suggest you take a look at the help files or do a Google Search on After Effects Shape Tutorials.

  • Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

    Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

    Hi there
    I'll pass your details to our Russian team and they'll contact you to assist further.
    Kind regards
    Bev

  • Error while calling applet from Javascript via LiveConnect and WebDriver

    Hi all,
    I am trying to call applet Java code from Javascript via WebDriver.
    Given the following two cases:
    - calling a static method: Integer.parseInt("42")- constructing a new object: new String("Hello world")My Javascript code looks like this:
    document.appletId.Packages.java.lang.Integer.parseInt("42");
    new document.appletId.Packages.java.lang.String("Hello world");When executing this code in Firefox via the Firebug Javascript console everything works fine and I get the expected results. However, when executing this code via the JavascriptExecutor from WebDriver only the call to the static method succeeds, the construction of the new object leads to the following error: "Attempt to call a default method on object with no invokeDefault method."
    I don't have any idea what is going wrong here, so any help would be greatly appreciated.
    Thanks!

    Hello Gerard, Hello Krishna,
    -> The liveCache application failed with COM error::
                                   40028 Illegal timestamp in rough timegrid
    More details about COM error 40028 you will see in TA /n/sapapo/om10
         -> Return code: 40028 -> execute ::
    Invalid time stamp in the time buckets profile relation     
    ( om_ts_tgrelinvalidstamp )     
       < click on '?' mark >
    -> Open an OSS message in accordance with SAP note 167280 if further help
         needed to solve the issue on your system.
    Thank you and best regards, Natalia Khlopina

  • I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help :(

    I recently purchased songs from itunes via my pc and I dont know how to get them onto my iphone? When I click the sync button it says I will lose all the music currently on my iphone.. Help

    If you're syncing with a different iTunes library than the one you previously synced with, then there is no way around it. You're gonna loose the old data. The only way round it would be to make sure that all the music files on your iPhone is also in your iTunes library. If you still have access to the computer with the old library, you could copy the files on to an external harddrive, and then import them into your new iTunes library.
    If it is in fact the same library, then the music currently on your iphone, is also in your itunes library. Just make sure that the artists/albums/playlists, or whatever you sync contains these tracks, that you allready have on your phone and don't want deleted. What i do is, i create a playlist specifically for my iPhone, and i set it up to only sync with this playlist. Whenever i hear a track from my iTunes library or buy a new track that i want on my phone, i just drag it to this playlist and next time i synchronize, it's there without deleting anything else.

  • Display data in Web DynPro table from database via EJB

    I have a JavaBeans model which has a method populateDataToTable()to retrieve data from database via Session bean (calling entity bean, returning ArrayList of data) and the data needed to be display in the Web DynPro table.
    User Interface (Web DynPro) <-> JavaBeans Model <-> Busineess Logic (session bean) <-> Persistence (Entity Bean)<-> DB table.
    The context bindiing and table part is ok. How do i load the data to the table ? what the coding to put in wdDoInit() ?
    Any help would be appreciated.

    in wdinit(),
    Collection col = new ArrayList();
    try{                    
      MyCommandBean bean = new MyCommandBean();
      col = bean.getDataFromDbViaEJB();
      wdContext.nodeMyCommandBean().bind(col);
    } catch (Exception ex) {
       ex.printStackTrace(ex); 
    in your JavaBean model class, MyCommandBean getDatafromDbViaEJB() method:
    Collection col = new ArrayList();
    Collection newcol = new ArrayList();
    //include your own context initialization etc...
    col = local.getDataViaSessionBean(param);
    // if your returned result also a bean class, reassigned it to current MyCommandBean
    for (Iterator iterator = col.iterator(); iterator.hasNext();) {
        MyOtherBean otherBean=(MyOtherBean)iterator.next();
        MyCommmandBean bean = new MyCommandBean();
        bean.attribute1 = outBean.getAttirbute1();
        // get other attibutes
        newcol.add(bean);
    return newcol;

  • Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

    Hi I have two macbook pro, i connected one from another via lan cable , now when i removed it, its showing me some pop up again and again saying server may not exists and there was a problem connecting to ishan's macbook pro

    If you just reboot it, does the problem go away?

  • Trouble capturing video from VHS via Analogue to DV converter

    I use Final Cut Express 1.0.1 and I've always been able to capture video from VHS via a Director's Cut analogue to DV converter box. Today it keeps freezing on me. I've tried force quit, logged off and back on again and even re-started the computer. I've got plenty of space on my two hard drives (125GB free on main drive and 85.42GB on my scratch disk).
    I'm sure I've set the rest up correctly (composite cable from VHS to DV convertor box set to output and connected to input slots on box, and DV box set to capture). The box is correctly connected to the Mac.
    I've also logged on using another user's account to see if the same problem occurs, and it does. I believe this means that dumping the my preference file won't help, but please correct me if I'm wrong. Any ideas how to stop this freezing on me would be much appreciated.
    Thanks
    Karen

    Last bit of help from Martin may have some mileage in it as far as excluding hidden problems with the drive you are capturing too.
    Have been reading into the requirements for the hard disc and it does make it clear having a separate one like you have is almost a requirement because of the work it does. Would it be worth trying a small capture to your system disc. If it helps that is how I am working at the moment so it doesn't appear to be instant fireworks if you do use this one but give it some thought first...
    On the firewire port side of things I have seen some unexplained connection issues on this front which were cured by shutting things down, unplugging and then beginning again. Take it System Profile didn't yield anything?
    Now I got back in front of my Mac it appears Quicktime Pro will allow capture from an attached device but appreciate you may not have the Pro bit, iMovie should be as good a test.
    Nick.

  • JCO RFC Provider: "Bean not found" when calling EJB from ABAP via RFC

    Hello,
    I'm having trouble calling an EJB in a CE 7.1 system from ABAP via RFC. I'm trying to use the JCO RFC Provider service, which mean that I want to expose an EJB so that it can be called via Remote Function Call.
    I have documented everything, including the code and the deployment descriptors I wrote, in this thread in the CE forum: Jco RFC Provider: Bean not found
    If there's any chance you can help, please do me a favour and look into the problem.
    Thanks a lot!
    Thorsten

    Hi Vladimir,
    Thank you very much, your help was immensely valuable.
    I just had to add the function declaration to the Home Component interface, everything else was correct, and now it works.
    Cheers,
    Thorsten

  • How do I get LR2 to "load from device" via command line?

    Hi,
    how do I get LR2 to "load from device" via command line?
    I've got XP to load LR2 when a "camera" (and only a camera) is connected but really cool would be if LR2 would also import the pictures.
    cu,
    Michael

    1. Make sure you are using IOS 7.
    2. Make sure your iPad is register in My Support Profile.
    https://supportprofile.apple.com/
    3. Try downloading again; it should be free.

  • I cant successfully send files from pages via email on my ipad

    The files i send from pages via mail hardly ever send, and when they do i am unable to open the file in the mail, i am having the same truble with sending files from the photo library from my i pad

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release

  • Execute Business Transaction from xMII via XI to SAP R/3

    Hello everyone,
             I have a requirement to post the SAP R/3 transaction from xMII via XI. Does anyone one could give me the steps needs to follow to accomplish this.
    Thanks,
    Mahesh

    Mahesh,
    So as i understand your flow is xMII -> XI -> SAP ECC. So basically in this case u can setup XI to host a web service and xMII can call the web-service and post the data to XI. You will have to get the WSDL for the XI Web Service and then use it in the Web Service action block in xMII to consume. You will also need to setup the soap adapter in XI to receive the web service call from xMII. Once xMII calls the web service, XI can then update the data into SAP ECC either thru Idoc or RFC adapter.
    So once your trigger point in xMII is activated, it should call the BLS which in turn will call the XI Web Service and post the data to XI.
    In case the scenario is the other way round you can also host your BLS as a Web Service in xMII. XI can then call the web service and send the data to xMII. Alternatively you can also use the http post action block in xMII to do the same.
    Let me know if you need anymore info.
    Thanks,
    Kapil.

Maybe you are looking for