Masked elements not showing up at all

Hey,
I've been working on a site and on a couple of machines I've
seen it on the
elements I've used that include masks are totally invisible.
It looks right
on most machines.
I'm building it in Flash 8 for the Flash 7 player. All of the
machines it's
had the problem with are Macs, but that could be coincidence,
I'm not sure.
I have a feeling that it's due to the machines not having the
correct Flash
player. However, one of these machines is where I work and
all the software
runs through a network, it seems that all machines there
should have the
same Flash player. It works right on all the other machines
at work that
I've seen it on.
Is there anything else that could be causing this problem?
Thanks for your help.
--KB

Hi there meganreel,
You may find the information in the article below helpful.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
-Griff W.

Similar Messages

HT4759 change do not show up on all my divices like contacts

change do not show up on all my divices like contacts

Are you saying that changes to your contacts are not syncing to your other devices? If so, you need to make sure that the contacts you are changing belong to the iCloud account. To do this, open the contacts app on your device and tap Groups. Do you have any non-iCloud accounts listed, such as On My iPhone, Gmail, Yahoo or an exchange account?
Also go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section). Do you have the Default Account setting there, and if so, what is selected as your default account.

Why is my website not showing up AT ALL in Google?

I uploaded my website at the beginning of this week and it's working OK, but not showing up at all in Google. It is not so much an SEO question, because even if I google the exact website, it still doesn't show.
I have no idea what I did wrong, but I assume it's a meta data issue. What should I have filled out in the HTML for <head> box? It's blank now.
Thanks!!!

You didn't do anything wrong most likely. It takes time to get indexed. Could be months depending on how your site is optimized, your content and traffic you generate to it.

Accordion not showing up at all in IE6

I have a standard accordion set up at
www.taradeal.com/pow.html
and it works fine in Safari and Firefox, but does not show up at
all in IE6 (the initial load of the text bits flashes up, but the
Spry re-work of the code seem to fail). I'm using Spry 1.6.1,
freshly updated for DW CS3.
The accordion display a standard RSS XML.
Here's some code:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN">
<html>
<head>
<meta content="text/html; charset=iso-8859-1"
http-equiv="Content-Type">
<link rel="alternate" type="application/rss+xml"
title="RSS" href="pow-rss.xml">
<script src="SpryAssets-xpath.js"
type="text/javascript"></script>
<script src="SpryAssets-SpryData.js"
type="text/javascript"></script>
<script src="SpryAssets-SpryAccordion.js"
type="text/javascript"></script>
<script type="text/javascript">

</script>
<link href="SpryAssets-SpryAccordion.css" rel="stylesheet"
type="text/css">
</head>
<body>
... some table code
<div id="poems" spry:region="powrss" align="left">
<div id="Accordion1" class="Accordion" tabindex="0" >
<div class="AccordionPanel" spry:repeat="powrss">
<div class="AccordionPanelTab">{title}</div>
<div
class="AccordionPanelContent">{description}</div>
</div>
</div>
<script type="text/javascript">

</script>
</div>
...some more simple display, and a Google tracker
</body>
</html>
Thanks for any pointers on what's wrong.
-dan

Well, it seems to be a bug in the handling of the XML file
contents. I fixed it by changing the code in SpryData.js to force a
"manual" parse of the XML code. Not a good solution, but I don't
know the codebase well enough to find the root of the problem. I
know that the firstChild.nodeValue is "Object required" but I can't
figure out who sets that and why. Maybe no ActiveX object?
http://www.taradeal.com/pow2.html
still broken in IE6 if you want to check it
http://www.taradeal.com/pow.html
uses changed code and dynamic-data accordion works
Spry.Data.XMLDataSet.prototype.xhRequestProcessor =
function(xhRequest)
// XMLDataSet uses the responseXML from the xhRequest
var resp = xhRequest.responseXML;
var manualParseRequired = true; /*** DC for IE6 **/

Some Devices are not showing up at all in the Discovery reports

Hi all,
The first time I ran the CS device discovery I got 50 reachable devices. I scheduled the Device Discovery to be run every week. I added more subnets to the discovery but unfortunately the last discovery shows only 31 devices from the first discovered devices (50). I checked the DCR and there is only 44 devices out of the 50!
My question is:
Should not the scheduled Device Discovery discovers all devices -the previously discovered ones and the new ones-?
Why the rest of the devices are not showing up at all in the discovery reports (neither reachable nor unreachable) although all of them are pingable and responding to the snmpwalk tool from the CWLMS server.
Your kindly respond is highly appreciated.
Thanks in advance.

I ran the discovery again with the same settings after enabling debugging and I checked the following log files:
1. in the ngdiscovery.log I found a lot of errors all about Duplicate IpAddress example:
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-06 addNewDevice] : Duplicate IpAddress (127.0.0.51) found in addNewDevice().Device 1 ip = 10.8.113.29 , id1 = 127.0.0.51*F1COR.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.106 , id2 = 127.0.0.51*LCD.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-08 updateDevice] : Duplicate IpAddress (127.0.0.51) found in updateDevice().Device 1 ip = 10.8.113.93 , id1 = 127.0.0.51*UDS.xyz.com*.1.3.6.1.4.1.9.1.283, Device 2 ip = 10.8.113.73 , id2 = 127.0.0.51*F2COR.xyz.com*.1.3.6.1.4.1.9.1.283
ERROR [DeviceManager : EvalTask-DiscoveryThreadPool-09 addNewDevice] : Duplicate IpAddress (10.8.113.42) found in addNewDevice().Device 1 ip = 10.8.113.42 , id1 = null, Device 2 ip = 10.8.113.86 , id2 = 10.8.118.251*OPS.xyz.sa*.1.3.6.1.4.1.9.1.501
2. in the CSDiscovery.log:
Error while changing the permission of the file C:\PROGRA~1\CSCOpx\objects\csdiscovery\1348\DiscoveryStatusObj
I checked the file and the casusers has a Modify permission
My Question is:
1. what is the meaning of those output exactly?
2. If CWLMS found duplicatedd IP address how it works in terms of (ignoring, updating existing devices, Adding the new devices, ... etc)
Many thanks for your help.

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

Calculate result as average in the report not showing average for all

Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
Vijaya

SAP note solved the purpose.
Thanks & Regards,
Vijaya

The default wallpapers are not showing up. All I see is a black screen. How do I get back default wallpapers?

Hello,
I have a problem with my iPhone. The default wallpapers are not showing up. All I see is a black screen. Can someone tell me what has to be done?

Go to the Home screen with one press of the home button. Then double press the Home button. When the Dock raises, tap and hold one of the app icons untill they all start jiggling and a red X appears. Tap the red X on the video app to quit the app.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

When I select a title or lower thirds and try to enter text by double clicking on it I cannot enter any text at all. Also the text area box does not show up at all where you can enter text also.

It's a bit hit and miss, Walter. Sometimes the box to enter text shows up straight away in the inspector under "text". Other times, although you click "text" in the inspector, there's nowhere to actually write anything.... then what you have to do is move the trackbar over the Title Box until you see the text boxes in the main Viewer. In the Viewer, double click a text box.... you can enter text there, but it's a bit flaky, but when you've clicked in it, you'll find that under "Text" in the inspector, the box for inputting text has magically appeared!
I'm not sure if anyone else has this trouble, but it is a bit of a pain!

Master Page elements not showing up on top...

I'm newer to ID and the industry in general...with no prior experience. Running CS6 on Windows 8.1. I have existing documents that were shared with me where the master page elements always appear on top, meaning on top of pages or items placed in a document. Those items are surrounded by a red dotted line, and I cannot edit those in any way, shape or form. I am working in a new document and all my master page elements have a blue dotted line and do not show up on top of anything no matter what I do and the option to Arrange isn't there. I know I must be missing a really simple step, but in all of the videos and tutorials I've read and watched, this has never been addressed. What am I missing? See images below (added the green box to show an item on the page showing up on top of the master page stuff.) Thank you in advance for any help you can offer.

The color is derived from the color code for the layer. You’ll need to go to the master page to edit the items.
If you that new to ID none of this is intuitive. First, I recommend that you buy Sandee Cohen’s Visual Quick Start Guide. It’s the be beginner book on the market: http://amzn.to/14JHq54
You may also benefit from some quality time on Lynda.com. This link will get you a one week free trial: http://lynda.com/trial/BobLevine

Flash Elements Not Showing

I have used DW 8 for a while and after I downloaded the
newest update of dreamweaver my flash elements will not show up in
a web browser. I have a few buttons and a flash movie. They show up
like they should in design mode, but when I go to preview them in
by pushing F12 they will not show up. They also won't show up when
i upload them to my web host.

> It didn't do this on a previous website though
That's because Microsoft hadn't patched IE at that time. Go
back to that
site now in IE6 and you'll see that you have to click twice
on the Flash to
use it. DW8.0.2 fixes that....
> where to and how
Select it in the local site, and PUT it. DW will take care of
the rest.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"TSAaddict" <[email protected]> wrote in
message
news:er04t9$ih5$[email protected]..
> This is going to make me sound stupid but where to and
how. I still don't
> know
> all of the things about DW. , but
> that was about a year ago and there have been new
updates.
>

"FFB" Problem -Elements Not Showing

I'm creating a site using the "Full Browser Method."
I've gone through the forum & google before posting. I've
also done Lee's tutorial at GoToLearn. It's great for tiling
backgrounds.
1.) What's the standard size for "FFB" I'm currently using
1280x800. I'm using a image for my background what size should that
be?
2.) I've gotten my background to fill the browser but a lot
of my elements are getting clipped. For example I drew a bar a the
bottom of my stage and typed some text. When I go to publish the
.html it doesn't show it gets clipped.
3. My main objective is to load my "bg.swf" at level 0 using
the "FFB" method, then my "content.swf" at level 1 and my
"navigation.swf" at level 2. Do I need to have all my other "swf's
be published with the "FFB" method or justt my main flash movie
which is my "navigation.swf" How can I accomplish this. What will I
need to do and where shall I place my actions scripts?
I'm on a MAC intel using Flash 8 Pro. I have a basic
understanding of AS2
3.)

bev4515 wrote:
> I apologize if this is a repeated question, but I am so
frustrated. I was
> working on an existing website, that was working fine
until I made a few
> updates. The updates were made after I downloaded and
installed the dreamweaver
> 8.2 update. That's the only variation that I can think
of. I was simply adding
> 2 new flash elements to the page. One is a slideshow. On
one of the pages, the
> buttons were not even showing (which I also embedded
with dreamweaver, I
> created them in flash). This site has been up for 6
months and I have never had
> a problem making changes for the client. I can see the
changes when I preview
> them locally, but when the pages are uploaded, the swf's
are not showing on the
> page. If anyone can help, I would be forever greatful.
When you insert Flash into a page using DW 8.2 it now creates
a
'scripts' file in your local site folder. You have to upload
that
'scripts' folder to your server, otherwise the Flash will not
work.

Loops not showing up at all in Garageband.. but are on computer...

Hey,
My loops are not showing up... however I don't have my CDs with me at Uni. However, I disovered by using Spotlight that the loops are actually on the computer in a folder called "Apple Loops for Garageband". They are in my user library and the garage band preferences are set to "share loops with this user only" or whatever the option is called - suggesting that it is correct for this folder to be in the User libray and not the main library.
However I don't even have grayed out samples - they just are not there at all.
I tried dragging one or two from the folder to Garageband manually and they copied over fine and are now in the sample library... however it won't let me copy them over all in one go for some reason...??
I have a lot of samples so don't want to do them one by one... so before I resort to that - any advice...?? Whats going on?
Thanks in advance.

hey, yea i've been having the same problem, just bought this new imac, and none of the audio loops are working (they all show up gray). i actully spent the time, clicking and draging each one individually, but guess what? not all the loops are there!!! i'm sooo cofused, if anyone has figured this out, that would be extremely helpful thanks!!!!

IPod not showing up at all on Mac but works fine on Windows?

I've been searching for an answer on these discussion boards for hours and have not yet found any situation that was quite like mine and I'm getting a bit frazzled and worried.
I have a 120GB iPod classic, which I've used for two years with an ACER laptop and it works perfectly. Two months ago, I switched to a Macbook Pro and synced my iPod with it; again everything worked fine. My iPod was synced with the Mac and all the new music had been transferred.
Today, I've been trying to connect my iPod to my Mac but nothing happens. It only charges (and I can't even be sure that it IS charging because the charging green sign does not show up on the iPod). It does not show up in Finder, or in the iTunes source list; it does not sync. I've reset it a billion times, restarted my mac, switched USB cords and USB ports, even downloaded and installed every software update imaginable but nothing is working.
If I leave the iPod connected to the Mac for a while, something even more alarming happens. It connects for around 3 seconds, and then ejects itself repeatedly. It's like watching someone go insane.
Naturally, I freaked out and tried to connect the iPod to a PC and it is working perfectly on the PC. Please, someone help. I have no idea what's going on.

Did you download and install the latest version of ITunes over the existing installation?
http://www.apple.com/itunes/download/
Be sure to try everything else mentioned in this article.
iPod not recognized in iTunes and Mac desktop
What if you connect the iPod in Disk Mode?
Putting iPod into Disk Mode
If the iPod is recognized okay on the PC, try restoring it there and then reconnecting it to your own laptop.
B-rock

Does the Ipod Classic 120 GB still connect to itunes? Because mine will not show up at all in itunes!

My Ipod classic will not show up in itunes at all but it says its charging and that it is connected to the computer! I have my itunes updated fully and it still does not work! So i am thinking that maybe its not able to connect anymore because of the new usb connecters or the version of itunes! But i dont know so i really hope i can get this resolved!

Hello Riio312,
I would be concerned too if my iPod was not recognized by iTunes. I found a couple of articles that might help with this.
If you don't see your iPod in the My Computer section of Windows, follow the steps in this article:
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
If Windows recognizes your iPod but iTunes does not, follow the steps in this article:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Masked elements not showing up at all

Similar Messages

Maybe you are looking for