Mass activity run to fill tables FKKMAKO,FKKMAZE,FKKMACTIVITIES
Dear All,
As per help.sap.com, it is mentioned that we need to do mass activity run for filling these Dunning tables(FKKMAKO,FKKMAZE,FKKMACTIVITIES). It is not mentioned the mass activity run names to fill these tables.
Please help me , what are the mass activity run to update these tables.
NA
Similar Messages
-
Mass activity running only once for custom parallel object
Hi
I have created custom parallel object EXT_UI and created mass activity for this but the report in triggered only once and not going for second interval .
Can any one help me out in this.
Thanks in advance.
Chetan
Message was edited by: CHETAN N P
Mass activity is running fine for standard object ANLAGE but not for custom one
Please share me steps to be followed in creating custom parallel object.
Regards,
ChetanHi Chetan,
I think you need to make changes in the Events which gets triggered by the mass activity.
Can you let me know the mass transaction code for which you have customised the activity,
Thanks,
Amlan -
Deleting expired application logs is key to improving mass activity performance issues
During mass activity runs reference is made to the system's application logs during the process of line item selection. Performance based issues can be overcome by deleting old/expired application logs from the system, and rebuilding the affected table index. Based on my analysis on these issues, there has been a significant observation of 90% improvement in performance.
Dear Astrid,
Depending on the performance trace observed using transaction ST12, if for instance the SELECT on a particular table takes the most time, deleting all expired application logs and rebuilding the table index will result in a significant performance improvement.
Yes 90% improvement will be observed across the entire mass activity run. In my example below I use table BALHDR.
1. Run report SBAL_DELETE to delete all expired
application logs from table BALHDR
1.1. At the selection screen of report
SBAL_DELETE, set the radio button for the expiry date to 'Only logs which have
reached their expiry date’
1.2. Under the tab for 'Selection
conditions', enter the affected transaction code. e.g FPVA
1.3. To delete the entries, set the radio
button under the Options tab to 'Delete immediately'
1.4. Finally, execute or use shortcut F8 to
delete logs
2. Rebuild index 1 on table BALHDR (create a
secondary index on the table).
I hope this helps.
Kind Regards,
Adrian -
How to run mass activity for DS 0FC_INVDOC_00 and activate 2710 event
Hi,
I am trying to extract data from DS 0FC_INVDOC_00 it gets me 0 records.I read in the form that to get the records i have to run the Mass Activity type 2620 and for daily processing of invoicing, you have to activate 2710 event.Can anyone please let me know how to do this?
Thanks,Thanks Denis, I did initialization on Bi side and now trying to extract data (FULL) in rsa3 thats when it gets me 0 records.Is there any other step i need to do to extract records?? According to the postiong in the SDN (Refre to the following link) there are activities which need to be done for getting the data.This where i am stuck.
Re: 0FC_INVDOC_00 FICA Extraction of Invoicing Document Data
Thanks, -
How to run Mass Activity for DS 0FC_INVDOC_00 and activate 2710 event in R3
Hi,
I am trying to extract data from DS 0FC_INVDOC_00 it gets me 0 records.I read in the form that to get the records i have to run the Mass Activity type 2620 and for daily processing of invoicing, you have to activate 2710 event.Can anyone please let me know how to do this?
Can anyone please help me on this??
Thanks,Thanks Denis, I did initialization on Bi side and now trying to extract data (FULL) in rsa3 thats when it gets me 0 records.Is there any other step i need to do to extract records?? According to the postiong in the SDN (Refre to the following link) there are activities which need to be done for getting the data.This where i am stuck.
Re: 0FC_INVDOC_00 FICA Extraction of Invoicing Document Data
Thanks, -
Automating the mass activity FPBW (pscd open items extraction into BW)
Hello all -
We are trying to automate the PSCD mass activity for open item extraction into bw. We have tried using the t-code FPBW (how you would run it manually), and we have also tried using the mass activity scheduler - rfkk_ma_scheduler. We can't get it so the key date updates each week. Can anyone provide some guidance on how to get this automated?
Many thanks!hi buddy,
go to SBIW go to the setting for application specificdatasourse in that go to contact account recivable, click the fileds for extrction add the field the data to see in to dffkopbw table after mass activity
regards
nag -
Mass Activity - Error in SAP CPS
Hi guys,
I am trying to run a mass activity from SAP CPS in the ISU system. I imported the mass activity - 0004, the posting and the document date had to be changed dynamically, so I created a parameter set as shown here.
Created a job to copy parameters(these two parameters only). Ran the job, the parameters are created and copied to target id FPMA5
Created a copy of the job SAP_MassActivityTemplateRun -> Used the Target ID as shown and date as today.
So, I am consuming the Identification FPMA5 from the previous job run here. Tried to run it, getting the below error in the SAP CPS system.
com.redwood.scheduler.connector.sap.rfc.connection.exception.SapBapiException: BAPI exception while calling /SCJS/ISU_START_MASS_ACTIVITY: E XM 300 RAISE_EXCEPTION {00,341} Runtime error & has occurred [0004,K2,26.05.2014,FPMA5]
BAPI exception while calling /SCJS/ISU_START_MASS_ACTIVITY: E XM 300 RAISE_EXCEPTION {00,341} Runtime error & has occurred [0004,K2,26.05.2014,FPMA5] [RAISE_EXCEPTION, {00,341}, Runtime error & has occurred, [0004,K2,26.05.2014,FPMA5]]
Parameters:
0004
2014-05-26
FPMA5
X
at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.checkBapiReturnCode(ClientConnectionImpl.java:727)
at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.call(ClientConnectionImpl.java:533)
at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection$4.doPerform(AbstractRfcConnection.java:310)
at com.redwood.scheduler.connector.sap.rfc.connection.RemoteFunctionCall.perform(RemoteFunctionCall.java:147)
at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.perform(AbstractRfcConnection.java:481)
at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.execute(AbstractRfcConnection.java:303)
at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.SapFunctionModuleWrapper.execute(SapFunctionModuleWrapper.java:200)
at com.redwood.scheduler.connector.sap.rfc.jco.AbstractSapFunctionModule.execute(AbstractSapFunctionModule.java:109)
at com.redwood.scheduler.connector.sap.rfc.command.impl.AbstractMassActivityRunCommand.startMassActivity(AbstractMassActivityRunCommand.java:264)
at com.redwood.scheduler.connector.sap.rfc.command.impl.MassActivityTemplateRunCommand.doExecute(MassActivityTemplateRunCommand.java:50)
at com.redwood.scheduler.connector.sap.rfc.command.impl.AbstractMassActivityCommand.execute(AbstractMassActivityCommand.java:67)
at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpCommand.doExecute(AbstractXbpCommand.java:84)
at com.redwood.scheduler.connector.sap.rfc.command.AbstractCommand.execute(AbstractCommand.java:57)
at com.redwood.scheduler.connector.sap.rfc.service.operation.RunJobOperation.doWork(RunJobOperation.java:136)
at com.redwood.scheduler.connector.sap.rfc.service.SapJobWork.doWork(SapJobWork.java:38)
at com.redwood.scheduler.infrastructure.workqueue.Worker.run(Worker.java:76)
at java.lang.Thread.run(Thread.java:722)
I now added other parameters into the parameter set, maintained them in the COPY_Parameter job. Even then I get the same error!
I believe my problem is this - I am able to copy the parameters, but passing them to the Mass activity is somehow failing(I am using the MASS_ACTIVITY_TARGET_ID field output from Copy parameters to MASS_ACTIVITY_ID, which I believe is wrong. But I want to use the copy parameter job's output in the mass activity template run). Please let me know.
I followed this guide: Importing and Running Mass Activities - SAP Central Process Scheduling by Redwood - SAP Library
Thanks and regards,
PavanHi Pavan,
To create a job chain-level parameter, proceed as follows:
Go to Definitions > Job Chains and choose Edit on your job chain
In the job chain editor, click on the Parameters tab
Click Add, fill in Name, for example MASS_ACTIVITY_DATE, fill 0 into Display Order.
In default expression field, fill =Time.expressionNow('truncate day add 3 days')
Make sure Display is checked, click Save
Submit the job chain, you will notice that the date is as expected, cancel the submit.
In the job chain, go to the job for which you want to set the parameter and choose Reference, select the job chain parameter.
The above will use the date at submit time + 3 days, if you want to use the runtime date, when the job chain starts, you disable Display and enable Runtime, remove 'add 3 days'.
Hope that helps.
Regards,
HP -
Mass activation of Aggregation level
Dear all..
How to do the mass activation of all Aggregation level in Modeler at one instance. while collection tp we have to activate the individual aggregation level, its more time consuming.
I have lot of aggregation levels to activate, any solutions.
Regards
PeraselHi there,
Create this program (it was referenced by a SAP note) in se38 transaction:
*& Report Z_ACTIVATE_ALVL
REPORT Z_ACTIVATE_ALVL.
TYPE-POOLS: rs.
PARAMETER: g_iprov TYPE rsinfoprov.
PERFORM run.
*& Form run
FORM run.
DATA: l_t_return TYPE STANDARD TABLE OF bapiret2,
l_s_return TYPE bapiret2,
l_subrc TYPE sysubrc,
l_t_alvl TYPE STANDARD TABLE OF rspls_alvl,
l_s_alvl TYPE rspls_alvl,
l_t_alvl_iobj TYPE STANDARD TABLE OF rspls_s_rfc_alvl_iobj.
SELECT * FROM rspls_alvl INTO TABLE l_t_alvl
WHERE infoprov = g_iprov
AND objvers = 'A'.
CHECK l_t_alvl IS NOT INITIAL.
LOOP AT l_t_alvl INTO l_s_alvl.
CALL FUNCTION 'RSPLS_ALVL_CHANGE'
EXPORTING
i_aggrlevel = l_s_alvl-aggrlevel
IMPORTING
e_subrc = l_subrc
TABLES
i_tk_alvl_iobj = l_t_alvl_iobj
e_tk_return = l_t_return.
CHECK l_subrc = 0.
CALL FUNCTION 'RSPLS_ALVL_CHECK'
EXPORTING
i_aggrlevel = l_s_alvl-aggrlevel
i_objvers = rs_c_objvers-active
IMPORTING
e_subrc = l_subrc
TABLES
e_tk_return = l_t_return.
READ TABLE l_t_return INDEX 1 INTO l_s_return.
CHECK l_subrc <> 0 OR ( sy-subrc = 0 AND l_s_return-type = 'S' ).
CLEAR l_t_return.
CALL FUNCTION 'RSPLS_ALVL_ACTIVATE'
EXPORTING
i_aggrlevel = l_s_alvl-aggrlevel
IMPORTING
e_subrc = l_subrc
TABLES
e_tk_return = l_t_return.
ENDLOOP.
ENDFORM. "run
This will mas activate your aggregation levels built on InfoProvider.
Diogo. -
Extracting Open Items : Problem with mass activity FPBW
Hi everybody,
I need to extract Open Items in BW. I use the extractor 0FC_OP_01 which extract the content of table DFKKOPBW in OLTP. Open Items are written in table DFKKOPBW by the mass activity FPBW.
I have a problem with this mass activity : the field "Business partner number" stay empty in table DFKKOPBW after the execution of FPBW, whereas it's not empty in table DFKKOP... (and for the cleared items it works...)
Does anybody have a solution for my problem?
Best regards
Aubehi buddy,
go to SBIW go to the setting for application specificdatasourse in that go to contact account recivable, click the fileds for extrction add the field the data to see in to dffkopbw table after mass activity
regards
nag -
Hi all!
I trying to learn how create mass process and i have some issues trying to follow the note 144461 - Mass activities step by step setup ... is not very clear about the relationship between the transaction and the jobs that i want to be execute.
So far I could create the transaction with the respective layout and addon, create the events etc, but when i execute the process, nothing happens... and i can't understand which step i miss.
I wanna, for example, use any existent job in the system but i don't understand how
Please, if anyone have a guide, link or something like that please help me!
Best regards!Hi Martin,
Did you attach a FM and configure your event in FQEVENTS? These steps are necessary to create a mass activity a minimum (create, save, schedule and run):
1. Custom Transaction
2. Structure for ADDONS
3. Subscreens and Group boxes for ADDONS structure fields, if necessary
4. Layout
5. Parallel Processing Object
6. Subobject for the application log
7. Interval function module and event
8. Mass activity creation
a. General control (mass activity type, interval event, transaction code, structure name (ADDONS), layout)
b. Parallel Processing object
Please provide more details on what you've configured so far to better understand your problem .
Thanks,
Sai -
BW Mass activity BWOP / transaction FPOP 2.
Hi Experts,
How will be changed Date identification in FPSCHEDULER when I will plan FPOP in FPSCHEDULER as a job?
It's possible to plan it with FKJOXTR(because FPSCHEDULER is signed as obsolete ) ? If yes how?
What is the best way run FPOP on periodic basis ?
thanks in advance.
jbHello Ram,
thanks for answer, we have still problem with FPSCHEDULER.
could please describe step by step what should be done to run FPSCHEDULER as a job? We are using mass activity type BWOP.
thanks in advance.
jb -
BW Mass activity BWOP / transaction FPOP
Hi Experts,
Please suggest how can i schedule FPOP on periodic basis (Daily/Weekly/Monthly).
with mass activity BWOP.
We are using extractor Business Partner Items data using tcode FPOP out of ECC to BW . We want to automate this extraction using mass activity BWOP in ECC .
Which transaction should be used?FPSCHEDULER or FKJOXTR?
We want to just run only FPOP on periodic basis .
thanks in advance.
Regards
jbHi Jan,
You can use FPSCHEDULER to schedule FPOP on a periodic basis.
By entering the mass activity type BWOP and the master template for FPOP (Date and identification) , click on the program->execute in background in the menu section.
You will get a pop-up for "Background Print parameters". Give output device as 'LP01' and press enter.
Another Pop-up for "Start time" will come. Click on Date\Time and then click on period values.
You will be able to set the job either hourly\daily\weekly\Monthly.. etc....
Hope it helps..
Thanks,
Amlan -
Hi experts,
Im facing some problems to deal with mass activity jobs.
When I run some mass activity transaction (ebw_dw_ss for instance) I get many records, but when I create a job to run this transaction, it doesnt work; the job always ends with 0 records extracted.
Thanks in advance,
Tomas PrusaczykHello Thomas,
we want to use Mass Activity Sheduling in SAP CRM to plan the visits of all our clientes automatically.
How we can do this? What is the name of the background job? Where we can do the cosutomizing?
Best Regards
Oliver -
Invoice documents not created in the mass activity
Hello SDN,s
The invoices(Print documents) have not been created through mass job in the EA29 transaction code.
When we run the job for mass invoice in EA29, the invoices have not been created and able to create the invoices in the EASIBI transaction code.
I have created billing documents and trying to create the invoices in EA29 transaction code and getting the error like no documents created in the application.
Could you please guide me why the invoices are not getting created in the EA29 and where do i check to resolve the issue.
Please advice.
Regards,
KVHi KV:
The mass activity IS-U for invoice creation is tx. EA26, tx. EA29 is the paralell mass printout IS-U, but first you must create the invoice document with EA26 and then print it with EA29.
Here's a list of some IS-U Billing transactions
EASIBI Create Individual Bill
EA00 Test Billing of a Contract
EA13 Print/Billing Document Reversal
EA14 Print/Billing Document Reversal
EA15 Reversal of Invoicing Documents
EA16 Create Manual Backbilling
EA17 Change Manual Backbilling
EA18 Display Manual Backbilling
EA19 Create Bill (Individual Creation)
EA20 Reverse Billing Document
EA21 Adjustment Reversal Billing Docs
EA22 Display Billing Document
EA22_TOOL Billing Tool
EA24 Delete Adj. Reversal frm Bill.Order
EA25 Create Partial Bill (Individual)
EA26 Mass Processing: Create Bill
EA27 Mass Processing: Create Partial Bill
EA28 Mass Process.: Request BB Amounts
EA29 Mass Processing: Bill Printout
EA29_AGGRBILL Print Aggregated Bill
EA33 Mass Processing: Bill Reversal
EA34 Mass Processing: Full Reversal
EA38 Mass Activity: Billing
EA39 Mass Activity: Billing Simulation
EA40 Display Print Document
EA55 Display Rate Cat.
EA56 Maint. Rate Type
EA57 Create Budget Billing Change Doc.
EA58 Mass Activity: Coll. Bill Printout
EA59 Print Collective Bill (Old)
EA60 Print Invoicing Document
EABI Billing/Invoicing log display
EABICO Bill Correction
EABIH Archive Billing Document Headers
EABIL Archive Billing Document Line Items
EABR IS-U Billing
EAIN Billing/Invoicing log display
EAMABI Mass Billing
EAMASI Mass Billing Simulation
EAMS00 Mass Billing of Simulation Indexes
EAMS01 Mass Act.: Billing of Sim. Indexes
EATR Mass Activity: Create Bill/Part.Bill
EAXX IS-U Billing
EA_DOWNLOAD Download Billing Master Data
I hope this will be helpful.
Regards,
David -
4.6c to ECC 6 upgrade - Mass activation program RADMASG0
During 4.6c to ECC 6 upgrade - when we try to use Mass activation program - RADMASG0 - how to remove warnings in a single shot ?
When I am giving some 6 table names as input for activation (under 'DIRECT OBJECTS' in Program RADMASG0 ),after execution i am getting the warning for all the three programs. (same warnings)
How to clear this.....whether i have to go one by one. If so then what is the use of this program ?
regards,
N. Prasanna kumar.Hi,
What Message you are getting.
One suggestion is that going one by one is most suitable. Other wise you will not able to detect the errors.
With regards,
Sumodh.P
Maybe you are looking for
-
Our MAC's hard drive was dying, so before we replaced it, I backed up all of our files on an external drive. In retrieving those files, I found that some of our video files had backed up as jpeg files rather than video. Now, I can't figure out how
-
Invalid characters in the names of files, folders, volumes.
I always used without problem special characters in file names, folders, and volumes such as [ - and space and french accents é è ù etc. Since Maverick, I meet different problems I am inclined to attribute to this practice. Am I right, and if so wha
-
Do I have to use passcode protect with iOS 7?
Do I have to use passcode protect with iOS 7?
-
In the console, I'm trying to create a new domain to deploy our system in. Is anyone else seeing this one? See below for error. TIA. JohnH An unexpected error was encountered in processing your request. Exception weblogic.management.MBeanCreationExce
-
System problems after installing iphone & itunes
I'm wondering if anyone else has noticed a weird problem with their computers after installing the iphone & itunes. Up untill i got the iphone, my computer was working fine. Now about every 15 - 30 mins, i get a few seconds of static sound from my sp