Masking not displaying correctly

Recently upgraded system to 9.1.2. I have a couple dozen phones when dialing an outside line there phone masking is not displaying. The masking is showing up with the Bill To Number of the PRI's. I have had numerous Cisco TAC show me and tell me that when calls leaving the gateways they are leaving with all digits, and when the same call enters our gateways they are being changed to this BTN. However this literally happens every other call. The first call will show all correct 10 digit masking and the second call with have the BTN.
I spent weeks with Verizon and they added these numbers to a switch screening table so they can identify the numbers correctly coming in. After weeks waiting for them to make these changes it still does NOT work. Please any suggestions at all will help. Im at a loss in what to do. I can not find this phantom number anywhere and to the best of my knowledge this masking number that shows up is just the BTN of our PRI's.

Do you have multiple PRIs? Maybe the route list is configured for a different hunting algorithm and sending calls out a different PRI? Can you run debug isdn q931 on the gateway you think calls are going out on and see if both the calls that have the right and wrong masks go out the same gateway and you are seeing the masks correctly. If you are seeing the correct masks on both calls, then its a provider issue.

Similar Messages

Photoshop TIFFs with layer masks do not display correctly

I am sure other people must have this problem, but I cannot find any related posts so here goes:
I open an image using the "open in external editor" command (typically a RAW file converted to a TIFF), edit in Photoshop and save the file (as a TIFF, I do not use PSD format)
If the PS edit contains any layer masks or alpha channels (masks in the channel pallet) it does not display correctly when it reappears in Aperture. Only the top most mask will display, assuming I have multiple layer masks in the PS edit.
Not only will the TIFF only appear as the mask in Aperture, but Aperture will print or email the mask, not the PS edited file as it should appear.
It seems that Aperture only recognizes the layer mask (or alpha channel mask) as the image, and all the other layers etc are disregarded.
Is this a confirmed bug, or is there some setting I have not correctly configured or some other issue?
I love Aperture, but this problem is nearly a deal-breaker for my workflow, and would be for any serious photoshop user, I would imagine!
I cannot believe this is still a problem in version 1.5, which is the version I am using (thus my system is 10.4.8)

David,
I assume you mean in the edited PS TIFF file:
In different cases I have either:
A. A TIFF file with layer a layer mask
B. A TIFF file with multiple layer masks
C. A TIFF file with an alpha channel mask
D. A TIFF file with multiple alpha channel masks
E. A TIFF file with any combination of the above
the outcome is the same, they all do not display correctly in Aperture. It does not seem to matter if the file was opened in PS from Aperture via the open with external editor command or if it was worked on outside Aperture entirely then imported. I do have maximize compatibility in PS checked (though I understand this is only for PSD files, though perhaps I am wrong here)
any thoughts?

Umlauts are not displayed correctly in different programs

Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)

Did you check the locale settings on your Windows machine?

Date can not display correctly in excel from .jsp

Hi,
I create a .jsp report to export the data to excel. the report run OK, except the date field can not display correctly.
for example in database :start date ='01-oct-2003'
in the except it displays to 02/06/02.
It seem all the date field can not be control in the report, and control by somthing else
Doese anyone come accross this problem?
Thanks

Hi Rong,
Are you using the following demonstration to build your JSP?
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/index.html
(Output to Excel with Oracle9i Report)
I tried to do the same, and inserted a database date field in the JSP using Reports. I found the following:
While making the template inside Excel, if I make sure that the format of the date cells is "Date" - some particular date format, the date field values from Reports does not get exported correctly.
However, if you make sure that inside the template, the format of the date cells is not date, but "General", then the date field values are correctly exported to Excel.
Pl try it and let us know.
Navneet.

BPS_WB: Please Wait Dialog Box not Displaying correctly???

When we switched our Planning Interfaces to using the New Planning Interface Design the Please Wiat Dialog Box does not display correctly.
When a Request is fired and the client is waiting for the Response all that shows is a white block in the middle of the screen with no dialog screen or other information.
It maybe associated with the following:
function bpsOpenURLSelf(doIt, url)
      if (doIt) {
        try {
            document.body.style.cursor = "wait"; // works only in IE
        } catch (ex) {} // ignore
        open(url,'_self');
      // note: function with doIt==false is used to check
      //       existence of the opener window
Or it may be associated with a CSS issue?
I am currently using IE 6.0.2900.2180.
Any thoughts would be appreciated!
Thanks, ATC

Hi Alan,
please implement SAP note 845305.
Regards
Marc
SAP NetWeaver RIG

Search box not displaying correctly in Safari

How can the search bar on the Apple site not display correctly in Safari? I find this odd that Apple would allow this. It displays like 2 search boxes overlapping each other. It still functions correctly but it is a little embarrassing since I am always bashing windows pro browser display.

Hi
Welcome to Apple Discussions
Might be a corrupted cache or cookies issue. First, go to Safari Preferences>Security>Show Cookies. Type Apple in the Spotlight panel. Highlight/remove the cookies. Then, go to the Safari Menu>Empty Cache. Try the Apple site.
If the double search panel still appears, go to the Finder: Your User Account>Library>Caches. There, move to the trash the com.apple.safari file. Restart Safari and try the Apple site again.
Post back

Why is Times New Roman not displaying correctly in Illustrator CS5?

Alright, so I'm running Windows 7 64-bit and Illustrator CS5.
Times New Roman Regular does not display correctly on my machine when using Illustrator CS5, but Bold, Italic, Italic Bold display just fine. Times New Roman does display correctly in every other program I use. InDesign, Word, etc. I've attached a screenshot to show what I mean. Please help!

Hi,
I have an absolutely same bug - looks like font substitute
I had reinstall font family - no changes. Win 8.1 Illustrator CC.

Report does not display correctly when exported to adobe

Post Author: mgisonda
CA Forum: Crystal Reports
Hopefully someone can help me. I am currently running Crystal Reports profession version 10. I have applied service pack 1 and recently service pack 6. I am having a problem with the display of a report within adobe. My report is a bit complex. It is a 8.5x11 one page landscape report. It is set up in a grid format with multiple lines and boxes drawn on it. Here is the report information: Report Definition----
Number of Database Fields: 144 Number of On-Demand Formulas: 40 UFLs in use: None Page N of M Used: No File Format Schema: 10.2.0 I created the report using CR developer. I use the report within a web project. The user requests the report and it returns to the user, an adobe file of the report. However, this is where I am having trouble. On my local development machine, the report displays fine. In CR developer, the report displays fine. When I export the report to Adobe from the CR Developer, it exports fine. BUT when I run the report from my web site, the adobe file that is returned is broken up over 42 pages. What seems to be actually happening is the return adobe file seems to think that the page size is 2in X 4in.. Where it got that, I don't know.The server running IIS is a windows server 2003. It has adobe 8.0 reader on it. I also have Crystal 10 Server Distribution loaded on it. And I have loaded CR10 Service pack 6 on that as well. Below is the web code that is used to display the report:Imports CrystalDecisions.Shared'Imports CrystalDecisions.CrystalReportsImports CrystalDecisions.CrystalReports.EngineImports CrystalDecisions.CrystalReports.Engine.ReportClassPublic Class PrintInspectionLayout Inherits System.Web.UI.Page Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load Dim mNotInSpringDesign As String Dim mPartType As String mNotInSpringDesign = Request.QueryString("NotInSpringDesign") If mNotInSpringDesign = "TRUE" Then mStockCode = Request.QueryString("StockCode") lblNotInSpringDesign.Text = "Stock Code #: " & mStockCode & " does not exist in Spring Design." lblNotInSpringDesign.Visible = True Response.Write("<br><br><br><br><br><font color='blue'><center><a href='SpringDesignWildCardSearch.aspx'>Go To Search Page</a></center></font>") Else mStockCode = Request.QueryString("StockCode") Dim pList As ParameterValues = New ParameterValues Dim paramName, paramValue As String Dim pV As ParameterDiscreteValue = New ParameterDiscreteValue Dim Report As ReportDocument= New ReportDocument Dim expOpts As ExportOptions = New ExportOptions Dim pdfRtfWordFormatOpts As PdfRtfWordFormatOptions = expOpts.CreatePdfRtfWordFormatOptions Dim expFormatOpts As ExportFormatOptions = expOpts.ExportFormatOptions expOpts.ExportFormatType = ExportFormatType.PortableDocFormat mPartType = Request.QueryString("PartType") 'SELECT THE INSPECTION LAYOUT TYPE TO PRINT Select Case mPartType Case Is = "C" Report.Load(MapPath("./Reports/CompressionLayout.rpt")) 'Report.Load(MapPath("./Reports/PCAR.rpt")) Case Is = "E" Report.Load(MapPath("./Reports/ExtensionLayout.rpt")) Case Is = "T" Report.Load(MapPath("./Reports/TorsionLayout.rpt")) Case Is = "W" Report.Load(MapPath("./Reports/WasherLayout.rpt")) Case Is = "F" Report.Load(MapPath("./Reports/FreeFormLayout.rpt")) Case Else End Select pV.Value = mStockCode pList.Add(pV) Report.DataDefinition.ParameterFields("StockCode").ApplyCurrentValues(pList) Response.ClearContent() Response.ClearHeaders() Response.ContentType = "Application/pdf" Report.ExportToHttpResponse(expOpts, Response, False, "") Report.Close() End If End Sub Any ideas as to the solution? Why is it not displaying correctly? I have spent two days researching every FAQ to try to find an answer, but to no avail. Please any help would be greatly appreciated. ThanksMike

Hi Paul
You're more likely to get an answer to this if you post in the UNIX forum.
By the looks of it, you may have a problem with your fonts.

Eurosign not displayed correctly when picked from database

Hi ..
I'm having a problem getting a eurosign stored in an Oracle Database to be displayed correctly in my Crystal Reports 11.5.
When using the built in (preview) Crystal Viewer, the eurosign is displayed correctly, but when I want to print the report directly to a printer or to export it to pdf the eurosign is displayed as a box?
It only haapens when i need to pick the eurosign from the database. If I insert in a textbox on the report, it will show correctly.
Please Help.
Best regards,
Jacob

What is the source of the text stored in the database. I ran into an issue a ways back where someone was copying news articles from a website into their database and the euro symbol would not display correctly (unless the option HTML Text Interpretation was used).
You might want to do a quick check to see if it is stored as an ascii character using a formula similar to the following;
asc(mid({database, x, 1}))
where x = the position of the euro symbol in the string.
The formula result should be 128.
Edited by: Graham Cunningham on May 22, 2009 12:20 PM

Dreamweaver tables not displaying correctly in internet explorer browser, please help!!!!

Could someone please help me with this issue i've been having for almost a year now and can't find any information on getting this fixed, for some reason the features specs and required tables rows are not displaying correctly, the image is out of aligned when viewing the results using the internet explorer browser only, the firefox browser works just as needed but when i try to view the same code in IE the tables are not aligned properly and the text is not margined correctly either, i tried playing around with the css style that i have and no results. Please help me fix this issue so that my page would display in internet explorer just like under Firefox. Below are the pictures of the problem i'm having.
This picture shows how i want it displayed on the internet explorer and firefox browser:
Here is results in firefox browser:
Here is results in internet explorer browser:
As you can see the tables are all messed up, text is not centered properly even if i coded it right.
Here is the coding for this page:
PLEASE HELP ME OUT WITH THIS PROBLEM, I NEED TO FIGURE OUT HOW TO MAKE INTERNET EXPLORER TO DISPLAY THE INFORMATION CORRECTLY JUST LIKE FIREFOX?
<style type="text/css">

</style>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR<td></td>
</tr>
<tr>
<td height="31" align="center" valign="middle" class="number">HPI Item #10620<td width="10"></td>
</tr>
</table>
<table width="925" height="326" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onClick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onClick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onClick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onClick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onClick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onClick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onClick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onClick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" height="124" border="0">
<tr>
<td height="320" class="description"><p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center" class="features">Features:</td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td height="526" class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
<td> </td>
<td class="featurebackground">
<ul>
<li class="featurebackground">Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li class="featurebackground">Transmitter Batteries: 8x AA</li>
<li class="featurebackground">Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p>
<p> </p></td>
</tr>
</table>
<table width="928" height="621" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/ePaymentMethod.jpg" class="policy"><p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p>
<p> </p></td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="220" background="http://www.ehobbyplanet.com/eBay/Layout/eNormalShipping.jpg" class="policy"><p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td height="104" background="http://www.ehobbyplanet.com/eBay/Layout/eInsurance.jpg" class="policy">We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</td>
</tr>
<tr>
<td height="21"> </td>
</tr>
<tr>
<td height="135" background="http://www.ehobbyplanet.com/eBay/Layout/eReturns.jpg" class="policy">We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</td>
</tr>
</table>
</body>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
Here is my contact information:
Paul
[email protected]

Try this without the border images and it will work in all browsers with increased text size. That's assuming eBay supports embedded CSS styles (which I'm not convinced they do). Inline styles are safer IMHO.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
.title {
background-image: url(http://www.ehobbyplanet.com/eBay/Layout/Title.jpg);
background-position: center center;
font-size: 24px;
font-weight: bold;
color: #FFF;
font-family: Tahoma, Verdana, Arial, Helvetica, sans-serif;
vertical-align: middle;
h2 {font-size:1.7em; color:#000; margin-top:0em; margin-bottom: 2px;}
ul,li {
font-size:14px;
list-style:disc;
line-height:1.5;
font-family: "Times New Roman", Times, serif;
.description {
font-family: "Times New Roman";
font-size: 16px;
line-height: 1.2;
font-weight: bold;
color: #000;
text-align: left;
vertical-align: middle;
border: 4px solid red;
padding: 0 20px 20px 20px;
.text {
font-family: "Lucida Sans Unicode", "Lucida Grande", sans-serif;
font-size: 14px;
font-weight: bold;
color: #F00;
text-indent: 2em;
.features {
font-family: Georgia, "Times New Roman", Times, serif;
font-size: 18px;
font-style: italic;
font-weight: bolder;
text-decoration: underline;
color: #666666;
line-height: 3em;
.featurebackground {
padding-right: 10px;
border: 4px solid red;
width: 200px;
vertical-align: top;
padding-top: 1em;
.policy {
border: 4px solid red;
margin-top: -2em;
.fsr_style { font-family: Arial, Helvetica, sans-serif;
font-size: 12px;
color: #000000;
background-color: #FFFFFF;
padding-top: 5em;
padding-right: 20px;
border: 4px solid red;
.number {
.policy {
font-family: "Times New Roman", Times, serif;
font-weight: normal;
font-size: 14px;
padding: 0 20px 20px 20px;
</style>
</head>
<body>
<table width="935" border="0">
<tr>
<td><img src="http://www.ehobbyplanet.com/eBay/Layout/eHobbyShortHeader.jpg" width="928" height="165" /></td>
</tr>
<tr>
<td height="44" align="center" valign="middle" class="title">HPI 1/5 Baja 5T Gas Truck RTR</td><td></td>
</tr>
<tr>
<td align="center" valign="middle" class="number">HPI Item #10620</td><td width="10"></td>
</tr>
</table>
<table width="925" border="0">
<tr>
<td width="16"> </td>
<td width="549"><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg" width="549" height="429" id="mainPic"/></td>
<td width="35"> </td>
<td width="1559"><p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1sm.jpg" width="116" height="85" onclick="changePic('Image-1')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2sm.jpg" width="116" height="85" onclick="changePic('Image-2')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3sm.jpg" width="116" height="85" onclick="changePic('Image-3')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4sm.jpg" width="116" height="85" onclick="changePic('Image-4')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5sm.jpg" width="116" height="85" onclick="changePic('Image-5')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6sm.jpg" width="116" height="85" onclick="changePic('Image-6')"/></p>
<p><img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7sm.jpg" width="116" height="85" onclick="changePic('Image-7')"/> <img src="http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8sm.jpg" width="116" height="85" onclick="changePic('Image-8')"/></p>
<p class="text">Click to enlarge picture</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td class="description"><h2>Description</h2>
<p>HPI Racing is proud to present the Baja 5T, a <strong>ready-to-run</strong> (RTR) 1/5th scale off-road truck that expands on the award-winning Baja 5B family. With the Baja 5T you get aggressive desert truck looks, high performance new features, and compatibility with many of the existing Baja 5B spare parts and option parts, wrapped up in a RTR package that gets you running in just a few minutes.</p>
<p>Includes: HPI Baja 5T RTR Truck with 1.6 cu in gasoline engine, 27MHz FM Radio, two water resistant servos, 3.4oz (100cc) 2-cycle oil, 2oz (60cc) shock oil, 1oz (30cc) diff oil, 1oz (30cc) air filter oil, tube of gear grease, 3000mAh receiver pack, wall charger, body with wing, extra air filter, wrenches, decal sheet and illustrated instruction manual.</p></td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td width="290"> </td>
<td width="17"> </td>
<td width="292"> </td>
<td width="17"> </td>
<td width="290"> </td>
</tr>
<tr>
<td align="center"><span class="features">Features:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Specifications:</span></td>
<td align="center"> </td>
<td align="center"><span class="features">Required:</span></td>
</tr>
<tr>
<td class="featurebackground"><ul>
<li>Ventilated Disc Brake System</li>
<li>Heavy Duty Rear Dogbones</li>
<li>Moulded Nylon Rear Spoiler</li>
<li>Aluminum Alloy Diff Case</li>
<li>Dirt Guards</li>
<li>Full Metal Ball Bearings</li>
<li>Front & Rear Sway Bars</li>
<li>Modified Rear Shock Tower</li>
<li>Heavy Duty Inner Foam</li>
<li>Revised Gearing</li>
<li>High Flow Muffler</li>
<li>SFL-10MG2 Metal Gear Steering Servo</li>
<li>Heavy Duty Beadlocks</li>
<li>8000 RPM Clutch</li>
<li>Anodized Aluminum Parts</li>
<li>Double Wishbone Suspension</li>
<li>Adjustable Suspension</li>
<li>Baja 5T-1 Truck Body</li>
<li>Extended Roll Cage</li>
<li>Outlaw Truck Wheels / Desert Buster Tires</li>
<li>Fuelie 26 Engine (26cc)</li>
<li>All Metal Transmission Gears</li>
<li>High Quality Radio Gear</li>
</ul>
</td>
<td> </td>
<td class="featurebackground"><ul>
<li>Drive System: 2WD viscous Diff</li>
<li>Tires (front & rear): Truck Wheels / Desert Buster</li>
</ul>
</td>
<td> </td>
<td class="featurebackground">
<ul>
<li>Unleaded Gasoline: 87-93 octane, mix gasoline with two cycle oil at 25:1 ratio</li>
<li>Transmitter Batteries: 8x AA</li>
<li>Screwdriver: Flat blade, 3/16" (4-5mm) wide</li>
</ul>
</td>
</tr>
</table>
<table width="928" border="0">
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Payment Method </h2>
<p>We accept Visa, Mastercard and Discover Card and PayPal. If your unable to send payment using these methods please contact us at [email protected]. All payments need to be sent within 5 days.
</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Shipping & Handling </h2>
<p>All our orders are shipped out within 72 business hours unless stated. We ship everything out using the best packaging material to insure safe deliveries using shipping companies such as USPS Postal Office and UPS services (Shipping times will vary depending on the service you choose). Tracking information will be automatically sent via email after an order has been shipped out. We Definitely Combine Shipping for multiple items, if for some reason our eBay checkout isn’t combining your items please wait for a custom eBay invoice which will have your order combined into one, reducing the shipping price. For international customers, please note: "that Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Check with your country's customs office to find out what these additional costs will be before you bid or buy".</p>
<p>Please Note for International Customers Only: Due to the large size of this item there are several countries that have a size limitation which we are not able to ship to, if by any means your order goes through to us and it falls in the country size restrictions and your order cannot be shipped out we have the right to cancel your order (before cancelling the order we will contact the customer via email).</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Insurance</h2>
<p>We offer insurance which is optional during checkout for both Domestic and International customers which will cover the full amount paid by customer, if insurance isn't purchased we are not responsible for packages that are missing during transit. If you use the USPS First Class Mail International shipping service please allow 10 - 25 business days for the delivery of your package.</p></td>
</tr>
<tr>
<td> </td>
</tr>
<tr>
<td class="policy"><h2>Returns</h2>
<p>We want you to be completely happy with your purchases. So we do everything we can to assure you get the exact merchandise you order, delivered on time. If by any means your unsatisfied with your purchase we will be happy to accept returns for an exchange or a refund within 14 days. If shipping the item back, customer is responsible for freight charges to us. We offer refunds & exchanges if your not satisfied with your purchase. The returned product needs to be in the same condition it was shipped out in, unused and in it’s original packaging. If by any chance there has been an issue with your order and you want to request a return please email us at [email protected].</p></td>
</tr>
</table>
</body>
</html>
<script type="text/javascript">
if(document.images) {
tempImage = new Image();
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-1md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-2md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-3md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-4md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-5md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-6md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-7md.jpg";
tempImage.src = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/Image-8md.jpg";
function changePic(newName) {
newPicURL = "http://www.ehobbyplanet.com/Items/RC/HPI/10620/"+newName+"md.jpg";
mainPic.src = newPicURL;
</script>
That's the best solution I can offer.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

Adobe Illustrator file will not display correctly when logged in as a user

I am working with an Adobe Illustrator CS2 file that will open and display correctly if I log in as Administrator, but will not display correctly if I am logged on as a user. The error message is that there is not enough memory to display the file correctly and I am forced into preview mode. The user Home folder is on a server. Other than this, I have made certain that the criteria for opening the file match under both interfaces. I have opened the AI CS2 file on other Macs and it opens fine. I conclude that the problem is with the user Home folder, but beyond that, I'm stumped. Any help will be appreciated.

After I filed a bug-report an Apple engineer contacted me, and asked me to try running java in headless mode: http://java.sun.com/developer/technicalArticles/J2SE/Desktop/headless/
That solved the problem!

Report Links in OBIEE 11g Dashboard not displayed correctly

In the Dashboard pages the Report Links for Export are not displayed correctly .
Instead of showing the multiple options for export/download it shows just text.

It can be done by doing below steps.
1) before doing this take a backup of instanconfig.xml file and do the below changes...
You can configure various options that change the way that right-click interactions are handled in views for an analysis at runtime. The elements in the instanceconfig.xml file specify the default settings for a new or upgraded analysis. You can edit the properties of an analysis in Presentation Services to modify how the analysis handles right-click interactions in views.
Before you begin this procedure, ensure that you are familiar with the information in Section 3.4, "Using a Text Editor to Update Configuration Settings."
To manually configure for interactions in views:
2) C:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml
Open the instanceconfig.xml file for editing,
3)
Locate the sections in which you must add the elements
Include the elements and their ancestor elements as appropriate, as shown in the following example:
<ServerInstance>
<Analysis>
<InteractionProperties>
<InteractionPropertyAddRemoveValues>false</InteractionPropertyAddRemoveValues>
<InteractionPropertyCalcItemOperations>false</InteractionPropertyCalcItemOperations>
<InteractionPropertyDrill>false</InteractionPropertyDrill>
<InteractionPropertyGroupOperations>false</InteractionPropertyGroupOperations>
<InteractionPropertyInclExclColumns>false</InteractionPropertyInclExclColumns>
<InteractionPropertyMoveColumns>false</InteractionPropertyMoveColumns>
<InteractionPropertyRunningSum>false</InteractionPropertyRunningSum>
<InteractionPropertyShowHideSubTotal>false</InteractionPropertyShowHideSubTotal>
<InteractionPropertySortColumns>false</InteractionPropertySortColumns>
</InteractionProperties>
</Analysis>
</ServerInstance>
4) Save your changes and close the file.
5)
Restart Oracle Business Intelligence.
Mark as correct if it is helpful :)
Thanks.

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background. i am on a Windows 7

When I open a pdf in Adobe Acrobat xi pro it is not displaying correctly. If a file is all black with orange writing, I will see only the orange writing. Its not until i print it or open crop pages dialog box that i see the background.
i am on a Windows 7 professional PC, 64-bit.

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

Management studio dialogs not displayed correct in high resolution

I am using a Lenovo Yoga2 with 3200x1800 screen resolution, and some dialog boxes are not displayed correct, like the Select backup file dialog that doesn't display directory and the file list. Is there any fix for this?

I'm having the same issue. Let me try to elaborate a little, providing you with more details.
Laptop, Dell Precision M3800
Resolution, 3200x1800 (getting more common on new high-end laptops with 15+ inches)
OS, Windows 8.1
Application, SSMS aka SQL Server Management Studio - version 2014 (earlier version has same issue)
SQL Server Engine irrelevant (tested with 2014 and below - all the same)
I understand you want to see a screenshot, but really, it doesn't make sense as you won't be able to reproduce the error if you are watching on e.g. a FullHD screen. therefore, I've taken a screenshot and resized it to a FullHD size so you get a better feel
of the issue - however, I have to mention text will look a lot more crisp on a 3200x1800 screen (that's kind of why you want a screen with high PPI). That said, it's still way too small to look at.
If you view below image on a 15.4 inch screen with FullHD, you get a feel of how I work with SSMS today.
http: // i.imgur.com / TwOmzjr.png (remove spaces)

Arabic text not displaying correctly in Win Server 2008 R2

Hi,
We have an .mdb database stored on our Windows Server 2008 R2 server but when we view the contents some of the text has strange characters.
When we view the same db in Windows Server 2003 we do not have these characters. I'm not sure what exactly we need to do to correct this issue..
Any suggestions welcome..

Hi,
Thanks for your post.
When you open a Web page or a text file that contains a string of Arabic characters, the string is not displayed correctly. This issue occurs when the following conditions are true:
The Left-to-Right Override (LRO) Unicode control character is used in the string of Arabic characters.
You specify a font that is not Simplified Arabic Fixed.
Please apply the hotfix below:
Incorrectly displayed Arabic characters in Windows 7 or in Windows Server 2008 R2
https://support2.microsoft.com/kb/976525?wa=wsignin1.0
And check the result.
Regards.
Vivian Wang

Masking not displaying correctly

Similar Messages

Maybe you are looking for