Masked color correction - new Pr Pro CC features or still use After Effects?

I am finally getting around to this project. I know in CS6 the solution was to use After Effects. I think I kept putting it off as I was not as familiar with that program as I am with PrPro.
Anyway this is the issue. I have 2 hours of old video I have captured that due to an internal camera malfunction (that was not discovered until the end of the tape)
that has 5 or 6 cyan tinted narrow horizontal transparent bars running through it. The image is there under the bars, it is just viewed through this cyan
tint. The rest of the image outside of the bars is fine and the image inside the bars is fine, it just has a tint. This is old SD footage.
An AE expert said I can make an Adjustment Layer in AE and use the Mask Shape Tool to draw several boxes around the problem cyan areas, apply the Curves and Hue/Saturation effect to the adjustment layer, then color correct. Some feathering would be needed (I know PS too so I can handle that part ) I think I recall back with PrProCS6, I could do this adjustment but only one bar at a time. I could be wrong about that.
But anyway, sounds pretty easy in AE. But since I live in PrPro CC 2014 now, and I saw some recent new features with masks and adjustments, I was wondering if I could perform the same adjustments right in Pr Pro CC 2014? If I need to use AE CC 2014, no worries, I have that installed.
Thanks for the help as always! This is family footage that I would really like to rescue.
BJBBJB1

Thanks so much Dave. It fixed the problem.
Raoul.

Similar Messages

Is the NVIDIA GeForce GT 750M in the new MacBook Pro supported by Adobe for Premiere & After Effects

As the title states.
Is it worth getting the 15" MacBook Pro with the Nvidia graphics card over the 15" version without for use with both Premiere Pro & After Effects CC?
Thanks

Chrisstockwell wrote:
As the title states.
Is it worth getting the 15" MacBook Pro with the Nvidia graphics card over the 15" version without for use with both Premiere Pro & After Effects CC?
Thanks
Unfortunately, I've found that many of the users here are PC users. While they are helpful, it's rare to get anything beyond guesses for Adobe Premiere CC performance on Macs.
I've noticed that the list of "supported" GPU's is not updated all that much by Adobe. It took a while after last year's macs were released for that list to be updated with those GPUs. But the 750M has 2GB VRAM and pretty much any GPU with 1GB of VRAM or more can take advantage of the Mercury Playback Engine on Premiere CC (http://blogs.adobe.com/premierepro/2013/06/adobe-premiere-pro-cc-and-gpu-support.html) With CS6, if your card isn't on the "list" you could add it using that hack that people talk about but you don't have to worry about that with CC as the above link explains.
While the regular 15" Macbook with the integrated graphics card is probably good enough to edit w/ Premiere CC, I don't think you'll be able to take advantage of any GPU acceleration because of the lack of a dedicated GPU with 1GB of VRAM. I am running Premiere CC on an iMac with an AMD GPU that isn't on the list, but does have 1GB of VRAM so I can take advantage of gpu accleration (however, while it's smoother than "software only", it definitely has it's REALLY annoying issues). I'm sure it'd be better with a newer NVIDIA card (from what I've read anyway) but like you, it's hard to get feedback from many people on these forums who use macs.
Hope this helps. I for one would go with the 750M. It's more $$$, but I'm guessing it'll be worth it. Just a guess though. I wish someone with that laptop (or even a 2013 iMac with similar GPU) would chime in with their thoughts.

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

Should I color correct in Premiere Pro or something else?

Hey guys, I'm an experienced noob in digital video production. I learned on using an HD camera and Final Cut Pro 7 in my communications class. But now that I graduated, I bought myself a t3i and the adobe creative cloud. My question is, should I color correct in Premiere Pro or another suitable program (the only one I sort of know is Davinci Resolve lite)? Sure, I know it can be done in Premiere Pro, but I was wondering if there is a better alternative that I should focus my learning in for color correction. Thanks in advance!

It will do you till you get there.
A comprehensive study of CC / Grading techniques and theory ...will do more good than just learning how to work a CC Grading software application.

I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers.

I am trying to import songs to my new macbook pro from my old computer using home sharing. Both computers say that home sharing is now on but neither show up in each other's library menu. I am logged on with the same apple id for both computers. and both are on a stable wireless connection

Logging into itunes store on each machine wth different Apple IDs is OK Autorising each others machines with the other Apple ID is OK. This is completley separate from Home Sharing
For Home Sharing to work you need to
File > Home Sharing > Create Home Share.
You need to select one of the two Apple IDs you are using and ENTER THIS ON BOTH MACHINES WHEN CREATING THE HOME SHARE.
Home sharing will then work

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer?

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer? Both computers have OS X10.9.3. Currently they are connected by a Firewire 800 cable.

You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
Matt

Hi! hooked up my new macbook pro to my LGE2442 monitor using a MDP to HDTV cable and the monitor resolution is terrible. suggestions? thanks!

hi! hooked up my new macbook pro to my LGE2442 monitor using a MDP to HDTV cable and the monitor resolution is terrible. suggestions? thanks!

thanks, guys mirror on/off didn't make a difference and there were no resolution options with the cable. switched to a VGA adaptor and all is working great now! cheers

Why does my entire computer freeze while opening or using After Effects or Premiere Pro CS5?

Just built a computer to meet all requirements for Adobe, Autodesk 3ds Max, and UDK, for school.
Specs;
Motherboard - ASRock X79 Extreme 4-M, Socket 2011 - Micro ATX - 4 DDR3 1600/1333/1066/800 - 3 PCI-E 3.0 x 16 - 7.1 CH HD Audio - PCIE GLAN - 3 SATA3 - eSATA3 - 4 SATA2 - 4 USB 3.0 - 10 USB 2.0
Processor - Intel Core i7 Processor - i7-3820 LGA 2011
Processor fan - Intel Thermal Solution RTS2011 AC
RAM - Ballistix by Crucial - 2x 8GB Tactical PC3 - 12800 CL8 1.5 VW/XMP = 16GB RAM
SSD - Crucial M4 SSD 128GB - Comptatibility with 6Gb/s & backward compatible with SATA 3Gb/s
HDD - Seagate Barracuda 1TB - 7200 RPM up to 32mb cache
Power Supply - Cooler Master Extreme Power Plus 700W
Graphics Card - EVGA - NVIDIA GeForce GTX480 - DirectX11 - CUDA - OpenCL Support - PhysX Technology - OpenGL 4.1 (so says the box it came in; but if I'm not mistaken I think the command prompt had shown OpenGL 3 or 3.2)
Disc Driver - LG DVD/CD RW... It is an OEM, Windows claims it is updated.
I use an external component - USB Microsoft Wireless Mouse & Keyboard 2000.
I have, as far as software goes...
Windows 7 64-bit SP1
Adobe Creative Suite 5, student version or what have you.
- I do have several plugins installed as well for After Effects only.
Autodesk 3ds Max 2012
-I have several maxscripts as well as a couple plugins for 3ds Max.
UDK 2-2012 & 3-2012
NVIDIA PhysX Lab 1.1
NVIDIA Texture Tools 2
NVIDIA plugin for Photoshop
xNormal
ConTEXT
UnCodeX
Quicktime
AVG Free
Malwarebytes
7-Zip
Java
Sculptris
As for anything else giving me issues I haven't noticed anything besides a previous Graphics Card wasn't supported very well at all with 3ds Max, it would freeze while using the material editor which was fixed with replacing a GTX550 ti with a more compatible GTX480. Thought maybe the upgrade would also solve the fact that almost everytime I go to start up and/or use After Effects or Premiere Pro CS5 my whole system freezes. Whether or not I'm doing anything, it occasionally happened during "Scrubbing" the timeline, but also during the splash load up screen. Would take the time to wait for several minutes but nothing would change. Hard reboot was needed. After countless hours of searching online I stumbled upon what is called an "Unlock" for Premiere Pro/After Effects to allow accelerated GPU and CUDA cores. Simple procedure, seems as if things go faster... When it is working. But still, I encounter freezes on my entire system. It isn't a crash back to Windows or anytihng. Just a complete freeze on the entire system. I have not extensively used other Adobe programs besides Photoshop quite briefly just so I could open menus and force a freeze within 5 minutes and noticed nothing wrong. Which in AE & PP just running through any of the menu windows can quickly cause a sudden freeze.
note* I have alternated shutting off and turning on OpenGL as well as multiprocessing. Doesn't matter, it really doesn't seem to change much of anything.
Alas, I am absolutely sure, after checking and re-checking 80+ hours over the past 2 weeks that yes, everything is updated as far as each individual program, software or hardware will allow me to update them. I have reinstalled Windows as well as each program up to 3 times, and 1 system (restore?) I had Windows dump everything, started from scratch, backed up nothing. To reinstall everything from scratch, while not installed several "Utilities" or software components from stuff like the Motherboard and its XFAST USB/LAN or whatever, thinking maybe it was cluttering up anything.
Please, if anyone has any ideas upon this and could give me advice, whether you notice any other incompatibilities or anything. Any and all advice would be greatly appreciated. Thank you.
note* I do not have a wired Keyboard or mouse to disable the USB plugin and attempt that route.. at least not yet, its on my list of things to do. Also, I did run Memtest86+ during a boot and it claims that everything there had passed 100%. I am not "overclocking" anything either. I just wanted something I could work smoothly on, that would have decent rendering capabilities. I used to use my girls' laptop which was an HP with 3GB RAM and never experienced crashes or freezes and I could use AE, PPro, 3ds Max with some lag but not any issues. Rendering took forever on it, but I usually avoided that 'cuz it would start heating up pretty fierce. Saved my rendering for school computers where I could. But either way, now I have this expensive piece and it is getting frustrating that I cannot work on it.
note* Also, incase it does help, I have Windows as well as any major components installed onto the C: drive (aka SSD for my system) while all my secondary software, such as Adobe, Autodesk, etc. are all installed directly to my D: drive (or HDD) And everything is set up to go through Windows Firewall as well.

Thanks all. I have just tried a few things, installing them onto the C drive as you all specified as not being one of them. I can understand it, but at the same time i have a classmate who has their software on a seperate drive and it runs smoothe. I'm on my second GPU in 2 weeks, unless I have terrible luck it seems doubtful being that I can run games and a majority of the software no problem. Through further testing around with a corded mouse and keyboard I've noticed the following...
The computer freezes entirely only when I'm performing a "scrubbing" action or using a mouse. Left clicking, scrolling, or moving it around. Otherwise if I do not use the mouse and I make all my actions, such as "scrubbing" in AE via "Page Up & Down" keys, there's no freeze and it preloads the preview no problem.
"Scrubbing" does not load a preview (the green bar doesn't load at all while scrubbing). But, also noticed no matter how smoothe everything is running in 3ds Max as well as PPro, once I start performing a "scrubbing" action with whatever timeline I use, it will definately freeze my whole computer, Windows and all. Hard reboot is neeed.
With having gone through 2 GPU's, done a full memtest via Windows 7 and Memtest86+, there seems to be no issue with my memory or GPU. Like I said, I've run UDK without an issue. Whether the editor or game. The USB doesn't seem like it's the cause, I've used both wireless as well as wired keyboards/mouse. Still freezes, but now only when using a mouse to "Scrub".
Is it possible my motherboard could be incompatible somewhere? I mean, really.. everything is brand new but 2 weeks of troubleshooting.
And I do plan on trying to run my software off the C drive, I just wanted to make sure it wasn't something else, like I said, I've seen and used a computer where it all runs off the D drive and it runs perfectly, actually better on his computer than off the C drive at my schools. So if it is an issue would it lie within the fact that I'm using an Nvidia GPU? Considering my classmate is using a AMD/ATI Radeon or something like that.
Again, to those who replied, your shared knowledge is greatly appreciated, thank you.

I just purchased a MacBookPro after having a MacBook. I have ILife, IWorks and Office for Mac. How do I get those programs on to my MacBook Pro? I will still use my MacBook at work so I need those programs to remain on it as well.

I just purchased a MacBookPro after having a MacBook. I have ILife, IWorks and Office for Mac. How do I get those programs on to my MacBook Pro? I will still use my MacBook at work so I need those programs to remain on it as well.

You need a Firewire cable to run between the two Macs. Using Utility>Migration Assistant running on your new MacBook Pro, transfer what you want (with all the preferences and such) from your MacBook to your MBP. Here's more info from Apple.
You might have an issue with the Serial number for Office, but hopefully you have that around.
Hope this helps.

Using after effects inside premiere pro

I have the cs3 production pack and word on the street is that it is user friendly between different programs, but I am having problems using after effects inside premiere -for example I am in premiere and have a clip on my time line that I want to add some glow or rain to -so I copy the clip and bring it into premiere and I am not able to past it even though I have a file set up -if somebody can shed some light on this for me it would be great -I can't seem to grasp the program interchangeable feature thanks

You will also find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

Premiere Pro cc 2014 do not import After Effects composition. Inside Premiere Pro CC 2014 is not possible call back After Effects, is not possible to work with After Effects. Thank you

You haven't given us much to go on here. What exactly are you doing and what exactly happens when you try? Which specific version of each program are you using? (Go to Help>About...)
On a side note, a simple, brief thread title is all that's needed. Something like "After Effects Issue" would be fine. You don't need the full question there.

Macbook Pro Crashing in the middle of After Effects render

Hey guys,
My 2012 Macbook Pro has now crashed twice in the past few weeks in the middle of doing a RAM preview render using After Effects. Prior to this, I was having major kernel panic issues with the computer crashing for no apparent reason, but those seemed to have been resolved once I removed a few specific kext files. I'm not sure if the current crashes are somehow related, but I do know that they have both happened in the midst of the same project file and the intensity of the renders is not that high (as in I don't have tons of layers and effects and things going on). Any suggestions would be greatly appreciated.
Macbook Pro late 2011
16GB RAM
OSX 10.9.5
Here's a copy of the crash report:
Anonymous UUID: 13B651EC-1735-9660-46E4-0E98E6F692B0
Mon Feb 23 16:22:48 2015
panic(cpu 2 caller 0xffffff8001cdcc1d): Kernel trap at 0xffffff8001ca5580, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0x000000030efdf000, CR3: 0x00000001109a105e, CR4: 0x00000000000606e0
RAX: 0xffefff800c147df0, RBX: 0xffffff8014c40da8, RCX: 0xffffff8011f51b18, RDX: 0xffffff80022d0b30
RSP: 0xffffff81e2bd3c90, RBP: 0xffffff81e2bd3cb0, RSI: 0x00000000ffffffff, RDI: 0xffffff8014c40da8
R8: 0x0000000000000001, R9: 0x00000000cccccccd, R10: 0xffffff80022d1600, R11: 0x000000000000019d
R12: 0xffffff800c093d60, R13: 0x0000000000000000, R14: 0x000000000000003d, R15: 0xffffff8014c40da8
RFL: 0x0000000000010287, RIP: 0xffffff8001ca5580, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000030efdf000, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff81e2bcddf0 : 0xffffff8001c23139
0xffffff81e2bcde70 : 0xffffff8001cdcc1d
0xffffff81e2bce040 : 0xffffff8001cf4486
0xffffff81e2bce060 : 0xffffff8001ca5580
0xffffff81e2bd3cb0 : 0xffffff8001c90768
0xffffff81e2bd3d60 : 0xffffff8001c960b3
0xffffff81e2bd3d90 : 0xffffff8001c8f81d
0xffffff81e2bd3dc0 : 0xffffff8001c8ea6c
0xffffff81e2bd3e00 : 0xffffff8001c7ea0c
0xffffff81e2bd3f10 : 0xffffff8001c82a4f
0xffffff81e2bd3f40 : 0xffffff8001c1d307
0xffffff81e2bd3f70 : 0xffffff8001cca13d
0xffffff81e2bd3fb0 : 0xffffff8001cf4ca6
BSD process name corresponding to current thread: After Effects
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Wed Dec 17 19:05:52 PST 2014; root:xnu-2422.115.10~1/RELEASE_X86_64
Kernel UUID: 45486BF2-BDDE-34CB-8C71-606FF3FE181B
Kernel slide: 0x0000000001a00000
Kernel text base: 0xffffff8001c00000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 47262543360456
last loaded kext at 31683529082398: com.blackmagic-design.desktopvideo.iokit.framebufferdriver 10.1 (addr 0xffffff7f84527000, size 20480)
last unloaded kext at 31875792964567: com.blackmagic-design.desktopvideo.iokit.framebufferdriver 10.1 (addr 0xffffff7f84527000, size 20480)
loaded kexts:
com.apple.filesystems.smbfs 2.0.3
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.34
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f4
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleHDA 2.6.3f4
com.apple.kext.AMDFramebuffer 1.2.4
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.AMDRadeonX3000 1.2.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleLPC 1.7.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f4
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.kext.AMD6000Controller 1.2.4
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.iokit.SCSITaskUserClient 3.6.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AppleSDXC 1.5.2
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.7f4
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOAcceleratorFamily 98.24
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f4
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.kext.AMDSupport 1.2.4
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.AppleSMC 3.1.8
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.7
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.2
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Unable to gather system configuration information.

Remove the "Blackmagic" software and see whether there's an improvment.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

Started to download Adobe Acrobat Pro. It's still downloading after 1.5 hrs??

Started to download Adobe Acrobat Pro. It's still downloading after 1.5 hrs??

terminate that download and restart.
if you have a recurrent problem, use a different (wired) connection and/or a different browser and/or a download manager.

My Macbook crashed yesterday, with After Effects on it. I bought a new one, but how can i re-install After Effects, without buying it again?

My Macbook crashed yesterday, with After Effects on it. I bought a new one, but how can i re-install After Effects, without buying it again? I logged in to my creative cloud-account, but i can't find the program or the order of the program in my history...

Download CS6 products
Contact support to reset activations. For anything beyond that we will need proper technical info - exact system, exact program versions and so on.
Mylenium

Use After Effects and Premiere Pro CS4 with Creative Cloud license

I have a one-year license for Creative Cloud, but because I have a 32-bit version of Windows 7, I can't use After Effects and Premiere Pro. On the website I read that for users with a 32bit OS it is possible to use AE and PP CS4 with the CC license. But I can't find a way to download CS4 with my Creative Cloud account. Can anybody help me with this? Is it possible to download CS4 with a CC license?

I have marked the remark in red. It says: "If you want to use the Windows XP supported After Effects or Adobe Premiere Pro, you have to download the CS-4-versions of the software with your Creative Cloud Membership. U can also use these versions with a 32-bit Windows Operating System."

Masked color correction - new Pr Pro CC features or still use After Effects?

Similar Messages

Maybe you are looking for