Mask position and edge issues

I'm encountering a couple of problems with masks in my AE project. I've had no luck finding any similar problems documented anywhere on the internet.
I have footage of a man exiting a room through a door, where the room beyond the door needs to be replaced. I did a basic rotoscope using several masks. I put a blue solid behind the video layer to help show the issues.
The first problem is that one of the mask's edges is off. The mask will not go all the way to the edge of the mask line on one corner.
The second issue is the mask is completely offset on one frame.
I can manually move the masks to compensate for this issue, but their borders don't represent what they should be masking. I'm hoping I may have overlooked something simple.

Odd zoom, motion blur, framerate mismatch between footage and comp, pixel aspect ratio issues. Either or any combination of those. You have not provided enough info to make any sense beyond that.
Mylenium

Similar Messages

Lync 2010 Standard Edition Front-End and Edge Cerificate Renewal issue

Hi Experts,
I have a client with Single Standard Edition FE server and 1 Edge server and both are using PUBLIC certificates. It also has a reverse-proxy server (F5 HLB) with wildcard certificate installed. The FE and Edge certificates are about to expire and the client
now wants the ff.
1. Internal Certificate from Internal CA server for FE
2. External Certificate from Public CA for Edge
What I did was,
A. For Internal Cert - I generated a CSR from MMC cert manager using custom request from the FE server and have it signed by the Internal CA. Reason I did that was, everytime I requested the CSR from Lync Certificate Wizard, it is getting the certificate
template not supported by the Internal CA.
B. For External Cert - I requested the Edge external CSR thru Lync Certicate Wizard and submitted to the client for public CA renewal.
When I installed both certificates, internal lync works fine but anything external (i.e. external lync access, mobile, federation) do not work anymore.
So I decided to roll back the certificates and everything went back to normal?
Question is, what steps or process did i miss or gone wrong? Hope for your response. Thank you in advance.

Hi DaxZilla,
You also need to request a certificate to internal interface of Edge Server from internal enterprise certificate authority.
The certificate for the external edge interface should contain SANs as below:
SAN=Access Edge service FQDN
SAN=Web conference service FQDN
SAN=SIP domain FQDN
Mobile client goes through reverse proxy server to sign in. It is not related with Edge Server. Check the certificate on reverse proxy is not expired.
Best Regards,
Lisa Zheng
Lisa Zheng
TechNet Community Support

I have purchased Iphn 4s recently and since then i m facing issues around Battery back up, Software and even issue around hard drive. I have visited I store where they formatted my phone but nothing positive has happened. How do i escalate?

I have purchased I phone 4S on April 30th 2014. Since I bought this phone, I have been facing issues such as Battery Back up, Software and Hardware issue and hang issue. I had visited I store last month where they just formatted my phone. The issues were not taken care completely, even till now the issues are on. I would appreciate if you could help me with the right escalation desk for raising my voice to Apple team.
I have been using apple product since long now and never face such dissatisfaction in past
Regards,
GB

Hello, when you are having an error on your iPhone and going to the Apple store to get it taken care of, make sure you speak up and provide as much detail as you can. The first iPad Mini I had bought had errors on it, and I didn't speak up and provide further details on my issue.
Hope your issue gets resolved soon!
-RazorOrange

Positioning and role of Edge Transport Server

Good afternoon, all!
I'm working on a new Exchange design and implementation project. I had some research that seemed to indicate that I could have my Edge Transport server in the DMZ to receive Internet mail and to act as a web proxy for the Client Access server residing
in the internal network. However, in my testing I haven't found where that is possible.
Will the Edge Transport server provide that capability or will I need to open a path to the Client Access/Mailbox server? Is there a tradeoff in separating the Client Access server into a separate machine in the DMZ for remote access, that is, if the
Edge Transport server won't supply web proxy services, will I need to make a separate machine for Client Access?
Thanks!
Gregg

Hi Gregg,
Based on my knowledge, Edge Server role handles Internet-facing mail flow and act as an SMTP relay and smart host for Exchange servers in your internal network. We can use Edge server if don't want to expose internal CAS and MBX. We can also
configure Anti-Spam on Edge server to block specific emails.
Unlike other Exchange server roles, the Edge server doesn’t need to be a member of an AD domain, so locating it within a DMZ does not create any difficult firewall configurations.
Confirm that any firewall between your Exchange servers and Edge servers allow port 53 for DNS resolution and port 25 for SMTP traffic.
Thanks
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Mavis Huang
TechNet Community Support

6100g and wrt160n issues

Recently i upgraded from 1.5 meg dsl to 7.1 thru verizon, i just recieved the new router thru the mail and proceded to hook everything up and activate my hide speed internet. Appon doing so i then unhooked the modem to my computer and hooked it thru the router and this is where the issues came into play. After messing with a bunch of settings with no luck i then hooked the modem directly to the computer and the iternet is working again. i then researched this issue and found that i needed to bridge the modem so it will play nice with the router so i did and hooked the modem back to the router again no luck. after talking online with tech support from verizon and having the tech guy remote connect my desktop he did the same steps that verizon provides in the support section on changing the router to bridged and i guess he didnt know internet connection is lost at that point. so i did some more looking and learned that i need to put my host name as verizon.net and the domain name as westell.com. after doing this my router can now get my ip, subnet mask. gateway, and dns servers, but still no internet.
a screen shot of my router status and ipconfig: http://zhost.tk/1/f6906527cd7417ec78f82c9df8efd5b9.JPG
still have no internet thru the router+modem just direct connect thru modem.
Solved!
Go to Solution.

Instead of trying to put the modem into bridge mode, i left it as a routed bridge with hdcp and everything enabled. I turned off the hdcp server on the router kept the ip of the modem @ 192.168.1.1 and put the ip of the wireless router at 192.168.1.253. Connected the modem to the lan port (not wan) on the router making it a simple wireless switch. everything is working fine now

How to check position and length of a field in a structure

Dear All,
DATA : P_DEST TYPE ANY.
Assuming that the structure (P_DEST ) conatins a field called 'ROUTE', how to find the position and length of field 'ROUTE'.
Please help!!
Thank you in advance.
Sravan.

Hi,
you may need to find out the type of a generic interface parameter in a subroutine. To do this, you would use the statement:
DESCRIBE FIELD <f> [LENGTH <l>] [TYPE <t> [COMPONENTS <n>]]
[OUTPUT-LENGTH <o>] [DECIMALS <d>]
[EDIT MASK <m>] [HELP-ID <h>].
The attributes of the data object <f> specified by the parameters of the statement are written to the variables following the parameters.
Regards
Sudheer

Email and Contact Issues

My emails are not coming through to my phone unless I manually refresh. I have three accounts setup (Yahoo! and 2 school email accounts). Both school accounts, when I sign on from a computer says something about Outlook: one says Mircosoft outlook and the other says Outlook live.
I contacted my school and got the correct settings for each account. They work because I get the emails as long as I manually refresh. I initially had my phone set to check for mail every hour but after realizing it was not automatically doing this, I set it for every five minutes. That still didn't help.
Out of frustration, I called Verizon who told me they knew nothing about such an issue. They connected me to Samsung who said the same thing. Apparently they were both lying as I have Googled this issue and see that it has been posted since Sept 2010. I just have not noticed a solution (possibly overlooking it).
The solution that they gave me was so a hard reset (didn't work), delete then re-add the accounts (didn't work) or use a workaround. My response to their last suggestion was that I did not feel it was necessary for me to do that when the phone I purchased was supposed to handle email. This has been an issue since I got the phone in Nov 2010 when I switched to VZ. I didn't really notice it until this month because I was having text messaging issues which they didn't fix until this month.
Samsung ended up telling me to send them my phone and they would troubleshoot it but I had to contact VZ about getting a loaner phone as they were going to have it for a week. When I called VZ back, they told me they would just send me a replacement phone and to not send the phone to Samsung because they could have given me a defective phone. The order wasn't placed because their system was down that Friday and the guy was supposed to call me back. He never did so I called VZ a third time.
The tech support rep told me that she was positive that if I got a brand new phone I would still have the same problem because its a known issue that Samsung has yet to fix. Also she had the same phone and also some other people she worked with. She told me to make sure I deleted junk mail, sent stuff, kept the inbox down, and empty the trash and that should help. She was supposed to call me back and see if it helped (which it didn't). She never called back....that was Monday and today is Friday.
Now I'm feeling like they are lying to me because they don't want to replace my device. Then on top of that they told me it would more than likely be a refurbished device instead of a brand new device even though I still have a warranty. Should I push for a new phone or is this really a known issue with Samsung that they have yet to fix? If it is a Samsung issue, what's the workaround until they actually fix it?
By the way, Gmail works almost instantaneously. They told me to forward all of my mail there but that didn't work for my two school accounts. I don't like that anyway.
As for the contact issues, I just noticed two weeks ago that my Facebook and Twitter contacts are unsyncing themselves. I don't have all of my Facebook friends or Twitter followers in my phonebook but those whose phone numbers I have, are linked to their Facebook and or Twitter accounts but I notice that both of these accounts unlink themselves. I have no idea why this happens. I keep having to go back into my phonebook and relink about 30 people to their Facebook and or Twitter profiles. Any idea why?

10sEn wrote:
In your email app, have you tried going into each account, pressing the menu button, account settings, and setting email check frequency to the desired time?
If that's not the issue, then perhaps pressing the menu button at the home screen, going into settings, accounts and sync, and clicking the background data option is the issue.
The reason why Gmail works well is that instead of polling (which is what the email app uses, where it queries the account to see if there's anything new), it pushes your email through meaning that it's virtually instantaneous.
With regards to the Twitter and Facebook issue, try going into the accounts and sync area that I mentioned before. There, you will be able to set the SNS sync interval and sync the contacts, birthdays, and whatever else it allows. You'll probably have to click on each of those accounts to check various options before it will autosync.
My frequency is set to every 5 mins. That hasn't worked.
The background data sync option is clicked already.
The Twitter and Facebook SNS syncing is set. I have noticed though that sometimes when I go in there, the sync arrow is red by Twitter and Facebook. I uncheck the box and recheck it and then it turns green again. What I don't know is why it randomly turns red in the first place. I'm assuming this is the reason the Facebook and Twitter stuff unsyncs itself.

Project Gantt Bar Bug in P6 (EPPM and PM) - A strange and Unique Issue

Hello All,
I have 18 projects in my production EPS but one has a problem, i've been unable to resolve, so far.
The Issue*
In the Project-Layout-View (Project Space), when I look at project X's Gantt Bar, following is observed.
A- When he Project is Open:
All is good. There is no issue.
1- The bar length and position are good, i.e., it starts and ends at right location on the timescale.
2- The bar has two colours (blue for actual and green for remaining) separated at the point where the Data Date is.
3- Project Baseline Bar is all good
B- When the Project is Closed:
The Bar goes corrupt.
1- The bar starts at the right spot on timescale but goes beyond its forecast finish by about 1 year.
2- The whole bar has only one colour, blue, which mis-informs the viewer that the project has completed.
3- Project Baseline Bar stays good
Issue Environment"
- I have P6 V8.2 (stand alone) and P6 V8.0 (Enterprise) both on Win 7 and the issue appears in both.
- The issue appeared about halfway of the project progress.
- I've tried summarizing - but in vain
Look forward to seeing some interesting solution(s) from you.
Regards

Thanks ITPM
Creating a new layout from scratch did not help.
But something else happened that fixed the problem.
The issue disappeared as soon as I updated the schedule in question with an updated XER, as our usual fortnightly exercise. So, looks like the issue started and ended in the source database.
Now, when I stack the latest as well as 20 archived copies of project X sorted by finish dates, and all closed, in the project layout view, I see a nicely (uniformly) increasing blue colour, project after project, except the last fortnight's archive copy whose Gantt bar is corrupt - corrupt as described in the very first text of this thread.
I still don’t know why and shall keep thinking about and shall ask the source re their view(s). This is not a serious issue for me but, could be serious to those fellows who have their summary/tracking layouts accessible (or designed to be accessible) by their project staff.

Mask Shape to Path Issue

So, I'm probably doing something stupid, but here goes.
I imported a Null, and drew a shape with the pen tool. Then, I clicked mask shape and copied it. Finally, I pasted it on the Null's position.
So, what happens is that both the original mask shape and the path then shift in different directions, neither of which are where I originally drew the shape.
I tried this on when everything was 2D and when everything was 3D, but I can't get it to work right.
Any thoughts? Thanks.

Your work flow is fouled up because you are expecting to have the mask on a layer stay put while the layer position is changed.
Try drawing your mask path on a solid that is the same size as the comp and make sure that the scale is set to 100%. Then:
Set a single keyframe for the mask path by holding doen the Alt/Option key and pressing M
Copy that keyframe
Set a single keyframe for your null by selecting the null and pressing Alt/Option + m then paste.
The null should exactly follow the path on the solid layer.
Turning a mask path to a position path will not work properly if the layer is scaled. Using the keyframe trick insures that you will always have success converting a mask path to a position path.
If you copy a mask from a layer and then paste the path as position data on the same layer the mask position will change and the shape layer will move. This is normal behavior. If you want the mask path to stay in the same place in the comp you cannot move the layer without making adjustments in the Anchor Point. or use the Pan Behind tool. To make your workflow work you would have to keep the Null in the same position by adding the path data to the position and using an expression to invert the position data for the anchor point. This would defeat the movement of the null.

Tap picture in Photos App and rotate - issue / Pls help

Hello all,
Subject: iPhone 3Gs / 4.0.1
Application: Photos App (default Apple application)
Issue: tapping landscape pictures with phone in vertical position and rotate them goes on black screen
Description:
I am with iphone in normal (vertical position) and i go to photos app in order to scroll some pictures that were taken in landscape position.
Everything is normal. I double tap it in order to zoom it.
I rotate the phone in landscape position and the screen goes BLACK.
I rotate it in portrait mode and picture is back on screen.
Question: where is the problem ?
Tests results:
I tried to make several tests to identify the problem.
Before I want to say that i tried restore / reset / etc.
1. The pictures that are taken in portrait mode are not affected on double tap and rotate thing.
2. Works if you zoom manualy (not by double tap) and scroll to a corner of a landscape picture before you rotate the phone.
I add that any other application works fine on rotate / zoom / etc even photos app works OK if i dont double tap the picture before i rotate it.
Still after the tests i am not able to identify where is the problem so i ask the comunity if can help me to identify it.
thx in advance,

Is anyone with same model 3gs / 4.0.1 who can check if have same problem ?
Are only 4 steps:
1. Open Photo App with phone in vertical position
2. Select a landscape picture
3. Double tape it (will zoom automaticaly)
4. Rotate the phone in landscape position and write down the results.
thx guys for your help,

Tap picture in Photos App and rotate - issue

Hello all,
Subject: iPhone 3Gs / 4.0.1
Application: Photos App (default Apple application)
Issue: tapping landscape pictures with phone in vertical position and rotate them goes on black screen
Description:
I am with iphone in normal (vertical position) and i go to photos app in order to scroll some pictures.
Everything is normal. I double tap it in order to zoom it.
I rotate in landscape position and the screen goes BLACK.
I rotate it in portrait mode and picture is back on screen.
Question: where is the problem ?
Tests results:
I tried to make several tests to identify the problem.
Before I want to say that i tried restore / reset / etc.
1. The pictures that are taken in portrait mode are not affected on double tap and rotate thing.
2. Works if you zoom manualy (not by double tap) and scroll to a corner of a landscape picture before you rotate the phone.
I add that any other application works fine on rotate / zoom / etc even photos app works OK if i dont double tap the picture before i rotate it.
Still after the tests i am not able to identify where is the problem so i ask the comunity if can help me to identify it.
thx in advance,
Message was edited by: booog

Is anyone with same model 3gs / 4.0.1 who can check if have same problem ?
Are only 4 steps:
1. Open Photo App with phone in vertical position
2. Select a landscape picture
3. Double tape it (will zoom automaticaly)
4. Rotate the phone in landscape position and write down the results.
thx guys for your help,

How to make Nokia Suite remember the position and ...

how to make Nokia Suite remember the position and the size i set it?
because everytime i start it, it defaults in the middle of the screen and in the smallest possible size.
Nokia Suite 3.3.86
Windows Vista
Greece Nokia X6 RM-559 v40.0.002

Again, are you talking about genuine Nokia firmware, not any of some 3rd-party customised versions?
For officially released firmware, you may force Nokia Suite to reinstall even if your firmware is already up to date. This feature might be missed in its GUI as its link is "hidden" in the prompt message, not on a button or highlighted with underscore. Try Nokia Suite, once the phone is connected, click the icon of Software Update on the top, then click the word "reinstall" in the prompted message.
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.

IPhone 2G doesn't connect to the Internet over the O2 and edge network??

Hi people,
My iPhone won't connect to the Internet through the O2 and edge network, it used to work? Maybe an update has done something?? Any ideas to resolve my issue would be greatfully appreciated!! I have got software version 3.0 at the moment.
Regards
Carl

I would try a Reset first: Hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.

Storm 2 switched between edge and EDGE network.

I have an unlocked Storm 2 on the Fido network, it is a Verizon phone.
It seems to switch between the EDGE and edge network. I have tried all the different settings in the mbile network preferences and it doesn't help.
Does anyone else have the same issue?

I think I got an answer for this question.
The version number displayed is the one that was written to Active Directory at the time the Edge subscription was created. Because EdgeSync is a one way process, the version number does not update as you update the Edge Transport server to newer versions.
If you want the version number to reflect the current value, recreate the Edge subscription

Email only works on Wi-Fi and Edge, not on 3G

My husband and I both have the iPhone 4. We run different versions of iOS (6.1 and 6.1.3 ) We both use different email providers (I'm with Gmail, he is not) but neither of us can send or receive email via 3G, only via WiFi and Edge.
Our 3G is definitely working because we can use it to browse the web, run Pandora etc.
Things we've already tried:
- Close all apps and restart phone
- Change Fetch/Push settings
- Reset Network settings
Like I said, the only thing we have in common is the ATT data account, so it's not our email providers or iOS.

Update: The problem seems to have corrected itsself (after 5 days of dealing with the issue)

Mask position and edge issues

Similar Messages

Maybe you are looking for