MASS Article Master reorder point update thru program

Hi Gurus,
The BAPI to change Article Master is BAPI_MATERIAL_MAINTAINDATA_RT. Can you please let me know if there is any BAPI which i can use for MASS update of articles instead of calling the above BAPI in a Loop. My purpose is to mass udpate reorder point for articles.
Your help would be highly appreciated.
-David.

Hi David,
You can use the transaction MASS_MARC to do this.
Remember you can only change reorder point of the articles already on replenishment using this transaction.
Regards,
Naveen

Similar Messages

Mass change of Reorder point at MRP area level

Hi,
I have another constraint.
MM17 will mass change the reorder point at plant level.
Is there any process to do mass change of reorder point for a particular MRP area level.
Please suggest.
Thanks in advance.

Hi,
When I am doing mass change of reorder point through MM17 tcode selecting MARC table,it will chnage at plant level and getting reflected in material master once I save changes.
But I need it at storage location level.I tried to do this through MM17 tcode selecting MARD table,which will ask for storage location data(i.e storage location level).But after I save the changes,changes are not getting reflected in Display material-MRP1 view.
Can anyone pls suggest why this is happening.
Thanks in advance.

Mass change of Reorder point on MRP areas for materials

Hi,
Is there any process to upload mass change of reorder point on MRP areas for materials.
Please suggest.
Thanks in advance.

Hi Pavithra,
I know this is an old thread and my answer may not be relevant to you anymore but maybe it will help others. Are you trying to do a mass change for the reorder points of the MRP Areas? If so, go to tcode SA38, then run program RMMDDIBE. Then go to create/change with Data tab. Select change MRP area and there you can change the reorder points for your MRP areas.
Regards,
Chester

Mass Vendor master Payment method update

Hi All
Mass vendor master payment method update, is there any other alternative solution to update the new payment method in Vendor master. Normally we need to assign new payment method in Vendor master one by one instead of mass vendor master payment method update. Please help me to resolve the issue.
Regards
K.Gunasekar

Thanks for your update
I tryed to assign the new payment method in MASS transaction code and new value is updated but existing payment method has deleted. We need to maintain the previous payment method along with new payment method. Please provide me the necessary solution.
Regards
K.Gunasekar
Edited by: KGUNASEKAR on Dec 6, 2010 10:15 AM

BAPI or Function module for Mass article master maintenance (for retail)

Hi Gurus,
I know the BAPI to change Article Master is BAPI_MATERIAL_MAINTAINDATA_RT. Can you please let me know if there is any BAPI which i can use for MASS update of articles instead of calling the above BAPI in a Loop. My purpose is to mass udpate reorder point for many articles.
Your help would be highly appreciated.
-David.

Hello David,
You can do mass update thru FM MATERIAL_UPDATE_LOGISTIC_DATA.
Thanks,
Chenna.

Master data queue updates thru /SAPAPO/TS_LCM_QUEUE_UPDATE

Hello Experts,
In our present solution, there are frequent master data changes impacting the performance of SNP applications.
As per SAP recommendation we are planning to schedule /SAPAPO/TS_LCM_QUEUE_UPDATE program.
I wanted to know following if anyone is already using this program
1) Appropriate frequency of running this program
2) Is there any impact on users ( say accessing planning book or product view etc)
3) Are there any undesirable impacts associated with this program
Thanks in advance
Amit

Hi Amit
You would probably get your answer in one of the earlier thread for the same topic
Poor performance / Long run time for opening SNP planning book
Thanks,
Prasun

IS Retail - Article Sales Price Updation in Article Master

Hai guys,
I created a new article (mm41) and I enetered Purchasing price in the 'Purchasing' tab. But when I give a mark up percentage in the 'Sales' tab, the price is not updating / changing as per the percentage. However I saw this feature working fine in some others' system.
Can anyone help me in fixing up this problem? Thanks in advance
Regards,
Maheshwaran. I

Hi
Check following setting
SPRO>Logistics general>Retail pricing>Sales Price Calculation>Assign Pricing Type/Reference Site to Organizational Level
U should have pricing type say 0001 & reference site assigned to sales org, distribution channel combination
Article master will calculate sales prices based on this & mark up u have maintained for mechandise category in wva1
Regards,
NNK
PS:Award points for usful ans

Mass Extend article Master

Hi,
I am trying to extend article master to site and storage location. MMSC_MASS or MM17 does not allow for Retail article. Is there any other mass transaction thru which Articles can be extended?
Tried articel integrated change but it only allows to change, not extend or create.
Thanks - Adarsh

Check this link:
Extend Article for distribution chain
How to extend Article to Different Sales organization
Edited by: Afshad Irani on Aug 24, 2010 9:20 AM

MM42 data (Article master) Mass change BAPI????????

Hi All,
Is there any BAPI exist which can be used to change MM42 data (Article master).
Like requirement is to do mass change in article, but the MM42 BDC is taking too long to change in all Articles.
Any help for BAPI name will be appreciated.
Regards

use this function MATERIAL_MAINTAIN_DARK_RETAIL

Update the data into the ZTABLE fields thru program logic ..?

hi all,
i have ZTABLE1,ZTABLE2,ZTABLE3, and this tables like ALV grids using object methods.
in the same table fields now i wanted to update the data into the ZTABLE fields thru program logic .
could anyone please help me ....
please provide if anyone of have any program logic that would be helpfull to me.
thanks in advance...
srinivas....

Hi Srinivas,
The following statements are used to upload the data into custom tables.
1. Modify
2. Update
3. Insert
if you are using OO ALV, you should enable the 'SAVE' button in the main toolbar. if the user press the save button, then you should upload the data to the custom table.
please find the example code, in this example 'PERFORM F_SAVE_DATA'(here i gave the message only, you write your own logic here) is used to save the data in custom table.
Report Program: ZB_ALVOOPS_TEST
Line:-----
REPORT ZB_ALVOOPS_TEST MESSAGE-ID ZCR_MESSAGES.
Top Include - Global Data Declaration                        *
INCLUDE ZB_ALVOOPS_TEST_TOP.
SEL Include - Selection Screen                               *
INCLUDE ZB_ALVOOPS_TEST_SEL.
AT SELECTION SCREEN                                          *
Initialization Event                                         *
INITIALIZATION.
Initialize Screen Number.
PERFORM F_INITIALIZE.
Initialize Field Catalog for ALV Grid.
PERFORM F_INITIALIZE_GRID.
END-OF-SELECTION.
Call Display Screen                                          *
CALL SCREEN 9000.
Event Handler - Class Definition and Implementation          *
INCLUDE ZB_ALVOOPS_TEST_CL01.
PBO Event - Module Implementation                            *
INCLUDE ZB_ALVOOPS_TEST_PBO.
PAI Event - Module Implementation                            *
INCLUDE ZB_ALVOOPS_TEST_PAI.
Subroutine Include                                           *
INCLUDE ZB_ALVOOPS_TEST_F01.
Include: ZB_ALVOOPS_TEST_TOP
Line:-------
Type Declaration For Internal Tables                         *
Collection Data
TYPES: BEGIN OF TY_MARA                                                    ,
         MATNR         TYPE MATNR                                         , " Material
         VPSTA         TYPE VPSTA                                         , " Maintenance status of complete material
         MTART         TYPE MTART                                         , " Material Type
         MBRSH         TYPE MBRSH                                         , " Industry Sector
         MATKL         TYPE MATKL                                         , " Material Group
         BISMT         TYPE BISMT                                         , " Old material number
         MEINS         TYPE MEINS                                         , " Base Unit of Measure
         BSTME         TYPE BSTME                                         , " Order unit
         BRGEW         TYPE BRGEW                                         , " Gross weight
         MAKTX         TYPE MAKTX                                         , " Material Description
         ROWCOLOR      TYPE CHAR4                                         , " Row Color
       END OF TY_MARA                                                      .
Flag                                                         *
DATA: FG_REFRESH TYPE XFLD                                               , " Used to Refresh ALV
      FG_SAVE     TYPE XFLD                                               . " Data Saved Or Not.
Internal Table Declaration                                   *
DATA: IT_MARA              TYPE STANDARD TABLE OF TY_MARA                 , " Internal table for Material
      WA_MARA              TYPE TY_MARA                                   . " Workarea for Material
Variable Declaration For General Constants                   *
CONSTANTS: C_SCREEN_SELECT      TYPE SYDYNNR         VALUE '9001'         , " Selection Screen Number
           C_SCREEN_SELECT_NIL TYPE SYDYNNR         VALUE '9002'         , " Empty Screen Number
           C_STATUS9000         TYPE CHAR10          VALUE 'STATUS9000'   , " PF-Status
           C_TITLEBAR           TYPE CHAR4           VALUE '9000'         , " Title Bar
           C_ISSUE_CONTAINER    TYPE SCRFNAME        VALUE 'WORKCONTAINER', " Container Name (Screen Painter)
           C_BUTTON_TYPE        TYPE CHAR1           VALUE '3'            , " Button Type
           C_EXECUTE            TYPE CHAR4           VALUE 'SELE'         , " Functions 'SELE'    -> Execute
           C_BACK               TYPE CHAR4           VALUE 'BACK'         , " Functions 'BACK'    -> Back to main screen
           C_ENTER              TYPE CHAR5           VALUE 'ENTER'        , " Functions 'ENTER'   -> No Action
           C_SEL01              TYPE CHAR5           VALUE 'SEL01'        , " Functions 'SEL01'   -> Toggle Function
           C_SAVE               TYPE CHAR4           VALUE 'SAVE'         , " Functions 'SAVE'    -> Save Function
           C_REFRESH            TYPE CHAR7           VALUE 'REFRESH'      , " Functions 'REFRESH' -> Clear and Fres All objects
           C_ADD_MI             TYPE CHAR6           VALUE 'ADD_MI'       , " Functions 'ADD_MI' -> Add New Media Issue
           C_TRUE               TYPE CHAR1           VALUE 'X'            , " Set X value
           C_REQUIRED           TYPE CHAR1           VALUE '1'            , " Un-Confirmed Qty field obligatory or not.
           C_INPUT              TYPE CHAR1           VALUE '0'            , " Reason field should not be input.
           C_ALV_SAVE           TYPE CHAR1           VALUE 'A'            , " ALV
           C_ERROR              TYPE CHAR1           VALUE 'E'            , " Error Type
           C_SIGN               TYPE CHAR1           VALUE 'I'            , " Sign
           C_OPTION             TYPE CHAR2           VALUE 'EQ'           , " Option.
           C_COMMIT_WAIT        TYPE CHAR1           VALUE '5'            , " Waiting to update in DB
           C_TABNAME            TYPE CHAR1           VALUE '1'            , " Parameter (ALV)
           C_CANCEL             TYPE CHAR1           VALUE 'N'            , " Cancel
           C_YES                TYPE CHAR1           VALUE 'J'            . " Yes.
Variable Declaration For Container and ALV Grid              *
DATA: OBJ_CUST_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER            , " Container Class
      OBJ_CUST_GRID       TYPE REF TO CL_GUI_ALV_GRID                    . " ALV Grid Class
Field Catalog Declaration For Container and ALV Grid         *
DATA: IT_FIELDCAT TYPE LVC_T_FCAT                                        , " Field Catalog
      IT_EXCLUDE   TYPE UI_FUNCTIONS                                      , " Standard Function Exclude from ALV
      WA_FIELDCAT TYPE LVC_S_FCAT                                        , " For Field Catalog
      WA_LAYOUT    TYPE LVC_S_LAYO                                        . " ALV Layout
Global Variable Declaration                                  *
DATA: OK_CODE                  TYPE SY-UCOMM                              , " OK CODE ( Screen Attribute Don't Change the var.name)
      G_SAVE_CODE              TYPE SY-UCOMM                              , " OK CODE
      G_ANSWER                 TYPE CHAR1                                 , " OK or Cancel.
      G_SELECTION_DYNNR        TYPE SYDYNNR                               , " Screen Number
      G_ERROR_TEXT             TYPE CHAR128                               , " Error Text
      G_SELECTION_TOGGLE_TEXT TYPE CHAR50                                , " Toggle Text, Value: Hide Selection, Show Selection
      G_MATNR                  TYPE MATNR                                 , " Material
      G_SMATNR                 TYPE MATNR                                 , " Material
      G_SMTART                 TYPE MTART                                 . " Material Type
Include: ZB_ALVOOPS_TEST_SEL
Line:-------
Selection Screen
SELECTION-SCREEN BEGIN OF SCREEN 9001 AS SUBSCREEN                           .
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME TITLE TEXT-001          .
SELECT-OPTIONS: S_MATNR FOR G_SMATNR                                        , " Material
                S_MTART FOR G_SMTART                                        . " Material Type
SELECTION-SCREEN   END OF BLOCK SELECTION                                    .
SELECTION-SCREEN   END OF SCREEN 9001                                        .
Empty Selection
SELECTION-SCREEN BEGIN OF SCREEN 9002 AS SUBSCREEN                           .
SELECTION-SCREEN BEGIN OF BLOCK SELECTION_NIL WITH FRAME TITLE TEXT-002      .
Nil
SELECTION-SCREEN   END OF BLOCK SELECTION_NIL                                .
SELECTION-SCREEN   END OF SCREEN 9002                                        .
Include: ZB_ALVOOPS_TEST_CL01
Line:-------
CLASS lcl_event_handler DEFINITION                                  *
Event Handler Class Definition                                      *
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
    METHODS:
    HANDLER_TOOLBAR      FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
                             IMPORTING E_OBJECT E_INTERACTIVE     ,
    HANDLER_USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
                             IMPORTING E_UCOMM                     .
ENDCLASS.                    "lcl_event_handler DEFINITION
CLASS lcl_event_handler IMPLEMENTATION                              *
Event Class Implementation.                                         *
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
Toolbar -----Create 'Add Issue' button
METHOD HANDLER_TOOLBAR.
    DATA: L_WA_TOOLBAR TYPE STB_BUTTON.                                          " Toolbar
    CLEAR: L_WA_TOOLBAR.
Button Type
    L_WA_TOOLBAR-BUTN_TYPE = C_BUTTON_TYPE   .            " 3.
    APPEND L_WA_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
Add Issue Button.
    CLEAR: L_WA_TOOLBAR.
    L_WA_TOOLBAR-FUNCTION   = 'ADD_MI'   .                                         " 'ADD_MI'   .
    L_WA_TOOLBAR-ICON       = 'ICON_CREATE'.
    L_WA_TOOLBAR-QUICKINFO = 'CREATE'   .                                         " 'Add Issue'.
    L_WA_TOOLBAR-TEXT       = 'CREATE'   .                                         " 'Add Issue'.
    L_WA_TOOLBAR-DISABLED   = ''.
    APPEND L_WA_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
    CLEAR: L_WA_TOOLBAR.
ENDMETHOD.                    "handler_toolbar
User Actions Events-- Handle 'Add Issue' Button Click.
METHOD HANDLER_USER_COMMAND.
    CASE E_UCOMM.
Add Issue Button.
      WHEN C_ADD_MI.
        IF NOT G_MATNR IS INITIAL.
          FG_REFRESH = C_TRUE.
          PERFORM F_ADD_MEDIAISSUE.
        ENDIF.
    ENDCASE.
Refresh Control
    CALL METHOD CL_GUI_CFW=>FLUSH
      EXCEPTIONS
        CNTL_SYSTEM_ERROR = 1
        CNTL_ERROR        = 2
        OTHERS            = 3.
Handle Exceptions
    IF SY-SUBRC <> 0.
      CASE SY-SUBRC.
        WHEN 1.
          G_ERROR_TEXT = TEXT-026.                                        " 'Control System Error'.
        WHEN 2.
          G_ERROR_TEXT = TEXT-027.                                        " 'Control CL_GUI_CFW Has Raised Error'.
      ENDCASE.
        MESSAGE G_ERROR_TEXT TYPE 'E'.
    ENDIF.
Refresh Alv Grid.
    PERFORM F_REFRESH_GRID.
ENDMETHOD.                    "handler_user_command
ENDCLASS.                    "lcl_event_handler IMPLEMENTATION
Object Ref. Event Class.
DATA: OBJ_EVENT_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Include: ZB_ALVOOPS_TEST_PBO
Line:----
Module STATUS_9000 OUTPUT                                        *
Set PF-Status                                                      *
MODULE STATUS_9000 OUTPUT.
PF Status
SET PF-STATUS C_STATUS9000 .
SET TITLEBAR C_TITLEBAR    .
ENDMODULE.                 " STATUS_9000 OUTPUT
Module Create_Alvgrid OUTPUT                                     *
Create Or Refresh ALV Grid                                         *
MODULE CREATE_ALVGRID OUTPUT.
PERFORM F_PROCESS_ALV .
PERFORM F_REFRESH_GRID.
ENDMODULE.                 " create_alvgrid OUTPUT
Include: ZB_ALVOOPS_TEST_PAI
Line:----
Module exit_command INPUT                                        *
Exit Command ( Cancel and Exit )                                   *
MODULE EXIT_COMMAND INPUT.
LEAVE PROGRAM.
ENDMODULE.                 " exit_command INPUT
Module user_command_9000 INPUT                                   *
User Command - Process toolbar Events                              *
MODULE USER_COMMAND_9000 INPUT.
Take an Action based on user Input
G_SAVE_CODE = OK_CODE.
CLEAR OK_CODE.
CASE G_SAVE_CODE.
Back
    WHEN C_BACK .
Raise the Confirmation Message When User not saved the data.
      IF FG_SAVE = C_YES.
        PERFORM F_EXITCHECK CHANGING G_ANSWER .
        IF G_ANSWER = C_YES.
          PERFORM F_SAVE_DATA.
        ELSE.
          CLEAR G_SAVE_CODE.
        ENDIF.
        CLEAR: FG_SAVE.
      ENDIF.
      LEAVE PROGRAM.
Enter
    WHEN C_ENTER.
Execute ( F8 )
    WHEN C_EXECUTE .
      IF IT_MARA IS INITIAL.
        PERFORM F_SELECTMATERIAL.
      ENDIF.
Toggle Button
    WHEN C_SEL01.
      PERFORM F_TOGGLE_SELECTION_SCREEN.                                  " USING ok_code.
SAVE ( CTRL+S )
    WHEN C_SAVE.
      IF NOT G_MATNR IS INITIAL.
        PERFORM F_SAVE_DATA.
        CLEAR: G_MATNR.
      ENDIF.
New Entry ( CTRL+F1 )
    WHEN C_REFRESH.
      PERFORM F_REFRESH_DATA.
ENDCASE.
ENDMODULE.                 " user_command_9000 INPUT
Include: ZB_ALVOOPS_TEST_F01
Line:----
Form f_toggle_selection_screen                                    *
Toggle Function - Hide Selection / Show Selection                  *
FORM F_TOGGLE_SELECTION_SCREEN.
Toggle Function
IF G_SELECTION_DYNNR = C_SCREEN_SELECT.
    G_SELECTION_DYNNR = C_SCREEN_SELECT_NIL.
    G_SELECTION_TOGGLE_TEXT = TEXT-902.
ELSE.
    G_SELECTION_DYNNR = C_SCREEN_SELECT.
    G_SELECTION_TOGGLE_TEXT = TEXT-901.
ENDIF.
ENDFORM.                    " f_toggle_selection_screen
Form f_initialize
Initialize Screen Number and Text
FORM F_INITIALIZE .
Initialize Screen Number
G_SELECTION_DYNNR      = C_SCREEN_SELECT.
G_SELECTION_TOGGLE_TEXT = TEXT-901.
ENDFORM.                    "f_initialize
Form f_selectmaterial                                           *
FORM F_SELECTMATERIAL .
Select the data from Mara Table
SELECT A~MATNR
         A~VPSTA
         A~MTART
         A~MBRSH
         A~MATKL
         A~BISMT
         A~MEINS
         A~BSTME
         A~BRGEW
         B~MAKTX
    INTO TABLE IT_MARA
    FROM MARA AS A INNER JOIN MAKT AS B ON AMATNR = BMATNR
   WHERE A~MATNR IN S_MATNR
     AND A~MTART IN S_MTART
     AND B~SPRAS = 'EN'.
IF SY-SUBRC = 0.
    FG_REFRESH = C_TRUE.
    FG_SAVE     = C_YES .
    G_MATNR     = C_TRUE.
    LOOP AT IT_MARA INTO WA_MARA WHERE BRGEW >= 200.
      WA_MARA-ROWCOLOR = 'C310'.
      MODIFY IT_MARA FROM WA_MARA.
    ENDLOOP.
ELSE.
    MESSAGE 'No data Found' TYPE 'E'.
ENDIF.
ENDFORM.                    " f_selectmaterial
Form f_initialize_grid                                            *
Initialize Field Catalog.                                          *
FORM F_INITIALIZE_GRID .
field catalog
PERFORM F_ATTRFCAT USING :
                   'MATNR' '1' '0'   TEXT-005       '15' '0' 'X' ' ' ' ',
                   'VPSTA' '1' '1'   TEXT-006       '15' '0' 'X' ' ' ' ',
                   'MTART' '1' '2'   TEXT-007       '15' '0' ' ' ' ' ' ',
                   'MBRSH' '1' '3'   TEXT-008       '15' '0' ' ' ' ' ' ',
                   'MATKL' '1' '4'   TEXT-009       '15' '0' ' ' 'X' ' ',
                   'BISMT' '1' '5'   TEXT-010       '15' '0' ' ' ' ' ' ',
                   'MEINS' '1' '6'   TEXT-011       '15' '0' ' ' ' ' ' ',
                   'BSTME' '1' '7'   TEXT-012       '15' '0' ' ' ' ' ' ',
                   'MAKTX' '1' '8'   TEXT-013       '15' '0' ' ' ' ' 'C711',
                   'BRGEW' '1' '9'   TEXT-014       '15' '0' ' ' ' ' ' '.
Set Editable Fields in ALV.
PERFORM F_SETEDIT_FIELDS CHANGING IT_FIELDCAT.
ENDFORM.                    "f_initialize_grid
Form f_setedit_fields                                             *
Set Editable Fields in ALV                                         *
C_IT_FIELDCAT <-- Field Catalog                                  *
FORM F_SETEDIT_FIELDS CHANGING C_IT_FIELDCAT TYPE LVC_T_FCAT.
Local Variable Declaration.
DATA: LS_FIELDCAT LIKE LINE OF C_IT_FIELDCAT.                           " Field Catalog
Create Editable Fields.
LOOP AT C_IT_FIELDCAT INTO LS_FIELDCAT.
    CASE LS_FIELDCAT-FIELDNAME.
      WHEN 'BRGEW'.
        LS_FIELDCAT-EDIT = C_TRUE.
      WHEN 'MAKTX'.
        LS_FIELDCAT-EDIT = C_TRUE.
    ENDCASE.
    MODIFY C_IT_FIELDCAT FROM LS_FIELDCAT.
ENDLOOP.
ENDFORM.                    " f_setedit_fields
Form f_attrfcat                                                   *
Update Field Catalog Internal Table                                *
U_FIELDNAME     --> Field Name                                    *
U_ROW_POS       --> Row Position                                  *
U_COL_POS       --> Column Position                               *
U_SELTEXT_L     --> Display Column Heading                        *
U_OUTPUTLEN     --> Heading Output Length                         *
U_DECIMALS_OUT --> Number of decimal places in output            *
U_KEY           --> Key in ALV Display                            *
U_FIX           --> Existence of fixed values                     *
FORM F_ATTRFCAT USING
                    U_FIELDNAME    TYPE SLIS_FIELDNAME
                    U_ROW_POS      TYPE SYCUROW
                    U_COL_POS      TYPE SYCUCOL
                    U_SELTEXT_L    TYPE SCRTEXT_L
                    U_OUTPUTLEN    TYPE OUTPUTLEN
                    U_DECIMALS_OUT TYPE CHAR1
                    U_KEY          TYPE CHAR1
                    U_FIX          TYPE VALEXI
                    U_COL_COLOR    TYPE LVC_EMPHSZ.
Update field catalog.
WA_FIELDCAT-FIELDNAME    = U_FIELDNAME.
WA_FIELDCAT-ROW_POS      = U_ROW_POS.
WA_FIELDCAT-COL_POS      = U_COL_POS.
WA_FIELDCAT-COLTEXT      = U_SELTEXT_L.
WA_FIELDCAT-SELTEXT      = U_SELTEXT_L.
WA_FIELDCAT-OUTPUTLEN    = U_OUTPUTLEN.
WA_FIELDCAT-DECIMALS_O   = U_DECIMALS_OUT.
WA_FIELDCAT-KEY          = U_KEY.
WA_FIELDCAT-VALEXI       = U_FIX.
WA_FIELDCAT-EMPHASIZE    = U_COL_COLOR.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM.                    "ATTR_FCAT
Form f_refresh_data                                               *
Clear All the objects used in the program ( Data Related )         *
FORM F_REFRESH_DATA .
Clear All the Objects Used in Our Program.
CLEAR: S_MATNR      ,
         S_MTART      ,
         IT_MARA      ,
         OK_CODE      ,
         FG_REFRESH   ,
         FG_SAVE      ,
         G_SAVE_CODE ,
         G_MATNR      .
FREE: S_MATNR      ,
         S_MTART      ,
         IT_MARA      ,
         OK_CODE      ,
         FG_REFRESH   ,
         FG_SAVE      ,
         G_SAVE_CODE ,
         G_MATNR      .
Refresh Alv.
FG_REFRESH = C_TRUE.
ENDFORM.                    " f_refresh_data
Form f_process_alv                                                *
1. Create Custom Container                                         *
2. Create ALV Grid                                                 *
3. Exclude Standard Functions                                      *
4. Display the ALV                                                 *
5. Register the Events.                                            *
FORM F_PROCESS_ALV .
Display ALV
Custom Container
IF OBJ_CUST_CONTAINER IS INITIAL.
    CREATE OBJECT OBJ_CUST_CONTAINER
      EXPORTING
        CONTAINER_NAME = C_ISSUE_CONTAINER.
ALV Grid
    IF OBJ_CUST_GRID IS INITIAL.
      CREATE OBJECT OBJ_CUST_GRID
        EXPORTING
          I_PARENT = OBJ_CUST_CONTAINER.
    ENDIF.
Exclude Standard Functions
    PERFORM F_EXCLUDETOOLBAR USING OBJ_CUST_GRID
                          CHANGING IT_EXCLUDE.
Layout.
    WA_LAYOUT-CWIDTH_OPT = C_TRUE.
    WA_LAYOUT-INFO_FNAME = 'ROWCOLOR'.
ALV Grid Display
    CALL METHOD OBJ_CUST_GRID->SET_TABLE_FOR_FIRST_DISPLAY
      EXPORTING
       IS_LAYOUT            = WA_LAYOUT
        IT_TOOLBAR_EXCLUDING = IT_EXCLUDE
        I_SAVE               = C_ALV_SAVE
      CHANGING
        IT_FIELDCATALOG      = IT_FIELDCAT[]
        IT_OUTTAB            = IT_MARA.
ENDIF.
Register Editable ALV Events
CALL METHOD OBJ_CUST_GRID->REGISTER_EDIT_EVENT
    EXPORTING
      I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED
    EXCEPTIONS
      ERROR      = 1
      OTHERS     = 2.
*Create Object for Custom Event Handler Class if the ref. object is
*initial.
IF OBJ_EVENT_HANDLER IS INITIAL.
    CREATE OBJECT OBJ_EVENT_HANDLER.
ENDIF.
Register Events
SET HANDLER: OBJ_EVENT_HANDLER->HANDLER_TOOLBAR       FOR
OBJ_CUST_GRID,
               OBJ_EVENT_HANDLER->HANDLER_USER_COMMAND FOR
               OBJ_CUST_GRID.
Set Toolbar
CALL METHOD OBJ_CUST_GRID->SET_TOOLBAR_INTERACTIVE.
ENDFORM.                    " f_process_alv
Form f_excludetoolbar                                             *
Exclude Standard Functions from ALV                                *
U_OBJ_CUST_GRID --> Instant for CL_GUI_ALV_GRID                  *
C_IT_EXCLUDE     <-- Internal table for Exclude                   *
FORM F_EXCLUDETOOLBAR USING U_OBJ_CUST_GRID TYPE REF TO CL_GUI_ALV_GRID
                    CHANGING C_IT_EXCLUDE     TYPE UI_FUNCTIONS.
Exclude Standard Functions
CLEAR: C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_CHECK              TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_REFRESH            TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_COPY           TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_COPY_ROW       TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_CUT            TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_DELETE_ROW     TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_APPEND_ROW     TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_INSERT_ROW     TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_MOVE_ROW       TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_PASTE          TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_PASTE_NEW_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_UNDO           TO C_IT_EXCLUDE.
ENDFORM.                    " f_excludetoolbar
Form f_create_returnrequest                                       *
Create Return Request based on the Work container ( ALV Grid Data) *
FORM F_CREATE_RETURNREQUEST.
Message to save
ENDFORM.                    " f_create_returnrequest
Form f_add_mediaissue                                             *
Create New Media Issue if the user click 'ADD ISSUE' Button.       *
1. Get the Input From User                                         *
2. Get Total Delivery and Return Quantity                          *
3. Append to Final internal table                                  *
FORM F_ADD_MEDIAISSUE .
Local Variable Declaration.
MESSAGE 'Add Button Clicked' TYPE 'I'.
ENDFORM.                    " f_add_mediaissue
Form f_refresh_grid                                               *
Refresh ALV Grid                                                   *
FORM F_REFRESH_GRID .
Refresh ALV Grid.
IF FG_REFRESH IS NOT INITIAL.
    CALL METHOD OBJ_CUST_GRID->REFRESH_TABLE_DISPLAY.
    CLEAR: FG_REFRESH.
ENDIF.
ENDFORM.                    " f_refresh_grid
Form f_getcollectissue                                            *
FORM F_GETCOLLECTISSUE .
Collection Plan Data
ENDFORM.                    " f_getcollectissue
Form f_perpare_final                                              *
FORM F_PERPARE_FINAL .
Perpare Final Internal table
ENDFORM.                    " f_perpare_final
Form f_validate_data                                              *
FORM F_VALIDATE_DATA.
Message if any data validation.
ENDFORM.                    " f_validate_data
Form f_modify_final                                               *
Update Actual Delivery Qty and Return Qty in Final Internal table *
Form f_save_data                                                  *
Save the Data When User Click 'Save' Button                        *
FORM F_SAVE_DATA .
Message
MESSAGE 'Save Button Clicked' TYPE 'I'.
ENDFORM.                    "f_save_data
Form f_exitcheck                                                  *
When User Exit from the Transaction then Raise Confirmation message*
C_ANSWER <-- OK or Cancel.                                       *
FORM F_EXITCHECK CHANGING C_ANSWER TYPE CHAR1.
Security Check.
C_ANSWER = C_CANCEL.
CALL FUNCTION 'POPUP_TO_CONFIRM_DATA_LOSS'
    EXPORTING
      TITEL = TEXT-039
    IMPORTING
      ANSWER = C_ANSWER.
ENDFORM.                    "f_exitcheck
Screen Numer : 9000
Line:------
PROCESS BEFORE OUTPUT.
MODULE STATUS_9000.
CALL SUBSCREEN: SELECTIONSCREEN INCLUDING SY-CPROG G_SELECTION_DYNNR.
MODULE CREATE_ALVGRID.
PROCESS AFTER INPUT.
MODULE EXIT_COMMAND AT EXIT-COMMAND.
CALL SUBSCREEN: SELECTIONSCREEN.
MODULE USER_COMMAND_9000.
pls reward if it is useful

Restrict group of articles in a total planning while using reorder point pl

Hello Experts,
Iu2019m in the process of setting up MRP for my customer. I have about 70 plants in the system and roughly 14.000 articles. Not all articles are planned in all plants but in at least one plant all articles are.
Some articles need to be planned every day, others only ones a week. We are planning to use automatic reorder point planning.
Do I understand it correct, that when I do a total planning in the back ground the planning calendar will only be taken into account when I do time phased planning? In other words, all articles will be planned every planning run when I do a total planning using reorder point planning?
IIf my understanding is correct, is there a way to restrict the group articles in a total planning run while using reorder point planning?
Kind regards,
Rudy

The MRP run is executed either at plant level or MRP area level
And all materials within such level (which do not have the ND) are considered in the MRP run.
It is is possible to exclude materials or restrict the MRP run based on a user exit (see the user exit field in the lower part of MRP run selection screen)

Adding custom fields in article master transaction - MM41.

Hi ,
Please find my requirement below.
Create a new custom field in the MM41->Logistic Distribution View->Other Logistic data.
The new field would be Shelf life which would be added in MARC table MARC-ZIPRKZ.
Now I would like to know how to bring this enhanced field MARC-ZIPRKZ into the Other Logistic data screen of MM41.
Have seen lot of discussion in the community. But a clear step by step procedural advice and guidance is highly appreciated.
Regards
Siva

Hi Siva:
Modification free enhancement of the article master is common. Part of this implementation is technical and part of this is functional configuration.
From a functional perspective, you'll want to consider far more than what you have indicated. For example:
MM41/42/43 Screen Sequence
Reference Handling – Field Selection Groups
Data Retention Levels / Copy Rules (e.g. when appending MARC)
Change Pointers
Conversion / Data Loading / ALE ARTMAS Inbound
ALE ARTMAS Outbound
MM46 Article Mass Update
WRFMASSMAT Integrated Mass Change
F4 Help / Check Tables
Text Tables / Translation
As far as data retention levels for extended fields, you can distribute customer-defined fields for MARC and other tables without including new segments in the IDoc.
Please consider:
Create Programs for Customized Subscreens
Menu Path: SPRO > Logistics - General > Material Master > Configuring the Material Master > Create Program for Customized Subscreen
Read the IMG documentation here!
Screen SequenceMenu Path: SPRO > Logistics - General > Material Master > Configuring the Material Master > Define Structure of Data Screens for Each Screen Sequence
Assign Screen Sequence to Article TypesMenu Path: SPRO > Logistics - General > Material Master > Configuring the Material Master > Maintain Order of Main and Additional Screen
BadI and User Exit for MM46
BadI for WRFMASSMAT (see SAP Note 1024725)

Lead Time Demand on REORDER POINT REPORT ??

Hi ALL,
Hope you all doing greate , I am very new in Re order point Inventory Planning Method. I have done all the configuration as;
i - Creates an Item and assign it to the specific IO where I am selection the Planning method as Reorder point and enter the other paramters under the lead time tab I am seleting the total lead time as 5.
I have define safty stock as 100 quantity.
I have configure the Forecast Set and forcast under it which contain an Item with Current Quantity is 1000 now I have call the Report to run so I am getting the rest of the thing except value Lead Time Demand ??
kindly help me in this regards, I would be so kind of you.
Thanks
Mohammad Younus

Hi,
There is a standard report that shows the actual average LT compared to the master data definitions. You can also see the details, and even update master data automatically if you want; WPDTC.
Regards,
Mario

Automatic reorder point planning

Hi Gurus,
Cud somebody guide me on the Basic settings required for AUTOMATIC REORDER POINT PLANNING'VM',Including SPRO settings.I cudnt find an answer for this from previous FORUMs.
Kindly give me u r suggestions or aslo suggest some good links for PP documents or links concerning with Automatic reorder point planning and its settings.
THNX in ADVANCE
HKR

hi HKR
In automatic reorder point planning, both the reorder level and the safety stock level are determined by the integrated forecasting program.
The system uses past consumption data (historical data) to forecast future requirements. The system then uses these forecast values to calculate the reorder level and the safety stock level, taking the service level, which is specified by the MRP controller, and the material's replenishment lead time into account, and transfers them to the material master.
Since the forecast is carried out at regular intervals, the reorder level and the safety stock level are continually adapted to the current consumption and delivery situation. This means that a contribution is made towards keeping stock levels low.
http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d256344af11d182b40000e829fbfe/frameset.htm
regards
sachin

Automatic reorder point planning -forecast view

Hi
Our client want to implement automatic reorder point Planning.
Reorder point quantity was maitained from last 3 years but MRP type is 'ND' as they are not using MRP.
Now i am changing MRP type to:VM and in forecastting view: i maintained model as:D constant model period indicator:M
His periods:60 , forecast periods:12 initialization:X tracking limit:4000 selection procedure:2 reset automatically
Is it ok ? than can i run MP30. and the client wants to run for many materils(2000).
How can be run for many materials.?
Regards,
srihari.M

Dear,
In automatic re-order oint planning , system uses past consumption data (historical data) to forecast future requirements. The system then uses these forecast values to calculate the reorder level and the safety stock level, taking the service level, which is specified in MRP2 view, and the material's replenishment lead time into account, and transfers them to the material master.
Since the forecast is carried out at regular intervals, the reorder level and the safety stock level are continually adapted to the current consumption and delivery situation. This means that a contribution is made towards keeping stock levels low.
From MP30 you have to executed forecast and system has generated forecast values and updated safety stock and reorder point also. Only thing to remember is you have to maintain service level in MRP 2 view of material master when you use VM- MRP type to calculate safety stock and reorder point
Find bleow the set up following set up for automatic re-order point planning :
1.Material Master Set up : Maintain all the relevent parameters from MRP1 to MRP4 view , Forecasting View
1.MRP Type -VM , Lot Size -EX
2.Procurement Type -E for FG and F for ROH
3.Planning Startegy -10 or 40 in FG/SFG and 20 for componenet
4.Planned Delivery Time in MRP2 VIEW
5.Indiviaul/Collective Indicator - 1/2 based on your requirement in MRP4 View
6.BOM Explosion -Keep it blank
7.Service level percentage -MRP2 view
8.Maintain Forecastin view data like model selection , Histry period , period indicator , Forecast control pramaters ,
10.Make sure that you have min 12-8 monhts total consumption update in Forecasting view .
Configuration : InSPRO -MRP -Check MRP Type -VM-check the details like Re-Orde point .Safety Stock both the automatic calcvualtion box are marked .
Finally as a sample test , select any material -mm02-execute forecast in mm02-forecasting view -exectute forecast -then save .Run MRP in MD03-1,1,3,3,1.NETCH indicator and check the result in MD04
HOPE IT WILL HELP. PLEASE REVERT BACK.
Regards,
Alok Tiwari

MASS Article Master reorder point update thru program

Similar Messages

Maybe you are looking for