Mass change in BOM - field "Relevant to sales"

Hi All,
How to do Mass change in BOM for the field "Relevant to sales" ?
Thanks.
Marianna

Hi,
Need to use CS02 recording in such a way that you can change every item in a particular BOM.
e.g. First get into HEader Material BOM (CS02), once you've General Item Overview screen, do NOT directly go to item details of any item.... first click on tab-'Position', enter either Item Number or Component or both and then go to item details to change the relevancy indicator. Once changed for a particular item, save the BOM & come out of it. Then try for next item & so on....
Again this is my initial thought, you need to try out few recording options like this and then chose the most suitable one. Take help from ABAP expert if any available.
Off-course, initiallly it would take time to set-up LSMW but later on just need to create a data-file & do the mass changes.
Hope it will help.
Regards,
Anup

Similar Messages

Mass change in bom

dear experts
how to add materials in mass change in BOM with CS20 or LSMW or BDC.
regds
prince

HI
Check T code CS20 or thru workbench for CEWB you need to activate working area in OP77 select SAP_item .
check this thread
Mass changes for BOM Base Qty
Regards
Anupam Sharma

Mass changes in BOM

Dear Experts....
I want to delets some items from all BOMs.Items are specially tools having a matrial type ERSA. How to delete same items from all BOMs.
Rakesh

Hi,
You can carryout the Mass changes of BOM using the Tcode : MASS.
Where you need to select the object type related to BOM and perform the mass change.
It can be done through CS20 and CEWB also.
Hopwe this will help you.
regards
radhak mk

Mass changes of BOM with ECM

Hi
I wanted to change into BOM by Cs20 Mass changes into BOM with ECR Number which is created throgh CC31 .
but system is not allowing me to do the same , pl tell me where is GAP.
Rgds
Pankaj Agarwal
Edited by: Csaba Szommer on Dec 28, 2011 10:43 PM

Hi Mario
For ECR i have done the same and even that is Released and also Status with ECO. but still System is showing the same.
Mario one more thing i have written on SDN pl have a look on Followup material , i have read about your post MRP-MPN.
we are also having the scenario of alternate Material Within the Bom and also wnat to be correct the Procurement Proposal.
how it will be helpfull by the MPN-MRP Set function. i am also searching the same thing into Follow up Material . pl have a look on that.
yours reply will be highly appericiable...
Rgds
Pankaj Agarwal

Mass Change of TEXT field

Hi
I wanted to carry out Mass change of Text field in 2000 Financial documents, Can anyone give the best way to do the same?
Thanks

Hi,
Execute the FBL3N report by selecting the Documents using Dynamic selection mention
a) Document no's
b) Fiscal year
mention company code and execute the report and use mass change option to make changes.
The following accounts may not appear in the listing
a) Recon accounts in case these are not line item managed.
b) If any of the documents have been archived.
If you are on ECC6.0 or higher then you can use the report FAGLL03 report this would list the line items in the documents even if the Recon accounts are not line item managed.
You can also record a SECATT/LSMW to do this for you in case you want different text for each of the line item.
Regards
K.R

Mass change of account assignment group in sales order

Dear All.
We have created a new Account assigement group and assigned revenue accounts to it.When the orders are registered this data will flow from the master data automatically.Where as in the open orders i need to make the changes manually.Is there a provision in std SAP to Mass change a filed in sales order .Like we do in MM17 or XD99 .Kindly let me know.
Thanks in advance .
regards,
K.Vivek

Hi,
Go to XD99,
1. Select the table ie KNVV in the tables tab, select the fields tab and select the fields u would like to change for eg Acct assignment group
2. Execute the report
3. U will come to the screen where u can restrict the entries.
Enter the criterion say
Cust: Test 1
Sales Org 8000
Dist 08
Div 08
4. Again press execute
5. Enter the new values you would like to have
6. Now select columns of the new values and press carry out mass maintainence button in the new values area
7. Press Save
8. u will then receive a success message
Best regards
Mahesh

Mass change of BOM item and BOM item catergory

Hello Everyone,
I have a need to complete a mass change of a BOM item with another, usually I use transaction CS20,this works o.k. but this time I'm also changing the material with a new item catergory, for example a stock item with a phantom item.
Does anyone have an idea how to complete this task.
Kind Regards
Frankie

Hello,
Thankyou very much for your reply.
I did try adding the new material using CS20 but all the BOM qty's are different and as you know you have to complete this field, so it would mean changing one at a time, I attacked this issue from a different angle and created an LSMW so I can Mass delete the parts but then use this program to change the BOM item to the new part.
Thanks again for your reply
Kind Regards
Frankie

Transfer of changed order BOM from quotation to sales order

Good morning!
Please consider the following scenario involving variant configuration:
A quotation is raised in the system, and the values of the characteristics are assigned. Therefore a order BOM is generated (for the quotation), and that order BOM is changed manually using tcode CU51 (for cost estimates purposes). When it is saved, the system updates the BOM in the quotation automatically (ok, this is a desired behavior).
Although when we create an sales order with reference to that quotation, the newly chnaged order BOM is not copied to this new order, the order BOM is redetermined instead.
How can I make the system to copy it from the quotation properly?
Thanks in advance!
Adriano Cardoso

Thanks for the reply. I have verified this note and it seems more toward the BOM explosion in the sales documents themselves than for the modifications made afterwards (CU51 changes in BOM, for example).
After realizing that, I´ve made a little research and found the Order Engineering Workbench possibility, which seems to fulfill all our requirements regarding this point. I looked all over SDN and haven't found too much input about it. In the SAP VC book, says it is not part of the SAP ERP, but a add-on.
So, you don't happen to have any idea of how can we check if it is activated / installed in our system or not? We are on version 5.0.
Thanks!
Adriano Cardoso

Mass change of certain fields thru list of equipments IE

Hi,
Instead of writing LSMW, i am looking for mass change option for list of equipments available thru IE05 under Go To----> Carry out a mass change.
Its giving me a error message :
Objekt PM_MASS_TECH_OBJECTS is not maintained
Message no. BL010
Diagnosis
An application log entry is to be made for object PM_MASS_TECH_OBJECTS. This object is, however, not maintained as an application log object.
Objects and subobjects of the application log are created using transaction SLG0.
System Response
The program had to be cancelled.
Procedure
Inform the system administrator.
I went thru the forum link: Mass Change of Functional Locations - error message "Objekt PM_MASS..... and read the note 1166820.
Please tel me the steps to do in order to include Object : PM_MASS_TECH_OBJECTS
Object Text: Mass Change of Equipments and Functional locations
in table as per the note...
Please provide some detailed steps..
Authorization is no issue as i have profile: SAP_ALL
Thanks
Murad..

Hi All,
i'm trying to change a filed value as null. i.e. a value is maintained in pp work centre field for functional location. i want to delete this value to keep this field as blank. By using this mass change functionality i'm not able to do so. can any body hep me out to this problem.
Raj

How to change schedule line fields when save sales documents in va01/va02

Hi, every Experts,
I want to change schedule line when save the sales documents in va01 or va02, such as change delivery block or schedule line category.
of course, can use user exit USEREXIT_SAVE_DOCUMENT_PREPARE, but I do not know to use this user exit, I am newer about ABAP.
Please help me , thanks.
best regards
Passion Wu

Hi,
For changeing schedule line: select line item, GOTO --> item --> schedule lines --> enter the confirmed qty.
USEREXIT_SAVE_DOCUMENT_PREPARE program is MV45AFZZ
For your reference
USEREXIT_SAVE_DOCUMENT_PREPARE - Can I use in button, but skip
regards,
Mohanprabu C

Mass change in Assignment Field

Hi
I want to change assignment field for 30 documents together. Let me know if its possible.

Dear,
There may be suggestions that you can do this by selecting mass option from line item display but that will allow you to put only one value for all the fields.....
So if you want to change Assignment field with different value to these 30 docs then it can be manually or BDC....I know this may be a tedious ot weird solution but this is what we have to live with....
Regards,
Chintan Joshi

Mass change in BOM status to inactive

Hi,
I want to change the status of BOM Alternate header to inactive. I want to do the same for some 1000 BOMs in one shot. Is there a way to do the same.
Please suggest

Hi,
You can use CEWB to make it inactive.
or
Create a BDC using CS02.
Regards,
Vishal

Mass change of BOM

Dear experts,
I want to change BOM for lot of material
For that I want some procedure
I tried CS20 but no use.
Plz give me some solution
Regards,
sameer

Hi,
Using discontinuation indicator also you can achieve this.
Need to define the simple discontinuation or parallel discontinuation. Need to define the follow up material also. By doing this automatically the system will replace the material.
Regards,
V. Suresh

Mass Changes to Header - Sales Order

Hi gurus
I have a requirement to be able to make mass changes on the some of the sales order header fields such as user statuses etc. I know CRMD_SALES_MASS is available but this only takes care of item level changes.
I have actually found a Mass update header table and have added my fields in but dont know how to trigger it or what i a missing.
any information would be greatly apprecaited and rewarded
Thanks
Jai

Hi,
I think you can do the changes in the subroutine USEREXIT_SAVE_DOCUMENT in the include MV45AFZZ.
Create a include program inside the subroutine USEREXIT_SAVE_DOCUMENT and do the coding based on your requirement
i think it will help u.
Thanks
Arul

Material BOM mass change error

Hi gurus,
When doing mass change of BOM via tcode CS20, i'm getting below error result.
The following messages were displayed:
Material BOM 00016478 : Delete Item(s)
   19760                                  STM-220-(20UP)78DZ*C06U029(XC06U029)Sn 200
   0130 L 01/01/2002 12/31/9999              1.00 PC     >               1.00 PC
   No batch input data for screen SAPLSDDT 0010
   Folder created/extended
I wonder what does "No batch input data for screen SAPLSDDT 0010" mean? what should i do to correct this?
I also noticed that all items on the picklist were grayed out though i can still click on the checkbox button to select the items that I want to be deleted.
Has anyone encountered this problem? I usually use CS20 during BOM mass change and haven't encountered this kind of problem.
Hope to hear advise from you all on how to deal with this.
Thanks and regards,
Chad

Dear,
Error message no is 00344 ?
Please refer the OSS note Note 493096 - CS20: No batch input data for screen SAPLCSDI and   Note 180686 - For CS20
Regards,
R.Brahmankar

Mass change in BOM - field "Relevant to sales"

Similar Messages

Maybe you are looking for