Mass change in bom

dear experts
how to add materials in mass change in BOM with CS20 or LSMW or BDC.
regds
prince

HI
Check T code CS20 or thru workbench for CEWB you need to activate working area in OP77 select SAP_item .
check this thread
Mass changes for BOM Base Qty
Regards
Anupam Sharma

Similar Messages

Mass change in BOM - field "Relevant to sales"

Hi All,
How to do Mass change in BOM for the field "Relevant to sales" ?
Thanks.
Marianna

Hi,
Need to use CS02 recording in such a way that you can change every item in a particular BOM.
e.g. First get into HEader Material BOM (CS02), once you've General Item Overview screen, do NOT directly go to item details of any item.... first click on tab-'Position', enter either Item Number or Component or both and then go to item details to change the relevancy indicator. Once changed for a particular item, save the BOM & come out of it. Then try for next item & so on....
Again this is my initial thought, you need to try out few recording options like this and then chose the most suitable one. Take help from ABAP expert if any available.
Off-course, initiallly it would take time to set-up LSMW but later on just need to create a data-file & do the mass changes.
Hope it will help.
Regards,
Anup

Mass changes in BOM

Dear Experts....
I want to delets some items from all BOMs.Items are specially tools having a matrial type ERSA. How to delete same items from all BOMs.
Rakesh

Hi,
You can carryout the Mass changes of BOM using the Tcode : MASS.
Where you need to select the object type related to BOM and perform the mass change.
It can be done through CS20 and CEWB also.
Hopwe this will help you.
regards
radhak mk

Mass changes of BOM with ECM

Hi
I wanted to change into BOM by Cs20 Mass changes into BOM with ECR Number which is created throgh CC31 .
but system is not allowing me to do the same , pl tell me where is GAP.
Rgds
Pankaj Agarwal
Edited by: Csaba Szommer on Dec 28, 2011 10:43 PM

Hi Mario
For ECR i have done the same and even that is Released and also Status with ECO. but still System is showing the same.
Mario one more thing i have written on SDN pl have a look on Followup material , i have read about your post MRP-MPN.
we are also having the scenario of alternate Material Within the Bom and also wnat to be correct the Procurement Proposal.
how it will be helpfull by the MPN-MRP Set function. i am also searching the same thing into Follow up Material . pl have a look on that.
yours reply will be highly appericiable...
Rgds
Pankaj Agarwal

Mass change of BOM item and BOM item catergory

Hello Everyone,
I have a need to complete a mass change of a BOM item with another, usually I use transaction CS20,this works o.k. but this time I'm also changing the material with a new item catergory, for example a stock item with a phantom item.
Does anyone have an idea how to complete this task.
Kind Regards
Frankie

Hello,
Thankyou very much for your reply.
I did try adding the new material using CS20 but all the BOM qty's are different and as you know you have to complete this field, so it would mean changing one at a time, I attacked this issue from a different angle and created an LSMW so I can Mass delete the parts but then use this program to change the BOM item to the new part.
Thanks again for your reply
Kind Regards
Frankie

Mass change in BOM status to inactive

Hi,
I want to change the status of BOM Alternate header to inactive. I want to do the same for some 1000 BOMs in one shot. Is there a way to do the same.
Please suggest

Hi,
You can use CEWB to make it inactive.
or
Create a BDC using CS02.
Regards,
Vishal

Mass change of BOM

Dear experts,
I want to change BOM for lot of material
For that I want some procedure
I tried CS20 but no use.
Plz give me some solution
Regards,
sameer

Hi,
Using discontinuation indicator also you can achieve this.
Need to define the simple discontinuation or parallel discontinuation. Need to define the follow up material also. By doing this automatically the system will replace the material.
Regards,
V. Suresh

Material BOM mass change error

Hi gurus,
When doing mass change of BOM via tcode CS20, i'm getting below error result.
The following messages were displayed:
Material BOM 00016478 : Delete Item(s)
   19760                                  STM-220-(20UP)78DZ*C06U029(XC06U029)Sn 200
   0130 L 01/01/2002 12/31/9999              1.00 PC     >               1.00 PC
   No batch input data for screen SAPLSDDT 0010
   Folder created/extended
I wonder what does "No batch input data for screen SAPLSDDT 0010" mean? what should i do to correct this?
I also noticed that all items on the picklist were grayed out though i can still click on the checkbox button to select the items that I want to be deleted.
Has anyone encountered this problem? I usually use CS20 during BOM mass change and haven't encountered this kind of problem.
Hope to hear advise from you all on how to deal with this.
Thanks and regards,
Chad

Dear,
Error message no is 00344 ?
Please refer the OSS note Note 493096 - CS20: No batch input data for screen SAPLCSDI and   Note 180686 - For CS20
Regards,
R.Brahmankar

Mass component change in BOM

hi
i want to mass change some components in BOM. For example in the BOM i have 10 components. Now i want to change 5 components in the BOM
I have around 500 FG How to do that? Is it possible in LSMW?. or CS20?

It is better to go for getting a BDC developed for all the mass changes in the BOM.
Using CS20 you can only change a single component and replace with a new material. I think BDC is the best alternative.
Hope this helps you.

Mass change in component Scrap % in BOM

Hi Guru,
Can someone explain me the process of mass change in component scrap % in BOM ? I have to make zero coponent scrap % in BOM for all materials.

Dear Vikash,
Check with t-code CEWB
for this you need to define work area in OP77
Regards
Madhu

Mass change in collective BOM's

Hello Experts,
I want to change the quantity of a single material in several BOM's already created in the system, there are atlest 2000 BOM's having the same qty of that material which i want to change.
I had a look to the MASS change option in the system but i was not able to resolve my problem.
Please Help.
Regards
Prashant

Hi,
Please try transaction CS20.
If resloved then let me know.
Regards,
Jigar

Can't quey by Bom mass change No after implementing it.

when running Bom mass change , i cant query by its number ..is that acceptable ??

See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help.

Item range in BOM mass change

Does anyone know the criteria (item_id,creation_date,etc) by which Oracle interprets the Items from a given item range in BOM Mass change.

Purely alpha-numeric.
-Gerry

CEWB: BOM item Mass change new value Missing

Hi Guru's
When i plan to do BOM item lead time offset mass change in the (CEWB) Engineering Workbench,
i have selected the ITem and Column LT offset, and in entra when i select the mass change, system showing a error.
" no item selected", (new value and replace indicator is missing
.Can u help whether we need to apply any notes ?
Regards
GS
Edited by: GNANASEKARAN Suresh on Aug 1, 2011 4:40 AM
Edited by: GNANASEKARAN Suresh on Aug 1, 2011 4:51 AM

Upload screenshots of the step which you're taking in CEWB & the error you notice to some portal & paste the link here for a clear understanding.
Also which version of SAP you're working on & what is the support pack level ? (If you're not sure about it, then check with your system admin for the same).

While trying to change a BOM with transaction CS02, a runtime error appears

While trying to change a BOM with transaction CS02, a runtime error appears.
In intial screen he entered material ,plant BOM usage and date valid from after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
Developer trace
ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
Error Code SAPSQL_ARRAY_INSERT_DUPREC.
Module $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
Function HandleRsqlErrors Line 775.
RABAX: level LEV_RX_STDERR completed.
RABAX: level LEV_RX_RFC_ERROR entered.
RABAX: level LEV_RX_RFC_ERROR completed.
RABAX: level LEV_RX_RFC_CLOSE entered.
RABAX: level LEV_RX_RFC_CLOSE completed.
RABAX: level LEV_RX_IMC_ERROR entered.
RABAX: level LEV_RX_IMC_ERROR completed.
RABAX: level LEV_RX_DATASET_CLOSE entered.
RABAX: level LEV_RX_DATASET_CLOSE completed.
RABAX: level LEV_RX_RESET_SHMLOCKS entered.
RABAX: level LEV_RX_RESET_SHMLOCKS completed.
RABAX: level LEV_RX_ERROR_SAVE entered.
RABAX: level LEV_RX_ERROR_SAVE completed.
RABAX: level LEV_RX_ERROR_TPDA entered.
RABAX: level LEV_RX_ERROR_TPDA completed.
RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
RABAX: level LEV_RX_END entered.
RABAX: level LEV_RX_END completed.
RABAX: end RX_RFC
In sm21
Perform rollback
Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
     Short dump "090618 110101 donalda 11557 " generated
Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
Exception              CX_SY_OPEN_SQL_DB
       Occurred on     18.06.2009 at   11:01:01
The ABAP/4 Open SQL array insert results in duplicate database records.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"RKE_WRITE_CE4__BPS1" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)
How to correct the error
The exception must either be prevented, caught within the procedure
"RKE_WRITE_CE4__BPS1"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
Use an ABAP/4 Open SQL array insert only if you are sure that none of
the records passed already exists in the database.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
"SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
"RKE_WRITE_CE4__BPS1"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.

Hi ,
you are getting beacuse u are trying to do mass update to database.
Please check that below note are applicable to your system.
Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
Note 869534 - AFS MRP doesn't work properly with all BOM item categories
Thanks Rishi Abrol

Mass change in bom

Similar Messages

Maybe you are looking for