Masked layer won't resize proportionally

I have this layer mask. and when I try to resize it with free transform, the image got screwed up, like the image is thin and tall, even though I'm pressing the shift key,
the layer is resized proportionally, but as I said it was distorted first. before you can make an adjustment

now I see what's the problem.
the version I was using is the release which is updated last 2011.
after I tried this beta release (march 2012)
this bug is now fixed.

Similar Messages

Problem when pre-composing masked layer

Ok, i am having a problem when masking a Twixtored layer.
this is what happens:
i have the original footage in a comp, i used twixtor to slow it down to 3% speed
Seen here: http://prntscr.com/zbicc
I Then pre composed that slowed down layer into a comp of it's own and masked around that parts i wanted and named this comp "masked comp 1"
Seen here: http://prntscr.com/zbitw
and here: http://prntscr.com/zbiyc
i then precomposed the masked layer into another comp called "sky replacement" and this is when i hit the problem, it dosn't show up, it just gives me a black screen.
Seen here: http://prntscr.com/zbj9n
and here: http://prntscr.com/zbjcn
I tried rendering out "Masked comp 1" and "sky replacement" and with both it just renders a black screen, but if i render the Twixtored comp that renders fine. So i think it has somthing to do with the mask but i can't figure it out.
Please help.

The black screen notwithstanding, I see two VERY big problems in the workflow as described... or at least as how I understand your workflow.
You used Twixtor to slow down video to 3% of its normal speed: that represents tons and tons of speed redeuction, and you're lucky that Twixtor was able to give you a useful image AT ALL. Then you precomped it, too boot.
Then you hoped against all hope that you could effectively mask the precomp... which was presumably at the target frame rate.
Give yourself a fighting chance to come up with something: once you use Twxtor, prerender it. And I have to tell you: if you are actually using Twixtor to slow down footage to 3% of normal speed, it probably won't look good. Twixtor is great for minor speed variations, but for 3% of normal? It can't work miracles......

My homescreen won't resize and I can't access anything because everything is too big to navigate. Help.

My homescreen won't resize and I can't access anything because everything is too big to navigate. Help.

Double-tap the screen with three fingers to disable Zoom.
To turn off Zoom go to Settings > General > Accessibility > Zoom and turn this Off.

Disk Utility won't resize a partition

Disk Utility won't resize (eliminate smaller partition from a 2-partitioned internal) Hard Drive. This is the message I get:
"Partition failed
Partition failed with the error:
Filesystem resize support required, such as HFS+ with Journaling enabled."
Help files offer no information on this error. I followed the Help instructions to do this operation, but the resize doesn't work. The older, smaller partition shows up in Disk Utility but is dimmed out. It will activate at highlight, but is not recognized on the desktop.
Any suggestions as to how to fix this problem?

Intel based Macs use a different partition scheme called GPL or GUID rather than what PowerPC used, APL.
You could try reformatting, or get a new system, and run BootCamp and Windows even.
Even if you've used Macs for years, there is always a place on my book shelf for this one, David Pogue's "Mac OS X: The Missing Manual (Leopard Edition)"
http://books.slashdot.org/books/08/02/27/1551206.shtml

Adobe camera raw window won't resize and can't reach buttons

When I open an image from bridge into adobe camera raw 6.1 (Photoshop CS5) on my laptop, the camera raw window fills all of the screen (top to bottom) and the buttons at the bottom of the window are below the task bar. Thus I can't open the image in photoshop except by hitting the enter key. I can't reach the open, etc buttons. The window won't resize and there are no icon/buttons in the right upper corner to go to/from full screen. When I hit the icon in the top right hand menu bar in ACR (to go to full screen size) the window then fills the whole width of the screen in addition to the height, but no matter what I do I can't get the height of the window to shrink, so that I can access the icons at the bottom of the screen. What am I missing? Thanks

Don't worry about turning aero off just yet.
There are two key first questions:
What is your screen resolution (width in pixels x height in pixels)? Right-click on desktop, choose Screen Resolution.
What setting have you chosen for the display size (Smaller, Medium, Larger) in the Display dialog? Right-click on desktop, choose Personalize, then Display.
-Noel

Can a masking layer have more than one mask?

I have a mask layer with a rectangular mask in it.
Inder this layer I and a nasked layer with an object to be
masked on it
This works fine
When I all another object to be masked in thesame layer and
relevant mask in
the same masking layer the sacond object does not show up at
all.
Does this mean that the masking layer can only have one mask?

aa wrote:
> I have a mask layer with a rectangular mask in it.
> Inder this layer I and a nasked layer with an object to
be masked on it
> This works fine
> When I all another object to be masked in thesame layer
and relevant mask in
> the same masking layer the sacond object does not show
up at all.
>
> Does this mean that the masking layer can only have one
mask?
One mask per layer, tho the mask could be made of movie clip
which could
have a mask within.
Best Regards
Urami
Beauty is in the eye of the beer holder...
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Mask Layer not working in cropping to stage Flash

I've read through umpteen Flash threads of frustrated users who export SWF and anything visible outside the stage appears in the SWF when opened in a browser. None of the solutions have worked for me. My file is called statement_onlineheader.fla. It can be seen here http://www.mediafire.com/?yrmgnoynihw. Anyone know why this does not work for me?
I have my mask layer above a folder containing all other layers. I have also tried moving the mask layer above individual layers. Same result. Stuff outside the stage appears in the exported SWF.

Very true. So what do you think is wrong with my file? The top layer is marked "Mask" when I control-click it, and it doesn't matter if I put it over an individual layer or not. The top layer is a rectangle the size of the stage, yet this layer (which is checked as a mask) does not mask what is below it.

Mask Layer

Is there any Way to creat mask layer, to Cut Out somthing in a picture? With Color Black to delete and white to restore the Pixel like photoshop for Windows????

Sorry, there is no layer mask support in PS Touch yet.

Blogger (blogspot) mobile site won't resize images

Blogger has supported mobile version webview. When using Firefox android browsing blogger, the images are not resize to smaller ones.
As image below:
http://imgur.com/WWdDFLE
Firefox for android, the image won't resize to smaller one, but other browsers do.

This is likely a problem with the data blogger sends to Firefox. You can log a bug report at https://webcompat.com/ and technical people will do some diagnosis of the issue.

Mask layer not in Layers tab

I have sent a video clips from my FCP timeline to Motion and added a Circle Mask to it. But somehow my hand slipped and I hit a key.... because now I do not see the mask layer in the Layers tab. And I need to attach a Match Move behavior to it.
I can see that the mask is still there (it is present on the Timeline).
What did I do to seemingly toggle off its presence in the Layers tab?
Thanks

sure enough...
Thanks.

Mask layer not visible in layers palete

I have a strange problem, when I apply any kind of mask to a layer in motion 3, the mask icon shows up on the layer to which it was applied in the layers palette, but the mask layer does not show up underneath the layer to which it was applied, thus i can't select the mask to adjust the controls of the mask, I can only toggle it on and off,
I would assume this is a simple user error, but for the life of me I can't find a "show mask layer" setting anywhere,
any insight on this problem would be hugely appreciated.

the disclosure triangle for the entire group is twiddled, showing my layers and any added effects, but for some reason the only thing that shows the presence of a mask is the small square icon on the video layer, but as there is not layer beneath the video layer to click on to adjust mask controls... i have been watching m3 tutorials and the mask always creates a layer in the palette when activated, but for some reason it's not with mine...
???

Trouble using mask layer?

I have trouble using the mask layer. It doesn't seem to be blocking out extra grid marks. I am doing something wrong? Thanks
SIDENOTE:
The grid was imported from illustator into flash. It causing flash cs5 to be extremely buggy. The layer I import itself relabel itself, it either "1" or "2" The grid layer when I place it on lock, doesn't lock! The grid will also cut and paste itself onto a new layer, automatically sometimes.

It would easier if you use the brush tool to paint on the layer mask.
Paint with black to reveal the color and white to hide the color of the layer below.
You can use the X key to switch between black and white as the foreground color in the tool box.

Photoshop Mask Layer, see through multiple layers.

Dear All -
I am a new learner to Photoshop and working on Layers and Layer Mask to obtain see through multiple Layers effect.
Below is the description of my problem that I am looking forward towards resolution in this forum. I will be glad if some expert can guide me on this.
I have three layers of different colors as below.
Layer 1topmost layer) with Red color filled rectangle.
Layer 2(below Layer 1) with Green color filled rectangle.
Layer 3(bottom most layer, below Layer 2) with Blue color filled rectangle.
When I erase something with brush on Layer 1 using masking Layer 1, it hollows the erased part and start showing the Green color of Layer 2 in hollow section of Layer 1.
What I want to achieve is that, when I erase Layer 1 using layer mask, then it should hollow Layer 1 as well as Layer 2 and should show Blue color in the hollow section of Layer 1.
i.e: Hollow section made on Layer 1(using Layer Mask on Layer 1) should also be applied on Layer 2 so that Layer 1 and Layer 2 becomes hollow using eraser and I should see through Layer 1 and Layer 2 and Blue color of Layer 3 should be visible from the hollow section.
Though I can do this by Flattening Layer 1 and Layer 2 together so that it forms one single Image, and then when I hollow this Flattened image using Layer Mask, then it will show me Blue color. But I do not want to do this, as I would lose the flexibility to unhollow/recover the hollow region on both Layer 1 and Layer 2 independently in the future.
Thank You,
Saurabh Khanna.

Here's a sample of copying the layer mask onto layer 2 using a hard cutout.
Here's the same thing using a soft feather cutout.

GarageBand window won't resize

Garage Band window won't resize...I can see the bottom but not the top..if I do anything to it, I lose the bottom completely and have to start from scratch.

something quick to try; assuming you are already at your highest resolution, toggle it to a lower rez and then back to the higher rez.

For some reason the masking layer is not working in my CS6. I know I have all the settings correct!

For some reason the masking layer is not working in my CS6. I know have everything set correctly! Please help.

Hard to guess on this type of question at you are not offering any tip on what you are doing. A screen shot might help to see how you have things set.

Masked layer won't resize proportionally

Similar Messages

Maybe you are looking for