Mass Agent Deployment

Can I download and install Mass Agent Deployment 10.2.0.4 on my target host instead of install agent 10.2.0.2 then upgrade agent to 10.2.0.4?
any diffrence?
Thanks.

if the agent is available for your platform for mass agent deployment (http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html) then this is possible.
Best regards,
Martin
www.ora-solutions.net

Similar Messages

Mass Agent Deployment, fails when install

After trying to install, sometimes not only one, the Mass Agent Deployment, release 10.1.0.3, in Linux RED HAT 3 ES/AS, when trying to run runInstaller, I have ever the same response, 'TMP directory is full or cannot write files in Orainst<timestamp> directory, needing 60 MB of free space.
I have 16 GB of free space.
Any help?
thanks in advanced.
regards.

I solved it by doing following steps on the OMS server:
# unzip <OMS_HOME>/agent_download/10.2.0.1.0/hpunix/prereqs/prereq_hpunix.jar
# cd /oracle/product/oms10g/sysman/agent_download/
# cd 10.2.0.1.0/hpunix/prereqs/prereqs/agent
# vi oui_refhost.xml
In this file replace the <PACKAGE VALUE= lines for something you have already installed, I used the secure shell package, which you must have installed to use agent deployment:
<OPERATING_SYSTEM>
<VERSION VALUE="B.11.11"/>
<ARCHITECTURE VALUE="PA_RISC2.0"/>
<NAME VALUE="HP-UX"/>
<VENDOR VALUE="HP Corp"/>
<PACKAGES>
<PACKAGE VALUE="T1471AA" VERSION="0.0" />
<PACKAGE VALUE="Secure_Shell" VERSION="0.0" />
</PACKAGES>
# zip -r prereqs.zip META-INF
# zip -r prereqs.zip prereqs
# mv prereqs.zip prereq_hpunix.jar
After doing this retry the procedure.

Update:: New OTN Mass Agent Deployment page

Hello Everyone,
We have been seeing lot of customers downloading wrong Agent software from the OTN for the respective platforms and then in turn the installation fails.
So we have revamped the OTN mass agent deployment page and came up with new page(http://www.oracle.com/wocportal/page/wocprod/ver-DRAFT/ocom/technology/software/products/oem/htdocs/agent/test-otn_0.html), which is Live now.
The new page classifies the Agent software based on the platforms names (32 / 64 bit) and further classifies based on the Agent releases.
This will leave us with no gap of downloading the wrong agent software for a 32 or 64 bit platform.
Thanks and Regards
Akanksha

I don't know if it is possible to uninstall the agent from the GUI. We don't have the provisioning pack. I guess it may be possible to create a job that would run the installer in silent mode to do an un-install. We have just done them interactively on the target server - going under agent_home/oui/bin & running the installer. Then if there is anything left over from the agent_home, after the installer updates the central inventory file.
If run the install interactively on the target server, you should get a meaningful error message. I would guess that it sees that the agent already exists from the inventory. You could try launching the installer from the oracle server software home & then remove the "orphaned" agent home.
Thanks,
Brian

Oracle Enterprise Manager Agent deployment (Installation and Configuration) Error

Hello,
I am trying to create an agent on a linux server using Oracle Enterprise Manager 12.1.0.3. The user is created with root privilege on the server, by change /etc/sudoers entry username the same as the root entry. After that I tried to add host target by clicking Setup->Add Target->Add target Manually->Add Host Targets in the Oracle Enterprise Manager.
In the Add Target view: I clicked on add, then I entry host and platform information. After that I click next. Then I provided the Linux x86-64 : Installation Details for
Installation Base Directory, Instance Directory, Name Credential ... then click next. then click Deploy Agent.
In the Add Host Status view: stages Initialization and Remote Prerequisite Check successfully passed, but in the stage Agent Deployment, it failed in the Installation and Configuration phrase of the Agent Deployment stage.
The log content is shown below. There are numerous SEVERE Errors. But I don't have much experience in dealing with these type of problems. I thank you in advance for all the helps.
lf
WARNING: Validation of XML schema is disabled because AggregateDescriptions.xsd could not be found
INFO: Creating new CFM connection
INFO: Creating a new logger for oracle.sysman.top.agent
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/oracle.sysman.top.agent.12_1_0_3_0.xml
INFO: Creating a new logger for OuiConfigVariables
INFO: Unmarshalling /users/ncgf/em_agent/core/12.1.0.3.0/inventory/ContentsXML/ConfigXML/OuiConfigVariables.1_0_0_0_0.xml
INFO: Aggregate Description oracle.sysman.top.agent:12.1.0.3.0:common successfully loaded
INFO: Aggregate Description OuiConfigVariables:1.0.0.0.0:common successfully loaded
INFO: Successfully returning from CfmFactory.connect()
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: oracle.sysman.top.agent:IAction.perform() was called on {Action state:configuration in CfmAggregateInstance: oracle.sysman.top.agent:12.1.0.3.0:common:family=CFM:oh=/users/ncgf/em_agent/core/12.1.0.3.0:label=1}
INFO: Framework waiting for Action to complete at 15:08:10.272
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=0 stepIndex=0 microStep=0
WARNING: Skipping environment variable line: "}": oracle.sysman.emCfg.common.CfwException: A non-empty environment line must contain "=": }
WARNING: Failed to read environment variable file /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties: java.io.FileNotFoundException: /users/ncgf/em_agent/core/12.1.0.3.0/install/envVars.properties (No such file or directory)
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.agent.config.AgentConfiguration
INFO: oracle.sysman.top.agent:Classpath = /users/ncgf/em_agent/core/12.1.0.3.0/oui/jlib/srvm.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/agentConfig.jar:/users/ncgf/em_agent/core/12.1.0.3.0/jlib/emConfigInstall.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/emagentSDK.jar:/users/ncgf/em_agent/core/12.1.0.3.0/modules/oracle.http_client_11.1.1.jar:/users/ncgf/em_agent/core/12.1.0.3.0/sysman/jlib/log4j-core.jar
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration has been started
INFO: oracle.sysman.top.agent:Parametes passed to agent configuration are:
1.ORACLE_HOME=/users/ncgf/em_agent/core/12.1.0.3.0
2.AGENT_PORT=3872
3.ORACLE_HOSTNAME=nsn175-89.us.oracle.com
4.b_doDiscovery=false
5.AGENT_BASE_DIR=/users/ncgf/em_agent
6.AGENT_INSTANCE_HOME=/users/ncgf/em_agent/agent_inst
7.s_hostname=nsn175-89.us.oracle.com
8.OMS_HOST=nsn175-105.us.oracle.com
9.b_startAgent=false
10.b_secureAgent=true
11.b_chainedInstall=false
12.b_forceConfigure=false
13.EM_UPLOAD_PORT=4904
14.b_forceAgentDefaultPort=false
15.s_staticPorts=
16.PROPERTIES_FILE=
b_skipValidation=false
INFO: oracle.sysman.top.agent:Validating OMS_HOST and EM_UPLOAD_PORT
INFO: oracle.sysman.top.agent:Validating with http protocol ...
INFO: oracle.sysman.top.agent:URL framed is:http://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:Connection refusedUnexpected end of file from server
INFO: oracle.sysman.top.agent:Validating with https protocol ...
INFO: oracle.sysman.top.agent:URL framed is:https://nsn175-105.us.oracle.com:4904/empbs/genwallet
SEVERE: oracle.sysman.top.agent:The EM_UPLOAD_PORT passed is a secure port. Hence AGENT_REGISTRATION_PASSWORD or s_encrSecurePwd should be passed
INFO: oracle.sysman.top.agent:EM Protocol Switch determined: https
INFO: oracle.sysman.top.agent:Performing free port detection..
INFO: oracle.sysman.top.agent:Trying for host : nsn175-89/10.134.175.89 and port : 3872
INFO: oracle.sysman.top.agent: Trying for host : /127.0.0.1 and port : 3872
INFO: oracle.sysman.top.agent:** Agent Port Check completed successfully.**
INFO: oracle.sysman.top.agent:Agent Port from User Passed Port3872
INFO: oracle.sysman.top.agent:Paths after canonical format conversions are :
1. state_dir=/users/ncgf/em_agent/agent_inst
2. agentBaseDir=/users/ncgf/em_agent
3. oraHome=/users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Parent directory of agent instance home:/users/ncgf/em_agent
INFO: oracle.sysman.top.agent:AgentConfiguration:perform:AgentPortHandler for /users/ncgf/em_agent/core/12.1.0.3.0 and hosts=nsn175-89.us.oracle.com returned Port to Use=3872
INFO: oracle.sysman.top.agent:Instantiating emctl.template file #DEFAULT_EMSTATE# with /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Writing the following contents into /users/ncgf/em_agent/core/12.1.0.3.0/install/oragchomelist
INFO: oracle.sysman.top.agent:/users/ncgf/em_agent/core/12.1.0.3.0:/users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Both /etc/oragchomelist and /var/opt/oracle/oragchomelist does not exist.
INFO: oracle.sysman.top.agent:Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:AgentConfiguration: Executing emctl deploy agent command...
INFO: oracle.sysman.top.agent:Executing the command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com
INFO: oracle.sysman.top.agent:Creating shared install...
INFO: oracle.sysman.top.agent:Source location: /users/ncgf/em_agent/core/12.1.0.3.0
INFO: oracle.sysman.top.agent:Destination (shared install) : /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:Secure Mode: No
INFO: oracle.sysman.top.agent:DeployMode : agent
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:Creating directories...
INFO: oracle.sysman.top.agent:Creating private.properties...
INFO: oracle.sysman.top.agent:Creating blackouts.xml...
INFO: oracle.sysman.top.agent:Creating targets.xml...
INFO: oracle.sysman.top.agent:Creating emctl control program...
INFO: oracle.sysman.top.agent:Creating emtgtctl control program...
INFO: oracle.sysman.top.agent:Agent will not be secured.
INFO: oracle.sysman.top.agent:Secure REPOSITORY_URL found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Secure emdWalletSrcUrl found. New agent should be configured for secure mode
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Property 'agentTZRegion' is missing from /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties. Updating it...
INFO: oracle.sysman.top.agent:An agentTZregion of 'US/Pacific' is installed in /users/ncgf/em_agent/agent_inst/sysman/config/emd.properties.
INFO: oracle.sysman.top.agent:The command: /users/ncgf/em_agent/core/12.1.0.3.0/bin/emctl deploy agent -L -o nsn175-105.us.oracle.com:4904 -N /users/ncgf/em_agent/agent_inst nsn175-89.us.oracle.com:3872 nsn175-89.us.oracle.com completed with status=0
SEVERE: oracle.sysman.top.agent:Securing of agent step will be skipped because of the following reasons:
1. Agent Registration Password was not passed.
2. b_secureAgent was passed as false
3. The flag -forceConfigure was assed from agentDeploy.sh
INFO: oracle.sysman.top.agent:Plugin File:/users/ncgf/em_agent/plugins.txt
INFO: oracle.sysman.top.agent:Plugin Homes found.
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/core/12.1.0.3.0/perl/bin/perl /users/ncgf/em_agent/core/12.1.0.3.0/bin/AgentPluginDeploy.pl -oracleHome /users/ncgf/em_agent/core/12.1.0.3.0 -agentDir /users/ncgf/em_agent -pluginIdsInfoFile /users/ncgf/em_agent/plugins.txt -action configure -emStateDir /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:
INFO: oracle.sysman.top.agent:The Agent emStateDir location passed is /users/ncgf/em_agent/agent_inst
INFO: oracle.sysman.top.agent: The log file is /users/ncgf/em_agent/agent_inst/install/logs/agentplugindeploy_2013_10_16_15_08_11.log
INFO: oracle.sysman.top.agent: The temp file created to check R/W permissions in Oraclehome: /users/ncgf/em_agent/core/12.1.0.3.0 is /users/ncgf/em_agent/core/12.1.0.3.0/rwFile
INFO: oracle.sysman.top.agent:Plugin command completed with status=0
INFO: oracle.sysman.top.agent:Executing command :/users/ncgf/em_agent/agent_inst/bin/emctl listplugins agent -type all
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Oracle Enterprise Manager Cloud Control 12c Release 3
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
INFO: oracle.sysman.top.agent:---------------------------------------------------------------
SEVERE: oracle.sysman.top.agent:ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log /users/ncgf/em_agent/agent_inst/install/logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
SEVERE: oracle.sysman.top.agent:Agent configuration has failed
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:AgentConfiguration:agent configuration finished with status = false
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: Cfm.save() was called
INFO: Cfm.save(): 2 aggregate instances saved
INFO: done waiting for Action from 15:08:10.272
Thank you for your help AkankshaSheoranKaler. I have executed the following command based on your request. If there is any issue, please let me know. Thanks!
"Can you run this command to make sure that the agents bits were downloaded correctly : oms home /bin /emcli verify_updates
Share the output of the command. I am suspecting this is a know issue (Bug 17300008) but i will wait for your output. Also if you can open an SR with oracle support to track this issue and its resolution. "
[ncgf@nsn175-105 bin]$ ./emcli setup -url=https://nsn175-105.us.oracle.com:7803/em -u sername=SYSMAN
Oracle Enterprise Manager 12c 3.
Copyright (c) 1996, 2013 Oracle Corporation and/or its affiliates. All rights reserve d.
The configuration directory "/users/ncgf" may not be local. See the "dir" option in t he help for the setup command.
Do you want to continue using this directory? [yes/no] yes
Enter password
Emcli setup successful
[ncgf@nsn175-105 bin]$ ./emcli verify_updates
Verifying updates. Starting validation...
Type       : Plug-in
Description: Demo Hostsample Test Plugin
Attributes
        Version: 1201000100
        Revision: 0
        OS Platform: Generic Platform
        Plug-in Name: Demo Host Sample Plugin
Archives are missing from the Software Library. Unable to determine the URL for downloading the update. The update might not have come from Oracle Enterprise Manager Store.
For each update with missing archives, emcli import_update can be used with a -force option to re-upload the archives to the Software Library.

   Hello AkankshaSheoranKaler
We have done the following, but we aren't able to resolve this issue. Thank you for your help!
lf
“This happen if the software library is not accessible, readable or unmounted (if it is in shared file system).”
On Enterprise Manager server [nsn175-105], we did the following:
1. we modified /etc/exports to include this line: /export *(rw,no_root_squash,sync)
we start nfs service by executing command “service nfs start”.
On Management Agent server (nsn175-89), we verified that we are able to mount /export directory of EM server.
On Management Agent server, we started firefox browser and were able to run successfully https://nsn175-105.us.oracle.com:4904/empbs/genwallet
After making this change, we ran agent deployment again. We encountered the same error as shown above.
“You can fix the software library or you can download the agent bits in offline mode.”
For fixing the software library, select Setup->Provision and Patching->Offline Patching, then select Offline Patching radio button, download: https://updates.oracle.com/download/em_catalog.zip. Next upload this zip file.
“Try downloading the bits again”
We are not sure what agent bits are. Would you please explain this and provide procedure how we can download this?
(Here I have attempted to fix the software library, but I am new to Enterprise Manager and not sure how to interpret this).

Install agent on solaris 10 using agent deploy application?

Hi all,
I have installed 10g grid control on solaris 10 with new repository database on same machine.
The OMS, and agent is running on grid host.
Now I want to add other hosts (targets) into grid. For this, I have to install agent on target hosts. I am using agent deploy application method for installation of agent.
It is giving error
Istall --> Failed
"Pre-Install Script is Not Executed, Install is Failed, Run root.sh is Not Executed, Post-Install Script is Not Executed, Collection of Logs is Success"
version for agent and OMS is 10.2.0.1 and for repository database is 10.1.04
any idea, how to troubleshoot this?

Did you get answer? I had same problem on agent 10.2.0.4 deployment on linux 2.6.9-55.ELsmp.

SCOM 2012 R2 Agent Deployment - Uninstall Old and Install New

By chance anyone come up with a scripted method for removing an existing SCOM 2012 SP1 agent and installing a new 2012 R2 agent? While I've come across a few scripts I'm trying to kill a few birds with one stone. This is a cross-domain attempt where the
SCOM servers sit in one domain and the member servers are scattered across multiple domains. Member servers range from Windows Server 2003, 2008, and 2012. In most cases the servers have the 2012 SP1 agent installed and in some cases there are multiple management
groups from previous SCOM standups. In addition there's a separate DEV SCOM 2012 R2 environment to manage DEV/QA servers. Active Directory Integration is configured and I have the necessary security groups created. There is a group policy created which is
filtered to just that security group. So the plan is to simply drop the servers into the correct group and have the agent installed via group policy start up script. ADI should have DEV servers appear in DEV SCOM and PROD in PROD SCOM.
Although there are ways to facilitate agent deployment via the console I need to perform a staged migration against a ton of server so as to not impact the existing production environment. So I'd rather do this remotely to pre-selected servers. This process
should involve removing the existing agent, installing the new one, and if possible removing any existing management groups. So far I've come up with the following:
Uninstall SCOM Agent:
%WinDir%\System32\msiexec.exe /x <path>\MOMAgent.msi /qb
Install SCOM Agent:
msiexec.exe /i \\path\Directory\MOMAgent.msi /qn /l*v \logs\MOMAgent_install.log USE_SETTINGS_FROM_AD=0 MANAGEMENT_GROUP=<MG_Name> MANAGEMENT_SERVER_DNS=<MSDNSName> ACTIONS_USE_COMPUTER_ACCOUNT=0 ACTIONSUSER=<AccountUser> ACTIONSDOMAIN=<AccountDomain>
ACTIONSPASSWORD=<AccountPassword>
Remove Management Group via Script
http://gallery.technet.microsoft.com/Remove-a-Management-group-336c849a/view/Discussions#content
I'm guessing this wheel has already been invented or maybe there's a better way. So I'm open to ideas or suggestions.
Any responses appreciated.

Wow! 4 days and no responses, not good Microsoft SCOM Community. So here's a status on this issue.
As stated I have Active Directory Integration configured which means:
I see the OperationsManager container in AD: dev_scom
I see the HealthService SCP and separate OU's for each of my management servers.
I have an ADI security group containing my management servers and scom action account.
I have an Agent security group which will contain servers the scom agent will be deployed via group policy.
I also have an AD LDAP query set to target the SCOM agent group.
(&(objectCategory=group)(name=DSCOM_ADI))
I finally get the script to install via the following steps:
Reference:
http://technet.microsoft.com/en-us/library/cc754995.aspx
http://technet.microsoft.com/en-us/library/cc770556.aspx
http://blog.coretech.dk/msk/install-a-scom-2012-agent-silent/
1. Launch Notepad ++ and enter the following:
msiexec /i
\\server.yourdomain.com\opsmgragent\%Processor_Architecture%\MOMAgent.msi USE_SETTINGS_FROM_AD=1 MANAGEMENT_GROUP=DEV_SCOM MANAGEMENT_SERVER_DNS=YourSCOMsrvr1.yourdomain.com ACTIONS_USE_COMPUTER_ACCOUNT=0 USE_MANUALLY_SPECIFIED_SETTINGS=0 ACTIONSUSER=svc_dscom
ACTIONSDOMAIN=yourdomain ACTIONSPASSWORD=YourPassword! AcceptEndUserLicenseAgreement=1 /qn /l*v c:\scom2012r2mmainstall.log
2. Save the script to a name of your choice. For me it's installdopsmgragent.cmd. Watch the extensions as you may end up saving it as installdopsmgragent.cmd.txt.
Note: Make note of this steps in the reference articles listed above:
"In the Add a Script dialog box, do the following:
In the Script Name box, type the path to the script, or click Browse to search for the script file in the Netlogon shared folder on the domain controller."
It's been a while since having to use a startup script so it took me a minute to figure this out. "getting too old 'fer this..."
3. Copy the script to the Netlogon folder which is located in the following directory on my Windows 2012 server: E:\SYSVOL\sysvol\yourdomain.com\scripts
4. Launch the group policy management console, create a new policy, edit it, and navigate to the following location:
Computer Configuration > Policies > Windows Settings > Scripts (Startup/Shutdown)
5. Double-click Startup to open the Startup Properties window.
6. Click Add and browse to the location of the script which you copied to the Netlogon share.
7. Click OK to close the Startup Properties window.
8. Close the Group Policy Management Editor.
9. Link the policy to an OU containing the servers.
10. Add the SCOM Agent group to the Security Filtering area of the group policy. I also remove Authenticated Users.
Note: make sure you have a few test servers in your Agent security group.
11. Drop to a command line and run gpupdate /force. You can also use gpupdate /force /sync but you will have to reboot the box you're running this from.
12. Log into one of the servers you have slated to deploy the agent to, drop to a command line, and run the same gpupdate command.
13. Follow this with a gpresult /r command to ensure that you see the policy applied in the Computer Settings area.
14. Reboot the server and you should see the startup script run.
15. Log into the server and launch the Control Panel.
16. If all went well you'll see the "Microsoft Monitoring Agent" icon.
17. Launch Event Viewer, navigate to the Operations Manager events node located under Applications and Services Logs and validate the logs.
17. If all didn't go well check the error log located, for me, on the C:\scom2012r2mmainstall.log
My issue: I don't see the management info in the Agent properties.
I installed this last night and waited until the next day still no changes. Event logs show the following:
Event ID: 2011 The Health Service did not find any policy in Active Directory
Event ID: 2003 No management groups were started. This may either be because no management groups are currently configured or a configured management group failed to start. The Health Service will wait for policy from Active Directory configuring
a management group to run.
I see the HealthService is Running in Task Manager on this server and of course I don't see anything listed in the Management Groups registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HealthService\Parameters\
I don't want to manually add the management group info. Checking as I may have missed something in one of the switches.
Any responses appreciated.

How to recover from failed 12c agent deployment

Greetings,
I am in the process of upgrading to OEM 12c using the 2-System method and I am slowly making progress. Using the OEM 12c Upgrade Console I was able to get the Deploymnet/Configuration step to succeed but the Check Agent Readiness Step failed. I found the error in the <Agent_Instance_Home>/sysman/log/gcagent.log file on the target machine - ORA-12505, TNS:listener does not currently know of SID given in connect descriptor.
Once I resolve that is it simply a matter of going to the Upgrade Console -> Deploy and Configure Agents page, select the cleanup failed deployments tab and go from there or is there something else I must do. I haven't been able to find specific instructions on how to proceed in such a situation.
Thank you.
Bill Wagman

Hi Bill,
Yes your understanding is correct, just slect the option " cleanup failed deployments " while doing the agent deployment and it will take care of everything.
I also see that you have posted few queries in the forum about EM upgrade , i suggest you open an SR with oracle support , so that they can guide you through the upgrade process and help you in case of any issues. In case you have already opened an SR with support then pls ignore this suggestion. :)
Regards
Akanksha

Cloud Control 12c Manual Agent deployment failed

Agent Deployment fails
•     EMCC 12c OMS Server node1 with os-username oemgrid
•     Created the same os account on target server and granted it the same OS privs i.e., (dba os role).
•     Initialization Phase -> Successful
•     Remote Prerequisite check -> Successful
•     Agent Deployment Failed
ERROR: Execution of command /u01/emcc/agent12c/ADATMP_2011-10-22_23-50-30-PM/agentDeploy.sh -ignorePrereqs ORACLE_HOSTNAME=rac1.respecti.com AGENT_BASE_DIR=/u01/emcc/agent12c OMS_HOST=emcc.respecti.com EM_UPLOAD_PORT=1159 AGENT_INSTANCE_HOME=/u01/emcc/agent12c/agent_inst b_doDiscovery=false b_startAgent=false 2>/u01/emcc/agent12c/ADATMP_2011-10-22_23-50-30-PM/logs
CAUSE: Error Message Not Available. Exit Code 1.
Agent Directory on Target is /u01/emcc/agent12c Owner:Group is oemgrid:dba from “/emcc/agent12c” . The “/u01” is owned by username “rac”.
Red Hat Linux 5.6 64bit
Any ideas on how to resolve this issue?
AGENT_BASE_DIR=/u01/emcc/agent12c
Validating the OMS_HOST & EM_UPLOAD_PORT
Executing command : /u01/emcc/agent12c/core/12.1.0.1.0/jdk/bin/java -classpath /u01/emcc/agent12c/core/12.1.0.1.0/jlib/agentInstaller.jar:/u01/emcc/agent12c/core/12.1.0.1.0/oui/jlib/OraInstaller.jar oracle.sysman.agent.installer.AgentInstaller /u01/emcc/agent12c/core/12.1.0.1.0 /u01/emcc/agent12c/ADATMP_2011-10-22_23-50-30-PM /u01/emcc/agent12c -prereq
Validating oms host & port with url: http://emcc.respecti.com:1159/empbs/genwallet
Validating oms host & port with url: https://emcc.respecti.com:1159/empbs/genwallet
Return status:3
Unzipping the agentcoreimage.zip to /u01/emcc/agent12c ....
12.1.0.1.0_PluginsOneoffs_226.zip
Executing command : /u01/emcc/agent12c/ADATMP_2011-10-22_23-50-30-PM/unzip -o /u01/emcc/agent12c/ADATMP_2011-10-22_23-50-30-PM/12.1.0.1.0_PluginsOneoffs_226.zip -d /u01/emcc/agent12c
Checking the ownership of agent base directory:/u01/emcc/agent12c
Checking for proper ownership on the agent base directory.
Checks whether the agent base directory is owned by the agent user oemgrid and that its parent directory is owned by either the agent user or root.
Login name is : oemgrid & file owner is : oemgrid
ERROR : root dir is not owned by root user.

Ensure that the root user owns the root directory. This is a prerequisite for installing an agent (in silent as well as GUI mode).
See the prerequisite about "Installation Base Directory Requirements"in the Prerequisites section of the install guide:
For Silent Instal (row 11): http://download.oracle.com/docs/cd/E24628_01/install.121/e22624/install_agent.htm#BABCFEGE
For GUI Install (row 17) : http://download.oracle.com/docs/cd/E24628_01/install.121/e24089/install_agent_usng_rsp.htm#CEGIAADH
Thanks!
Edited by: user765751 on Oct 27, 2011 8:12 PM

ZCM Agent deployment for OS X Forum?

Sorry for posting this in the Linux forum, but is there an agent
deployment forum for the Mac agent?

novell.support.zenworks.configuration-management.11.agent-deployment.mac
On 2/26/2013 2:19 PM, Mike wrote:
> Sorry for posting this in the Linux forum, but is there an agent
> deployment forum for the Mac agent?
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Push mass agent installation from the grid.

Hi,
I am planning to push the mass agent installation from the grid..
In how many servers we can push the agents in parallel at a time.
Is there any limit of number of servers which agents need to be installed?
Thanks,
Mahi

Hi,
there is no limit but I advice to test it on one if your procedure works before you run it on all servers.
REgards,
Tom

Agent Deployment, Operation Timed Out - Solaris v5.10

Hello,
The agent has been gray since we upgraded to 2012R2, living on agent version 1.4.xxx. I tried to push an update to the agent but it failed. When I attempt to manually start/restart the agent, I get the following error.
~>/opt/microsoft/scx/bin/tools/scxadmin -start
svc:/application/management/scx-cimd:default enabled.
svcadm: Instance "svc:/application/management/scx-cimd:default" is in maintenance state.
RETURN CODE: 3
After this, I put the machine into maintenance mode, and took it back out, and again tried to restart the agent. No luck.
When I navigate to the directory, it clearly appears the SCOM directory does not exist.
Then I followed up by deleting the agent off of the SCOM console and now I am trying to deploy the agent. However, I get the following error:
Failed during SSH discovery. Exit code: -2147221248
Standard Output:
Standard Error:
Exception Message:Operation timed out
Any idea guys?

Verify you have removed and cleaned up the agent from the Solaris system by running the following on it.
pkgrm MSFTscx
Check
the following as well for error -2147221248
Possible causes:
(Case A)
The user credential provided for agent deployment or certificate signing does not have a home directory
(Case B)
Sudo elevation was selected in the user credential input, but the user credential provided is not correctly configured to use passwordless sudo elevation or the required sudo elevation privileges were not granted for the user account used in discover
Resolutions:
(Case A)
Verify that the user has a home directory at: /home/<username> and that the user is able to write to this directory
(Case B)
Review sudo elevation configuration documentation and verify user configuration for sudo.
Note that passwordless sudo must be configured.
Regards,
-Steve

Where can Iget Agent deploy application?

Hi
All
Where can Iget Agent deploy application? is it a software? Is it comes with 10g grid control dvd?
Thanks,
Vishal

Ok I got it. once we install the grid control there is one option called agent installation.
Anyways thanks for your effort.
Thanks,
Vishal

Got warnning in Grid control agent deployment

I met the the error message '
PROBLEM : The host name in /etc/hosts is not proper.
WARNING : Check complete. The overall result of this check is: Failed <<<<
RECOMMENDATION : Please verify the hostname is /etc/hosts and the start the installation. '
while I deploy Grid Control agent.
My /etc/hosts
# Do not remove the following line, or various programs
# that require network functionality will fail.
127.0.0.1 localhost.localdomain localhost
192.168.0.191 ms191.ranfone.com ms191
192.168.0.153 main
ms191 is my OMS SERVER host. main is the target that I want to deploy agent.
I know the hosts should be configured like this .
ip hostname.domain host
however I don't have a domain name . is it neccessary?
Thanks for your kind help.

I have modified my /etc/hosts file and the problem is solved.
and I don't think the localhost.domain line should be commented.
if so, the listener can't start successfully.
anyway. thanks for you reply.
Edited by: user6748141 on 2009-10-19 上午12:18

Conversion Agent Deployment ?

Hi
I have deployed all the required component for Conversion Agent in PI system using SDM and all successfully.
1. CM_JavaAPI.sda
2. CM_RemoteSupportInterface.sda
3. CM_TransformModule.sda
4. ConversionAgent.sda
But then how to deploy my project from Conversion Agent Studio to the PI server. I have went through some of the blog and i have to copy the project directory to ServiceDB in the PI server.
Could anyone help where i can found the ServiceDB in the PI server ?
Thank you and Best Regards
Fernand

hi
try check this doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b10d986b-0701-0010-eca9-b11ca1f43f9d
regards
kummari

OEM agent deployment : Status=255

Hi,
I am deploying OEM Agent 10.2.0.2.0 on Linux (32-bit). As first installation was failed because of permission issue, I tried to reinstall it. I ended with this error :
Initializing Java Virtual Machine from /tmp/OraInstall2007-02-26_03-45-43PM/jre/1.4.2/bin/java. Please wait...
Completed with Status=255
I tried to delete old installed folder but still same.
Can anyone help in resolving this?
Thanks in adv.

I am following the orale documentation, the link is following:
http://download-west.oracle.com/docs/cd/B14099_19/manage.1012/b16228/deploying_the_management_agent.htm#CIHEJIJC
I installed agents on 3 other Linux (64 bit) successfully. But this time it is giving error. This time I have applied OEM plug-in where OEM is installed to monitor Oracle Application server and after that tried to deploy an agent on host. First time the link, setup was successful but at the end it suggested to change the permission os an .xml file. after doing that I end up with the error. It seems some cleanup issue. Pl. give your suggestions...
Thanks

Mass Agent Deployment

Similar Messages

Maybe you are looking for