Masking the displayed destination in Call Redirect situation

We have a Helpdesk script in UCCX that redirects the caller to a specific internal DN during on-call hours (after hours), instead of routing to the CSQ. Helpdesk technicians change a call forward all setting on that redirect DN to reflect whatever external mobile phone number is on call during a particular week.
The problem is that we do not want to disclose the redirect destination (neither the internal DN nor the currently assigned call forward all external mobile number). Currently, once the redirect is successful and the system calls the on-call mobile number, the original internal caller to the Helpdesk will see that final destination number displayed on the phone placing the call.
How can I manipulate the display of the called number for that call redirect?
Thanks a lot for any pointers,
Matthias

Thank you very much, that did the trick! :-)
I'm quite the newbie in UCCX so I wasn't sure if I just couldn't find it there due to my lack of experience... I tried the translation pattern in CUCM instead and that worked without a hitch. I now have UCCX redirect to the pattern configured in CUCM, which translates to my internal on-call destination. What's nice is that I can separately control called name and number restrictions... I restrict the number only but can still display the name label of the internal extension.
Matthias

Similar Messages

Mask or hide calling-id on the display on phones

Hello Community.
I know how to mask the caller-id on the display on phones. But i want to mask the calling-id. So our sales people doesn't see who is calling from outside.
Is there a way to mask or hide the callng-id on phones ?
Thanks and best regards Patrick

Hi Paolo.
I did the config but I still see the phonenumer on the phone. Followed my changes
voice translation-rule 7
rule 1 /0........./ //
voice translation-profile MASK
translate calling 7
translate called 7
ephone-dn-template 10
translation-profile incoming MASK
ephone-dn 48 octo-line
number 26 secondary 3558041 no-reg primary
description Test Sechs
name Test Sechs
ephone-dn-template 10
If i do debug translation detail, i dont see my new translation rule translating. The only translation rule is see in debuging is this one:
voice translation-rule 6
rule 1 /3558041/ /26/
voice translation-profile BRI0_Called_6
translate calling 3265
translate called 6
Coming from this dial peer:
dial-peer voice 3003 pots
description BRI0
translation-profile incoming BRI0_Called_6
incoming called-number 3558041
direct-inward-dial
port 0/1/1
dial-peer voice 3002 pots
description BRI0
translation-profile incoming BRI0_Called_6
incoming called-number 3558041
direct-inward-dial
port 0/1/0
Did i forgot something ?
Thanks in advance Patrick

The Response Group application was unable to transfer the call to the configured destination and no fallback exists

Hey,
I get this error message when calling into an unassigned number which redirects to a response group:
From user URI:
sip:[email protected];gruu;opaque=srvr:Microsoft.Rtc.Applications.Acd:RS6nRGV9DlmpNsLtmz5qeQAA
To user URI:
0220198611;phone-context=DefaultProfile
From user agent:
RTCC/4.0.0.0 Response_Group_Service Announcement_Service
Diagnostic header:
26005; reason="The Response Group application was unable to transfer the call to the configured destination and no fallback exists."
Interestingly "To user URI: 0220198611;phone-context=DefaultProfile" is the number off the caller not the destination. I wonder is this a bug? So is the response group trying to transfer to this number and failing because of course it doesnt exist?
As you can see the below the number I am calling is not 0220198611:
From phone number: 0220198611;phone-context=DefaultProfile
To phone number: +6493760053 From mediation server: onzlyncfe1.domain.co.nz To mediation server: From gateway: 192.168.100.70
To gateway:
Disconnected by: +6493760053
Does the calling party's number have to be normalised? If so how can I do this because the global normailisation rules dont seem to apply
in this situation. These rules do work when when calling into a users DDI.
Also to be clear....
+6493760053 is an unassigned number which is setup to redirect to a response group.
If I assign +6493760053 to a user then it works.
Additionally this works perfectly when the gateway sends the call to our legacy 2007r2 mediation server then on to Lync. If the gateway sends the call directly to the co-located Lync mediation server I get the error described.
I hope I make sense. If you are confused let me know :)
Help is appreciated.
Thanks,
Andrew

Hi ANdrew
Kindly advise how you transfered the unassigned numbers to a specific user, i used the below command but it failled, the message displayed but the call never routed:
New-CsAnnouncement -Parent service:ApplicationServer:LyncFE.squareone.local -Name "SQ unassigned number announcement" -TextToSpeechPrompt "You entered an invalid extinsion you will be forwarded to the operator" -Language "en-US" -TargetUri "sip:[email protected];user=phone"
While [email protected] is the sip uri in my lync for the operator
could you advise what is my issue?

Hey, I'm fixing up a Power Mac G5 for a friend, he gave me a Cinema HD 30' display to use with it. My problem is, the Power Mac G5 doesn't have a place where I can plug in one of the display's cords. the cord is called a "DC power (24.5 V)"

So the Cinema HD's DVI goes in fine, I don't remember what video card is in the computer, all I know is it's Nvideo, it's old, only like 256MB, but does have two DVI ports. Anyway, then the display's firewire and USB can go in. But there's this weird thing, had to do some research to figure out what the connector/cord is called. it's the size of a USB, rectangular with oval sides. It's called a "DC power (24.5 V)" I'm like, what the heck is this thing? it won't go into the computer anywhere, I'm assuming I need some sort of adapter?? Help please, if I need an adapter or video card, links would be extremely helpful.
Best regards,
Poly

I don't believe so, I have a DVI to ADC adapter I was messing with, my DVI from the display plugs into the adapter, then i grap the adapter's ADC connector, and it does not go into my Power mac G5's video card. So that confirms that the display is DVI, and works with my DVI video card perfectly. It's just the one wire/connector that apple calls the "DC power (24.5 V)" that won't go in anywhere. Basically the display has a DVI connector, firewire connector, and USB, which all go into my Power mac G5 fine. However, it has another wire with a connector that won't go in anywhere, from what I've read off the teach specs of my Cinema HD 30' that final connector/wire is listed as "DC power (24.5 V)"
So my problem is with that. I have NO idea what it does, or goes into. When I google "DC power (24.5 V) Apple" it comes up with weird images none of which have that connector. So I'm just so. Confused.

Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that

Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that Brazil has no repair services for Apple, which was the basis of its price change in the exchange is not worth half the value of the product.
I wonder how I do to change this device without the expense of 50% for the same product is in warranty?
Thanks in advance.

yes agree, plus a multinational seeing a product and has no technical assistance to do the maintenance then it's no use I buy a new product if it is damaged I will always be because it has no prejudice in this maintenance.
sorry but even more products coming from China to Brazil in technical assistance.

My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?

My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?
Another thing is that on Skype, whenever i clicked to sharescreen it only show a complete black out window. nothing else.
Tried restore OSX mountain lion, doesn't work. what should i do?

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

HT5557 hello...my questions is related to objective C...Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.

hello...my questions is related to objective C..
Is it possible to display name of the person who is calling me whose number is saved in my local database but not in iphone contacts ?.

ashish35,
No one from Apple here - we're just users like you. All I can tell you is that electronic fail and with MacBook Pros (and most notebooks) the components are so integrated as to make a repair to the logic board practically impossible, hence the high prices charged for repairs.
Only you can decide if you want to have your computer repaired or put the money towards the purchase of a new computer. If you do decide to purchase a new unit I would suggest that you also purchase the AppleCare Protection Plan which increases your warranty from one year to three years.
Sorry and good luck,
Clinton

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support?

My new ipod classic does not work anymore! The music stopped and the display is dead. What now, besides calling support? Useless to say my PC didn't recognize the Ipod anymore either.

Anton, I wish I could help. I had an old iPod Classic (60 KB) as a gift but it went dead, I dropped it a few times accidentally, and it sat carefully saved until I had sufficient resources, energy and time to get the matter addressed. In my case, I actually took the thing (after making sure it was charged) to an Apple store and one of the geniuses at the genius bar at the back of the store took it and did a few things (unseen and un-noted) with his fingers and handed it to me with a sly smile. Voila, the thing was functional. I got a re-functionalized iTunes account and store access when I bought my iMac. I did lose a few tunes along the way because it didn't recognize my new iMac as the source (my old dead PC laptop), but I have a more functional memory than the iPod and recovered them all in other ways. The whole thing is humming better than ever. At over 11 gb full, I have 4.2 days worth of portable listening. Be patient; it took me four years to get musical nirvana in a pocket, but you'll get there faster. Call support.

[svn:fx-trunk] 12542: When adding a mask to the display list need to validate it and all its children .

Revision: 12542
Revision: 12542
Author:   [email protected]
Date:     2009-12-04 10:38:32 -0800 (Fri, 04 Dec 2009)
Log Message:
When adding a mask to the display list need to validate it and all its children. Previously the children were not validated and their display list was updated before properties were committed or measure was done. RichText was not set up to handle this.
QE notes:
Doc notes:
Bugs: SDK-24511
Reviewer: Evtim, Deepa
Tests run: checkintests, fxg, primitives, Group
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24511
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/GroupBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/utils/MaskUtil.as

AFAIK, the only way to do this is to write a system modifcation.
The BADI is executed only once at startup of the session, so that makes it merely static. (A strange point in time, I discussed it with SAP and they just shook their heads)
I had the same problem with some other F4-Helps and it was a big hazzle. From my experience, no straight answer.

Java displays not being redirected to the DISPLAY environment variable

I am running Solaris 8 and am using java se 1.4.1.
I have a java application that is running in the background on BOX 1. It needs to use the JOptionPane.showmessage() function.
When I remote onto Box 1 from Box 2, and run the java application, the message boxes from the JOptionPane.showmessage() are displayed on Box 1 instead of getting redirected to box 2. I know that the display setting are ok, since I can start other applications and get the displays sent to box 2.
Is this a java bug?
thanks
Ben

Hi Balus,
Thank you for your reply, yes the response is absolutely empty just an empty page like:
<html><body></body></html>In the logs I can see the normal trace about the error but nothing else.
I found a "solution" that is working fine but I'm not sure if is the best to do, basically
I'm throwing again the ServletException generated in the JSP an then is working:
void autoForward(String forwardTo, HttpServletRequest request,
            HttpServletResponse response, ServletContext servContext,int errorCode)
            throws ServletException {
        try {
            addErrors(request,errorCode);
            RequestDispatcher dispatcher = servContext.getRequestDispatcher(forwardTo);
            dispatcher.forward(request, response);
        } catch (ServletException ex) {
            throw new ServletException(ExceptionUtils.getRootCause(ex));

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messages. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles. Any idea how to fix the problem?

I just upgraded my iPhone4s to iOS7 and now I am unable to make phone calls and send/receive text messaes. Network signal indicator on the upper left side of the display shows hollow circles instead of full circles (but with the network provider name). I checked with my colleagues in the office who use the same network and theirs work just fine on iOS7. Any idea how to fix the problem?

I have also called my service provider and my service remains active in the network. I tried removing and reinserting my SIM but to no avail.

[svn:fx-trunk] 11641: A simple fix - we need to keep track of the display list index for non-clipping masks such as luminosity masks , not just alpha masks.

Revision: 11641
Author:   [email protected]
Date:     2009-11-10 18:29:57 -0800 (Tue, 10 Nov 2009)
Log Message:
A simple fix - we need to keep track of the display list index for non-clipping masks such as luminosity masks, not just alpha masks.
QE notes: Please include tests for multiple graphic content nodes with masks under a .
Doc notes: N/A
Bugs:
SDK-24133 - Multiple non-Group maskees don't work when using maskType="luminosity"
Reviewer: Deepa
Tests run: Checkintests, Bug test case
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24133
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java

Revision: 11641
Author:   [email protected]
Date:     2009-11-10 18:29:57 -0800 (Tue, 10 Nov 2009)
Log Message:
A simple fix - we need to keep track of the display list index for non-clipping masks such as luminosity masks, not just alpha masks.
QE notes: Please include tests for multiple graphic content nodes with masks under a .
Doc notes: N/A
Bugs:
SDK-24133 - Multiple non-Group maskees don't work when using maskType="luminosity"
Reviewer: Deepa
Tests run: Checkintests, Bug test case
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24133
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/fxg/FlexFXG2SWFTranscoder.java

How can I change the display name when I call someone?

I recently gave a re-provisioned 8300 to a new employee. I wiped out the phone, and re-setup the phone in our exchange server to match the new user's settings.
The only problem he's having is that when he calls someone, the display name shows the previous users name as the person calling.
How do I change that?
Thanks in advance,
howe132

You don't say what model the device is, but if GSM, make sure the SIM card has not been edited to the preview name.
Options > Advanced > SIM card > Menu > Edit Sim Phone Number
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

In my i phone 4s when i call the display moves or shrinks like a vibrate

In my i phone 4s when i call the display moves or shrinks like a vibrate

Have you contacted your carrier?
Who is your carrier and where are you?
Is your carrier on this list? http://support.apple.com/kb/ht1937

After updating my iOS the display goes white after I end a call or if I get a missed call?

After updating my iOS the display goes white after I end a call or if I get a missed call?

Did you reset your phone like this: Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
If that didn't help I suggest having a technician examine your phone. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Masking the displayed destination in Call Redirect situation

Similar Messages

Maybe you are looking for