Mass change Condition valid to dates into Info record
Hi,
is there any mass changes for condition validity to dates into purchase info record?????
i have check into MEMASSIN, there is field for conditions valid to Date,
Pl. guide .
Regards,
Devendra
Hi,
It is not possible to change validity date using MEMASSIN - Mass Maintenance t code.
You need to create LSMW with recording method to achieve this. we are doing the same.
It is very easy. And take care that while recording select the validity button and click executive to record the do not double click on the validity tab.
Reg
Similar Messages
-
Restriction of Validity start date in Info record ME11/12
Hi,
Can anybody suggest how can we put a check in validity start date of conditions so that back date is not selected while putting the price/conditions in info record.
Regards
sachinhi..
When u create info-record for any comabination of material and vendor..u go to condition tab ..where ehile defining condition type and their details u can specify their validity....
and after saving this..if u again want to see that condtion type then it prompt u for "choose validity" for which u want to see the condition type...
Hope it works,,
Thanks.. -
Mass Change Of Vendor Code in Purchasing Info Records
Hi All,
I have one query and I already search a lot for it but didn't find any specific solutions.
I want to change a vendor code in around 1000 Purchasing Info Record, I had already tried for Mass Maintenance Through T. Code - MEMASSIN, But I found Vendor field in New Values as Grey Field.
Is there any other way to mass change of Vendor in Purchasing Info Records.
Why vendor field is showing me as a grey Field?
Thanks In advance
With Regards,
Patanjali BhagatHi Govardhan,
Pl correct me if i am wrong....EINA-RELIF field is to check and uncheck for regular vendor...It will not change the vendor ID...
EINA-LIFNR...is the field to change vendor no.., but i can not see this field name is not there in the table...
Still i think that we can not change the vendor id's once it is created for Info record...
Pl correct me if am wrong.
Uts -
Help reqd on Changing the Valid from "date" for both BOM & Routing
Hi all...
Pls advise me how to do the changing of Valid from "date"....
Is there any process in CC01 or ECM???....
pls reply me in detail step format (step by step analysis)....
I wrongly created in CS01 and CA01 as 05.10.2007 as my valid from date instead of 01.10.2007.....
How to change to my actual one......
I dont know how to change it exactly.....as im beginner in SAP...pls take this into consideration...and post ur replies imm.
Pls reply me in detail....will be rewarded at the end while closing this issue.
thanks & regards
sankarDear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal -
How to change the valid from date of the bom header?
ECM is active in the system.
I want to change the valid from date of the BOM header with the help of a change number.
How can I change it?Hello
Lets assume that, we are going to change Management for controlling Valid From date
Steps to be followed for creation of Change No
Tcode CC01 for Change No
Click on Change Master
Once you enter into Change master, maintain the description
In the Valid from Date, maintain the date from which you BOM should be current
Maintain the Status (01)
Click on Ojbect Type, maintain for which Object types is the Change no needs to be active i.e. for BOM, Rtg, etc
save the Change No
After the change no is created
Enter the Change No during the creation mode of BOM
THe system copies the Valid from date from Change No -
Mass change of Asset Master data
Hi!
Is there any transaction code for mass change of asset master data. I need to change Depreciaiton start date for all assets?
regs,
RameshUse OA02 - Mass change, create a substitution. Add in all prerequisites and save it.
Go to AR01, execute it for the list of assets to be changed and create a worklist for the same.
Execute the worklist in AR31 and refresh it till all changes are completed. -
Mass change of customer master data
Hi,
I would like to do a mass change of customer master data.
I need to remove the international VAT register number for local Polish customers, as we will use the local NIP number for these customers.
Which transaction code do I need to use?
Are there any things I should keep in mind?
Thank you.
Kind regards,
LindaHi,
You haev a Transaction called MASS. Please check whether you have the authorization for the same. If you have then it is very much easy for you to maintain the same. If you dont have the MASS authorization then you have to create a LSMW and then make the change.
Steps:
1. Enter MASS
2. Object type - Select KNA1 (avaialble in the drop down) and execute
3. You should have an option "Customer master (VAT registration numbers general section) " with table KNAS. Execute
You will be able to choose those customers whom you want and make the changes.
Hope this should help you. -
Wants to change the validity from date in BOM
Hi,
We have created BOM by mentioning valid from date 21.08.2018.
Now we need to change that valid from date 21.08.2018 to 21.08.2008.
How can we do that?
thanks/regards
vishHello,
If you are creating the BOM wr.to change number & if the change number date is lying in future. System allows you to change the effective from date for the ECN, which in turn BOM effective date also get change automatiocally. T code CC 02 for changing the date through ECN
Maruti -
Supply Option dates in info record
Hello
My users specified "Available From" and "Available To" dates in Info Record. They would like these dates to be automatically emptied when both dates are past dates.
Can this be done ?
Thank you.Our users would like to use info record to temporarily (for a period of time) block a PO to be assigned to a vendor. One option is to specify the available from and available to fields in info record.
Once the period is over, the users would like the two dates to be emptied so POs can be assigned to this vendor again.
Thanks, -
Mass change 'Valid-to' date in price records
Hi All,
Can you please suggest me best possible method to change condition records of condition Type.
My requirement is to udpate 'Valid-to' dates of large number of condition records.
Thanks and Regards,
Sachin M MHi All,
Can you please suggest me best possible method to change condition records of condition Type.
My requirement is to udpate 'Valid-to' dates of large number of condition records.
Thanks and Regards,
Sachin M M -
In Service contract, to change the valid form date on service code level.
Hi.
I want to change the price valid form date on service code level ( i.e. in condition) in Service contract.
I know i can do that with ME32 transaction but i have lot of Service contract with more then 10,000 line items
Is there any way that i can change in mass based on Service contract no. wise.???
Thanks in advance..
Edited by: VIKRANT HANDE on Sep 15, 2009 9:11 AMPlease check in KON* series table in SE16N transaction. I guess KOHN table may help you out. You can see other similar tables.
In any one of the table you will find validity data. -
What would change a file modification date into the future?
Of late, I've been noticing that [apparantly random] files that have NOT be accessed are showing a modification date somewhere in the future.
I couldn't figure out why zip was adding files I hadn't touched to an archive of files changed since a certain date. Looked in Finder, and they have dates from 1 to 20 some years into the future, in the modification column, and sometimes, no creation date.
Also, files deep in the contents of some apps are losing me as an owner, leading zip to tell me "access denied".
Any thoughts as to what's going on? Other than the paranoid; there's some evil virus, whatever, running amok.Did you check the code in your template.dwt file for errors?
http://validator.w3.org/
Did you save over or rename your original Template.dwt file?
Did you move your Template.dwt file from it's Templates folder?
Nancy O. -
Mass change of vendor purchasing data: price cat.(LFM1-MEPRF)
Hi all,
I faced a problem of Mass change vendor's price cat.
IN T-code XK99,
I select table LFM1,LFM2 for the initial screen.
Then i input a vendor in the selection criteria screen,
It always say no data selected.
But actually the vendor is existed!!!
There is still nothing to select even I just input the purchasing organ.
Does anyone faced similar issue?I try MASS and another Vendor 'CA024' that is the same result...
Also, I found that if i input company code '1000'
it will pop up a dialog screen say 1244 rows has been selected. And ask me to decide which action to do:
1. display all records
2. chng. in background
3. cancel
When i click display all records, it back to screen and say no data meet selection criteria again.... -
Mass Change of Start Cycle Date of Plans
Hi All,
Does any know of any standard Program or Transaction available for changing the Start Cycle date for Single Cycle Plans in Mass.
Regards,
ManishHi Manish,
Theres a standard T-Code available: MCH01.
Please refer to [Changing Maintenance Plans With the Mass Maintenance Function|http://help.sap.com/saphelp_dimp50/helpdata/en/95/83833cb67a8955e10000000a114084/frameset.htm].
Thanks,
Amit.
Edited by: Amit Saxena on Nov 5, 2008 2:27 PM -
Change of valid from date in routing
Dear All,
How can i change the routing "valid from date".
When i am creating a prod coder in co01 its throwing a message that routing is not found so when i wwent to co02 it is showing that valid from 09.01.2012 but i need production order from 01.01.2012.
Plz help.
Thanks.Hi,
There is a work around to change the validity of routing without using ECM in this particular situation
1) While creating routing in CA01 you can change the key date to some past date say 01.01.2012.
2) If already routing exists (one GC available) for same material and group number you can create another GC with past date and use the new GC for Production order by changing the old GC status to 1
Be sure of implications of creating master data in past and may not be a standard practice.
you can try and hope useful.
Regards,
Brahmaji D
Maybe you are looking for
-
My 'open link in new tab' setting opens selection on a completely different page! HELP!
Seemingly out of the blue, when I right click on something I would like to open in a new tab... the selection now open up on a entirely new and separate page. This page then continues to be the 'go to' page for all subsequent 'Open link in a new tab'
-
How to use a managed bean in a bounded task flow without definig it in adfc-config
Dear all I create a bounded task flow without page fragments (the pages are jspx), i created a jspx page with a button that its action has bounded to a managed bean function. i defined the managed bean on the corresponding bounded task flow, but it d
-
How to remove the "Sign Out" in OBIEE 11g?
How to remove or hide the "Sign Out" option from Dashboard in OBIEE 11g? Edited by: Siva Prasad on Jul 6, 2011 6:20 AM
-
while watching vids and having multiple views (vids) up the flash player plug in fails and shows a white screen with a "!" saying error need latest flash player installed to view content. I reinstall the flash player only to be told it is already in
-
Problems updating firmware on X6-00
Since 2010 I am the owner of a Nokia X6-00. At first I didn't have any problems with updating the system-software (firmware), but now I have a serious problem. How come? Recently I had to give my X6-00 a hard reset (could not add a internet access an