Mass change of the Original System

Hello Experts!!!
We need to do a massive change of the original system to avoid repair tasks. I know that thru SE03 or SM30->TADIR is possible, but we need to do it to all objects in the system.... I think It might exist a standar tool for that... what do you think???
Thanks a lot!!!!
Frinee

Also interesting: transport of copies / relocation of objects
http://help.sap.com/saphelp_nw70/helpdata/EN/57/38e1a94eb711d182bf0000e829fbfe/frameset.htm
Thomas

Similar Messages

  • Hierarchy R3PRODHIER may only be changed in the original system

    Hi Experts
    I have created a new Product Hierarchy in R/3 when i try to replicated them into CRM by using initial replication of DNL_CUST_PROD1.system throwing an error saying :  Hierarchy R3PRODHIER may only be changed in the original system R3LNT200. ....in the SMQ2 before doing initial replication of  DNL_CUST_PROD1 status was green.
    And again i try to replicated the DNL_CUST_PROD1 by  reguest load which has run successfully and 3 blocks are generated then  i run the initial replication of Material but status of initial replication status in waiting. which is not run i mean to say.
    then i again  created a Request load for Object Material and which is run success fully
    but my problem is i did not see the  new hierarchy and products too in Table COMM_PRODUCT
    .and when i see status of the in DNL_CUST_PROD1in R3am1. which is in ABORT .
    Hence i request you could you please help me inorder to make green status of the DNL_CUST_PROD1 in r3am1 so that i can able to nun material successfully
    i would appreciate you help
    thanking you
    Regards
    Swathi

    Hi Swathi,
      I'm assuming this development is copied from your production.
    For example: Go to COMM_PRODUCT table and check the log sys field. Now it will show the Production Logical System. So you need to convert this value.
      After the client copy, basis needs to execute BDLS transaction.  This transaction is used to convert the logical systems in all the Database Tables.
         Perform this conversion only for Client Dependent Tables.
         Execute below conversion in CRM Development Box
                       CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                       ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
          In ECC Development Box
                       CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                       ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
    Regards,
    Bhanu

  • Set ZATTR_PROD may only be changed in the original system

    Please,
    Iu2019ve enhancement the PRODUCT_CUSTOMER2 BADI to change product attribute type when Iu2019m replicating products from ECC to CRM.
    When I try to replicate the material from ECC to CRM thereu2019s the follow error:
    "Set ZATTR_PROD may only be changed in the original system"
    How can I solve it?
    Thanks in advance
    Edited by: Ronaldo Alvarenga on Oct 25, 2010 11:17 PM

    Hello,
    Maintain an entry for Z* settype in below path:
    SPRO>IMG>CRM>Master Data>Products>Enhancements>Allow Changes to Product Data.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?

    Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?
    Thanks in advance.

    1. On your computer, yes. Use Boot Camp, Parallels Desktop, VMware Fusion, VirtualBox, or similar software.
    2. No; if you use an emulator, it may install system components. Back it up anyway.
    (110033)

  • Not able to change the original system of the object

    Hello
    BW infosource was created in the system Q01 (test) and transported back to D01 (dev).
    I would like to change original system from Q01 to D01 to enable object modification.
    I am not able to change the original system of the object in the tran se03 as  system is disabled.
    Original System          Q01   (grey)
    Any solution for this ?
    thanks

    hi,
    before transporting maintain the settings in the Dev system as follows.
    Open tcode RSA1 in dev system, from Menu goto -- tools -- Conversion of Logical system Names.
    In this maintain the
    Original source system                                   Target source system
    Technical name of R/3 client of test              Technical name of R/3 client of dev system
    This setting has to be maintained while transporting the changes to next system, this ensures that the objects are mapped to the correct source system name on importing and are replicated properly from them.
    regards,
    Arvind.

  • How to change the original system of a CR?

    Dear gurus,
    we have imported some workbench and customizing CRs into a system B mannually from system A,
    there is no transport link between A and B.
    But when we want to import those CRs into system C , which has transportation link with B, we can not found those CRs, i guess because those CRs is release on A ,not B.
    Could you please help me how to import those CRs into system C, just like other 'normal' CRs?
    do i need to modify the original system of the CRs? if so , could you pls tell me how to do that?
    thanks and best regards.
    Jun

    Hi Nicole,
    there are many system objects inside our CR, DDIC, FM ...
    so we can not  change them one by one.
    what we are trying to do is to port a custom solution from one system to another,there is no link between them , and in the target system, those CRs can be transport to other systems normally using STMS.
    we are trying to include those crs into a new cr in the target system , but failed.
    could you please provide more informaiton on how to solve this?
    thanks and best regards.
    jun

  • SAP System is not the original system of the object being edited

    Hi All,
    We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We already completed all post process after system copy.Client is open and status in Golbal modifiable in se06.
    How we can resolve this situation.

    Hello Guys,
    Thks for your input.
    @Vinod,
    We rebuild new development system from the exsisting devlopment system and scrap old one.And yes thats true that new system is not the original system where object was created,its  a replica of old dev to nev dev with SID change.
    @Arjun,
    I already check TADIR table and and its pointing to new SID.
    @Ashok,
    As i said earlier,post intallation is already completed.
    Its a problem for developer who's getting some different format of screen when they editing development object ,like, when we perform manaul corretion in abap code through snote.They can see buttons to insert code line,delete line.
    Thx,Nilesh

  • When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been.  How do I do this without the document changing?

    When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been.  How do I do this without the document changing?
    I need to be able to send it to a PC in order to print it.

    Hard to say what is happening without examining the file.
    If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
    Peter
    ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

  • Mass change of the invoices

    Does SAP provide any transaction code for mass change of the invoice.
    I want to change the value inputed in the reference key 1 of the customer line items already posted, there are 850 line items posted . i want to change the value in the Ref key1 field. Does any Trans Code for us to change as we have in gl, mass reversal etc.
    Best Regards
    Rajesh

    Hi,
    i think the most simple solution is to program a bdc for transaction FB09 or fb02
    -> use bdc-recoreder SHDB
    A.

  • "the current system is not the original system" in uccheck

    Hi  Friends,
    I get a message during the unicode conversion. Can u help me how to rectify this error.And also would be grateful if u can given some links regarding this issue and why this error message is raised.
    "the current system is not the original system" in uccheck transaction of unicode conversion.
    thank you
    chandra

    Do you still need help on this?
    Please refer to SAP notes that  can provide some hints
    #997198     UCCHECK: The current system is not the original System
    #963311     UCCHECK reports errors on XSLT sources
    cheers,
    Vincent

  • MASS change of the business partner name

    Hi All,
    I have an immediate requirement to do a mass change of the business partner names.  I used the Tcode MASS but not sure of the procedure. Can anyone kindly guide me how to go about processing the mass change?
    Thanks,
    Venkat.

    Hello Venkat,
    Have a look at SAP Note 802804. This should help.

  • Update the original system software in my iPhone 4?

    Update the original system software in my iPhone 4?
    I am helping a friend having problems updating the system in her iPhone 4.
    She has verizon service for the phone. She owns an iMac G5 running 10.4.11.
    When she plugs her iphone 4 into her iMac G5 she can't get past an error saying
    tht her computer system software is to old to update the iPhone 4.
    I am sure there are many people using new iphones with older computers,system.
    There should be some way to update her iPhone 4 to iOS 4.3.4 Software Update
    with her iMac G5. If not, what about doing it with my up to date Intel Mac Pro?
    I can't believe that buing a new iPhone forces you to buy a new computer to keep
    it up to date? That is not like Apple at all. Thank you for your time and patience.
                                                                                                                                W.W.

    Basically, this is correct.  If she has a Mac running 10.4.11, then she is unable to download iTunes 7, which is what you need to be able to update to the latest software - iOS6.0.1 or use an iPhone 5.
    To be able to update your Mac to iTunes 7, you need to have Snow Leopard or above installed, Snow Leopard being 10.6 and you also need an Intel Mac to be able to instal Snow Leopard.  Apple are sending people free upgrade DVD's of Snow Leopard so that you can upgrade if applicable and then from there and once you have upgraded you can get the Mac App Store where you can then download Lion and Mountain Lion.  All upgrades are then CD free.
    There is no point in her upgrading from your Mac, because it won't then sync with any of her own things that she has.
    Either she will have to leave her phone the way it is or wait until she is ready to purchase a new and more up to date Mac and then go from there.
    Mac OS 10.4 is old now in computer terms, so it does pay to keep your system and computers reasonably up to date as and when you can afford it, but especially the OS.

  • Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas?

    Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas? It uses the latest version of Mavericks. Thanks!

    If the C key for Install Disc or R Command for OS X Recovery startup commands are not working, try holding the Option key for the Startup Manager.
    see > Startup Manager: How to select a startup volume
    If that does not work and you using a wireless keyboard, it may have become unpaired and you need to dig up a USB keyboard to invoke the startup commands.
    For more on gray screen, see > Mac OS X: Gray screen appears during startup

  • Program for mass change in the sales order.

    Hi,
      I have a requirement where If we make changes in  the availability check rule of the material master(for e.g. 02 to 01),then the same rule should be changed in the sales order as well.
      Though this will be changed for the new orders but is there any program which we can run manually or in the background in order to make changes in the old sales orders.
    Regards
    Karan

    Hi,
            U cannot change checking group or checking rule for availabillity check at sales order level, u can change requirements type.
            If u want to change requirements type determined into sales orders, which  r already created go to t.code MASS and select the object type sales orders and press execute, select sales order item data on tables tab,and select requirements type on fields tab and press execute.specify sales documents number from and to and item numbers, and press execute and specify the new value and press carryout mass change button and then save.
    with regards,
    kirankumar vemula

  • Is it possible to re-install again after the original system crashed?

     I got virus infection yesterday that made my computer system crash. Can I restore it by using the original operating system?
    Thanks!

    Yes.  You can either restore your system from a backup or do a clean install of Windows 7.  Either way be sure to clean your HDD to remove any viral infection before restoring.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Maybe you are looking for