Mass Change of Uses in Quality Plan

Dear SAPians,
                     How can we make a mass change in uses ( i.e. from '05' to '03' in Quality plans ) other then a use of LSMW. 
Thanks.

Dear Atul,
It think if you are trying to copy the plan with CWBQM, don't try it. It will not work like that.
But yes if you want to change any field of the inspection plan in mass it will work perfectly.
You asked to change the usage of the inspection plans in mass, then it will surely work.
Current Working Are: It defines.........
- Which focus is to be used, that is which object type the selection criteria refer to.
- Which object types can be displayed and processed.
- Whether objects are automatically locked for changing by other users, and which objects these are.
You can select any of the Wrok Area
"Q_OPR_000000000010" Will have the focused are at Operation level of the Inspection plan and will lock the Operation level data for the Task list while you will be executing the workbench. at the other hand "Q_TSK_000000000010" will have focus at Header level data only and will lock the Header level details while working at CWBQM.
Now it you have to decide what you want to do If you need only the operation level details to be locked for the Inspection plan and go with Q_OPR_000000000010 and If you wish the entire task list get locked, no one should access the task list from header level it self during the CWBQM execution, go with Q_TSK_000000000010.
Don't put any data at "BASIC Selection Criteria"
Where you have enter the task list type "Q", see just above this section, there is a Button "ADDITIONAL SELECTION CRITERIA"  is there, click on it and you will have more selection fields available.
To change (Again I will say to change  not to Copy) the details at MIC level don't execute the "Load Task list" instead press "Ctfl + F7"
Regards,
Shyamal

Similar Messages

  • Quality plan as per production version

    Hi SAP gurus,
    My client has multiple Production versions and they want to use different Quality plan as per version , how  I can map this process in SAP.
    I tired using in production version by putting Qualiity plan instaed of routing,  Inpection lot is created but when it come for the production order it was asking for the routing / or operation generation.
    As few specfication of Quality plan is different , that is the reason Plan has to be specific to PV.
    Thanks in advance.

    Hi
    Even if you create a Inspection plan you might have observed in the production version you have to specify the Routing.
    Reason is syem will check the routing for cost collector in production order.
    what you can do is may be you can carry out inprocess inspection with routing & specify the char in the task list
    or
    You may have to go for userexit while selection of the task list you will select the appropriate task list with appropraite prod version
    Also if you creat two inspection plan with two gr counters & do not tick on "Auto Assign" in the QM view,
    System will create a lot of 04 with CRTD status.
    In QA02 you can go & manually attach the relevent task list.
    What you can do is create a Group with name of "prod version" itself.This will ease the attaching of the tak list to the the lot.
    I hope this will add some value.
    Regards
    Sujit

  • Automatic Firmed Planned Order / Mass Change Planned Order

    Hi PP Gurus,
    My requirement is I want to make all planned order created from planning run will be automatically firmed. I tried several option :
    1. MRP type : P1, automatic create firmed planned order within planning time fence but for new requirement, planned order will be created after planning time fence date. Example planning time fence date lies on 20/10/2011
    PIR
    09/2011     3 pc
    10/2011     4 pc
    end of planning time fence date
    11/2011     5 pc
    run MRP
    Planned order firmed for month 9 and 10. for 11 is not firmed. But the problem is if PIR on month 10 is change from 4 to 6. the other 2 planned order will be created at end of planning time fence date.
    Is it possible for planned order created at appropriate date as requirement date ???
    2. Mass Change of Planned Order
    I browse the help SAP there is function module : MD_SET_ACTION_PLAF for mass changes of planned orders.
    http://help.sap.com/saphelp_46c/helpdata/en/9e/e84226c1c311d3b54a0004ac160649/content.htm
    I execute it with SE37 but i don't know what should i do with this function module after the next screen.
    In my mind, there will be selection screen for choosing which planned order will be perform firmed action.
    Any other idea to solve my requirement is welcome.
    Regards,
    Arman Lie

    Dear Arman,
    Use T.Code MD19 for firming the planned orders,also check MDBA for firming the planned order.
    For your first question let me check and revert back.
    Regards
    Mangalraj.S

  • Change Quality plan by changing MIC

    hi all,
    pls anybody can help me in following matter.
    my MIC is incomplete copy model and i have used it in 1000 Quality plans.
    now i want to make few changes in mic which i want in all 1000 plans.
    how can i do that with minimum efforts?

    Sandip,
    I would suggest you to create a new MIC and use transaction "QS27" to replace the old one with new one.
    Hope this helps...Reward your points and close the thread,
    Regards,
    Prasobh

  • Mass change 'Planning group'

    Hi,
    I want to run heuristics SAP_PP_002 according to the planning group. But the field 'planning group' in /SAPAPO/MAT1 is null. How to mass change the field 'planning group'?
    Thank you,
    Rui

    Rui,
    You can use the MASSD transaction to update these values.
    Use "Enhanced Product" in the Object Type field, build your selection as you like.
    Under Components and Attributes to Be Maintained," use the drop-down on Component.  Under the "Location Dependent Data" group look for the "Planning Group" attribute.  Select it.
    You should be able to continue from there if you are familiar with MASSD.  NB:  Be extremely careful using MASSD.  It is very easy to create problems you cannot undo.
    Jeff

  • System audit trail for FBL5N and Mass Change use

    Hello,
    My client carried out the foll actions yesterday.
    Called TCode FBL5N using a range of customers
    When the line items were displayed, they selected some of them and then went into Environment - Mass Change - New Values
    Here they input a new value to the Dunning Block field.
    Then they saved it and came out.
    Later they realized that they should not have made the changes to some of the records. Unfortunately, now they dont remember either the customer range for which they had run FBL5N or the line items which they had changed.
    So, the question is: is there any way by studying the audit trail or system history, one can find out which are the documents/line items that were changed yesterday within a specific time frame using TCode FBL5N and then Mass Change?
    Please see if you can provide some input.
    Regards,
    Suvarghya Dutta

    Hello,
    It must have been kept to "All"
    From future, all your transactions will have security audit log.
    If you want to see the system log, then visit SM21.
    Regards,
    Ravi

  • Plan changing when using variables instead of constant

    Hi,
    I have a query, when run with the constant values uses a better plan. But when these constants are replaced with variables, plan is changing and taking much longer time to complete. I don't want the query to use a different plan when using the variables in place of constants.
    Please help.
    Thanks

    Probably you got caught by bind variable peeking (if the plans are same for both variables)
    If you have default 10g Statistics gathering job it means you are collecting histograms
    If my bind peeking + histogram assumption is true Check this link to fight with peeking
    http://www.pythian.com/news/867/stabilize-oracle-10gs-bind-peeking-behaviour-by-cutting-histograms
    if deleting histograms doesnt help
    check this link
    http://www.oracloid.com/2006/07/bind-variable-peeking-with-no-histograms/
    A. Coskan GUNDOGAR
    Oracle DBA
    http://coskan.wordpress.com
    ““Knowledge is of no value unless you put it into practice.”.”
    Anton Chekhov

  • Changed MIC in quality plan for new lot.....

    Hi All,
    I created quality plan for one material and did result recording.
    Now again new lot is created for same material but this time I donu2019t want to check same MIC what I did last time.
    I deleted the pervious MIC and added new MIC what I want to check. After doing that again I went to QA32 to do RR for new MIC but its showing pervious one.  
    So what I have to do.
    Please suggest me.
    Regards,
    Siddharth shanker

    Dear Siddharth,
    I created quality plan for one material and did result recording.
    No issue this  is fine.
    Now again new lot is created for same material but this time I donu2019t want to check same MIC what I did last time.
    If you don't want to check same MIC's there are two options :
    a) Go to insp plan delete / overwrite the MIC and save,  please ensure that  your lot is generated after this change is made. new plan will be applied.
    b) Make a separate  task list  with  other set of MIC's  and while assigning the task list  to inspection lot you can select the desired one.
    I deleted the pervious MIC and added new MIC what I want to check. After doing that again I went to QA32 to do RR for new MIC but its showing pervious one.
    Pl check when  the lot has been generated, if it is generated  before you have done the changes  then  lot will not show new MIC's. for that you have to go to QAC3 to reset the insp lot.
    Best Regards,
    Shekhar

  • Mass change of Production orders operations in ECC 6.0 using COOIS

    Dear experts,
    Kindly Suggest a way to mass change of direct operations and components overview screen of production orders in ECC6.0
    using COOIS transaction code which was available in SAP 4.7 using environment >change order> operations or components once we execute the COOIS with certain input parameters in the out put screen,this function seems to be not available in ECC 6.0 , if available kindly guide me or any alternative way to perform the same.
    Thanks in advance for your inputs and help..
    Best regards,
    Nitish jain

    You have that button "Change Order" you can just click on it and once you're in the change mode of the order click "Component Overview" button , it's the same number of clicks...
    Anyway, SAP has changed the entire ALV for all the transaction codes using PPIO_ENTRY (COOIS, CO26, CO27, CO28 et al)
    look at question 12
    https://service.sap.com/sap/support/notes/540779
    if you really want your old GUI status. there is a way to get it back. In SE38 enter the program name PPIO_ENTRY and select variants and click display. Once you're in variants screen enter variant name and click create and select all "screens" check box and then it will take you the selection screen in there check the box "Old ALV Display" in the Technical settings sub screen. (If you want you can choose other functions also like "Selection List" as PPIOM000 Always display components directly etc. if you want ) Click on "Next Screen" button and it will show "Attributes" button then click on the attributes button and save it.
    Now go to SE93, make a copy of transaction COOIS to ZOOIS and in the variant field enter the variant you just created. The new transaction will always start with the variant you just created and it will look like your old COOIS with Environment > Change Order > Components will be visible.
    Edited by: Jeevan Sagar on Oct 20, 2011 9:50 AM

  • MM - Pricing Conditions - Mass Change for Planned delivery costs

    Dear gurus,
    Is there way to mass change the value of pricing conditions of Planned Delivery costs in the PO? Also the supplier?
    Any suggestion?
    Many Thanks for helping,
    Maria

    Hi,
    As far as I know, this can be done for condition type/vendor price maintained in info. record.
    Transaction code: MEKP
    Enter the condition type, enter the '+' sign if value is to be raised.
    If you tick the 'Test Run' you can also simulate the condition (old v/s New).
    Hope this helps!!
    Reetesh

  • Is it possible to mass change desktop wall paper for all users using WGM?

    is it possible to mass change desktop wall paper for all users using WGM?

    yes, it's easy - change a machine to the desktop you want (the image must be on all the machines, with the same name, of course), find ~/library/preferences/com.apple.desktop.plist Copy that to your server (or just put it on a flash drive) In workgroup manager select preferences - details - "add". Navigate to that plist. (Optional - hit "edit" and cut and past from "often" to "always", then the user cannot change the desktop at all, if you leave it in "often" it will reset next log-on.)

  • How to find out if SQL execution plan is changed proactively using job/grid

    Hello,
    Can you help me on How to find out if SQL execution plan is changed proactively using job/grid control?
    Thank you..
    -

    The answers so far are supposed to show ways how to see that a plan changed after the fact - that is not really proactive but that was the question.
    A way to see a plan change proactively would be to create a SQL Plan Baseline for the SQL statement with the 'good old' plan and then watch DBA_SQL_PLAN_BASELINES for new rows with that SQL_HANDLE which would indicate that a new execution plan was computed - although not yet used.
    Kind regards
    Uwe Hesse
    "Don't believe it, test it!"
    http://uhesse.com

  • Mass change of Vendor Line Items Payment Terms

    Hi all
    We are trying to make a mass change of payment terms for vendor line items.  We have implemented the change required as per SAP note 640908. However when we try to do this not all payment terms are changed.
    The log gives us the following error - 'Field BSEG-ZTERM. does not exist in the screen SAPMF05L 1302'.
    Please how can we solve this error.
    Many thanks
    PRG

    Hi,
    According to note 640908:
    " Notes on error handling:
        If the mass change does not occur as required even though you
        changed and activated all program parts, note that the error log
        for the mass change (Environment -> Mass change -> Error log of
        line item list) may contain useful information for error
        handling."
    " Note: SAP cannot guarantee that the modified mass change will work
      correctly even if you carry out all of the steps as described in the
      manual tasks."
    It is not planned to enter the payment terms by using of
    the field payment term ZTERM but by using of the fields ZBD1T/ZBD1P and
    ZBD2T/ZBD2P and ZBD3T.
    With Best Regards,
    Gladys Xing

  • Change End date of billing plan/invoice plan in sales order item(fpla-erdat

    Hi Experts,
    Could you please help to me regarding this issue.
    I need to change  End date of billing plan/invoice plan  in sales order item  of  "billing plan" Tab.( FPLA-ERDAT) for all line items. It is not a one sales order,more than 1000 sales orders.
    How can i change those end date of billing plan for all line litems and all sales orders ( i have input file with sales orders, items, dates.)
    Thanks
    jaya

    Hi ramki,
    I tried with using  MASS  T.code ( bus2032 Object type).
    There are no field  related to Billing plan end date?.if case i done wrong ,tell me what are steps while using MASS T.code.
    now what i can do. or explain
    Thanks
    jaya

  • Vendor Master- Mass change to set block function 02 for selected PurchOrg

    Hello,
    We are using SAP 4.7.
    We want to do Vendor Master- Mass change to set block function 02 (T code- MK05 in block for quality reasons) for selected Purchasing Organizations to approximately 2000 number of vendors. I tried this using mass maintenance (T code XK99), but in this case block function of all purchasing organisations gets changed. We want it for certain purchasing organisations only. Kindly suggest the solution.
    In case I have to go for a development can you please suggest any functional module/ BAPI?
    Can I achieve this using mass maintenance functionality (XK99)?
    Waiting for your expert openion,
    Regards,
    Milind Dumbre

    Using the block function in XK05 will block the vendor for all purchasing organizations (as mentioned in the documentation of the field). What you can do is to use purchasing block for the selected purchasing organization.
    The field is LFM1-SPERM, and this can be done via mass maintenance using XK99.
    Hope this helps.
    Regards,
    Aroop

Maybe you are looking for