Mass Additions Errors

Hi,
I am trying to create/load an asset using fa_mass_additions interface by running Post Mass Additions Program
Initially i got &EXPENSE_CODE_COMBINATION_ID cannot be null and now i am getting the below error
The Location for &LOCATION cannot be NULL.
Mass Addition ID: 49701 ==> ** Failed **
Number of successes: 0
Number of failures: 1
Module Mass Additions Post ended with error
I am passing both EXPENSE_CODE_COMBINATION_ID and LOCATION_ID into fa_mass_additions interface but the trigger on it is overwriting to null
Please let me know if any one of you came across this issue.
Thanks,
Nagaraj

Hi Devidas,
1. Balance of ORD 1000010 is not zero.
For this please get in touch with Costing persons. Orders are not yet settled. hence this problem is there.
2. Unprocessed future change recs for order 1000012 prevent del. flag/completion.
Few transactions are open for this material please close it.
3. System status CRTD is active (ORD 1000220)
Please put status TECO for this orders this will solve your problem.
Please confirm,
Regards,
Amit Kulkarni.

Similar Messages

Assets Mass Addition error-APP-OFA-48400

Hi,
We are working on Oracle Applications 11i. The Assets user have run the post mass additions and the Mass Additions post gave no output when it completes successfully (POST MASS ADDITIONS REPORT and two of the MASS ADDITIONS POST resulted in error before the thired one completes successfully) and there is still one item X in the POST queue in the mass additions.
Item X was one of two items in the same PO and same invoice the second item Y was POSTED successfully and now has an asset number.
I have checked the po charge accounts, ap expense account and fa clearing account and they match.
Any clues?
This matter is urgernt please due to the period closing.
Found the following error in one of the logs:
At least one of the child requests failed.
Cause: At least one of the child requests spawned to run Mass Additions Post failed.
Action: Check the Mass Additions Post log files to find out what caused the request to fail.
Error: function famgpi returned failure (called from FAMAPT)
APP-OFA-48400: Error: function famgpi returned failure (called from FAMAPT)
Edited by: AHS on Feb 4, 2010 1:37 AM
Edited by: AHS on Feb 4, 2010 1:48 AM

Thank you for your help.
unfortunately, i have no access to metalink these days.
We had also the following error ; on the attempt to open the assignment form of the item:
APP-OFA-48317: the employee to which this distribution line is assigned is no longer valid.
when the form opens there is no emmploye visible in the assignment line.
and in the table FA_MASSADD_DISTRIBUTIONS an employee_id is there.
So, I chose an employee in the form and saved it, then I cleared the employee from the line and saved again.
Finally the problem is solved.

Mass Additions WEB ADI Issue

All,
Has anyone come across a need to modify the mass additions upload via web adi, to do validation on asset numbers. We find that if we use web adi to mass additions, the error of duplicate asset numbers is only picked up when we do a post. Our users require that validation, when they do the upload from web adi. As this was a functionality that desktop adi provided.
Any help here would be much appreciated.

Hi
Can you think about one work around
1. Import Asset table containing Asset Number before uploading the asset using Web ADI.
2. Compare the Imported data with Web ADI Template using EXCEL macro check or using a sql script
Have you loged SR & wether Oracle can think of some Validation (as this is the standard functionality) ?
Regards
Sunil Kumar

Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.

SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010

Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Imac G5 (pre isight). Mass Storage Error

I have an imac G5 (pre-isight). Using Tiger. Recently it has been playing up. Two main problems: starting up and waking after sleep mode.
*Starting up issues*
There doesnt seem to be a consistent problem here. Sometimes it hangs on the grey apple screen, sometimes grey probitory sign screen. Sometimes it hangs on a black screen with white writing. On about the 10th to 20th time of rebooting, it seems to startup and work fine.
*Sleep issues*
If I leave the computer to go into sleep mode, it tends to freeze in whatever application is open. Especially Safari.
I have tried numerous fixes. I've reset PRAM, done the SMU thing. Repaired and verified disk many times. Repaired and verified permissions. I've archived and installed and archived and erased. There's barely any software on here apart from the operating software and MS Office (legal). I'm using an apple keyboard (wired) and a wired mouse. There's no important info on here so am happy to wipe everything.
Finally i did a hardware test and received a "mass storage error" (only appeared for the extended test)...
2STF/8/3: S-ATA Bus 0 –Master
Having looked up several forums i replaced the hard drive. (Made sure it was compatible, similar size and same specs as original). Reinstalled software and got all the latest updates. Seemed to be working quite well for a day or so, although there was a few 'permissions' error which seemed easily fixed.
Today i awoke the imac and it had frozen. Back to it's old tricks. Tried restarting and got grey screens, black screens etc. Repaired permissions. Ran another hardware test and getting the same error message about mass storage!
So if it's not the hard drive, what's wrong for my imac? Is it time to just dispose it?
Thanks in advance for any ideas you may have.

The recall ended many moons ago, and it's a capacitor problem, they all need replacing, those in the power supply as well, probably.
If you are handy with a soldering gun, have steady hands and are good at repairing electronics, you can do it yourself. Look at [welovemacs.com] or [synaptech.com] for parts and advice.

Mass addition accunting entires from PO to FA

Hi
any one please help me to know what are all acunting entires created in mass addition process - from PO to FA
1) I created asset item in the asset orgainsation
2) for example the item is 'Computer laptop' - in purchasing tab - account code is - asset clearing account.
3) I entered purchase order for 'computer laptop' - the distribution account - asset clearing accounting. it is 3 way match.
4) I received the item - 'Computer laptop' - delivered it
5) same PO matched against AP invoice
6) AP invoice distribition account - showed asset clearing account - Tracked as asset is checked
7) Ran the mass addition program
8) in FA through the mass additioin- I add the new assest.
In this case - what are all accounting entires created from receipt of 'computer laptop', delivery of item, matching to AP invoice and Addition of asset. - please write the down accounting entry.
Thanks
venkatesan
Edited by: user11936275 on Jan 20, 2011 8:55 PM

Hi Vekatesan,
For Asset related invoicess , In AP
Credit Liability
Debit Asset Clearing
Mass additions will create the asset with the following entries
Debit Asset account for computer-Laptop
Credit Asset Clearing
Regards
Muthu

Loading categories to the mass additions interface

Hi,
We are doing an R12 FA implementation.
If I explain it more detail.
We have 11i , but we r going to scrap 11i and implement R12 fresh.
However the data will be extracted from 11i as it is.
As u all know we need to use either mass additions interface or the additions API. In this case we r going to use mass additions interface.For the conversion we r going to use ODI to map the data.
The isssue we are facing is, since the ODI is going to be used it will map data from 11i base tables to the mass_additions_interface table in R12. The mapping of the categories becomes a major issue in this scenario. Since we cannot load the category combinations to the interface, instead only an ID can be populated.As I told you we r populating the 11i values it will be wrong the populate it with 11i values, because in R12 we will have a new set of category IDs.
Can anyone help me to load the categories ( That exist in R12) to the mass additions interface using ODI? or is there a way using the API?
Thanks and Regards,
MPH

Hi,
I believe you need to define another table which maps the Old Category ID with New one. Use ODI to map the Data and this Temp table to Mass additions.
Regards,
Sridhar

Which table tag number is stored after running post mass additions in FA

Hi,
could any one tell me, in which table tag number is get stored after running the post mass additions program in FA (R12).

Hi,
It will be stored in fa_additions_b.
Thanks,
Vinod

Undelete in Mass Additions Queue=Delete

My business user inadvertently deleted all AP transactions from Mass Additions using Tools==>Delete All. The transactions were in queue 'New' but now are in queue 'delete'. Is there a way to put them in the 'New' queue again. No post process has happened as of yet. The trasactions were sent by AP using Mass Additions process.
Thanks in Advance!
mtm

Hi,
We could find the work around for deletion of assets which are in POST Status.
We edited the Description of the Asset and saved it again.This way it allowed to Delete the Mass additions which got stuck with POST status.
Thanks

SQL database login for 'SharePoint_Config_2010' on instance 'DB server' failed. Additional error information from SQL Server is included below.

we formatted Database server and restored all the databases from the backup. but the sharepoint site is giving below error when i access the home page.
we have 3 application servers in that two are working fine, but only one server getting the below error.
SQL database login for 'SharePoint_Config_2010' on instance 'db server' failed. Additional error information from SQL Server is included below.
Login failed for user 'domain\user'.
could you help what is the issue?

Hi,
According to your post, my understanding is that you failed to access sharepoint site with one application server.
It was due to the MOM/SCOM Agent that has a SharePoint management pack installed, the agents Windows Service runs as ‘Local System’ and thus causes this.
The workaround is to either kill the SCOM agent service, or set it to run as a dedicated service account.
In addtion, I recommend to add the logon account of the SharePoint Timer service as a user of the SharePoint_Config database. Give role membership to the account db_owner.
You also need to add the SharePoint accounts back into sql server.
There are some similar articles for you to take a look at:
http://blog.blksthl.com/2012/04/26/login-for-sharepoint_config-login-failed-for-user-domaincomputername-scom-agent/
http://msdn.microsoft.com/en-us/library/jj551781(v=nav.70).aspx
http://sharepoint.stackexchange.com/questions/51623/moved-sql-databases-for-sharepoint-2010-and-now-have-a-3351-error
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Event 3351, SQL database login for 'DB_Config' on instance failed. Additional error information from SQL server is mentioned below. Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.

category-database
event id-3351
source-sharepoint foundation
SQL database login for 'DB_Config' on instance 'DB\instance' failed. Additional error information from SQL Server is included below:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'.
I have been getting this error every hour on only 1 application server of the 2.
My farm consists of 2 app servers, 2 wfes & 2 sql nodes.
My public site is working fine. Authentication is NTLM.
SharePoint VSS Writer is disabled.None of my appPool accounts are running under local system.
I have read many forums/blogs, but couldnt find a solution for this.
Any help would be appreciated!

Hi,
As I understand, you found event id 3351 in event log. Please collect more information as below：
Check if the error also occurs on other servers in your farm.
Check if backup job is scheduled at the time when the event id occurs.
Please run Config Wizard or psconfig.exe -cmd secureresources on all servers and test the issue again.
Regards,
Rebecca Tu
TechNet Community Support

Life in months is not populating from interface in Mass Additions Post

Hi,
We have one critical issue in FA conversion.We have popultaed the life_in_months in fa_mass_additions table.When we run the Mass Additions Post,it is defaulting the life_in_months from category and not from fa_mass_additions interface table.As per intended functionality,it should populate from interface table.
If any of you encounter the issue,Please let me know the soultinon.
Thnaks
Praveen

>
DATA showing on front end,but it is not populating into base table AP_INVOICE_DISTRIBUTIONS_ALL.
>
Are you saying you can see the distributions from front end but not in the table?
Did you populate the distribution related columns in AP_INVOICE_LINES_INTERFACE (e.g. DIST_CODE_COMBINATION_ID)?
Sandeep Gandhi

Date in service - AP to FA Mass addition

Hi
In R12, when we ran the AP to FA Mass addition and querying mass addition in FA, system is showing new assets with date in service as the date on which Mass addition was run. Is that the intended functionality..?
Can we change the date in service as invoice date by default through mass addition program..?
regards
Ahsan

Please check in KON* series table in SE16N transaction. I guess KOHN table may help you out. You can see other similar tables.
In any one of the table you will find validity data.

Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.

Log Name:      Application
Source:        Microsoft-SharePoint Products-SharePoint Foundation
Event ID:      5586
Task Category: Database
Level:         Error
Keywords:
User:          DOMAIN\SA account
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
This is the error, if often find in my WFE's. I googled for the error and granted DB owner roles for the service account as specified in TechNet, but no luck.
Even same error logs generated on SharePoint logs.
SqlError: 'The target principal name is incorrect. Cannot generate SSPI context.'
Source: '.Net SqlClient Data Provider' Number: 0 State: 0 Class: 11 Procedure: 'GenClientContext' LineNumber: 0 Server: 'servername\SHAREPOINT,4101'
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
System.Data.SqlClient.SqlException (0x80131904): The target principal name is incorrect.
Cannot generate SSPI context.     at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions
userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnecti...
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
Thanks.
Badri

For SharePoint to recognize the SQL server name we provide its name and instance while installing SharePoint. When we are using SQL alias to connect to SQL, we need to configure the same alias on SharePoint server so that SharePoint recognize alias over
the network.
Having SharePoint connect to a SQL Alias instead of the NetBIOS name is always a good idea. The main benefit is, if you ever have to switch the SQL Server or connect to a SQL Cluster VIP address, you just change the Alias to point to the SQL Cluster name
on the SharePoint Server and restart the SharePoint Timer Service and you are good to go.
Please check this blog.
http://blogs.msdn.com/b/priyo/archive/2013/09/13/sql-alias-for-sharepoint.aspx
http://technet.microsoft.com/en-us/library/hh292622(v=office.15).aspx
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered.

Additional error handling within a production application using SQLERRM

I have an application that is already in production. What I would like to do is to add additional error detail currently captured within the SQLERRM. I would like to capture detail such as: where the error occurred ie. what procedure in which package attempting to insert in which table etc. etc. Is this something that I can do easily without writing hundreds of exceptions into the existing code? Please respond if you know of a way to do this.
Thanks in advance

Probably not, unfortunately. To get that level of detail, you would need to go in to every procedure and add appropriate exception handlers, state variables (so you know what table you were inserting into). Adding error handling into any application after it is "done" is going to require some heavy lifting.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Mass Additions Errors

Similar Messages

Maybe you are looking for