Mask working great.... NOT

The mask works when I click play, but when "testing movie"
it's like it doesn't exist.
thanks

If you're masking text, you need to embed the font. If that's
not the issue,
you need to do as NedWebs said, and explain better.
Dave -
www.offroadfire.com
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

Similar Messages

Problem on ios 7.0.4 on iphone enable your mobile data uncheck to green (enambled) works great ring and shows who ringing may work on 4s and five not tested please try get back to me thanks

on iphone enable your mobile data uncheck to green (enambled) works great ring and shows who ringing may work on 4s and five not tested please try get back to me thanks

I'm sorry, but you are going to have to try a little better to explain your issue and what your question is, or post in your native language.

My IPhone 5 will not turn on, I had a new screen I stalled, all working great, the next day I was flying so turn off the phone and since trying to turn back in again,,, I receive many lines of white text stating incorrect shutdown please help

hhello, please help if you can,,,
i had a new screen installed, everything working fine, as was using the phone, the next day I was flying so turn off the phone in the usual way...
oon arrival turned the phone on, received a slow acting black background with the apple sign visual, but never moved from that......... So tried a reset still the same just left looking at the apple sing in the middle if the screen,makes it there for 5 mins but still never turn on completely,,,,,
again I tried,,,,,, again I tried a reset, then started to received lines of white writing, about 4-5 lines slowly like it was being typed, which stateed INCORRECT SHUTDOWN, ????????? then took out my MacBook air, to connect to ITunes to see whaypt I could do,
i tunes did not find the phone as would normally so opened ITunes manually, still did not find the Iphone,,,,,
Any Ideas please, as it is useless stuck in the drawer, I am an apple user, an quite knowledgable having other Iphine 5, IPad air and Mac,,,,, I am stuck,,,,
PLease Help,my hank you in advance

SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D

CUDA always works great on timeline playback but sometimes not at all on Export+MRQ enabled?

Hi,
I have Premiere CS 5.5.2 on Mac with Lion 10.7.2. System is Q6600, 8 GB DDR2, graphics is Nvidia GTX 560, 1 GB DDR5, 256 bit. AVCHD 1080i material exporting to PAL DV.
CUDA works great on timeline playback but SOMETIMES (3rd time in 3 months) when I export with MRQ enabled it simply does not kick in at all. Exporting times are high as exporting without CUDA, the graphics card's coolers don't speed up like they do when I play the timeline or when exporting with CUDA was working.
If I cancel the export CUDA works just like before when I play the timeline. If I go to export, again, it does not work. Very high export times. I click cancel again and it works fine playing the timeline, the coolers on the graphics card go slightly up as to indicate that th GPU is beeing used, everything is just fine. MRQ is always enabled and the project preferences are set to use CUDA.
Twice I solved this problem by closing EyeTV since I thought that this was the issue because maybe this program was using somehow the video acceleration and no more room was left for CUDA, but last time even this did not work. I closed EyeTV, restarted Premiere but nothing. Same problem, CUDA worked just fine playing the timeline WITH EyeTV running but not when exporting with MRQ. I had to restart the computer to get CUDA to work on export with MRQ enabled.
With CUDA: 30 minutes of AVCHD 1080i footage + logo applied and export with MRQ = 15 minutes exporting time to PAL DV.
Without CUDA or when CUDA does not work on export: 3 hours exportinng time to PAL DV.
For those who don't know EyeTV is a tv tuner application and I use it on DVB-C to monitor 2 national TV channels that are on the same digital multiplex. I opened up even 6 channels at the same time on the same multiplex and CUDA still worked fine on the timeline.
MRQ is always checked, always ON.
All I want to know if there is anyone else with this issue, wheter on Windows or Mac, their observations and what they tried to solve this issue.
Thanks a lot,
Best regards,
Dj Lyon

Taken from here: http://blogs.adobe.com/premiereprotraining/2010/10/scaling-in-premiere-pro-cs5.html
"Maximum Render Quality can still make a difference with CUDA-accelerated exports for any parts of the render that are processed on the CPU."

Just had an ipad and made a mistake on the password. Have now changed the password and everthing works great except facetime it will not accept the password. how can i change it please

Hi Just had an ipad for xmas and it worked great,but I wasn't sure of my password and guessed (should have waited till I got home), eventually I changed the password and left it over night.
Success I could now access my apple account, but could not gain access to the "Facetime", telling me to reset password or check internet connection all of which are working great. How can I get round this problem please.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Wrong pictures, no-shows, after editing... when running a preview or in full movie mode, iMOVIE does not show exactly the content as was provided in the project field. All files works great in iPHOTO.

Version: iMOVIE 11, 9.0.4
No new updates, 7 sept 2011.
Something is wrong with the project that I am working on.
When I add new pictures and movies, some of them will not be played in the preview or fullmode at all. Some pictures are wrongly understood by iMOVIE or there are some kind of weird errors or bugs in the program. I dont really know what the problem can be. All of the pictures and movies are imported from 2 cameras, Kodak and Canon, and they all work great in iPHOTO.
I also use tranistions, text, etc, to make the movie look good.
Here are some examples of the error, all of these picture where taken while running the preview movie. You can see the moment in the movie process by following the red line in the project field window.
1) Here you can see that it shows the wrong picture in the preview compared to the project field.
2) Here it shows the wrong picture and it also displays the wrong picture in an undesired strecthed mode.
3) Here are 2 examples of one picture that blocks the other pictures from beeing seen in the video.
What could be causing these stupid errors and bugz? Until this is solved I have stopped workoing on my movies and project, awaiting a fast fix.
Thank you!

Try this step:
Go to one of the problem points (or even all of the them in the Project Browser) and select it. Under the File Menu>Optimize>Large (960x540). See if will process the clips, still images and try playing it back again.
If Optimize>Large is grayed out, try pulling the clip out of the Project Browser, close iMovie. Open it up again and putting that clip back in its place. Then try to Preview it again and see if playsback properly.
Last thing to try is go to File Menu>Duplicate Project, quit iMovie. Open iMovie, go to the Duplicate Project and see if you get a working Preview from the Project Timeline.

HT201272 I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise? 2nd I purchased 21 new tunes yesterday on the new computer worked great but when I made a disc

I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise?
2nd > I purchased 21 new tunes yesterday on the new computer> worked great> but when I made a disc to transfer the playlist. I get the music but no album info just 1,2,3,etc. So I have signup both computers to share thinking that would work. But no to that also.
Please advise.
Thanks,
Bob

Copy the entire /Music/iTunes/ folder from old computer to new computer.
See this -> http://support.apple.com/kb/HT4527

I set up a location based reminder in notification last week to test it out. Worked great, but now I cannot get rid of it. It does not show up in any list on the notifications pages, but can be found in search. How can I get rid of this notification?

Last week I set up a location based reminder in notifications to test it out. Worked great. However, I can't get rid of it. It does not show up on any of the pages, either reminders or completed. I can search and find it, shows it should be in reminders page, but it is not there for me to remove. Any ideas?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Slideshow works great in "live view" but does not in "preview browser"

My slideshow looks just fine in "live view" but when I "preview in browser" it doesn't show up at all in Firefox and is a blue square with a question mark in Safari. This was created in Dreamweaver and the slideshow is "Advanced Random Images" from Dreamweaver Exchange.
It was working in the browsers, but I had to make some changes. I put the slideshow within the "content" to get it to be centered on the page.
The centering worked great, but now it's not showing up.
Here is that section of my code:
      
    </p>
    </div>
    
<div class="content">
<div id="slideShow" style="width: 600px; margin: 0 auto; padding-bottom: 15px;">
<script language="JavaScript">
// Advanced Random Images Start
// Copyright 2001-2006 All rights reserved, by Paul Davis - www.kaosweaver.com
var j,d="",l="",m="",p="",q="",z="",KW_ARI= new Array()
// KW_rs[5000]
KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/auditorium.jpg';
KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/boardrm.jpg';
KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/classroom.jpg';
KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/conference.jpg';
KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/conference2.jpg';
KW_ARI[KW_ARI.length]='/Gallery_images/slideshow/courtrm.jpg';
j=parseInt(Math.random()*KW_ARI.length);
j=(isNaN(j))?0:j;
    document.write("<img name='randomSlideShow' src='"+KW_ARI[j]+"'>");
function rndSlideShow(t,l) { // Random Slideshow by Kaosweaver
x=document.randomSlideShow; j=l; while (l==j) {
    j=parseInt(Math.random()*KW_ARI.length); j=(isNaN(j))?0:j; }
x.src=KW_ARI[j]; setTimeout("rndSlideShow("+t+","+j+")",t);
rndSlideShow(5000,0)
// Advanced Random Images End
    </script>
        </div>

<script language="JavaScript">
      </script>
Any suggestions?
Thanks!

I haven't uploaded the page since I made the code changes, for fear that if
they won't "preview in browser", they won't work live...
Here's the link:   www.epaaudio.com

I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?

I have an old ipod. It worked great until about 2 months ago and now it says I need to restore my ipod but I can't unless I format it, but everytime I try, it says the format could not be completed. Is there anything else I can do to get it to work again?

No app is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

I deleted and reinstalled HP Solution Center. It was working great and now it will not open.

HP Photosmart C8180. HP Solution Center
Windows Vista 64 bit
HP Solution Center will NOT OPEN
HP Photosmart Essential does open and works fine
I deleted and reinstalled from website Full Version of software to change from USB to Wireless connection,
Solution Center worked great using USB before this change.
Printer will print from MS Office and Web, but cannot open Solution Center to select Scan settings etc.

Hi there,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

HT201320 I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

I have IOS 7 5S and using mail. Receiving works great. Sending mail will not work. Using Centurylink. On my IOS 6 Iphone 4 it works great. Compared settings and they are identical. Now what?

Well, this is a recurring issue for many users...a small percentage of users but still a bug. Report the issue here to Apple: www.apple.com/feedback
iOS7.0.3 will be released next week, which as of now, I know is primarily for an iMessage but hopefully it will clear up some of these email issues some are also having.

Popup windows work great in IE but not in FireFox

I'm sorry if some of you helpful folks are tired of seeing my questions, but...
I have a page with thumbnails (which float correctly thanks to Altruistic Grandpa) and clicking on each thumbnail opens a new window with a larger version of the photo and some text. It works great in IE - the window opens and closes like it should - but in FireFox it creates a second browser window that has to be manually closed in order to return to the index page.
Any suggestions?
http://acemon.com/features.html
-Ace-

Thank you, Nancy.
Not only did that solve the FireFox problem, it also fixed a minor glitch when previewing in IE.
Every day I learn something new. I just wish I had more days.
-Ace-

[SOLVED][Bluetooth Headset] Speaker works great, microphone not :(

Hello everyone,
Thanks to this topic, I manage to have ALSA recognize my bluetooth headset correctly (originally I use it on my phone, works great).
My problem now is : the speaker part is working correctly (I can hear sounds coming from mplayer or aplay on test files) but I can't record any sound ! The only thing I can get is a noisy, continuous scratch sound when I try very basic commands like :
arecord -D btheadset -f S16_BE blah.wav
My .asoundrc file :
pcm.btheadset {
type plug
slave {
pcm {
type bluetooth
device 00:1D:82:B4:59:19
profile "auto"
hint {
show on
description "BT Headset"
ctl.btheadset {
type bluetooth
Is there any way to get that functionnal ? Am I doing something wrong ?
Thanks for your help.
Last edited by nsarko (2010-09-01 20:18:52)

I found myself on http://ubuntuforums.org/archive/index.p … 44715.html
Following your advice, I try this configuration :
pcm.bluetoothraw {
type bluetooth
pcm.bluetooth {
type plug
slave {
pcm bluetoothraw
and that does not the trick

Farmville game worked great on 3.6. Does not load completely on 4.0. Hate 4.0. How can I get 3.6 back?

farmville loads partially, but not completely. Only get 3/4 of the farm showing. resolution is at smallest setting. Worked great on version 3.6. I WANT 3.6 BACK!!!!!

I'm having the problem with Frontierville. It starts to load, then it disappears.

Mask working great.... NOT

Similar Messages

Maybe you are looking for