Mass Additions Interface - cannot open prepare mass additions

Hi ,
We have loaded assets details to Mass Additions Interface using ODI, but we cannot open the prepare mass additions window in the applcations.
When I checked it has all the details when compaired with an asset loaded to the interface with WebADi EXCEPT the MASS_ADDITION_ID,( CAN IT BE THE ISSUE)
what could have been the reason for this type of thing?
Thanks and Regards,
MPH

Hi,
I believe you need to define another table which maps the Old Category ID with New one. Use ODI to map the Data and this Temp table to Mass additions.
Regards,
Sridhar

Similar Messages

HT204382 MAC PRO10.6.8 just downloaded file sent 5/2010 "BoogieWoogie" (4-wmv) I could play it then, but now it says I cannot open because its not in a format that Quicktime Player understands that I have to install addit'l software to open this type of

MAC PRO10.6.8 just downloaded file sent 5/2010 "BoogieWoogie" (1-wmv) I could play it then, but now it says I cannot open because its not in a format that Quicktime Player understands that I have to install addit'l software to open this type of file??? WHAT software and WHERE do I find it to download?
calico6

Free VLC player for the Mac, check out the Icecast Radio Directory also
http://www.videolan.org/vlc/download-macosx.html
And if it's copy protected then
http://www.telestream.net/flip4mac/
If anyone is running 10.8. or later, then they might have to right or control click on the installer or app to "Open" to bypass Gatekeeper controls at least once, then it learns it's a ok to be trusted program.

Just reinstalled CS6 Masters Collection and now I get the cloud interface and cannot open adobe premiere

Just reinstalled CS6 Masters Collection, due to a PC infection that required reinstalling everything, I deactivated the previous install before formatting the hard drive for the fresh install of windows 7 and all the other programs. Now I get the cloud interface that opens every time I boot the PC and cannot find any of the programs that are apart of the CS6 Master collection. I can download some of them but the only one that stays on my PC is Photoshop and I cannot download or open adobe CS6 premiere Pro, Encore opens instead. What the heck?

lrfrustrated wrote:
I just downloaded Adobe XI onto my macbook air and now I cannot save or print any PDF files. Will not let me do Print-Save as PDF, and if i do Save as i get a message saying that the file is corrupted. I had NO PROBLEMS at all doing this many times until i downloaded the new version. I have uninstalled and reinstalled, to no avail. I am super frustrated.
Print>Save as PDF - uses Preview (part of OS X), so Adobe Reader should have no effect on that at all.
As to the "damaged file" error, simply uninstalling the Reader app won't affect it. Do the following:
Mac HD/Library/Internet Plug-ins
Trash the AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin files
Mac HD/Applications
Trash the Adobe Reader app
[user]/Library/Preferences
Trash the com.adobe.Reader.plist file
To access the [user]/Library, hold the "Option" key and click "Go" from the FInder menu.
Mac HD/Library/Application Support/Adobe
Trash the Reader folder (the whole folder)
Empty the Trash.
Download the FULL installer here: http://get.adobe.com/reader/enterprise/
Quit your browser and reinstall Reader.
Launch it from the Applications folder and accept the license agreement.
You should have no problems downloading PDFs with Safari.
Unfortunately, ANY PDF that says it's damaged.... is. You'll have to trash them.

Cannot open mailbox system attendand- randomly

Hello,
our environment have Exchange 2013 with CU7 installed, and lately receive weird problem that is not persistent but it unexplained.
All databases mounted that are in DAG, all arbitration mailboxes good, in ADSIEDIT checked homeMDB, and it is not set, however, i dont know is this relevant because sometimes is failing, sometimes is success.
When we run user creation we randomly get error:
Cannot open mailbox /o=ORGANIZATION/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SERVER/cn=Microsoft System Attendant. CategoryInfo: NotSpecified: (:) [Set-MailboxRegionalConfiguration],
MailboxUnavailableException, FullyQualifiedErrorId: [Server=SERVER,RequestId=ba479b62-bda0-4c55-9347-9279f6121d62,TimeStamp=3/18/2015 7:57:29 PM] [FailureCategory=Cmdlet-MailboxUnavailableException] 45AC6FDA,Microsoft.Exchange.Management.StoreTasks.SetMailboxRegionalConfiguration
Googled many answers, tried many workarounds, and I'm out of ideas now, so any suggestion will be more than welcome!
Thanks,
Ivica

Well, i would do that, except that Exchange 2013 don't have System attendant service.
Also, we have 6 databases, how do i know which one to put in homeMDB field?
I did as you instructed anyway for test and still receive error:
<?xml version="1.0"?>
<Objects>
<Object Type="System.Management.Automation.PSCustomObject">
    <Property Name="message" Type="System.String">Can't create user</Property>
    <Property Name="detailMessage" Type="System.String">Cannot open mailbox /o=secureemail/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=SERVER/cn=Microsoft System Attendant. CategoryInfo:
NotSpecified: (:) [Set-MailboxRegionalConfiguration], StorageTransientException, FullyQualifiedErrorId: [Server=SERVER,RequestId=557e3eb8-ddbb-44c9aab1-d18c0682beb5,TimeStamp=3/19/2015 2:45:32 PM] [FailureCategory=Cmdlet-StorageTransientException] 2CC71ED6,Microsoft.Excha
nge.Management.StoreTasks.SetMailboxRegionalConfiguration</Property>
    <Property Name="responseCode" Type="System.String">400</Property>
</Object>
</Objects>
Keep in mind that servers are in remote AD sites, replication and AD health is good!
This is script that is failing:
$ErrorActionPreference = "Stop";
try{
Add-PSSnapin Microsoft.Exchange.Management.PowerShell.SnapIn
$OrganizationName = "[email protected]" #User defined mail address
$organizationUnit = "OU=$OrganizationName,OU=users,DC=domain,DC=priv";
$name = "John"
#this should be asked in web interface (firstname)
$lastname = "Dpe"
#this should be asked in web interface (lastname)
$displayName = "John Doe" # this is display name in OWA and in all address books
$logonName = "john"    # this will be users choosen logon name (before @externaldomain.com)
$ExternalDomain = "example.com"        #this value user will enter as his wanted username and will use it together with his external domain name [email protected]
$UPN = "$LogonName@$ExternalDomain"   #this should remain to be done automatically and under assumption domain is provisioned!!
$DomainController = "server"   #this value must be specified based on domain controller in AD site where user will be created
$nonadmin = "$OrganizationName All Users"; #This is field for entire tenant management and members are used for calendar sharing
$database = "database"
$retentionPolicy = "DoNotRemove"
$customattribute1 = "$OrganizationName" #Add for possible manipulation of tenants for future need
$customattribute2 = "ServiceID"
$customattribute3 = "ContactID"
$customattribute4 = "ClientID"
$password =ConvertTo-SecureString 'Password123' -AsPlainText -Force
$mailbox = New-Mailbox -DomainController "$DomainController" -RetentionPolicy $retentionPolicy -UserPrincipalName $UPN -Name "$name $lastname" -OrganizationalUnit "$organizationUnit" -Password $password -FirstName "$name"
-LastName "$lastname" -Displayname "$Displayname" -database $database -ResetPasswordOnNextLogon $false #This is part where user is created
Start-Sleep -s 2;
Add-DistributionGroupMember -Identity "$nonadmin" -Member "$UPN" -BypassSecurityGroupManagerCheck -DomainController "$DomainController"      #at this line user is placed in distribution group and
that group is used for additional security
Start-Sleep -s 2;
Set-Mailbox -AddressBookPolicy "$OrganizationName ABP" -Identity "$UPN" -DomainController "$DomainController" #from this point user gets his address book and isolation part.
Set-Mailbox -Identity "$UPN" -DomainController "$DomainController" -EmailAddressPolicyEnabled:$False #disables force of address policy
Set-Mailbox -identity "$UPN" -PrimarySmtpAddress $UPN -DomainController "$DomainController" ; #assigns default mail address
Start-Sleep -s 2;
Set-CASMailbox -identity "$UPN" -OwaMailboxPolicy Default -DomainController "$DomainController" #In this policy it is defined that user cant manage his password, as any future change will be managed globally here and automatically
applied to all users
Set-MailboxRegionalConfiguration -Identity "$UPN" -Language en-us -DomainController "$DomainController" -Confirm:$False
Set-MailboxFolderPermission -identity ${UPN}:\calendar -User default -accessrights none -DomainController "$DomainController"
add-MailboxFolderPermission -Identity ${UPN}:\calendar -user "$nonadmin" -AccessRights AvailabilityOnly -DomainController "$DomainController"    #only members of classic users can see free/busy
set-mailbox -identity $UPN -customattribute1 $customattribute1 -customattribute2 $customattribute2 -customattribute3 $customattribute3 -customattribute4 $customattribute4 -DomainController "$DomainController"
$mailbox | Set-CasMailbox -DomainController "$DomainController" -ActiveSyncEnabled $true -PopEnabled $true -ImapEnabled $true -OWAEnabled $true -MAPIEnabled $true; #adding script for created user to be returned after creation

Encore CS3 cannot open CS2 project: folder cannot be found

I created a project in Encore CS2 under Win XP, and when I try to open it in CS3 under Vista, I get an error of
Cannot open project; The folder for this project cannot be found.
Disregarding the fact that I haven't changed, moved or deleted any subfolders or files and the drive has the same letter and label as before, why the heck doesn't Encore at least give me the opportunity to direct it to the correct folder? I can do this easily in almost all other applications, like InDesign or Dreamweaver. Shouldn't this error have come up in the first few days of beta testing? (Uh, it
was beta tested.....right?)
I tried looking in the ProjectPrefs and ProjectWorkspace xml files, but they don't have any folder info. Searches in the knowledge base, forums and newsgroups have turned up nothing. It seems my only choice here is to recreate the fracking project from scratch!

>(Uh, it was beta tested.....right?)
No. It wasn't. The Encore team is so good at coding and spell-checking that the Product Manager and the Director of the Production Studio project both felt that beta testing was not necessary this time around.
It's really pretty impressive that so few bugs have turned up in real-world use considering that both internal and external beta testing was shelved for this release. The additional resources that would have been used to test the app were sent to the Photoshop team to ensure that the CS3 release of PS was flawless.

Cannot open document (Error: INF)

We have migrated reports from version Business Objects 6.5.1 to Business Objects XI 3.1 SP2. We have been receiving sporadic 'Cannot open document (Error: INF)' now and again whenever you open Desktop Intelligence reports using Infoview. Have any other users come across this issue using BOXI 3.1 SP2. I do not believe that this issue occurred on SP1.
This error is very frustrating.
I have browsed various forums and implemented changes which have had no effect whatsoever including the SAP Marketplace.
We are also receiving SetPrompts Failed errors. When a report is opened in Infoview and you refresh a report, a blank dialog appears with a red cross. if you refresh the report again then the SetPrompts Failed error appears. I have evene made changes according to article 1364437 based on this error and this has not resolved the issue.
Regards
Dipendra

We're on BOXI3.1 SP2 aswell and we have had the same sporadic issue - Cannot open document for Deski reports. This is causing some serious concern amongst our users over system stability.
You can recreate the situation by shutting down the InputFileRepository server and you get the same message. I've noticed that when this happens there is a mesage in the fcproc log file 'm_repFileMgr.Download failed'
My theory is that there may be some congestion in linking between the desktopintelligence server and the inputfilerepository. In addition, we had some logging on the fileserver and at the time of the error there was no mention of the report that failed or any error. We contacted SAP about this but did not get a satisfactory response. There were some heavily utilised DESKi reports which we managed to convert to Webi to take the load off and we also dropped the timeout to 20 minutes (not brilliant but it did mean that if we got the message the users wouldn't have to wait too long before it was resolved in case they couldn't get hold of IT).
I also upped the parameter for Maximum Retries for File Access in case it was having problems getting the file.
The result of this was that the error appeared to go away... until yesterday!!!
Any further insights welcome.

Cannot open an Excel 2010 workbook by using Internet Explorer 8.0 in sharepoint 2010

When am trying to open a Microsoft Office Excel 2010 workbook from a Web site by browsing to the location with Microsoft Internet Explorer 8.0, you cannot open the file. Instead, you receive the following messages:
Some files can harm your computer. If the file information below looks suspicious, or you do not fully trust the source, do not open this file.
Would you like to open the file or save it to your computer?
If you click Open, you receive the following error message:
Could not open 'http[s]://<var>Server_name</var>/<var>File_path</var>/<var>File_name</var>.xls'.
After you click OK, you receive the following error message:
Microsoft Excel cannot access the file 'http[s]://<var>Server_name</var>/<var>File_path</var>/<var>File_name</var>.xls' There are several possible reasons:
The file name or path name does not exist.
The file you're trying to open is being used by another program. Close the document in the other program, and try again.
The name of the workbook you're trying to save is the same as the name of another document that is read-only. Try saving the workbook with a different name.
Ramesh

Hi Ramesh,
Please install the hotfix package and test the issue again:
http://support.microsoft.com/kb/2817576/en-us
In addition, try uncheck the option “confirm open after download” per:
http://jritmeijer.wordpress.com/2006/08/20/some-files-can-harm-your-computer-if-the-file-information-looks-suspicious-or-you-do-not-fully-trust-the-source-do-not-open-the-file/
Regards,
Rebecca Tu
TechNet Community Support

Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)

Fresh installation of Exchange Server 2013 on Windows Server 2012.
Our first test account cannot access their email via Outlook but can access fine through OWA. The following message appears - "Cannot open your default e-mail folders. You must connect to Microsoft Exchange with the current profile before you can synchronize
your folders with your Outlook data file (.ost)" is displayed.
If I turn off cached Exchange mode, setting the email account to not
cache does not resolve the issue and i get a new error message - "Cannot open your default e-mail folders. The file (path\profile name).ost is not an Outlook data file (.ost). Very odd since it creates its own .ost file when you run it for the first
time.
I cleared the appdata local Outlook folder and I tested on a new laptop that has never connected to Outlook, same error message on any system.
Microsoft Exchange RPC Client Access service is running.
No warning, error or critical messages in the eventlog, it's like the healthiest server alive.
Any help would be greatly appreciated. I haven't encountered this issue with previous versions of Exchange.

So it looks like a lot of people are having this issue and seeing how Exchange 2013 is still new (relatively to the world) there isn't much data around to answer this. I've spend ALOT of time trying to figure this out.
Here is the answer. :) - No I don't know all but I'm going to try to give you the most reasonable answer to this issue, in a most logical way.
First thing I did when I was troubleshooting this issue is that I ignored Martina Miskovic's suggestion for Step4 http://technet.microsoft.com/library/jj218640(EXCHG.150)because it didn't make sense to me because I was trying to connect
Outlook not outside the LAN but actually inside. However, Martina's suggestion does fix the issue if it's applied in the correct context.
This is where the plot thickens (it's stew). She failed to mention that things like SSL (which I configure practically useless - anyone who ever worked in a business environment where the owner pretty much trusts anyone in the company, otherwise they don't
work there - very good business practice in my eyes btw, can confirm that...) are some sort of fetish with Microsoft lately. Exchange 2013 was no exception.
In exchange 2003, exchange 2007 and exchange 2010 - you could install it and then go to outlook and set it up. And when outlook manual Microsoft Exchange profile would ask you for server name, you would give it and give the name of the person who you setting
up - as long as machine is on the domain, not much more is needed. IT JUST WORKS! :) What a concept, if the person already on premises of the business - GIVE HIM ACCESS. I guess that was too logical for Microsoft. Now if you're off premises you can use things
like OutlookAnywhere - which I might add had their place under that scenario.
In Exchange 2013, the world changed. Ofcourse Microsoft doesn't feel like telling it in a plain english to people - I'm sure there is an article somewhere but I didn't find it. Exchange 2013 does not support direct configuration of Outlook like all of it's
previous versions. Did you jaw drop? Mine did when I realized it. So now when you are asked for your server name in manual outlook set up and you give it Exchange2013.yourdomain.local - it says cannot connect to it. This happens because ALL - INTERNAL AND
EXTERNAL connection are now handled via OutlookAnywhere. You can't even disable that feature and have it function the reasonable way.
So now the question still remains - how do you configure outlook. Well under server properties there is this nice section called Outlook anywhere. You have a chance to configure it's External and Internal address. This is another thing that should be logical
but it didn't work that way for me. When I configured the external address different from the internal - it didn't work. So I strongly suggest you get it working with the same internal address first and then ponder how you want to make it work for the outside
users.
Now that you have this set up you have to go to virtual directories and configure the external and internal address there - this is actually what the Step 4 that Martina was refering to has you do.
Both external and internal address are now the same and you think you can configure your outlook manually - think again. One of the most lovely features of Outlook Anywhere, and the reason why I had never used it in the past is that it requires a TRUSTED
certificate.
See so it's not that exchange 2013 requires a trusted certificate - it's that exchange 2013 lacks the feature that was there since Windows 2000 and Exchange 5.5.
So it's time for you to install an Active Direction Certificate Authority. Refer to this wonderful article for exact steps - http://careexchange.in/how-to-install-certificate-authority-on-windows-server-2012/
Now even after you do that - it won't work because you have to add the base private key certificate, which you can download now from your internal certsrv site, to Default Domain Policy (AND yes some people claim NEVER mess with the Default Domain Policy,
always make an addition one... it's up to you - I don't see direct harm if you know what you want to accomplish) see this: http://technet.microsoft.com/en-us/library/cc738131%28v=ws.10%29.aspx if you want to know exact steps.
This is the moment of ZEN! :) Do you feel the excitement? After all it is your first time. Before we get too excited lets first request and then install the certificate to actual Exchange via the gui and assign it to all the services you can (IIS, SMTP and
there is a 3rd - I forgot, but you get the idea).
Now go to your client machine where you have the outlook open, browse to your exchange server via https://exchang2013/ in IE and if you don't get any certificate errors - it's good. If you do run on hte client and the server: gpupdate /force This will refresh
the policy. Don't try to manually install the certificate from Exchange's website on the client. If you wanna do something manually to it to the base certificate from the private key but if you added it to the domain policy you shouldn't have to do it.
Basically the idea is to make sure you have CA and that CA allows you to browse to exchange and you get no cert error and you can look at the cert and see that's from a domain CA.
NOW, you can configure your outlook. EASY grasshoppa - not the manual way. WHY? Cause the automatic way will now work. :) Let it discover that exachange and populate it all - and tell you I'm happy! :)
Open Outlook - BOOM! It works... Was it as good for you as it was for me?
You may ask, why can't I just configure it by manual - you CAN. It's just a nightmare. Go ahead and open the settings of the account that got auto configed... How do you like that server name? It should read something like [email protected]
and if you go to advanced and then connection tab - you'll see Outlook Anywhere is checked as well. Look at the settings - there is the name of the server, FQDN I might add. It's there in 2 places and one has that Mtdd-something:Exchange2013.yourdomain.local.
So what is that GUID in the server name and where does it come from. It's the identity of the user's mailbox so for every user that setting will be different but you can figure it out via the console on the Exchange server itself - if you wish.
Also a note, if your SSL certs have any trouble - it will just act like outlook can't connect to the exchange server even though it just declines the connection cause the cert/cert authority is not trusted.
So in short Outlook Anywhere is EVERYWHERE! And it has barely any gui or config and you just supposed to magically know that kind of generic error messages mean what... Server names are now GUIDs of the [email protected] - THAT MAKES PERFECT
SENSE MICROSOFT! ...and you have to manage certs... and the only place where you gonna find the name of the server is inside the d*** Outlook Anywhere settings in the config tab, un it's own config button - CAN WE PUT THE CONFIG ANY FURTHER!
Frustrating beyond reason - that should be Exchange's new slogan...
Hope this will help people in the future and won't get delete because it's bad PR for Microsoft.
PS
ALSO if you want to pick a fight with me about how SSL is more secure... I don't wanna hear it - go somewhere else...

After i downloaded Firefox 7, I cannot open more than one page at a time. I have done everything you suggested about ad-on, etc. Other people are having problems. Can I get reall help with this or should I just reload Firefox 4?

Firefox 7 is a dud. Cannot open more than one tab at a time, will not open additional pages. Nothing you suggested has worked.
Can I take down Firefox 7 and reload Firefox 4?
I need to talk with a live person! I am real disappointed with this.

Sorry there is no telephone support. You could try the IRC if you want a quick response, ( whilst it is [https://support.mozilla.com/en-US/kb/ask open] )
Firefox 4 is not supported, but firefox 3.6 is
* see [[installing a previous version of firefox]]
There is a change to a preference which may help, post back with more details of your problems please.

The Microsoft Access database engine cannot open or write to the file \\fileserver\db\access.mdb

Hi,
I have Windows Server 2012 with SQL 2012 Standard SP1. I am using linked server, and Access Database Engine 2010 Redistributable to access my database file made in Microsoft Access (.mdb) from network file server.
EXEC master.dbo.sp_addlinkedserver @server = N'MyLinkedServer', @srvproduct=N'MyLinkedServer', @provider=N'Microsoft.ACE.OLEDB.12.0', @datasrc=N'\\myfileserver.mydomain.com\files\mydatabase.mdb'
My SQL service is running with domain service account MYDOMAIN\SQL1$ , i have added Full control for file share and NTFS permission on my file server folder (C:\Files).
When I open (as domain admin with UAC elevated permissions) on my DB server SQL Management studio, I can browse tables and everything works.
The problem is, if I open SQL management studio (as domain admin with UAC elevated permissions) on my File server or any other computer, when trying to browse my linked server i got error:
TITLE: Microsoft SQL Server Management Studio
Failed to retrieve data for this request. (Microsoft.SqlServer.Management.Sdk.Sfc)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
ADDITIONAL INFORMATION:
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
Cannot initialize the data source object of OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "Synesis_3PRO2013". (Microsoft SQL Server, Error: 7303)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=11.00.3000&EvtSrc=MSSQLServer&EvtID=7303&LinkId=20476
When I try to place simlpe Select SQL query I got error:
OLE DB provider "Microsoft.ACE.OLEDB.12.0" for linked server "MyLinkedServer" returned message "The Microsoft Access database engine cannot open or write to the file '\\myfileserver.mydomain.com\files\mydatabase.mdb'. It is already opened exclusively by another
user, or you need permission to view and write its data.".
I do not have any other program using my access database, and user has full control. I am trying to use in security mode - "For a login not defined in the list above, connections will be made without using a security context", i have also tried all four options.
I am confused becouse it works from SQL server but from any SQL client domain member computer/server it does not work.
I have same problem in another environment where I have Windows Server 2008 R2 and SQL 2008 R2 SP2.
Please help.
-- Hrvoje Kusulja

NTFS must be fine since it works from same server using same accounts.
As I understand, adding my access file to Access trusted location could be a problem. I have tried now to add my access database file location to trusted locations for user which is my SQL service user (Windows Service - AD managed service account MYDOMAIN\SQL1$)
and my test user which I use to connect to sql server as a client from sql management studio. (Account is Domain Admins and have full permissions on SQL server also)
I have added this .reg:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security]
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security\Trusted Documents]
"LastPurgeTime"=dword:01592874
"DisablePromptOpenNetworkTrustedDocuments"=dword:00000000
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security\Trusted Locations]
"AllowNetworkLocations"=dword:00000001
[HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Access\Security\Trusted Locations\Location0]
"Description"="My file server"
"AllowSubFolders"=dword:00000001
"Path"="\\\\myfileserver.mydomain.com\\files\\"
I have done this for SQL service account user and my personal test account as I said. I have tried to logoff and restart sql service and all servers also.
The same problem still persists.
Anyway, thank you for giving me a hint.

HT3775 I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. I get this error message: The document "ANDREW_McD_MEDIA_VERSION.avi" could not be opened. A required codec isn't available.

I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. These same files opened up with no problem prior to my upgrade. Additionally, I had upgraded to the Pro version of Quicktime recently, but it appears I've retrograded back to the basic version, unexplainably.
I get this error message: The document “ANDREW_McD_MEDIA_VERSION.avi” could not be opened. A required codec isn't available.

Hi,
I had exactly the same problem & found the answer here https://discussions.apple.com/thread/3219982?start=0&tstart=0 . Download a program called Perian, very easy to download worked a treat. I wish all fixes were this easy - Debbie

Safari cannot open the page because the server cannot be found (Cellular Data)

Hi there.
I'm having some trouble loading a website (that I've built) from Safari on my iPhone via cellular/4G, as the topic states, it comes up with the error:
Safari cannot open the page because the server cannot be found
All other websites load normally, it just seems to be my specific site that won't load.
The website opens in Safari on my phone if I'm connected to wifi but it doesn't load when using cellular data. It opens from computers and I've tested it on different phones/networks (for instance, it works in Chrome on a friends Samsung Galaxy Ace 3 using EE 4G). I have an iPhone 6 with iOS 8.1.2. I'm on EE 4GEE.
I think it might be something to do with DNS either from EE's side, or the DNS settings I've used in cPanel for the website...
Any thoughts / suggestions on how I can fix this issue?
Thank you in advance for your help!
Rob.

Thanks for the update. You might also consider using iTunes and Internet Radio:
Not all radio stations are available though, since they want you to see advertisements in addition to listening to them

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? thank you

I cannot open a .pdf in an incoming mail (Outlook 2010) with Acrobat Pro XI. It will only allow "preview". I have to copy and paste the .pdf to my desktop and then open it. What do I do to restore the 2x click in Outlook to open the .pdf? As of now, I get the following bracket opening on screen when I click on the Acrobat icon for attachment within the email: Thank you
Adobe Acrobat has stopped working
Windows can check online for a solution to the problem.
-Check online for a solution and close the program
-Close the program
Problem signature:
Problem Event Name:                        APPCRASH
Application Name:                             Acrobat.exe
Application Version:                           11.0.7.79
Application Timestamp:                     536b812b
Fault Module Name:                          Acrobat.dll
Fault Module Version:                        11.0.7.79
Fault Module Timestamp:                  536b80ff
Exception Code:                                  c0000005
Exception Offset:                                00cbf281
OS Version:                                          6.1.7601.2.1.0.256.48
Locale ID:                                             1033
Additional Information 1:                  0a9e
Additional Information 2:                  0a9e372d3b4ad19135b953a78882e789
Additional Information 3:                  0a9e
Additional Information 4:                  0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave

Cannot open .pdf created by InDesign CS6, can open all other .pdfs

I just got InDesign CS6 at work (I use CC at home, but my company could not afford the CC subscription). I'm on PC with the minimum specs for InDesign and Photoshop Elements (also just installed). I have never been able to print to .pdf from InDesign; the program hangs. I have been doing Export to .pdf, press quality with my printer's specs. This has been working fine, except that, on occasion, I have to export the .pdf a few times to get it to open; it will give me an "either not a supported file or damaged" error message. Up until today, I have been able to export 2-3 times and would always get a .pdf that would open.
As of today, I cannot open any .pdf at all; I get that same "not supported or damaged" error message. However, if I let my computer sit idle for about 30 minutes, it will open. In addition, after exporting, InDesign hangs on a background task of "Export " 5" and I have to close out of that task to do anything further in the program.
I have read the forums on these issues and done what I can: I have installed all updates, backsaved to earlier Acrobat versions, exported to .idml, etc. Nothing helps.
I will confess that I am not the most technically-savvy person by any means. My company is small and does not have an IT person, nor is there a budget for calling someone in, so it is up to me and my admittedly limited understanding of this software to fix this issue.
Help?

You may have shown me part of the problem. I can't share one of the files I'm working on, as they're full of images and we have client protections that make sharing problematic, but I did try to recreate a new file with garbage text and graphics and that .pdf opened without any problem.
Could this be a file size issue? The files I'm working on are only 8,900 kb and 200 kb. That doesn't seem too large to me, but perhaps it's enough to cause a problem on my machine.

I just downloaded the trial version of Photoshop CS6. And cannot open adobe eps files ?

I have installed Photoshop CS6 and cannot open adobe eps files? any Ideas

Hi there
When you say that you can't open eps files, are you getting an error message?
Photoshop CS6 has the ability to open both .eps and .ai files. However, opening by going to File > Open... will rasterize the image - meaning that it is no long a vector so you can't scale it up and down without losing quality. To open an .eps or .ai file in Photoshop and maintain its vector capabilities, try the following:
Create a new canvas in Photoshop. Then, go to File > Place...
After selecting your file from the Place dialog box, your image will be placed into your canvas. Resize accordingly, and then hit Enter on your keyboard.
The image you just placed is a Smart Object, meaning that it has retained its vector capabilities and can be resized without losing image quality. If you ever need to rasterized this image, just right click on the layer and select Rasterize Layer.
If you are still having trouble, please post here again so that we can provide additional assistance.
Cheers!
Kendall

Mass Additions Interface - cannot open prepare mass additions

Similar Messages

Maybe you are looking for